Highly Selective Electrochemical Baeyer-Villiger Oxidation through Oxygen Atom Transfer from Water.

The Baeyer-Villiger oxidation of ketones is a crucial oxygen atom transfer (OAT) process used for ester production. Traditionally, Baeyer-Villiger oxidation is accomplished by thermally oxidizing the OAT from stoichiometric peroxides, which are often difficult to handle. Electrochemical methods hold promise for breaking the limitation of using water as the oxygen atom source. Nevertheless, existing demonstrations of electrochemical Baeyer-Villiger oxidation face the challenges of low selectivity. We report in this study a strategy to overcome this challenge. By employing a well-known water oxidation catalyst, Fe2O3, we achieved nearly perfect selectivity for the electrochemical Baeyer-Villiger oxidation of cyclohexanone. Mechanistic studies suggest that it is essential to produce surface hydroperoxo intermediates (M-OOH, where M represents a metal center) that promote the nucleophilic attack on ketone substrates. By confining the reactions to the catalyst surfaces, competing reactions (e.g., dehydrogenation, carboxylic acid cation rearrangements, and hydroxylation) are greatly limited, thereby offering high selectivity. The surface-initiated nature of the reaction is confirmed by kinetic studies and spectroelectrochemical characterizations. This discovery adds nucleophilic oxidation to the toolbox of electrochemical organic synthesis.

Regulating Access to Active Sites via Hydrogen Bonding and Cation-Dipole Interactions: A Dual Cofactor Approach to Switchable Catalysis.

Hydrogen bonding networks are ubiquitous in biological systems and play a key role in controlling the conformational dynamics and allosteric interactions of enzymes. Yet in small organometallic catalysts, hydrogen bonding rarely controls ligand binding to the metal center. In this work, a hydrogen bonding network within a well-defined organometallic catalyst works in concert with cation-dipole interactions to gate substrate access to the active site. An ammine ligand acts as one cofactor, templating a hydrogen bonding network within a pendent crown ether and preventing the binding of strong donor ligands, such as nitriles, to the nickel center. Sodium ions are the second cofactor, disrupting hydrogen bonding to enable switchable ligand substitution reactions. Thermodynamic analyses provide insight into the energetic requirements of the different supramolecular interactions that enable substrate gating. The dual cofactor approach enables switchable catalytic hydroamination of crotononitrile. Systematic comparisons of catalysts with varying structural features provide support for the critical role of the dual cofactors in achieving on/off catalysis with substrates containing strongly donating functional groups that might otherwise interfere with switchable catalysts.

Tunable and Switchable Catalysis Enabled by Cation-Controlled Gating with Crown Ether Ligands.

ConspectusCatalysis has become an essential tool in science and technology, impacting the discovery of pharmaceuticals, the manufacture of commodity chemicals and plastics, the production of fuels, and much more. In most cases, a particular catalyst is optimized to mediate a particular reaction, continually producing a desired product at a given rate. There is enormous opportunity in developing catalysts that are dynamic, capable of responding to a change in the environment to alter structure and function. Controlled catalysis, in which the activity or selectivity of a catalytic reaction can be adjusted through an external stimulus, offers opportunities for innovation in catalysis. Catalyst discovery could be simplified if a single thoughtfully designed complex could work synergistically with additives to optimize performance rather than trying a multitude of different metal/ligand combinations. Temporal control could be gained to facilitate the execution of multiple reactions in the same flask, for example, by activating one catalyst and deactivating another to avoid incompatibilities. Selectivity switching could enable copolymer synthesis with well-defined chemical and material properties. These applications might sound futuristic for synthetic catalysts, but in nature, such a degree of controlled catalysis is commonplace. For example, allosteric interactions and/or feedback loops modulate enzymatic activity to enable complex small-molecule synthesis and sequence-defined polymerization reactions in complex mixtures containing many catalytic sites. In many cases, regulation is achieved by "gating" substrate access to the active site. Fundamental advances in catalyst design are needed to better understand the factors that enable controlled catalysis in the arena of synthetic chemistry, particularly in achieving substrate gating outside of macromolecular environments. In this Account, the development of design principles for achieving cation-controlled catalysis is described. The guiding hypothesis was that gating substrate access to a catalyst site could be achieved by controlling the dynamics of a hemilabile ligand through secondary Lewis acid/base and/or cation-dipole interactions. To enforce such interactions, catalysts sitting at the interface of organometallic catalysis and supramolecular chemistry were designed. A macrocyclic crown ether was incorporated into a robust organometallic pincer ligand, and these "pincer-crown ether" ligands have been explored in catalysis. Complementary studies of controlled catalysis and detailed mechanistic analysis guided the development of iridium, nickel, and palladium pincer-crown ether catalysts capable of substrate gating. Toggling the gate between open and closed states leads to switchable catalysis, where cation addition/removal changes the turnover frequency or the product selectivity. Varying the degree of gating leads to tunable catalysis, where the activity can be tuned based on the identity and amount of salt added. Research has focused on reactions of alkenes, particularly isomerization reactions, which has in turn led to design principles for cation-controlled catalysts.

