Polymerisation of twist-bend nematic textures for electro-optical applications.

Polymer-stabilised liquid crystals (PSLCs) have recently been used to maintain the focal conic domains (FCDs) typical of the smectic A phase in the nematic phase for smart window applications. The newly discovered twist-bend nematic phase of bent-shaped dimers also exhibits FCDs due to its pseudo-layered structure. The variety of topological defects in the NTB phase is arguably even greater than in the smectic A phase, but the NTB phase is often metastable and usually crystallises at room temperature, which hinders its use in electro-optical applications. Here we show how different textures (FCDs, rope-like texture, double helices) of the NTB phase can be polymerised and then maintained in the nematic phase, at room temperature. This allows us to combine in PSLCs the optical properties of these defects, the thermal stability of the nematic phase and its reversible response to an electric field. We also show that the polymerised FCDs of the NTB phase could be used in smart glass applications and that the polymerised rope-like texture could be of interest for optical modulators and beam steering. In addition, the polymerisation of double helices could help to better understand their formation and structure in the NTB phase. More fundamentally, our work shows that despite the lack of density modulation, the textures of the NTB phase, thanks to its periodic character, can be exploited in the same way as those of the smectic A phase.

Engineered Hemostatic Biomaterials for Sealing Wounds.

Hemostatic biomaterials show great promise in wound control for the treatment of uncontrolled bleeding associated with damaged tissues, traumatic wounds, and surgical incisions. A surge of interest has been directed at boosting hemostatic properties of bioactive materials via mechanisms triggering the coagulation cascade. A wide variety of biocompatible and biodegradable materials has been applied to the design of hemostatic platforms for rapid blood coagulation. Recent trends in the design of hemostatic agents emphasize chemical conjugation of charged moieties to biomacromolecules, physical incorporation of blood-coagulating agents in biomaterials systems, and superabsorbing materials in either dry (foams) or wet (hydrogel) states. In addition, tough bioadhesives are emerging for efficient and physical sealing of incisions. In this Review, we highlight the biomacromolecular design approaches adopted to develop hemostatic bioactive materials. We discuss the mechanistic pathways of hemostasis along with the current standard experimental procedures for characterization of the hemostasis efficacy. Finally, we discuss the potential for clinical translation of hemostatic technologies, future trends, and research opportunities for the development of next-generation surgical materials with hemostatic properties for wound management.

DNA-tethered Polymersome Clusters as Nanotheranostic Platform.

Nanotheranostics combine the use of nanomaterials and biologically active compounds to achieve diagnosis and treatment at the same time. To date, severe limitations compromise the use of nanotheranostic systems as potent nanomaterials are often incompatible with potent biomolecules. Herein we emphasize how a novel type of polymersome clusters loaded with active molecules can be optimized to obtain an efficient nanotheranostic platform. Polymersomes loaded with enzymes and specific dyes, respectively and exposing complementary DNA strands at their external surface formed clusters by means of DNA hybridization. We describe factors at the molecular level and other conditions that need to be optimized at each step of the cluster formation to favor theranostic efficiency.

Segregated Nanocompartments Containing Therapeutic Enzymes and Imaging Compounds within DNA-Zipped Polymersome Clusters for Advanced Nanotheranostic Platform.

Nanotheranostics is an emerging field that brings together nanoscale-engineered materials with biological systems providing a combination of therapeutic and diagnostic strategies. However, current theranostic nanoplatforms have serious limitations, mainly due to a mismatch between the physical properties of the selected nanomaterials and their functionalization ease, loading ability, or overall compatibility with bioactive molecules. Herein, a nanotheranostic system is proposed based on nanocompartment clusters composed of two different polymersomes linked together by DNA. Careful design and procedure optimization result in clusters segregating the therapeutic enzyme human Dopa decarboxylase (DDC) and fluorescent probes for the detection unit in distinct but colocalized nanocompartments. The diagnostic compartment provides a twofold function: trackability via dye loading as the imaging component and the ability to attach the cluster construct to the surface of cells. The therapeutic compartment, loaded with active DDC, triggers the cellular expression of a secreted reporter enzyme via production of dopamine and activation of dopaminergic receptors implicated in atherosclerosis. This two-compartment nanotheranostic platform is expected to provide the basis of a new treatment strategy for atherosclerosis, to expand versatility and diversify the types of utilizable active molecules, and thus by extension expand the breadth of attainable applications.

