Resonant Energy Transfer can Trigger Multiexciton Recombination in Dense Quantum Dot Ensembles.

Core/shell quantum dots/quantum rods are nanocrystals with typical application scenarios as ensembles. Resonance energy transfer is a possible process between adjacent nanocrystals. Highly excited nanocrystals can also relax energy by multiexciton recombination, competing against the energy transfer. The two processes have different dependencies and can be convolved, resulting in collective properties different from the superposition of the individual nanocrystals. A platform to study the interplay of energy transfer and multiexciton recombination is presented. CdSe/CdS quantum dot/quantum rods encapsulated in amphiphilic micelles with an interparticle distance control by spacer ligands are used for time-resolved photoluminescence and transient absorption experiments. At exciton populations around one, the ensemble starts to be in a state where energy transfer can trigger multiexciton Auger recombination, altering the collective dynamics.

Metal-Semiconductor Nanoparticle Hybrids Formed by Self-Organization: A Platform to Address Exciton-Plasmon Coupling.

Hybrid nanosystems composed of excitonic and plasmonic constituents can have different properties than the sum of of the two constituents, due to the exciton-plasmon interaction. Here, we report on a flexible model system based on colloidal nanoparticles that can form hybrid combinations by self-organization. The system allows us to tune the interparticle distance and to combine nanoparticles of different sizes and thus enables a systematic investigation of the exciton-plasmon coupling by a combination of optical spectroscopy and quantum-optical theory. We experimentally observe a strong influence of the energy difference between exciton and plasmon, as well as an interplay of nanoparticle size and distance on the coupling. We develop a full quantum theory for the luminescence dynamics and discuss the experimental results in terms of the Purcell effect. As the theory describes excitation as well as coherent and incoherent emission, we also consider possible quantum optical effects. We find a good agreement of the observed and the calculated luminescence dynamics induced by the Purcell effect. This also suggests that the self-organized hybrid system can be used as platform to address quantum optical effects.

Bio-orthogonal Coupling as a Means of Quantifying the Ligand Density on Hydrophilic Quantum Dots.

We describe the synthesis of two metal-coordinating ligands that present one or two lipoic acid (LA) anchors, a hydrophilic polyethylene glycol (PEG) segment and a terminal reactive group made of an azide or an aldehyde, two functionalities with great utility in bio-orthogonal coupling techniques. These ligands were introduced onto the QD surfaces using a combination of photochemical ligation and mixed cap exchange strategy, where control over the fraction of azide and aldehyde groups per nanocrystal can be easily achieved: LA-PEG-CHO, LA-PEG-N3, and bis(LA)-PEG-CHO. We then demonstrate the application of two novel bio-orthogonal coupling strategies directly on luminescent quantum dot (QD) surfaces that use click chemistry and hydrazone ligation under catalyst-free conditions. We applied the highly efficient hydrazone ligation to couple 2-hydrozinopyridine (2-HP) to aldehyde-functionalized QDs, which produces a stable hydrazone chromophore with a well-defined optical signature. This unique optical feature has enabled us to extract a measure for the ligand density on the QDs for a few distinct sizes and for different ligand architectures, namely mono-LA-PEG and bis(LA)-PEG. We found that the foot-print-area per ligand was unaffected by the nanocrystal size but strongly depended on the ligand coordination number. Additionally, we showed that when the two bio-orthogonal functionalities (aldehyde and azide) are combined on the same QD platform, the nanocrystal can be specifically reacted with two distinct targets and with great specificity. This design yields QD platforms with distinct chemoselectivities that are greatly promising for use as carriers for in vivo imaging and delivery.

A universal approach to ultrasmall magneto-fluorescent nanohybrids.

Seeded emulsion polymerization is a powerful universal method to produce ultrasmall multifunctional magnetic nanohybrids. In a two-step procedure, iron oxide nanocrystals were initially encapsulated in a polystyrene (PS) shell and subsequently used as beads for a controlled assembly of elongated quantum dots/quantum rods (QDQRs). The synthesis of a continuous PS shell allows the whole construct to be fixed and the composition of the nanohybrid to be tuned. The fluorescence of the QDQRs and magnetism of iron oxide were perfectly preserved, as confirmed by single-particle investigation, fluorescence decay measurements, and relaxometry. Bio-functionalization of the hybrids was straightforward, involving copolymerization of appropriate affinity ligands as shown by immunoblot analysis. Additionally, the universality of this method was shown by the embedment of a broad scale of NPs.

Polymer-assisted self-assembly of superparamagnetic iron oxide nanoparticles into well-defined clusters: controlling the collective magnetic properties.

