Volatile Organic Compounds as Insect Repellents and Plant Elicitors: an Integrated Pest Management (IPM) Strategy for Glasshouse Whitefly (Trialeurodes vaporariorum).

The glasshouse whitefly (Trialeurodes vaporariorum Westwood) is a polyphagous arthropod pest that is of particular detriment to glasshouse grown tomato (Solanum lycopersicum) across temperate regions of the world. Control of whiteflies with synthetic pesticides has resulted in the evolution of resistant genotypes and a reduction in natural enemies, thus highlighting the need for environmentally sound control strategies. Volatile organic compounds (VOCs) offer an environmentally benign alternative to synthetic chemical sprays and this study explored the use of VOCs as insect repellents and plant defence elicitors to control whiteflies on tomato in a commercial glasshouse setting. Limonene in the form of a volatile dispenser system was found to successfully repel whitefly from the target crop and increased fruit yield by 32% during a heavy whitefly infestation. Analysis of tomato herbivore induced plant volatiles (HIPVs) led us to select methyl salicylate (MeSA) as the plant elicitor and application of MeSA to un-infested tomato plants was found to successfully reduce whitefly population development and increase yield by 11%, although this difference was marginally statistically significant. Combination of these two methods was also effective but whitefly abundance in combined plots was similar to the standalone limonene treatment across the course of the experiment. All of the VOC based control methods we used had a negative impact on whitefly performance, with more pronounced effects during the first few weeks of infestation. In subsequent laboratory experiments, we found elevated peroxidase (POD) activity and a significant increase in TPX1 and PR1 transcripts in MeSA treated plants. This led us to deduce that MeSA immediately induced plant defences, rather than priming them. We did however see evidence for residual priming, as plants treated with MeSA and infested with whiteflies produced significantly higher levels of POD activity than whitefly infestation alone. Despite the fact that our treatments failed to synergise, our methods can be optimised further, and the effectiveness of the standalone treatments is promising for future studies. In particular, our repellent limonene dispensers were extremely effective at deterring whiteflies and offer a low economic cost and easy to implement whitefly control option. The methods we have used here could be incorporated into current integrated pest management (IPM) systems, a sustainable approach to pest control which will be central to our efforts to manage whitefly populations under glass in the future.

Effect of composite warming on shear bond strength.

Several manufacturers produce devices designed to warm composite resins used in restorative dentistry. Previous investigators have examined the effects of heating composite restorative resins prior to placement and polymerization. Heating has been reported to reduce viscosity, improve ease of placement, enhance monomer conversion, and reduce microleakage. The aim of the present study was to compare shear bond strengths of room temperature (22°C) and prewarmed (54°C) restorative composite resin. Extracted bovine mandibular incisors were sectioned sagittally and embedded in acrylic cylinders. Enamel was selectively etched with 37% phosphoric acid, rinsed, and dried. Self-etching primer was applied to both enamel and dentin. Self-etching adhesive was then applied and photopolymerized. Composite resin capsules were then divided into prewarmed and room temperature groups. Fourteen composite specimens prewarmed in an incubator were applied to the prepared enamel and dentin and photopolymerized. Fourteen room temperature composite specimens were likewise placed. After storage in water for 24 hours, all composite specimens were subjected to shear stress testing. The resulting data were analyzed with a t test (P = 0.05). There was no statistically significant difference between the shear bond strengths of the prewarmed and room temperature composite resin specimens. Warming does not appear to affect bond strength of composite resin bonded to both dentin and enamel.

Novel resistance mechanisms of a wild tomato against the glasshouse whitefly.

The glasshouse whitefly, Trialeurodes vaporariorum, is an important pest of many crop plants including tomato, Solanum lycopersicum. Many wild tomato species exhibit a higher resistance to whiteflies. Therefore, locating the source of this enhanced resistance and breeding it into commercial tomato species is an important strategy to reduce the impact of pests on crops. Here, we assessed the pest resistance of Lycopersicon pimpinellifolium by comparing oviposition and feeding data from T. vaporariorum on this wild tomato species with data collected from a susceptible commercial tomato, S. lycopersicum var. 'Elegance'. The location of resistance factors was examined by use of electrical penetration graph (EPG) studies on these tomato species. Results show that whiteflies preferentially settled on the commercial tomato more often in 80 % of the replicates when given free choice between the two tomato species and laid significantly fewer eggs on L. pimpinellifolium. Whiteflies exhibited a shorter duration of the second feeding bout, reduced pathway phase probing, longer salivation in the phloem and more non-probing activities in the early stages of the EPG on the wild tomato species compared to the commercial tomato. These findings evidence that a dual mode of resistance is present in this wild tomato against T. vaporariorum: a post-penetration, pre-phloem resistance mechanism and a phloem-located factor, which to the best of our knowledge is the first time that evidence for this has been presented. These findings can be used to inform future breeding strategies to increase the resistance of commercial tomato varieties against this important pest.

Comparison of state dental radiography safety regulations.