Biomolecule-polymer hybrid compartments: combining the best of both worlds.

Compartmentalization is a fundamental principle in biology that is needed for the temporal and spatial separation of chemically incompatible reactions and biomolecules. Nano- or micro-sized compartments made of synthetic polymers are used to mimick this principle. The self-assembly of these polymers into vesicular objects is highly compatible with the integration of biomolecules, either into the lumen, the membrane or onto the surface of the vesicles. Thus, a great variety of biohybrid nano- and microscaled compartments has been developed exploiting the specific function and properties of targeting peptides, antibodies, enzymes, nucleic acids or lipids. Such biohybrid compartments have moved from simple systems encapsulating e.g. a model protein into complex multicompartmentalized structures that are able to combine the activity of different biomolecular cargos getting closer to the realization of artifical organelles or cells. Encapsulation of medically relevant cargos combined with careful design of the polymeric scaffold and specific surface functionalization have led to a significant progress in therapeutical applications such as targeted drug delivery or enzyme replacement therapy.

Nanosensors based on polymer vesicles and planar membranes: a short review.

This review aims to summarize the advance in the field of nanosensors based on two particular materials: polymer vesicles (polymersomes) and polymer planar membranes. These two types of polymer-based structural arrangements have been shown to be efficient in the production of sensors as their features allow to adapt to different environment but also to increase the sensitivity and the selectivity of the sensing device. Polymersomes and planar polymer membranes offer a platform of choice for a wide range of chemical functionalization and characteristic structural organization which allows a convenient usage in numerous sensing applications. These materials appear as great candidates for such nanosensors considering the broad variety of polymers. They also enable the confection of robust nanosized architectures providing interesting properties for numerous applications in many domains ranging from pollution to drug monitoring. This report gives an overview of these different sensing strategies whether the nanosensors aim to detect chemicals, biological or physical signals.

Acquisition of activation receptor ligand by trogocytosis renders NK cells hyporesponsive.

Because NK cells secrete cytotoxic granules and cytokines that can destroy surrounding cells and help shape the subsequent immune response, they must be kept under tight control. Several mechanisms, at different levels, are in place to control NK cell function. In this study, we describe a novel mechanism regulating NK cell function in which NK cells acquire ligands for activating receptors from target cells by trogocytosis, rendering the NK cells hyporesponsive. In this model, murine NK cells acquire m157, the murine CMV-encoded ligand for the Ly49H-activating receptor, from target cells both in vitro and in vivo. Although acquisition of m157 requires cell-to-cell contact, it does not require the expression of the Ly49H receptor by the NK cell. Acquired m157 protein is expressed on the NK cell surface with a glycosylphosphatidylinisotol linkage and interacts with the Ly49H receptor expressed on the NK cell. This interaction results in blocking the Ly49H receptor that prevents the NK cells from recognizing m157-expressing targets and continuous engagement of the Ly49H-activating receptor, which results in the hyporesponsiveness of the Ly49H(+) NK cell to stimulation through other activating receptors. Thus, NK cell acquisition of a ligand for an activation receptor by trogocytosis renders them hyporesponsive. This mechanism, by which mature NK cell function can be altered, has important implications in regard to how NK cells respond to tumors in specific microenvironments as well as the use of expanded NK cells in treating various malignancies.

Coeliac disease screening is suboptimal in a tertiary gastroenterology setting.