The combination of superstructure-forming amphiphilic block copolymers and superparamagnetic iron oxide nanoparticles produces new nano/microcomposites with unique size-dependent properties. Herein, we demonstrate the controlled clustering of superparamagnetic iron oxide nanoparticles (SPIOs) ranging from discretely encapsulated SPIOs to giant clusters, containing hundreds or even more particles, using an amphiphilic polyisoprene-block-poly(ethylene glycol) diblock copolymer. Within these clusters, the SPIOs interact with each other and show new collective properties, neither obtainable with singly encapsulated nor with the bulk material. We observed cluster-size-dependent magnetic properties, influencing the blocking temperature, the magnetoviscosity of the liquid suspension, and the r2 relaxivity for magnetic iron oxide nanoparticles. The clustering methodology can be expanded also to other nanoparticle materials [CdSe/CdS/ZnS core/shell/shell quantum dots (QDs), CdSe/CdS quantum dots/quantum rods (QDQRs), gold nanoparticles, and mixtures thereof].

A Systematic Study on Polymer-Modified Alkali-Activated Slag-Part II: From Hydration to Mechanical Properties.

The effect of styrene-acrylate (SA) polymer latex on alkali-activated slag (AAS) was systematically studied in the aspects of hydration, hydration products, pore structure and mechanical properties through the combined analytical techniques including calorimetry, X-ray diffraction, thermogravimetric analysis, mercury intrusion porosimetry, and mechanical measurement. It was found that the addition of SA does not retard the AAS hydration, but slightly accelerates it, possibly due to the increasing ion diffusion through the loosely structured hydration products. Pore structure analysis indicates that the addition of polymer increases the cumulative pore volume and the portion of pores with size >100 nm in the hardened AAS paste. The addition of SA latex results in a continuous decrease of the compressive strength, but the flexural strength firstly increases and then decreases with the increase of polymer dosage. The polymer dosage of 2.5 wt % is optimal when applying polymer latex in the AAS system in this study.

Small protein sequences can induce cellular uptake of complex nanohybrids.

In this letter, we report on the ability of functional fusion proteins presenting a lytic gamma peptide, to promote interactions with HeLa cells and delivery of large hybrid nanostructures.

Chemistry of Shape-Controlled Iron Oxide Nanocrystal Formation.

Herein, we demonstrate that meticulous and in-depth analysis of the reaction mechanisms of nanoparticle formation is rewarded by full control of the size, shape, and crystal structure of superparamagnetic iron oxide nanocrystals during synthesis. Starting from two iron sources, iron(II) and iron(III) carbonate, a strict separation of oleate formation from the generation of reactive pyrolysis products and concomitant nucleation of iron oxide nanoparticles was achieved. This protocol enabled us to analyze each step of nanoparticle formation independently in depth. The progress of the entire reaction was monitored via matrix-assisted laser desorption ionization time-of-flight mass spectrometry and gas chromatography, thus providing insight into the formation of various iron oleate species prior to nucleation. Interestingly, due to the intrinsic strongly reductive pyrolysis conditions of the oleate intermediates and redox process in early stages of the synthesis, pristine iron oxide nuclei were composed exclusively from wüstite irrespective of the oxidation state of the iron source. Controlling the reaction conditions provided a very broad range of size- and shape-defined monodispersed iron oxide nanoparticles. Curiously, after nucleation, star-shaped nanocrystals were obtained that underwent metamorphism toward cubic-shaped particles. Electron energy loss spectroscopy tomography revealed ex post oxidation of the primary wustite nanocrystal, providing a full 3D image of Fe2+ and Fe3+ distribution within. Overall, we developed a highly flexible synthesis, yielding multi-gram amounts of well-defined iron oxide nanocrystals of different sizes and morphologies.

Investigations of ion transport through nanoscale polymer membranes by fluorescence quenching of CdSe/CdS quantum dot/quantum rods.

Detailed steady-state and time-resolved fluorescence quenching measurements give deep insight into ion transport through nanometer thick diblock copolymer membranes, which were assembled as biocompatible shell material around CdSe/CdS quantum dot in quantum rods. We discuss the role of polymer chain length, intermolecular cross-linking and nanopore formation by analysing electron transfer processes from the photoexcited QDQRs to Cu(II) ions, which accumulate in the polymer membrane. Fluorescence investigations on single particle level additionally allow identifying ensemble inhomogeneities.

Tailoring the ligand shell for the control of cellular uptake and optical properties of nanocrystals.