Kinetic Isotope Effects and the Mechanism of CO2 Insertion into the Metal-Hydride Bond of fac-(bpy)Re(CO)3H.

The 1,2-insertion reaction of CO2 into metal-hydride bonds of d6-octahedral complexes to give κ1-O-metal-formate products is the key step in various CO2 reduction schemes and as a result has attracted extensive mechanistic investigations. For many octahedral catalysts, CO2 insertion follows an associative mechanism in which CO2 interacts directly with the coordinated hydride ligand instead of the more classical dissociative mechanism that opens an empty coordination site to bind the substrate to the metal prior to a hydride migration step. To better understand the associative mechanism, we conducted a systematic quantum chemical investigation on the reaction between CO2 and fac-(bpy)Re(CO)3H (1-Re-H; bpy = 2,2'-bipyridine) starting with the gas phase and then moving to THF and other solvents with increased dielectric constants. Detailed analyses of the potential energy surfaces (PESs) and intrinsic reaction coordinates (IRCs) reveal that the reaction is enabled in all media by an initial stage of making a 3c-2e bond between the carbon of CO2 and the metal-hydride bond that is most consistent with an organometallic bridging hydride Re-H-CO2 species. Once CO2 is bent and anchored to the metal-hydride bond, the reaction proceeds by a rotation motion via a cyclic transition state TS2 that interchanges Re-H-CO2 and Re-O-CHO coordination. The combined stages provide an asynchronous-concerted pathway for CO2 insertion on the Gibbs free energy surface with TS2 as the highest energy point. Consideration of TS2 as a rate-determining TS gives activation barriers, inverse KIEs, substituent effects, and solvent effects that agree with the experimental data available in this system. An important new insight revealed by the analyses of the results is that the initial stage of the reaction is not a hydride transfer step as has been assumed in some studies. In fact, the loose vibration of the TS that can be identified for the first stage of the reaction in solution (TS1) does not involve the Re-H stretching vibrational mode. Accordingly, the imaginary frequency of TS1 is insensitive to deuteration, and therefore, TS1 leads to no significant KIE.

Lewis Structures and the Bonding Classification of End-on Bridging Dinitrogen Transition Metal Complexes.

The activation of dinitrogen by coordination to transition metal ions is a widely used and promising approach to the utilization of Earth's most abundant nitrogen source for chemical synthesis. End-on bridging N2 complexes (µ-η1:η1-N2) are key species in nitrogen fixation chemistry, but a lack of consensus on the seemingly simple task of assigning a Lewis structure for such complexes has prevented application of valence electron counting and other tools for understanding and predicting reactivity trends. The Lewis structures of bridging N2 complexes have traditionally been determined by comparing the experimentally observed NN distance to the bond lengths of free N2, diazene, and hydrazine. We introduce an alternative approach here and argue that the Lewis structure should be assigned based on the total π-bond order in the MNNM core (number of π-bonds), which derives from the character (bonding or antibonding) and occupancy of the delocalized π-symmetry molecular orbitals (π-MOs) in MNNM. To illustrate this approach, the complexes cis,cis-[(iPr4PONOP)MCl2]2(µ-N2) (M = W, Re, and Os) are examined in detail. Each complex is shown to have a different number of nitrogen-nitrogen and metal-nitrogen π-bonds, indicated as, respectively: W≡N-N≡W, Re═N═N═Re, and Os-N≡N-Os. It follows that each of these Lewis structures represents a distinct class of complexes (diazanyl, diazenyl, and dinitrogen, respectively), in which the µ-N2 ligand has a different electron donor number (total of 8e-, 6e-, or 4e-, respectively). We show how this classification can greatly aid in understanding and predicting the properties and reactivity patterns of µ-N2 complexes.