BACKGROUND AND AIMS: Coeliac disease (CD) is widely prevalent in North America, but case-finding techniques currently used may not be adequate for patient identification. We aimed to determine the adequacy of CD screening in an academic gastroenterology (GI) practice. METHODS: Consecutive initial visits to a tertiary academic GI practice were surveyed over a 3-month period as a fellow-initiated quality improvement project. All electronic records were reviewed to look for indications for CD screening according to published guidelines. The timing of screening was noted (before or after referral), as well as the screening method (serology or biopsy). Data were analysed to compare CD screening practices across subspecialty clinics. RESULTS: 616 consecutive patients (49±0.6 years, range 16-87 years, 58.5% females, 94% Caucasian) fulfilled inclusion criteria. CD testing was indicated in 336 (54.5%), but performed in only 145 (43.2%). The need for CD screening was highest in luminal GI and inflammatory bowel disease clinics, followed by biliary and hepatology clinics (p<0.0001); CD screening rate was highest in the luminal GI clinic (p=0.002). Of 145 patients screened, 4 patients (2.4%) had serology consistent with CD, of which 2 were proven by duodenal biopsy. Using this proportion, an additional 5 patients might have been diagnosed in 191 untested patients with indications for CD screening. CONCLUSIONS: More than 50% of patients in a tertiary GI clinic have indications for CD screening, but <50% of indicated cases are screened. Case-finding techniques therefore are suboptimal, constituting a gap in patient care and an important target for future quality improvement initiatives.

Potential preadaptation to anthropogenic pollution: evidence from a common quantitative trait locus for zinc and cadmium tolerance in metallicolous and nonmetallicolous accessions of Arabidopsis halleri.

As a drastic environmental change, metal pollution may promote the rapid evolution of genetic adaptations contributing to metal tolerance. In Arabidopsis halleri, genetic bases of zinc (Zn) and cadmium (Cd) tolerance have been uncovered only in a metallicolous accession, although tolerance is species-wide. The genetic determinants of Zn and Cd tolerance in a nonmetallicolous accession were thus investigated for the first time. The genetic architecture of tolerance was investigated in a nonmetallicolous population (SK2) by using first backcross progeny obtained from crosses between SK2 and Arabidopsis lyrata petraea, a nonmetallophyte species. Only one significant and common quantitative trait locus (QTL) region was identified explaining 22.6% and 31.2% of the phenotypic variation for Zn and Cd tolerance, respectively. This QTL co-localized with HEAVY METAL ATPASE 4 (AhHMA4), which was previously validated as a determinant of Zn and Cd tolerance in a metallicolous accession. Triplication and high expression of HMA4 were confirmed in SK2. In contrast, gene duplication and high expression of METAL TOLERANT PROTEIN 1A (MTP1A), which was previously associated with Zn tolerance in a metallicolous accession, were not observed in SK2. Overall, the results support the role of HMA4 in tolerance capacities of A. halleri that may have pre-existed in nonmetallicolous populations before colonization of metal-polluted habitats. Preadaptation to metal-contaminated sites is thus discussed.

CATION EXCHANGER1 Cosegregates with Cadmium Tolerance in the Metal Hyperaccumulator Arabidopsis halleri and Plays a Role in Limiting Oxidative Stress in Arabidopsis Spp.

