Indigenous men's pathways to 'living the right kind of life and walking the right path' post incarceration in Canada: understanding the impacts of systemic oppression, and guidance for healing and (w)holistic sexual health.

Indigenous men around the world hold expertise over their own lives. Informed by this perspective, this study centres this experience to better understand what is needed to improve sexual health outcomes among a group of men with a history of incarceration. Semi-structured interviews were conducted with 10 Indigenous men with such a history. Through thematic analysis the study identified two major themes: 1) the impacts of systemic oppression; 2) the value of guidance in walking the right path. Men identified colonial trauma and the associated mental, physical, emotional and spiritual wounds stemming from systemic oppression as continuing to impact their wellbeing. Men also described the systems of support necessary to help guide them on their journeys through incarceration, rehabilitation and building strong and nurturing relationships. Findings from the study provide important guidance from Indigenous men for future more holistic sexual health intervention programming.

Mesoscale ocean fronts enhance carbon export due to gravitational sinking and subduction.

Enhanced vertical carbon transport (gravitational sinking and subduction) at mesoscale ocean fronts may explain the demonstrated imbalance of new production and sinking particle export in coastal upwelling ecosystems. Based on flux assessments from 238U:234Th disequilibrium and sediment traps, we found 2 to 3 times higher rates of gravitational particle export near a deep-water front (305 mg C⋅m-2⋅d-1) compared with adjacent water or to mean (nonfrontal) regional conditions. Elevated particle flux at the front was mechanistically linked to Fe-stressed diatoms and high mesozooplankton fecal pellet production. Using a data assimilative regional ocean model fit to measured conditions, we estimate that an additional ∼225 mg C⋅m-2⋅d-1 was exported as subduction of particle-rich water at the front, highlighting a transport mechanism that is not captured by sediment traps and is poorly quantified by most models and in situ measurements. Mesoscale fronts may be responsible for over a quarter of total organic carbon sequestration in the California Current and other coastal upwelling ecosystems.

Evaluation of an improved prototype mini-baghouse to control the release of respirable crystalline silica from sand movers.

The OSHA final rule on respirable crystalline silica (RCS) will require hydraulic fracturing companies to implement engineering controls to limit workers' exposure to RCS. RCS is generated by pneumatic transfer of quartz-containing sand during hydraulic fracturing operations. Chronic inhalation of RCS can lead to serious disease, including silicosis and lung cancer. NIOSH research identified at least seven sources where RCS aerosols were generated at hydraulic fracturing sites. NIOSH researchers developed an engineering control to address one of the largest sources of RCS aerosol generation, RCS escaping from thief hatches on the top of sand movers. The control, the NIOSH Mini-Baghouse Retrofit Assembly (NMBRA), mounts on the thief hatches. Unlike most commercially available engineering controls, the NMBRA has no moving parts and requires no power source. This article details the results of an evaluation of generation 3 of the NMBRA at a sand mine in Arkansas from May 19-21, 2015. During the evaluation, 168 area air samples were collected at 12 locations on and around a sand mover with and without the NMBRA installed. Analytical results for respirable dust and RCS indicated the use of the NMBRA effectively reduced concentrations of both respirable dust and RCS downwind of the thief hatches. Reductions of airborne respirable dust were estimated at 99+%; reductions in airborne RCS ranged from 98-99%. Analysis of bulk samples of the dust showed the likely presence of freshly fractured quartz, a particularly hazardous form of RCS. Use of an improved filter fabric and a larger area of filter cloth led to substantial improvements in filtration and pressures during these trials, as compared to the generation 2 NMBRA. Planned future design enhancements, including a weather cover, will increase the performance and durability of the NMBRA. Future trials are planned to evaluate the long-term operability of the technology.

Simultaneously reducing CO2 and particulate exposures via fractional recirculation of vehicle cabin air.