Catalytic reduction of dinitrogen to ammonia using molybdenum porphyrin complexes.

Porphyrin complexes are well-known in O2 and CO2 reduction, but their application to N2 reduction is less developed. Here, we show that oxo and nitrido complexes of molybdenum supported by tetramesitylporphyrin (TMP) are effective precatalysts for catalytic N2 reduction to ammonia, verified by 15N2 labeling studies and other control experiments. Spectroscopic and electrochemical studies illuminate some relevant thermodynamic parameters, including the N-H bond dissociation free energy of (TMP)MoNH (43 ± 2 kcal mol-1). We place these results in the context of other work on homogeneous N2 reduction catalysis.

Oxidative Addition of a Phosphinite P-O Bond at Nickel.

Oxidative addition is an essential elementary reaction in organometallic chemistry and catalysis. While a diverse array of oxidative addition reactions has been reported to date, examples of P-O bond activation are surprisingly rare. Herein, we report the ligand-templated oxidative addition of a phosphinite P-O bond in the diphosphinito aniline compound HN(2-OPiPr2-3,5-tBu-C6H2)2 [H(P2ONO)] at Ni0 to form (PONO)Ni(HPiPr2) after proton rearrangement. Notably, the P-O cleavage occurs selectively over an amine N-H bond activation. Additionally, the ligand cannibalization is reversible, as addition of XPR2 (X = Cl, Br; R = iPr, Cy) to (PONO)Ni(HPiPr2) readily produces either symmetric or unsymmetric (P2ONO)NiX species and free HPiPr2. Finally, the mechanisms of both the initial P-O bond cleavage and its subsequent reconstruction are investigated to provide further insight into how to target P-O bond activation.

Correlating Thermodynamic and Kinetic Hydricities of Rhenium Hydrides.

The kinetics of hydride transfer from Re(Rbpy)(CO)3H (bpy = 4,4'-R-2,2'-bipyridine; R = OMe, tBu, Me, H, Br, COOMe, CF3) to CO2 and seven different cationic N-heterocycles were determined. Additionally, the thermodynamic hydricities of complexes of the type Re(Rbpy)(CO)3H were established primarily using computational methods. Linear free-energy relationships (LFERs) derived by correlating thermodynamic and kinetic hydricities indicate that, in general, the rate of hydride transfer increases as the thermodynamic driving force for the reaction increases. Kinetic isotope effects range from inverse for hydride transfer reactions with a small driving force to normal for reactions with a large driving force. Hammett analysis indicates that hydride transfer reactions with greater thermodynamic driving force are less sensitive to changes in the electronic properties of the metal hydride, presumably because there is less buildup of charge in the increasingly early transition state. Bronsted α values were obtained for a range of hydride transfer reactions and along with DFT calculations suggest the reactions are concerted, which enables the use of Marcus theory to analyze hydride transfer reactions involving transition metal hydrides. It is notable, however, that even slight perturbations in the steric properties of the Re hydride or the hydride acceptor result in large deviations in the predicted rate of hydride transfer based on thermodynamic driving forces. This indicates that thermodynamic considerations alone cannot be used to predict the rate of hydride transfer, which has implications for catalyst design.

Mechanisms of Electrochemical N2 Splitting by a Molybdenum Pincer Complex.