Arabidopsis halleri is a model species for the study of plant adaptation to extreme metallic conditions. In this species, cadmium (Cd) tolerance seems to be constitutive, and the mechanisms underlying the trait are still poorly understood. A previous quantitative trait loci (QTL) analysis performed on A. halleri × Arabidopsis lyrata backcross population1 identified the metal-pump gene Heavy Metal ATPase4 as the major genetic determinant for Cd tolerance. However, although necessary, Heavy Metal ATPase4 alone is not sufficient for determining this trait. After fine mapping, a gene encoding a calcium(2+)/hydrogen(+) antiporter, cation/hydrogen(+) exchanger1 (CAX1), was identified as a candidate gene for the second QTL of Cd tolerance in A. halleri. Backcross population1 individuals displaying the A. halleri allele for the CAX1 locus exhibited significantly higher CAX1 expression levels compared with the ones with the A. lyrata allele, and a positive correlation between CAX1 expression and Cd tolerance was observed. Here, we show that this QTL is conditional and that it is only detectable at low external Ca concentration. CAX1 expression in both roots and shoots was higher in A. halleri than in the close Cd-sensitive relative species A. lyrata and Arabidopsis thaliana. Moreover, CAX1 loss of function in A. thaliana led to higher Cd sensitivity at low concentration of Ca, higher sensitivity to methylviologen, and stronger accumulation of reactive oxygen species after Cd treatment. Overall, this study identifies a unique genetic determinant of Cd tolerance in the metal hyperaccumulator A. halleri and offers a new twist for the function of CAX1 in plants.

Evidence of various mechanisms of Cd sequestration in the hyperaccumulator Arabidopsis halleri, the non-accumulator Arabidopsis lyrata, and their progenies by combined synchrotron-based techniques.

Arabidopsis halleri is a model plant for Zn and Cd hyperaccumulation. The objective of this study was to determine the relationship between the chemical forms of Cd, its distribution in leaves, and Cd accumulation and tolerance. An interspecific cross was carried out between A. halleri and the non-tolerant and non-hyperaccumulating relative A. lyrata providing progenies segregating for Cd tolerance and accumulation. Cd speciation and distribution were investigated using X-ray absorption spectroscopy and microfocused X-ray fluorescence. In A. lyrata and non-tolerant progenies, Cd was coordinated by S atoms only or with a small contribution of O groups. Interestingly, the proportion of O ligands increased in A. halleri and tolerant progenies, and they were predominant in most of them, while S ligands were still present. Therefore, the binding of Cd with O ligands was associated with Cd tolerance. In A. halleri, Cd was mainly located in the xylem, phloem, and mesophyll tissue, suggesting a reallocation process for Cd within the plant. The distribution of the metal at the cell level was further discussed. In A. lyrata, the vascular bundles were also Cd enriched, but the epidermis was richer in Cd as compared with the mesophyll. Cd was identified in trichomes of both species. This work demonstrated that both Cd speciation and localization were related to the tolerance character of the plant.

Intraspecific variability of cadmium tolerance and accumulation, and cadmium-induced cell wall modifications in the metal hyperaccumulator Arabidopsis halleri.

Certain molecular mechanisms of Cd tolerance and accumulation have been identified in the model species Arabidopsis halleri, while intraspecific variability of these traits and the mechanisms of shoot detoxification were little addressed. The Cd tolerance and accumulation of metallicolous and non-metallicolous A. halleri populations from different genetic units were tested in controlled conditions. In addition, changes in shoot cell wall composition were investigated using Fourier transform infrared spectroscopy. Indeed, recent works on A. halleri suggest Cd sequestration both inside cells and in the cell wall/apoplast. All A. halleri populations tested were hypertolerant to Cd, and the metallicolous populations were on average the most tolerant. Accumulation was highly variable between and within populations, and populations that were non-accumulators of Cd were identified. The effect of Cd on the cell wall composition was quite similar in the sensitive species A. lyrata and in A. halleri individuals; the pectin/polysaccharide content of cell walls seems to increase after Cd treatment. Nevertheless, the changes induced by Cd were more pronounced in the less tolerant individuals, leading to a correlation between the level of tolerance and the extent of modifications. This work demonstrated that Cd tolerance and accumulation are highly variable traits in A. halleri, suggesting adaptation at the local scale and involvement of various molecular mechanisms. While in non-metallicolous populations drastic modifications of the cell wall occur due to higher Cd toxicity and/or Cd immobilization in this compartment, the increased tolerance of metallicolous populations probably involves other mechanisms such as vacuolar sequestration.

