In Vitro Nasal Tissue Model for the Validation of Nasopharyngeal and Midturbinate Swabs for SARS-CoV-2 Testing.

Large-scale population testing is a key tool to mitigate the spread of respiratory pathogens, such as the current COVID-19 pandemic, where swabs are used to collect samples in the upper airways (e.g., nasopharyngeal and midturbinate nasal cavities) for diagnostics. However, the high volume of supplies required to achieve large-scale population testing has posed unprecedented challenges for swab manufacturing and distribution, resulting in a global shortage that has heavily impacted testing capacity worldwide and prompted the development of new swabs suitable for large-scale production. Newly designed swabs require rigorous preclinical and clinical validation studies that are costly and time-consuming (i.e., months to years long); reducing the risks associated with swab validation is therefore paramount for their rapid deployment. To address these shortages, we developed a 3D-printed tissue model that mimics the nasopharyngeal and midturbinate nasal cavities, and we validated its use as a new tool to rapidly test swab performance. In addition to the nasal architecture, the tissue model mimics the soft nasal tissue with a silk-based sponge lining, and the physiological nasal fluid with asymptomatic and symptomatic viscosities of synthetic mucus. We performed several assays comparing standard flocked and injection-molded swabs. We quantified the swab pickup and release and determined the effect of viral load and mucus viscosity on swab efficacy by spiking the synthetic mucus with heat-inactivated SARS-CoV-2 virus. By molecular assay, we found that injected molded swabs performed similarly or superiorly in comparison to standard flocked swabs, and we underscored a viscosity-dependent difference in cycle threshold values between the asymptomatic and symptomatic mucuses for both swabs. To conclude, we developed an in vitro nasal tissue model that corroborated previous swab performance data from clinical studies; this model will provide to researchers a clinically relevant, reproducible, safe, and cost-effective validation tool for the rapid development of newly designed swabs.

Preclinical Validation of a Novel Injection-Molded Swab for the Molecular Assay Detection of SARS-CoV-2.

During the COVID-19 public health emergency, many actions have been undertaken to help ensure that patients and health care providers have timely and continued access to high-quality medical devices to respond effectively. The development and validation of new testing supplies and equipment, including collection swabs, has helped to expand the availability and capability for various diagnostic, therapeutic, and protective medical devices in high demand during the COVID-19 emergency. Here, we report the initial validation of a new injection-molded anterior nasal swab, ClearTip™, that was experimentally validated in a laboratory setting as well as in independent clinical studies in comparison to gold standard flocked swabs. We have also developed an in vitro anterior nasal tissue model which offers a novel, efficient, and clinically relevant validation tool to replicate the clinical swabbing workflow with high fidelity, while being accessible, safe, reproducible, and time- and cost-effective. ClearTip™ displayed greater inactivated virus release in the benchtop model, confirmed by its greater ability to report positive samples in a small clinical study in comparison to flocked swabs. We also quantified the detection of biological materials, as a proxy for viral material, in multi-center pre-clinical and clinical studies which showed a statistically significant difference in one study and a reduction in performance in comparison to flocked swabs. Taken together, these results emphasize the compelling benefits of non-absorbent injection-molded anterior nasal swabs for COVID-19 detection, comparable to standard flocked swabs. Injection-molded swabs, as ClearTip™, could have the potential to support future swab shortages, due to its manufacturing advantages, while offering benefits in comparison to highly absorbent swabs in terms of comfort, limited volume collection, and potential multiple usage.

In Vitro Nasal Tissue Model for the Validation of Nasopharyngeal and Mid-turbinate Swabs for SARS-CoV-2 Testing.