Molybdenum complexes supported by tridentate pincer ligands are exceptional catalysts for dinitrogen fixation using chemical reductants, but little is known about their prospects for electrochemical reduction of dinitrogen. The viability of electrochemical N2 binding and splitting by a molybdenum(III) pincer complex, (pyPNP)MoBr3 (pyPNP = 2,6-bis(tBu2PCH2)-C5H3N)), is established in this work, providing a foundation for a detailed mechanistic study of electrode-driven formation of the nitride complex (pyPNP)Mo(N)Br. Electrochemical kinetic analysis, optical and vibrational spectroelectrochemical monitoring, and computational studies point to two concurrent reaction pathways: In the reaction-diffusion layer near the electrode surface, the molybdenum(III) precursor is reduced by 2e- and generates a bimetallic molybdenum(I) Mo2(µ-N2) species capable of N-N bond scission; and in the bulk solution away from the electrode surface, over-reduced molybdenum(0) species undergo chemical redox reactions via comproportionation to generate the same bimetallic molybdenum(I) species capable of N2 cleavage. The comproportionation reactions reveal the surprising intermediacy of dimolybdenum(0) complex trans,trans-[(pyPNP)Mo(N2)2](µ-N2) in N2 splitting pathways. The same "over-reduced" molybdenum(0) species was also found to cleave N2 upon addition of lutidinium, an acid frequently used in catalytic reduction of dinitrogen.

Stepwise Iodide-Free Methanol Carbonylation via Methyl Acetate Activation by Pincer Iridium Complexes.

Iodide is an essential promoter in the industrial production of acetic acid via methanol carbonylation, but it also contributes to reactor corrosion and catalyst deactivation. Here we report that iridium pincer complexes mediate the individual steps of methanol carbonylation to methyl acetate in the absence of methyl iodide or iodide salts. Iodide-free methylation is achieved under mild conditions by an aminophenylphosphinite pincer iridium(I) dinitrogen complex through net C-O oxidative addition of methyl acetate to produce an isolable methyliridium(III) acetate complex. Experimental and computational studies provide evidence for methylation via initial C-H bond activation followed by acetate migration, facilitated by amine hemilability. Subsequent CO insertion and reductive elimination in methanol solution produced methyl acetate and acetic acid. The net reaction is methanol carbonylation to acetic acid using methyl acetate as a promoter alongside conversion of an iridium dinitrogen complex to an iridium carbonyl complex. Kinetic studies of migratory insertion and reductive elimination reveal essential roles of the solvent methanol and distinct features of acetate and iodide anions that are relevant to the design of future catalysts for iodide-free carbonylation.

Temperature and Solvent Effects on H2 Splitting and Hydricity: Ramifications on CO2 Hydrogenation by a Rhenium Pincer Catalyst.

The catalytic hydrogenation of carbon dioxide holds immense promise for applications in sustainable fuel synthesis and hydrogen storage. Mechanistic studies that connect thermodynamic parameters with the kinetics of catalysis can provide new understanding and guide predictive design of improved catalysts. Reported here are thermochemical and kinetic analyses of a new pincer-ligated rhenium complex (tBuPOCOP)Re(CO)2 (tBuPOCOP = 2,6-bis(di-tert-butylphosphinito)phenyl) that catalyzes CO2 hydrogenation to formate with faster rates at lower temperatures. Because the catalyst follows the prototypical "outer sphere" hydrogenation mechanism, comprehensive studies of temperature and solvent effects on the H2 splitting and hydride transfer steps are expected to be relevant to many other catalysts. Strikingly large entropy associated with cleavage of H2 results in a strong temperature dependence on the concentration of [(tBuPOCOP)Re(CO)2H]- present during catalysis, which is further impacted by changing the solvent from toluene to tetrahydrofuran to acetonitrile. New methods for determining the hydricity of metal hydrides and formate at temperatures other than 298 K are developed, providing insight into how temperature can influence the favorability of hydride transfer during catalysis. These thermochemical insights guided the selection of conditions for CO2 hydrogenation to formate with high activity (up to 364 h-1 at 1 atm or 3330 h-1 at 20 atm of 1:1 H2:CO2). In cases where hydride transfer is the highest individual kinetic barrier, entropic contributions to outer sphere H2 splitting lead to a unique temperature dependence: catalytic activity increases as temperature decreases in tetrahydrofuran (200-fold increase upon cooling from 50 to 0 °C) and toluene (4-fold increase upon cooling from 100 to 50 °C). Ramifications on catalyst structure-function relationships are discussed, including comparisons between "outer sphere" mechanisms and "metal-ligand cooperation" mechanisms.