Prior studies demonstrate that air recirculation can reduce exposure to nanoparticles in vehicle cabins. However when people occupy confined spaces, air recirculation can lead to carbon dioxide (CO2) accumulation which can potentially lead to deleterious effects on cognitive function. This study proposes a fractional air recirculation system for reducing nanoparticle concentration while simultaneously suppressing CO2 levels in the cabin. Several recirculation scenarios were tested using a custom-programmed HVAC (heat, ventilation, air conditioning) unit that varied the recirculation door angle in the test vehicle. Operating the recirculation system with a standard cabin filter reduced particle concentrations to 1000 particles/cm3, although CO2 levels rose to 3000 ppm. When as little as 25% fresh air was introduced (75% recirculation), CO2 levels dropped to 1000 ppm, while particle concentrations remained below 5000 particles/cm3. We found that nanoparticles were removed selectively during recirculation and demonstrated the trade-off between cabin CO2 concentration and cabin particle concentration using fractional air recirculation. Data showed significant increases in CO2 levels during 100% recirculation. For various fan speeds, recirculation fractions of 50-75% maintained lower CO2 levels in the cabin, while still reducing particulate levels. We recommend fractional recirculation as a simple method to reduce occupants' exposures to particulate matter and CO2 in vehicles. A design with several fractional recirculation settings could allow air exchange adequate for reducing both particulate and CO2 exposures. Developing this technology could lead to reductions in airborne nanoparticle exposure, while also mitigating safety risks from CO2 accumulation.

Emissions from a Diesel Engine using Fe-based Fuel Additives and a Sintered Metal Filtration System.

A series of laboratory tests were conducted to assess the effects of Fe-containing fuel additives on aerosols emitted by a diesel engine retrofitted with a sintered metal filter (SMF) system. Emission measurements performed upstream and downstream of the SMF system were compared, for cases when the engine was fueled with neat ultralow sulfur diesel (ULSD) and with ULSD treated with two formulations of additives containing Fe-based catalysts. The effects were assessed for four steady-state engine operating conditions and one transient cycle. The results showed that the SMF system reduced the average total number and surface area concentrations of aerosols by more than 100-fold. The total mass and elemental carbon results confirmed that the SMF system was indeed very effective in the removal of diesel aerosols. When added at the recommended concentrations (30 p.p.m. of iron), the tested additives had minor adverse impacts on the number, surface area, and mass concentrations of filter-out (FOut) aerosols. For one of the test cases, the additives may have contributed to measurable concentrations of engine-out (EOut) nucleation mode aerosols. The additives had only a minor impact on the concentration and size distribution of volatile and semi-volatile FOut aerosols. Metal analysis showed that the introduction of Fe with the additives substantially increased Fe concentration in the EOut, but the SMF system was effective in removal of Fe-containing aerosols. The FOut Fe concentrations for all three tested fuels were found to be much lower than the corresponding EOut Fe concentrations for the case of untreated ULSD fuel. The results support recommendations that these additives should not be used in diesel engines unless they are equipped with exhaust filtration systems. Since the tested SMF system was found to be very efficient in removing Fe introduced by the additives, the use of these additives should not result in a measurable increase in emissions of de novo generated Fe-containing aerosols. The findings from this study should promote a better understanding of the benefits and challenges of using sintered metal systems and fuel additives to control the exposure of underground miners and other workers to diesel aerosols and gases.

Promoting early exposure monitoring for respirable crystalline silica: Taking the laboratory to the mine site.

The exposure to respirable crystalline silica (RCS) in the mining industry is a recognized occupational hazard. The assessment and monitoring of the exposure to RCS is limited by two main factors: (1) variability of the silica percent in the mining dust and (2) lengthy off-site laboratory analysis of collected samples. The monitoring of respirable dust via traditional or real-time techniques is not adequate. A solution for on-site quantification of RCS in dust samples is being investigated by the Office of Mine Safety and Health Research, a division of the National Institute for Occupational Safety and Health. The use of portable Fourier transform infrared analyzers in conjunction with a direct-on-filter analysis approach is proposed. The progress made so far, the necessary steps in progress, and the application of the monitoring solution to a small data set is presented. When developed, the solution will allow operators to estimate RCS immediately after sampling, resulting in timelier monitoring of RCS for self-assessment of compliance at the end of the shift, more effective engineering monitoring, and better evaluation of control technologies.