Large-scale population testing is a key tool to mitigate the spread of respiratory pathogens, as in the current COVID-19 pandemic, where swabs are used to collect samples in the upper airways (e.g. nasopharyngeal and mid-turbinate nasal cavities) for diagnostics. However, the high volume of supplies required to achieve large-scale population testing has posed unprecedented challenges for swab manufacturing and distribution, resulting in a global shortage that has heavily impacted testing capacity world-wide and prompted the development of new swabs suitable for large-scale production. Newly designed swabs require rigorous pre-clinical and clinical validation studies that are costly and time consuming ( i . e . months to years long); reducing the risks associated with swab validation is therefore paramount for their rapid deployment. To address these shortages, we developed a 3D-printed tissue model that mimics the nasopharyngeal and mid-turbinate nasal cavities, and we validated its use as a new tool to rapidly test swab performance. In addition to the nasal architecture, the tissue model mimics the soft nasal tissue with a silk-based sponge lining, and the physiological nasal fluid with asymptomatic and symptomatic viscosities of synthetic mucus. We performed several assays comparing standard flocked and injection-molded swabs. We quantified the swab pick-up and release, and determined the effect of viral load and mucus viscosity on swab efficacy by spiking the synthetic mucus with heat-inactivated SARS-CoV-2 virus. By molecular assays, we found that injected molded swabs performed similarly or superiorly in comparison to standard flocked swabs and we underscored a viscosity-dependent difference in cycle threshold values between the asymptomatic and symptomatic mucus for both swabs. To conclude, we developed an in vitro nasal tissue model, that corroborated previous swab performance data from clinical studies, with the potential of providing researchers with a clinically relevant, reproducible, safe, and cost-effective validation tool for the rapid development of newly designed swabs.

The RADx Tech Test Verification Core and the ACME POCT in the Evaluation of COVID-19 Testing Devices: A Model for Progress and Change.

Faced with the COVID-19 pandemic, the US system for developing and testing technologies was challenged in unparalleled ways. This article describes the multi-institutional, transdisciplinary team of the "RADxSM Tech Test Verification Core" and its role in expediting evaluations of COVID-19 testing devices. Expertise related to aspects of diagnostic testing was coordinated to evaluate testing devices with the goal of significantly expanding the ability to mass screen Americans to preserve lives and facilitate the safe return to work and school. Focal points included: laboratory and clinical device evaluation of the limit of viral detection, sensitivity, and specificity of devices in controlled and community settings; regulatory expertise to provide focused attention to barriers to device approval and distribution; usability testing from the perspective of patients and those using the tests to identify and overcome device limitations, and engineering assessment to evaluate robustness of design including human factors, manufacturability, and scalability.

A novel class of endotoxin receptor agonists with simplified structure, toll-like receptor 4-dependent immunostimulatory action, and adjuvant activity.

A series of novel, synthetic compounds containing lipids linked to a phosphate-containing acyclic backbone are shown to have similar biological properties to lipopolysaccharide (LPS). These compounds showed intrinsic agonistic properties when tested for their ability to stimulate tumor necrosis factor-alpha in human whole blood and interleukin-6 in U373 human glioblastoma cells without added LPS coreceptor CD14. The presence of the LPS antagonist E5564 completely blocked responses, suggesting that the novel compounds and LPS share a common mechanism of cell activation. Stereoselectivity of the molecules was observed in vitro; compounds with an R,R,R,R-configuration were strongly agonistic, whereas compounds with an R,S,S,R-configuration were much weaker in their activity on human whole blood and U373 cells. We also tested the effect of the compounds in cells transfected with the LPS receptor Toll-like receptor 4 (TLR4), with similar results, further supporting a shared mechanism with LPS. This was confirmed in vivo where the agonists failed to elicit cytokine responses in C3H/HeJ mice lacking TLR4 signaling. Because LPS-like molecules enhance immune responses, the compounds were mixed with tetanus toxoid and administered to mice in an immunization protocol to test for adjuvant activity. They enhanced the generation of specific antibodies against tetanus toxoid. Our results indicate that these unique compounds behave as agonists of TLR4, resulting in responses similar to those elicited by LPS. They display adjuvant activity in vivo and may be useful for the development of vaccine therapies.