Understanding Terminal versus Bridging End-on N2 Coordination in Transition Metal Complexes.

Terminal and bridging end-on coordination of N2 to transition metal complexes offer possibilities for distinct pathways in ammonia synthesis and N2 functionalization. Here we elucidate the fundamental factors controlling the two binding modes and determining which is favored for a given metal-ligand system, using both quantitative density functional theory (DFT) and qualitative molecular orbital (MO) analyses. The Gibbs free energy for converting two terminal MN2 complexes into a bridging MNNM complex and a free N2 molecule (2ΔGeq°) is examined through systematic variations of the metal and ligands; values of ΔGeq° range between +9.1 and -24.0 kcal/mol per M-N2 bond. We propose a model that accounts for these broad variations by assigning a fixed π-bond order (BOπ) to the triatomic terminal MNN moiety that is equal to that of the free N2 molecule, and a variable BOπ to the bridging complexes based on the character (bonding or antibonding) and occupancy of the π-MOs in the tetratomic MNNM core. When the conversion from terminal to bridging coordination and free N2 is associated with an increase in the number of π-bonds (ΔBOeqπ > 0), the bridging mode is greatly favored; this condition is satisfied when each metal provides 1, 2, or 3 electrons to the π-MOs of the MNNM core. When each metal in the bridging complex provides 4 electrons to the MNNM π-MOs, ΔBOeqπ = 0; the equilibrium in this case is approximately ergoneutral and the direction can be shifted by dispersion interactions.

Photochemical H2 Evolution from Bis(diphosphine)nickel Hydrides Enables Low-Overpotential Electrocatalysis.

Molecules capable of both harvesting light and forming new chemical bonds hold promise for applications in the generation of solar fuels, but such first-row transition metal photoelectrocatalysts are lacking. Here we report nickel photoelectrocatalysts for H2 evolution, leveraging visible-light-driven photochemical H2 evolution from bis(diphosphine)nickel hydride complexes. A suite of experimental and theoretical analyses, including time-resolved spectroscopy and continuous irradiation quantum yield measurements, led to a proposed mechanism of H2 evolution involving a short-lived singlet excited state that undergoes homolysis of the Ni-H bond. Thermodynamic analyses provide a basis for understanding and predicting the observed photoelectrocatalytic H2 evolution by a 3d transition metal based catalyst. Of particular note is the dramatic change in the electrochemical overpotential: in the dark, the nickel complexes require strong acids and therefore high overpotentials for electrocatalysis; but under illumination, the use of weaker acids at the same applied potential results in a more than 500 mV improvement in electrochemical overpotential. New insight into first-row transition metal hydride photochemistry thus enables photoelectrocatalytic H2 evolution without electrochemical overpotential (at the thermodynamic potential or 0 mV overpotential). This catalyst system does not require sacrificial chemical reductants or light-harvesting semiconductor materials and produces H2 at rates similar to molecular catalysts attached to silicon.

Selecting Double Bond Positions with a Single Cation-Responsive Iridium Olefin Isomerization Catalyst.

The catalytic transposition of double bonds holds promise as an ideal route to alkenes of value as fragrances, commodity chemicals, and pharmaceuticals; yet, selective access to specific isomers is a challenge, normally requiring independent development of different catalysts for different products. In this work, a single cation-responsive iridium catalyst selectively produces either of two different internal alkene isomers. In the absence of salts, a single positional isomerization of 1-butene derivatives furnishes 2-alkenes with exceptional regioselectivity and stereoselectivity. The same catalyst, in the presence of Na+, mediates two positional isomerizations to produce 3-alkenes. The synthesis of new iridium pincer-crown ether catalysts based on an aza-18-crown-6 ether proved instrumental in achieving cation-controlled selectivity. Experimental and computational studies guided the development of a mechanistic model that explains the observed selectivity for various functionalized 1-butenes, providing insight into strategies for catalyst development based on noncovalent modifications.

Thermodynamic and kinetic hydricity of transition metal hydrides.