The development and testing of a prototype mini-baghouse to control the release of respirable crystalline silica from sand movers.

Inhalation of respirable crystalline silica (RCS) is a significant risk to worker health during well completions operations (which include hydraulic fracturing) at conventional and unconventional oil and gas extraction sites. RCS is generated by pneumatic transfer of quartz-containing sand during hydraulic fracturing operations. National Institute for Occupational Safety and Health (NIOSH) researchers identified concentrations of RCS at hydraulic fracturing sites that exceed 10 times the Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit (PEL) and up to 50 times the NIOSH Recommended Exposure Limit (REL). NIOSH research identified at least seven point sources of dust release at contemporary oil and gas extraction sites where RCS aerosols were generated. NIOSH researchers recommend the use of engineering controls wherever they can be implemented to limit the RCS released. A control developed to address one of the largest sources of RCS aerosol generation is the NIOSH mini-baghouse assembly, mounted on the thief hatches on top of the sand mover. This article details the results of a trial of the NIOSH mini-baghouse at a sand mine in Arkansas from November 18-21, 2013. During the trial, area air samples were collected at 12 locations on and around a sand mover with and without the mini-baghouse control installed. Analytical results for respirable dust and RCS indicate the use of the mini-baghouse effectively reduced both respirable dust and RCS downwind of the thief hatches. Reduction of airborne respirable dust ranged from 85-98%; reductions in airborne RCS ranged from 79-99%. A bulk sample of dust collected by the baghouse assembly showed the likely presence of freshly fractured quartz, a particularly hazardous form of RCS. Planned future design enhancements will increase the performance and durability of the mini-baghouse, including an improved bag clamp mechanism and upgraded filter fabric with a modified air-to-cloth ratio. Future trials are planned to determine additional respirable dust and RCS concentration reductions achieved through these design changes.

Novel 3-dimensional analysis to evaluate temporomandibular joint space and shape.

INTRODUCTION: The purpose of this study was to present and validate a novel semiautomated method for 3-dimensional evaluation of the temporomandibular joint (TMJ) space and condylar and articular shapes using cone-beam computed tomographic data. METHODS: The protocol for 3-dimensional analysis with the Checkpoint software (Stratovan, Davis, Calif) was established by analyzing cone-beam computed tomographic images of 14 TMJs representing a range of TMJ shape variations. Upon establishment of the novel method, analysis of 5 TMJs was further repeated by several investigators to assess the reliability of the analysis. RESULTS: Principal components analysis identified 3 key components that characterized how the condylar head shape varied among the 14 TMJs. Principal component analysis allowed determination of the minimum number of landmarks or patch density to define the shape variability in this sample. Average errors of landmark placement ranged from 1.15% to 3.65%, and none of the 121 landmarks showed significant average errors equal to or greater than 5%. Thus, the mean intraobserver difference was small and within the clinically accepted margin of error. Interobserver error was not significantly greater than intraobserver error, indicating that this is a reliable methodology. CONCLUSIONS: This novel semiautomatic method is a reliable tool for the 3-dimensional analysis of the TMJ including both the form and the space between the articular eminence and the condylar head.

Congenital and acquired mandibular asymmetry: Mapping growth and remodeling in 3 dimensions.