In this short review, the main challenges in the use of hydrophobic nanoparticles in biomedical application are addressed. It is shown how to overcome the different issues by the use of a polymeric encapsulation system, based on an amphiphilic polyisoprene-block-poly(ethylene glycol) diblock copolymer. On the basis of this simple molecule, the development of a versatile and powerful phase transfer strategy is summarized, focusing on the main advantages like the adjustable size, the retained properties, the excellent shielding and the diverse functionalization properties of the encapsulated nanoparticles. Finally, the extraordinary properties of these encapsulated nanoparticles in terms of toxicity and specificity in a broad in vitro test is demonstrated.

CdSe/CdS-quantum rods: fluorescent probes for in vivo two-photon laser scanning microscopy.

CdSe/CdS-Quantum-dots-quantum-rods (QDQRs) with an aspect ratio of ∼ 6 are prepared via the seeded growth method, encapsulated within a shell of crosslinked poly(isoprene)-block-poly(ethylene glycol) (PI-b-PEG) diblock copolymer, and transferred from the organic phase into aqueous media. Their photoluminescence quantum yield (PLQY) of 78% is not compromised by the phase transfer. Within a period of two months the PLQY of QDQRs in aqueous solution at neutral pH decreases only slightly (to ∼ 65%). The two-photon (TP) action cross sections of QDQRs (∼ 10(5) GM) are two orders of magnitude higher than those of CdSe/CdS/ZnS-core/shell/shell quantum dots (QDs, ∼ 10(3) GM) with comparable diameter (∼ 5 nm). After applying PI-b-PEG encapsulated QDQRs onto the small intestinal mucosa of mice in vivo, their strong red fluorescence can easily be observed by two-photon laser scanning microscopy (TPLSM) and clearly distinguished from autofluorescent background. Our results demonstrate that PI-b-PEG encapsulated CdSe/CdS-QDQRs are excellent probes for studying the uptake and fate of nanoparticles by two-photon imaging techniques in vivo.

Controlling the physical and biological properties of highly fluorescent aqueous quantum dots using block copolymers of different size and shape.

The phase transfer of fluorescent CdSe based quantum dots (QDs) while retaining their properties and offering some advantages concerning the stability and functionalization characteristics is an important and intensively investigated field of research. Here we report how to tune and control the properties of CdSe/CdS/ZnS core-shell-shell QDs in water, using poly(isoprene-block-ethylene oxide) (PI-b-PEO) as a versatile system of amphiphilic diblock copolymers for the micellular encapsulation of nanoparticles (NPs). We show the synthesis of a novel PI-b-(PEO)2 miktoarm star polymer and how this different architecture besides the variation of the polymers' molecular weight gives us the opportunity to control the size of the built constructs in water between 24 and 53 nm. Because of this size control, an upper limit of the construct's diameter for the cellular uptake could be determined by a systemic study with human alveolar epithelial cells (A549) and murine macrophage leukemia cell (RAW-264.7). Furthermore, fluorescence quenching experiments with copper(II) and iron(III) ions show a strong influence of the used polymer on the shielding against these ions. This enables us to control the permeability of the polymer shell from very porous shells, which allow an almost complete cation exchange up to very dense shells. These even offer the possibility to perform copper(I) catalyzed click reactions while keeping the fluorescence of the QDs. All these results underline the huge variability and controllability of the PI-b-PEO diblock copolymer system for the encapsulation and functionalization of nanoparticles for biological applications. As a general trend, it can be stated that those coatings, which were most stable against quenchers, also showed the best resistivity with respect to unspecific cellular uptake.

A general route towards well-defined magneto- or fluorescent-plasmonic nanohybrids.

Herein, we present a general route towards defined nanohybrids, comprised of a fluorescent quantum dot (QD) or superparamagnetic iron oxide (Fe2O3) nanocrystal core and a tuneable corona of plasmonic gold or silver nanoparticles (NPs), adhered by a cross-linked poly(isoprene)-b-poly(ethylene glycol) diblock copolymer (PI-b-PEG) matrix. To this end, the PEG-terminus of the amphiphilic polymer was acylated with lipoic acid (LA), which, as is known, forms quasi-covalent Au-thiol- or Ag-thiol-bonds. Surprisingly, by variation of the ratio of the different NPs, inverse core/satellite structures bearing QDs or Fe2O3 around a metallic NP core were obtained. Furthermore, gold NPs or even closed gold shells were grown by in situ reductive deposition of Au(3+) ions on Fe2O3 NP seeds. Finally, in order to demonstrate the scope of the method, ternary nanohybrids, composed of QDs, Fe2O3 and Au NPs, were accomplished. All magneto-plasmonic and fluorescent-plasmonic materials were thoroughly characterized by absorption and emission spectroscopy, TEM and TEM-EDX. Antibody conjugation to these novel nanohybrids proved their practical utility in a prototype immunoassay.