The prevalence of transition metal-mediated hydride transfer reactions in chemical synthesis, catalysis, and biology has inspired the development of methods for characterizing the reactivity of transition metal hydride complexes. Thermodynamic hydricity represents the free energy required for heterolytic cleavage of the metal-hydride bond to release a free hydride ion, H-, as determined through equilibrium measurements and thermochemical cycles. Kinetic hydricity represents the rate of hydride transfer from one species to another, as measured through kinetic analysis. This tutorial review describes the common methods for experimental and computational determination of thermodynamic and kinetic hydricity, including advice on best practices and precautions to help avoid pitfalls. The influence of solvation on hydricity is emphasized, including opportunities and challenges arising from comparisons across several different solvents. Connections between thermodynamic and kinetic hydricity are discussed, and opportunities for utilizing these connections to rationally improve catalytic processes involving hydride transfer are highlighted.

Kinetics of the Trans Effect in Ruthenium Complexes Provide Insight into the Factors That Control Activity and Stability in CO2 Electroreduction.

Comparative kinetic studies of a series of new ruthenium complexes provide a platform for understanding how strong trans effect ligands and redox-active ligands work together to enable rapid electrochemical CO2 reduction at moderate overpotential. After synthesizing isomeric pairs of ruthenium complexes featuring 2'-picolinyl-methyl-benzimidazol-2-ylidene (Mebim-pic) as a strong trans effect ligand and 2,2':6',2″-terpyridine (tpy) as a redox-active ligand, chemical and electrochemical kinetic studies examined how complex geometry and charge affect the individual steps and overall catalysis of CO2 reduction. The relative trans effect of picoline vs the N-heterocyclic carbene (NHC) was quantified through a kinetic analysis of reductively triggered chloride dissociation, revealing that chloride loss is 1000 times faster in the isomer with the NHC trans to chloride. The kinetics of CO dissociation from a site trans to the NHC were examined in a systematic study of isostructural carbonyl complexes across four different overall charges. The rate constants for CO loss span 12 orders of magnitude and are fastest upon two-electron reduction, leading to a hypothesis that redox-active ligands play a key role in promoting reductive CO dissociation during catalysis. Analogous studies of complexes featuring the picoline ligand trans to the carbonyl reveal the importance of the trans effect of the CO ligand itself, with picoline ligand dissociation observed upon reduction. The complexes with NHC trans to the active site proved to be active electrocatalysts capable of selective CO2 electroreduction to CO. In acidic solutions under a N2 atmosphere, on the other hand, H2 evolution proceeds via an intermediate that positions a hydride ligand trans to picoline. The mechanistic insight and quantitative kinetic parameters that arise from these studies help establish general principles for molecular electrocatalyst design.

(Electro-)chemical Splitting of Dinitrogen with a Rhenium Pincer Complex.

The splitting of N2 into well-defined terminal nitride complexes is a key reaction for nitrogen fixation at ambient conditions. In continuation of our previous work on rhenium pincer mediated N2 splitting, nitrogen activation and cleavage upon (electro)chemical reduction of [ReCl2(L2)] {L2 = N(CHCHPtBu2)2 -} is reported. The electrochemical characterization of [ReCl2(L2)] and comparison with our previously reported platform [ReCl2(L1)] {L1 = N(CH2CH2PtBu2)2 -} provides mechanistic insight to rationalize the dependence of nitride yield on the reductant. Furthermore, the reactivity of N2 derived nitride complex [Re(N)Cl(L2)] with electrophiles is presented.

The Trans Effect in Electrocatalytic CO2 Reduction: Mechanistic Studies of Asymmetric Ruthenium Pyridyl-Carbene Catalysts.