INTRODUCTION: Disordered craniofacial development frequently results in definitive facial asymmetries that can significantly impact a person's social and functional well-being. The mandible plays a prominent role in defining facial symmetry and, as an active region of growth, commonly acquires asymmetric features. Additionally, syndromic mandibular asymmetry characterizes craniofacial microsomia (CFM), the second most prevalent congenital craniofacial anomaly (1:3000 to 1:5000 live births) after cleft lip and palate. We hypothesized that asymmetric rates of mandibular growth occur in the context of syndromic and acquired facial asymmetries. METHODS: To test this hypothesis, a spherical harmonic-based shape correspondence algorithm was applied to quantify and characterize asymmetries in mandibular growth and remodeling in 3 groups during adolescence. Longitudinal time points were automatically registered, and regions of the condyle and posterior ramus were selected for growth quantification. The first group (n = 9) had a diagnosis of CFM, limited to Pruzansky-Kaban type I or IIA mandibular deformities. The second group (n = 10) consisted of subjects with asymmetric, nonsyndromic dentofacial asymmetry requiring surgical intervention. A control group (n = 10) of symmetric patients was selected for comparison. A linear mixed model was used for the statistical comparison of growth asymmetry between the groups. RESULTS: Initial mandibular shape and symmetry displayed distinct signatures in the 3 groups (P <0.001), with the greatest asymmetries in the condyle and ramus. Similarly, mandibular growth had unique patterns in the groups. The dentofacial asymmetry group was characterized by significant asymmetry in condylar and posterior ramal remodeling with growth (P <0.001). The CFM group was characterized by asymmetric growth of the posterior ramus (P <0.001) but relatively symmetric growth of the condyles (P = 0.47). CONCLUSIONS: Forms of CFM are characterized by active and variable growth of the dysplastic side, which has a distinct pattern from other disorders of mandibular growth.

Correlation of Airway Volume With Orthognathic Surgical Movement Using Cone-Beam Computed Tomography.

PURPOSE: Orthognathic surgery can induce changes in airway volume. The aim of this study was to determine whether there is a correlation of surgical movement of the maxilla or mandible to airway volume changes. MATERIALS AND METHODS: This was a prospective cohort study and the sample was composed of patients undergoing single-jaw orthognathic procedures from 2004 through 2007. Cone-beam computed tomograms were obtained before surgery (T0), immediately after surgery (T1), and at least 6 months after surgery (T2). The airway was segmented from 3-dimensional images and identified as the whole airway, consisting of the naso-, oro-, and hypopharynx. The volumetric percentage of change of the airway between time points was compared and correlated to the surgical movements using paired t test and cubic regression analysis. The level of statistical significance was set at a P value less than or equal to .05. RESULTS: The sample was composed of 33 patients. Sixteen patients underwent maxillary advancement with mean advancement of 5.4 mm (3 to 8 mm), 13 underwent mandibular advancement with mean advancement of 8.0 mm (5 to 15 mm), and 4 underwent mandibular setback of 4.0 mm. For maxillary advancement at T1, volume percentages of change for the whole airway and the naso-, oro-, and hypopharynx were 18.4 (P ≤ .05), 53.8 (P ≤ .05), 26.3, and 5.5%, respectively, and at T2, the changes were 10.0, 46.7 (P ≤ .05), 6.8, and 1.0%, respectively. For mandibular advancement at T1, volume percentages of change were 34.6 (P ≤ .05), 26.1, 54.1 (P ≤ .05), and 17.4%, respectively, and at T2, the changes were 15.0 (P ≤ .05), -3.7, 23.5 (P ≤ .05), and 12.1%, respectively. There were no meaningful long-term airway changes with mandibular setback. CONCLUSION: The study results suggest that there might be an anatomic limit to pharyngeal airway expansion associated with single-jaw orthognathic surgery.

Cone-beam computed tomographic comparison of surgically assisted rapid palatal expansion and multipiece Le Fort I osteotomy.