The aim of this study was to compare and provide an overview of state policies on occupational exposure, dosimetry, collimation, patient protection, and the use of portable handheld X-ray machines in dentistry. State government webpages containing radiation protection rules and regulations were scanned. The contents were compared against current federal regulations established by the Nuclear Regulatory Commission (NRC) and the US Food and Drug Administration (FDA). They were further evaluated in light of current recommendations from the National Council on Radiation Protection & Measurements (NCRP) and the American Dental Association (ADA). Most states' regulations mirror the exposure limits set forth by the NRC and FDA. Nonregulatory recommendations regarding use of dental radiography are periodically put forth by the NCRP and the ADA. State and federal agencies often follow recommendations from these scientific organizations when creating regulations. Clinicians must be aware of their state's radiation protection rules, as variations among states exist. In addition, recommendations published by organizations such as the NCRP and the ADA, while not legally binding, contribute significantly to the reduction of radiation risks for operators and patients alike.

Effects of mixing technique on bubble formation in alginate impression material.

Previous studies have found that variations in mixing technique can influence the porosity content of alginate impression material. The aim of this study was twofold: determine whether bubble formation in alginate is influenced by the sequence of water/powder addition prior to mixing, and to compare 4 different mixing techniques. Manual spatulation, an automated spinning bowl, a centrifugal mixer and a vacuum mixer were evaluated for the resulting porosity in the set alginate. It was found that adding powder first, versus water first, made no difference in the bubble content using the 3 automated mixing techniques (P = 0.714). However, porosity was significantly less for powder-first trials using manual spatulation (P < 0.05). It was also found that surface porosity in the resulting impressions was significantly less for centrifugal and vacuum mixing when compared to manual spatulation, while internal porosity was significantly less for centrifugal mixing compared to all other mixing techniques (P < 0.05). The centrifugal mixing and vacuum mixing techniques required the least amount of mixing time.

Companion planting with French marigolds protects tomato plants from glasshouse whiteflies through the emission of airborne limonene.

Horticulturalists and gardeners in temperate regions often claim that planting marigolds next to tomato plants protects the tomatoes from the glasshouse whitefly (Trialeurodes vaporariorum Westwood). If shown to hold true, this technique could be used in larger-scale tomato production, protecting the crop and helping to introduce greater plant diversity into these agro-ecosystems. Here we present two large-scale glasshouse trials corresponding to the two main ways growers are likely to use marigolds to control whiteflies. In the first, marigolds are grown next to tomato throughout the growing period and we quantify whitefly population growth from the seedling stage over a 48 day infestation period. Here we show that association with marigolds significantly slows whitefly population development. Introducing additional whitefly-attractive 'pull' plants around the perimeter of plots has little effect, but reducing the proportion of marigolds and introducing other non-hosts of whiteflies (basil, nasturtium and Chinese cabbage) also reduces whitefly populations on tomato. The second experiment assesses the efficacy of marigolds when used as an 'emergency' measure. Here we allow whitefly populations to build to a high density on unprotected tomatoes then introduce marigolds and assess whitefly population over a further period. Following laboratory work showing limonene to be a major chemical component of French marigolds and a negative behaviour response of whiteflies to this compound, limonene dispensers are added as an additional treatment to this experiment. "Emergency" marigold companion planting yielded minimal reductions in whitefly performance, but the use of limonene dispensers was more effective. Our work indicates that companion planting short vine tomatoes with French marigolds throughout the growing season will slow development of whitefly populations. Introducing marigolds to unprotected tomatoes after significant whitefly build-up will be less effective. The use of limonene dispensers placed near to tomato plants also shows promise. It is argued that this work supports the possibility of the development of a mixture of tomato companion plants that infer 'associational resistance' against many major invertebrate pests of tomato. Such a mixture, if comprising edible or ornamental plants, would be economically viable, would reduce the need for additional chemical and biological control, and, if used outdoors, would generate plant-diverse agro-ecosystems that are better able to harbour invertebrate wildlife.

Bacterial contamination of clinical examination gloves.

Dental clinicians have been wearing examination gloves routinely during clinical procedures since 1986, when the CDC advised using them as part of standard personal protective equipment recommendations. Initially, latex was virtually the only material available for examination glove construction; however, in recent years, numerous other materials have been utilized for glove construction in response to the increased recognition of latex allergies among patients and dental health care workers. Examination gloves are marketed as "non-sterile" according to the FDA, which sets specific standards governing the manufacturing and distribution of these products. This study examined the prevalence of bacterial organisms present in a variety of freshly opened glove boxes. The same glove boxes were put into clinical use for a period of time and re-tested for the presence of bacteria. The quantity of bacteria present on gloves in the new boxes differed in comparison to the gloves that remained in the used boxes.

Effective use of e-grading in the dental simulation clinic.

The purpose of this article is to describe the development and implementation of a grading software system, accessible from any platform, that engages today's generation of students and replaces paper grading. Set up at one U.S. dental school in an all-access, anytime (24/7) web-based program accessed through tablets, the software allows for a comparison between students' self-grading and instructor grading. This comparison facilitates student-faculty interaction, promoting discussion and student learning. The software can also be used for practical examination grading in which blinded grading between instructors is possible. The data gathered can produce descriptive reports students can draw upon to encourage self-learning and guided learning, propelling students to a better understanding of critical principles as they progress through multiple psychomotor skill sets. Other reports generated by the software allow for instructor calibration, exporting of grades directly into the university grading report system, and visual analysis of trends within each class. In a post-course survey, students (56 percent response rate) and faculty (79 percent response rate) agreed that the electronic grading was more efficient and allowed more time for faculty-student interaction than the previous grading system, thus creating an environment more conducive to learning. Overall, the software has improved students' perception of enhanced kinetic skills, while facilitating administration of preclinical projects and practical examinations.