A comprehensive mechanistic study of electrocatalytic CO2 reduction by ruthenium 2,2':6',2″-terpyridine (tpy) pyridyl-carbene catalysts reveals the importance of stereochemical control to locate the strongly donating N-heterocyclic carbene ligand trans to the site of CO2 activation. Computational studies were undertaken to predict the most stable isomer for a range of reasonable intermediates in CO2 reduction, suggesting that the ligand trans to the reaction site plays a key role in dictating the energetic profile of the catalytic reaction. A new isomer of [Ru(tpy)(Mebim-py)(NCCH3)]2+ (Mebim-py is 1-methylbenzimidazol-2-ylidene-3-(2'-pyridine)) and both isomers of the catalytic intermediate [Ru(tpy)(Mebim-py)(CO)]2+ were synthesized and characterized. Experimental studies demonstrate that both isomeric precatalysts facilitate electroreduction of CO2 to CO in 95/5 MeCN/H2O with high activity and high selectivity. Cyclic voltammetry, infrared spectroelectrochemistry, and NMR spectroscopy studies provide a detailed mechanistic picture demonstrating an essential isomerization step in which the N-trans catalyst converts in situ to the C-trans variant. Insight into molecular electrocatalyst design principles emerge from this study. First, the use of an asymmetric ligand that places a strongly electron-donating ligand trans to the site of CO2 binding and activation is critical to high activity. Second, stereochemical control to maintain the desired isomer structure during catalysis is critical to performance. Finally, pairing the strongly donating pyridyl-carbene ligand with the redox-active tpy ligand proves to be useful in boosting activity without sacrificing overpotential. These design principles are considered in the context of surface-immobilized electrocatalysis.

Dinitrogen Reduction to Ammonium at Rhenium Utilizing Light and Proton-Coupled Electron Transfer.

The direct scission of the triple bond of dinitrogen (N2) by a metal complex is an alluring entry point into the transformation of N2 to ammonia (NH3) in molecular catalysis. Reported herein is a pincer-ligated rhenium system that reduces N2 to NH3 via a well-defined reaction sequence involving reductive formation of a bridging N2 complex, photolytic N2 splitting, and proton-coupled electron transfer (PCET) reduction of the metal-nitride bond. The new complex (PONOP)ReCl3 (PONOP = 2,6-bis(diisopropylphosphinito)pyridine) is reduced under N2 to afford the trans,trans-isomer of the bimetallic complex [(PONOP)ReCl2]2(µ-N2) as an isolable kinetic product that isomerizes sequentially upon heating into the trans,cis and cis,cis isomers. All isomers are inert to thermal N2 scission, and the trans,trans-isomer is also inert to photolytic N2 cleavage. In striking contrast, illumination of the trans,cis and cis,cis-isomers with blue light (405 nm) affords the octahedral nitride complex cis-(PONOP)Re(N)Cl2 in 47% spectroscopic yield and 11% quantum yield. The photon energy drives an N2 splitting reaction that is thermodynamically unfavorable under standard conditions, producing a nitrido complex that reacts with SmI2/H2O to produce a rhenium tetrahydride complex (38% yield) and furnish ammonia in 74% yield.

Mechanism of Chemical and Electrochemical N2 Splitting by a Rhenium Pincer Complex.

A comprehensive mechanistic study of N2 activation and splitting into terminal nitride ligands upon reduction of the rhenium dichloride complex [ReCl2(PNP)] is presented (PNP- = N(CH2CH2P tBu2)2-). Low-temperature studies using chemical reductants enabled full characterization of the N2-bridged intermediate [{(PNP)ClRe}2(N2)] and kinetic analysis of the N-N bond scission process. Controlled potential electrolysis at room temperature also resulted in formation of the nitride product [Re(N)Cl(PNP)]. This first example of molecular electrochemical N2 splitting into nitride complexes enabled the use of cyclic voltammetry (CV) methods to establish the mechanism of reductive N2 activation to form the N2-bridged intermediate. CV data was acquired under Ar and N2, and with varying chloride concentration, rhenium concentration, and N2 pressure. A series of kinetic models was vetted against the CV data using digital simulations, leading to the assignment of an ECCEC mechanism (where "E" is an electrochemical step and "C" is a chemical step) for N2 activation that proceeds via initial reduction to ReII, N2 binding, chloride dissociation, and further reduction to ReI before formation of the N2-bridged, dinuclear intermediate by comproportionation with the ReIII precursor. Experimental kinetic data for all individual steps could be obtained. The mechanism is supported by density functional theory computations, which provide further insight into the electronic structure requirements for N2 splitting in the tetragonal frameworks enforced by rigid pincer ligands.