PURPOSE: To examine and compare the skeletal and dental effects of surgically assisted rapid palatal expansion (SARPE) and multipiece Le Fort osteotomy using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: This was a prospective cohort study. Patients underwent SARPE or multipiece Le Fort I osteotomy to address maxillary transverse deficiency. CBCT scans were taken preoperatively, immediately postoperatively or after retention, and at least 6 months postoperatively. Four landmark measurements and ratios of dental-to-skeletal change were used to follow skeletal and dental widths in the posterior and anterior maxillary regions. Wilcoxon signed-rank test and Wilcoxon 2-sample rank-sum test were used to compare the landmark measurements and the ratio of dental-to-skeletal change for the 2 surgeries. A P value less than .05 was statistically significant. RESULTS: Thirteen patients (mean, 28.3 yr old; 7 women) were enrolled: 9 were treated by multipiece Le Fort I osteotomy and 4 were treated by SARPE. The ratios of dental-to-skeletal expansion in the posterior maxilla for the Le Fort procedure and SARPE were 0.70 ± 0.41 and 25.20 ± 15.8, respectively, and the dental-to-skeletal relapses were 1.17 ± 0.80 and -3.63 ± 3.70, respectively. The ratios of dental-to-skeletal expansion in the anterior maxilla for the Le Fort procedure and SARPE were 0.58 ± 0.38 and 31.80 ± 59.4, respectively, and the dental-to-skeletal relapses were 2.25 ± 3.41 and 4.86 ± 8.10, respectively. CONCLUSION: There was greater correlation between dental and skeletal changes in the multipiece Le Fort procedure, indicating bodily separation of the segments, whereas the SARPE showed noteworthy dental and skeletal tipping. Dental relapse was greater than skeletal relapse for these 2 procedures.

Evaluation of Diffuse Reflection Infrared Spectrometry for End-of-Shift Measurement of α-quartz in Coal Dust Samples.

The inhalation of toxic substances is a major threat to the health of miners, and dust containing respirable crystalline silica (α-quartz) is of particular concern, due to the recent rise in cases of coal workers' pneumoconiosis and silicosis in some U.S. mining regions. Currently, there is no field-portable instrument that can measure airborne α-quartz and give miners timely feedback on their exposure. The U.S. National Institute for Occupational Safety and Health (NIOSH) is therefore conducting studies to investigate technologies capable of end-of-shift or real-time measurement of airborne quartz. The present study focuses on the potential application of Fourier transform infrared (FT-IR) spectrometry conducted in the diffuse reflection (DR) mode as a technique for measuring α-quartz in respirable mine dust. A DR accessory was used to analyze lab-generated respirable samples of Min-U-Sil 5 (which contains more than 90% α-quartz) and coal dust, at mass loadings in the ranges of 100-600 µg and 600-5300 µg, respectively. The dust samples were deposited onto three different types of filters, borosilicate fiberglass, nylon, and polyvinyl chloride (PVC). The reflectance, R, was calculated by the ratio of a blank filter and a filter with deposited mine dust. Results suggest that for coal and pure quartz dusts deposited on 37 mm PVC filters, measurements of -log R correlate linearly with known amounts of quartz on filters, with R(2) values of approximately 0.99 and 0.94, respectively, for samples loaded up to ∼4000 µg. Additional tests were conducted to measure quartz in coal dusts deposited onto the borosilicate fiberglass and nylon filter media used in the NIOSH-developed Personal Dust Monitor (PDM). The nylon filter was shown to be amenable to DR analysis, but quantification of quartz is more accurate when the filter is "free," as opposed to being mounted in the PDM filter holder. The borosilicate fiberglass filters were shown to produce excessive interference, making quartz quantification impossible. It was concluded that, while the DR/FT-IR method is potentially useful for on-filter measurement of quartz in dust samples, the use of PVC filters produced the most accurate results.

Quantifying silica in filter-deposited mine dusts using infrared spectra and partial least squares regression.

The feasibility of measuring airborne crystalline silica (α-quartz) in noncoal mine dusts using a direct-on-filter method of analysis is demonstrated. Respirable α-quartz was quantified by applying a partial least squares (PLS) regression to the infrared transmission spectra of mine-dust samples deposited on porous polymeric filters. This direct-on-filter method deviates from the current regulatory determination of respirable α-quartz by refraining from ashing the sampling filter and redepositing the analyte prior to quantification using either infrared spectrometry for coal mines or x-ray diffraction (XRD) from noncoal mines. Since XRD is not field portable, this study evaluated the efficacy of Fourier transform infrared spectrometry for silica determination in noncoal mine dusts. PLS regressions were performed using select regions of the spectra from nonashed samples with important wavenumbers selected using a novel modification to the Monte Carlo unimportant variable elimination procedure. Wavenumber selection helped to improve PLS prediction, reduce the number of required PLS factors, and identify additional silica bands distinct from those currently used in regulatory enforcement. PLS regression appeared robust against the influence of residual filter and extraneous mineral absorptions while outperforming ordinary least squares calibration. These results support the quantification of respirable silica in noncoal mines using field-portable infrared spectrometers.