Advances in the Separation and Detection of Secondary Organic Aerosol Produced by Decamethylcyclopentasiloxane (D5) in Laboratory-Generated and Ambient Aerosol.

Decamethylcyclopentasiloxane (D5), a common ingredient in many personal care products (PCPs), undergoes oxidation in the atmosphere, leading to the formation of secondary organic aerosol (SOA). Yet, the specific contributions of D5-derived SOA on ambient fine particulate matter (PM2.5) have not been characterized. This study addresses this knowledge gap by introducing a new analytical method to advance the molecular characterization of oxidized D5 and its detection in ambient aerosol. The newly developed reversed phase liquid chromatography method, in conjunction with high-resolution mass spectrometry, separates and detects D5 oxidation products, enabling new insights into their molecular and isomeric composition. Application of this method to laboratory-generated SOA and urban PM2.5 in New York City expands the number of D5 oxidation products observed in ambient aerosol and informs a list of molecular candidates to track D5-derived SOA in the atmosphere. An oxidation series was observed in which one or more methyl groups in D5 (C10H30O5Si5) is replaced by a hydroxyl group, which indicates the presence of multistep oxidation products in ambient PM2.5. Because of their specificity to PCPs and demonstrated detectability in ambient PM2.5, several oxidation products are proposed as molecular tracers for D5-derived SOA and may prove useful in assessing the impact of PCPs-derived SOA in the atmosphere.

Tolerance to cadmium in plants: the special case of hyperaccumulators.

On sols highly polluted by trace metallic elements the majority of plant species are excluders, limiting the entry and the root to shoot translocation of trace metals. However a rare class of plants called hyperaccumulators possess remarkable adaptation because those plants combine extremely high tolerance degrees and foliar accumulation of trace elements. Hyperaccumulators have recently gained considerable interest, because of their potential use in phytoremediation, phytomining and biofortification. On a more fundamental point of view hyperaccumulators of trace metals are case studies to understand metal homeostasis and detoxification mechanisms. Hyperaccumulation of trace metals usually depends on the enhancement of at least four processes, which are the absorption from the soil, the loading in the xylem in the roots and the unloading from the xylem in the leaves and the detoxification in the shoot. Cadmium is one of the most toxic trace metallic elements for living organisms and its accumulation in the environment is recognized as a worldwide concern. To date, only nine species have been recognized as Cd hyperaccumulators that is to say able to tolerate and accumulate more than 0.01 % Cd in shoot dry biomass. Among these species, four belong to the Brassicaceae family with Arabidopsis halleri and Noccaea caerulescens being considered as models. An update of our knowledge on the evolution of hyperaccumulators will be presented here.

Variation in HMA4 gene copy number and expression among Noccaea caerulescens populations presenting different levels of Cd tolerance and accumulation.

There is huge variability among populations of the hyperaccumulator Noccaea caerulescens (formerly Thlaspi caerulescens) in their capacity to tolerate and accumulate cadmium. To gain new insights into the mechanisms underlying this variability, we estimated cadmium fluxes and further characterized the N. caerulescens heavy metal ATPase 4 (NcHMA4) gene in three populations (two calamine, Saint-Félix-de-Pallières, France and Prayon, Belgium; one serpentine, Puente Basadre, Spain) presenting contrasting levels of tolerance and accumulation. Cadmium uptake and translocation varied among populations in the same way as accumulation; the population with the highest cadmium concentration in shoots (Saint Félix-de-Pallières) presented the highest capacity for uptake and translocation. We demonstrated that the four NcHMA4 copies identified in a previous study are not fixed at the species level, and that the copy truncated in the C-terminal part encodes a functional protein. NcHMA4 expression and gene copy number was lower in the serpentine population, which was the least efficient in cadmium translocation compared to the calamine populations. NcHMA4 expression was associated with the vascular tissue in all organs, with a maximum at the crown. Overall, our results indicate that differences in cadmium translocation ability of the studied populations appear to be controlled, at least partially, by NcHMA4, while the overexpression of NcHMA4 in the two calamine populations may result from convergent evolution.