Three-dimensional longitudinal changes in craniofacial growth in untreated hemifacial microsomia patients with cone-beam computed tomography.

INTRODUCTION: The purpose of this study was to evaluate the concept that the affected and contralateral sides do not grow at the same rate in patients with hemifacial microsomia. Changes in the cranial base, maxilla, mandible, and occlusal plane were evaluated on 3-dimensional images from cone-beam computed tomography data in untreated patients. METHODS: Six patients were classified as having mandibular Pruzansky/Kaban type I, IIA, or IIB hemifacial microsomia. Cone-beam computed tomography (MercuRay; Hitachi, Tokyo, Japan) scans were taken before orthodontic treatment during both growth and postpuberty periods. RESULTS: The cranial base as defined by the position of the mastoid process was in a different position between the affected and contralateral control sides. The nasomaxillary length or height was shorter on the affected side for all 6 patients with hemifacial microsomia regardless of its severity, and it grew less than on the contralateral control side in 5 of the 6 patients. The occlusal plane angle became more inclined in 4 of the 6 patients. The mandibular ramus was shorter on the affected side in all patients and grew less on the affected side in 5 of the 6 patients. The mandibular body grew slower, the same, or faster than on the control side. CONCLUSIONS: The cranial base, position of the condyle, lengths of the condyle and ramus, and positions of the gonial angle and condyle can vary between the affected and contralateral control sides of patients with hemifacial microsomia, with the ramus and nasomaxillary length usually growing slower than they grow on the control side. These results suggest that many factors affect the growth rate of the craniofacial region and, specifically, the mandible in patients with hemifacial microsomia.

Evaluation of a non-dispersive infrared spectrometer for quantifying organic and elemental carbon in diesel particulate matter.

Diesel particulate matter (DPM) is a common and well-known health hazard in the mining environment. The regulatory method for monitoring both the organic and elemental carbon (OC, EC) portions of DPM is a laboratory-based thermal-optical method with a typical turnaround time of one week. In order to evaluate exposure levels and take corrective action prior to overexposure, a portable real-time device capable of quantifying both OC and EC is needed. To that end, researchers from the National Institute for Occupational Safety and Health (NIOSH) designed and tested the feasibility of a device based on bandpass optical filters that target key infrared wavelengths associated with DPM and its spectroscopic baseline. The resulting device, referred to here as a non-dispersive infrared (NDIR) spectrometer could serve as the basis of a cost-effective, field-portable alternative to the laboratory thermal-optical method. The limits of quantification (LOD) indicate that the NDIR spectrometer can quantify EC, OC, and TC provided they are present at 20, 37, and 46 µg/m3 or more, respectively. In the event that the NDIR spectrometer is integrated with a sampler and filter tape the LOD is estimated to be reduced to 13, 7, and 10 µg/m3 for EC, OC, and TC, respectively. These LOD estimates assume a face velocity of 59 cm/s and a sampling time of 30 min.

Predicting tooth-size discrepancy: A new formula utilizing revised landmarks and 3-dimensional laser scanning technology.

INTRODUCTION: The goal of this study was to develop a more accurate formula to forecast tooth-size discrepancies in patients based on not only the size of the whole teeth but also functional arch components derived from normal cusp-fossa interdigitation that should be obtained as the final treatment goal. METHODS: A total of 141 dental casts from Dr Larry Andrews' collection of "normal occlusions" that never received orthodontic treatment were scanned with an Ortho Insight 3D Laser Scanner (Motion View Software, Chattanooga, Tenn). Individual tooth sizes and portions of tooth sizes were measured with the Motion View Software. For each set of models, potential tooth-size discrepancies were calculated by using both the original Bolton analysis and the new Johnson/Bailey analysis developed by this team at the University of California at San Francisco (UCSF). Six tooth-size discrepancy ratios were computed and included the Bolton (2) and the new (4) Johnson/Bailey analysis ratios for the anterior arch component, posterior arch component, and overall ratio of the maxillary and mandibular arches. The Johnson/Bailey analysis utilized different landmarks and groups of teeth. It consequently divided the maxillary segment by the mandibular segment, in contrast to the Bolton ratios, which divided the mandibular sums by the maxillary totals. RESULTS: The Bolton anterior segment ratio ranged from 70.68 to 84.81, with a mean of 77.91 (SD, 2.43) (3.1%). The Bolton overall ratio ranged from 86.19 to 96.62, with a mean of 91.64 (SD, ±1.74) (1.8%). The Johnson/Bailey posterior discrepancy ratio ranged from 0.98 to 1.23, with a mean of 1.10 (SD, ±0.04) (3.6%). Its anterior discrepancy ratio ranged from 0.91 to 1.14, with a mean of 1.03 (SD, ±0.04) (3.9%). The Johnson/Bailey overall discrepancy ratio ranged from 0.98 to 1.15, with a mean of 1.06 (SD, ±0.03) (2.8%). CONCLUSIONS: Two methods were used to forecast tooth-size discrepancies between opposing arches in a sample with clinically acceptable occlusions. The new approach provided more specific ratios utilizing more clinically relevant functional arch components derived from dental cusp-fossa interdigitation.

Evaluation of a self-cleaning portable dust collector for reducing worker exposures to silica at hydraulic-fracturing sites.

National Institute for Occupational Safety and Health (NIOSH) researchers continue to study worker exposure to respirable crystalline silica (RCS) and develop interventions to reduce these exposures. Occupational overexposures to RCS continue to cause illness and deaths in many industries and RCS has been identified as a serious exposure risk associated with hydraulic- fracturing operations during oil and gas extraction. In 2016 the Occupational Safety and Health Administration (OSHA) reduced the permissible exposure limit (PEL) to 0.05 milligrams of silica per cubic meter of air, averaged over an 8-hour day. This mandate requires hydraulic-fracturing operations to implement dust controls and safer work methods to protect workers from silica exposures above this PEL by June 23, 2021. At hydraulic-fracturing sites utilizing sand movers, pneumatic transfer of fracking sand is the primary source of aerosolized RCS. Currently, there are limited commercially available engineering controls for the collection of dust emitted from thief hatches on sand movers. The goal of this research is to develop a robust, cost-effective, weather resistant, portable, self-cleaning dust collection system that can be retrofitted onto sand mover thief hatches. A prototype was designed, built, and tested, and it was determined that the system could handle flows in the range of 600 to 1300 cfm with loading/cleaning cycle times of 40 and 5 minutes respectively and demonstrated operating efficiencies of 97-99%. Further development of this NIOSH prototype is being done in collaboration with an industry partner with the goal of developing a commercially viable, cost-effective solution to reduce RCS at hydraulic-fracturing sites around the world.Implications: This research has verified that airborne dust created by pneumatic transfer of fracking sand can be effectively collected using a passive cartridge filter system, and that the filters can be cleaned using blasts of air. Mounting these units to the thief hatches of sand movers will significantly reduce dust emissions from sand movers on hydraulic fracturing sites. Thus, this system offers the Oil and Gas Industry a method to reduce worker exposure to RCS on hydraulic fracturing sites that utilize sand movers. The success of this prototype has led researchers to devise a modified version for collecting dust at conveyor transfer points.

Short chain fatty acids reduce the respiratory burst of human neutrophils in response to cystic fibrosis isolates of Staphylococcus aureus.