Isolation and characterization of Arabidopsis halleri and Thlaspi caerulescens phytochelatin synthases.

The synthesis of phytochelatins (PC) represents a major metal and metalloid detoxification mechanism in various species. PC most likely play a role in the distribution and accumulation of Cd and possibly other metals. However, to date, no studies have investigated the phytochelatin synthase (PCS) genes and their expression in the Cd-hyperaccumulating species. We used functional screens in two yeast species to identify genes expressed by two Cd hyperaccumulators (Arabidopsis halleri and Thlaspi caerulescens) and involved in cellular Cd tolerance. As a result of these screens, PCS genes were identified for both species. PCS1 was in each case the dominating cDNA isolated. The deduced sequences of AhPCS1 and TcPCS1 are very similar to AtPCS1 and their identity is particularly high in the proposed catalytic N-terminal domain. We also identified in A. halleri and T. caerulescens orthologues of AtPCS2 that encode functional PCS. As compared to A. halleri and A. thaliana, T. caerulescens showed the lowest PCS expression. Furthermore, concentrations of PC in Cd-treated roots were the highest in A. thaliana, intermediate in A. halleri and the lowest in T. caerulescens. This mirrors the known capacity of these species to translocate Cd to the shoot, with T. caerulescens being the best translocator. Very low or undetectable concentrations of PC were measured in A. halleri and T. caerulescens shoots, contrary to A. thaliana. These results suggest that extremely efficient alternative Cd sequestration pathways in leaves of Cd hyperaccumulators prevent activation of PC synthase by Cd²âº ions.

Catalytic polymersomes to produce strong and long-lasting bioluminescence.

Here, we introduce an artificial bioluminescent nanocompartment based on the encapsulation of light-producing enzymes, luciferases, inside polymersomes. We exploit nanocompartmentalization to enhance luciferase stability in a cellular environment but also to positively modulate enzyme kinetics to achieve a long-lasting glow type signal. These features pave the way for expanding bioluminescence to nanotechnology-based applications.

Artificial Melanogenesis by Confining Melanin/Polydopamine Production inside Polymersomes.

Melanin and polydopamine are potent biopolymers for the development of biomedical nanosystems. However, applications of melanin or polydopamine-based nanoparticles are limited by drawbacks related to a compromised colloidal stability over long time periods and associated cytotoxicity. To overcome these hurdles, a novel strategy is proposed that mimics the confinement of natural melanin in melanosomes. Melanosome mimics are developed by co-encapsulating the melanin/polydopamine precursors L-DOPA/dopamine with melanogenic enzyme Tyrosinase within polymersomes. The conditions of polymersome formation are optimized to obtain melanin/polydopamine polymerization within the cavity of the polymersomes. Similar to native melanosomes, polymersomes containing melanin/polydopamine show long-term colloidal stability, cell-compatibility, and potential for cell photoprotection. This novel kind of artificial melanogenesis is expected to inspire new applications of the confined melanin/polydopamine biopolymers.

Optical Microscopy Observations and Construction of Dupin Cyclides at the Isotropic/Smectic A Phase Transition.

In this work, we are interested in the nucleation of bâtonnets at the Isotropic/Smectic A phase transition of 10CB liquid crystal. Very often, these bâtonnets are decorated with a large number of focal conics. We present here an example of a bâtonnet obtained by optical crossed polarized microscopy in a frequently observed particular area of the sample. This bâtonnet presents bulges and one of them consists of a tessellation of ellipses. These ellipses are two by two tangent, one to each other, and their confocal hyperbolas merge at the apex of the bâtonnet. We propose a numerical simulation with Python software to reproduce this tiling of ellipses as well as the shape of the smectic layers taking the well-known shape of Dupin cyclides within this particular bâtonnet area.