Short chain fatty acids (SCFA) are produced by anaerobic bacteria. The most common SCFAs are acetate, propionate and butyrate. SCFAs have been implicated in several inflammatory diseases including cystic fibrosis (CF) where they are present in the airways at millimolar concentrations. Staphylococcus aureus is one of the main respiratory pathogens in CF. Polymorphonuclear neutrophil granulocytes (PMN) represent the most important immune defense the host uses against S. aureus. However, the reason why PMNs are unable to clear S. aureus in CF remains largely unclear. We hypothesized that SCFAs impair effector functions of PMNs in response to S. aureus. To test this, human PMNs were exposed to CF clinical isolates of S. aureus in vitro in the presence or absence of SCFAs and effector functions of PMNs were assessed. Our data show that SCFAs do not affect the viability of PMNs and do not stimulate the release of neutrophil extracellular traps (NET) from human PMNs. Production of reactive oxygen species (ROS), another important antimicrobial function of PMNs, on the other hand, was significantly inhibited by SCFAs in response to the bacterium. SCFAs did not compromise the ability of PMNs to kill CF isolates of S. aureus in vitro. Overall, our results provide new knowledge into the interactions between SCFAs and the immune system, and indicate that SCFAs produced by anaerobic bacteria in the CF lung could interfere with reactive oxidant production of PMNs in response to S. aureus, one of the prominent respiratory pathogens in this disease.

Oceanic SACZ produces an abnormally wet 2021/2022 rainy season in South America.

The oceanic South Atlantic Convergence Zone (SACZ) has played a major role during South America's 2021/2022 summer extreme rainy season, being responsible for more than 90% of the precipitation in some regions of Southeast Brazil and in some regions of the Southwestern Atlantic Ocean (SWA). The summer of 2021/2022 was unique and rare and considered an abnormally humid season as verified by official Brazilian Institutes. First, the unusual number of cases of SACZ episodes (seven), was the highest recorded in the last decade. Second, all the cases that occurred were oceanic SACZ that assumed characteristics of an Atmospheric River and produced an excessively anomalous amount of precipitation during this period. Excess precipitation along with the regions located in mountainous and very uneven relief, which by orographic effects favors high precipitation volumes, were responsible for amplifying the observed impacts, such as landslides and floods that caused several losses to society. We also showed the main effects of coupling and interaction between the waters of the surface layer of the SWA and the atmosphere. Our learning from this study ends with the unprecedented results of how the marine atmospheric boundary layer (MABL) is locally modulated by the sea surface temperature (SST) that lies just below it. Until the present moment, we emphasize that this important mechanism has not been widely highlighted in the literature, showing that even though the ocean is colder than before oceanic SACZ is established, it is still warmer than the overlying air, thus, the ocean continues to be an active source of heat and moisture for the atmosphere and enhances the MABL instability process.

The protein interaction network of a taxis signal transduction system in a halophilic archaeon.

BACKGROUND: The taxis signaling system of the extreme halophilic archaeon Halobacterium (Hbt.) salinarum differs in several aspects from its model bacterial counterparts Escherichia coli and Bacillus subtilis. We studied the protein interactions in the Hbt. salinarum taxis signaling system to gain an understanding of its structure, to gain knowledge about its known components and to search for new members. RESULTS: The interaction analysis revealed that the core signaling proteins are involved in different protein complexes and our data provide evidence for dynamic interchanges between them. Fifteen of the eighteen taxis receptors (halobacterial transducers, Htrs) can be assigned to four different groups depending on their interactions with the core signaling proteins. Only one of these groups, which contains six of the eight Htrs with known signals, shows the composition expected for signaling complexes (receptor, kinase CheA, adaptor CheW, response regulator CheY). From the two Hbt. salinarum CheW proteins, only CheW1 is engaged in signaling complexes with Htrs and CheA, whereas CheW2 interacts with Htrs but not with CheA. CheY connects the core signaling structure to a subnetwork consisting of the two CheF proteins (which build a link to the flagellar apparatus), CheD (the hub of the subnetwork), two CheC complexes and the receptor methylesterase CheB. CONCLUSIONS: Based on our findings, we propose two hypotheses. First, Hbt. salinarum might have the capability to dynamically adjust the impact of certain Htrs or Htr clusters depending on its current needs or environmental conditions. Secondly, we propose a hypothetical feedback loop from the response regulator to Htr methylation made from the CheC proteins, CheD and CheB, which might contribute to adaptation analogous to the CheC/CheD system of B. subtilis.