RESUMO
Antiplatelet therapy is the mainstay of pharmacologic treatment to prevent thrombotic or ischemic events in patients with coronary artery disease treated with percutaneous coronary intervention and those treated medically for an acute coronary syndrome. The use of antiplatelet therapy comes at the expense of an increased risk of bleeding complications. Defining the optimal intensity of platelet inhibition according to the clinical presentation of atherosclerotic cardiovascular disease and individual patient factors is a clinical challenge. Modulation of antiplatelet therapy is a medical action that is frequently performed to balance the risk of thrombotic or ischemic events and the risk of bleeding. This aim may be achieved by reducing (ie, de-escalation) or increasing (ie, escalation) the intensity of platelet inhibition by changing the type, dose, or number of antiplatelet drugs. Because de-escalation or escalation can be achieved in different ways, with a number of emerging approaches, confusion arises with terminologies that are often used interchangeably. To address this issue, this Academic Research Consortium collaboration provides an overview and definitions of different strategies of antiplatelet therapy modulation for patients with coronary artery disease, including but not limited to those undergoing percutaneous coronary intervention, and consensus statements on standardized definitions.
Assuntos
Síndrome Coronariana Aguda , Doença da Artéria Coronariana , Intervenção Coronária Percutânea , Trombose , Humanos , Inibidores da Agregação Plaquetária/efeitos adversos , Doença da Artéria Coronariana/complicações , Hemorragia/etiologia , Plaquetas , Terapia Antiplaquetária Dupla/efeitos adversos , Síndrome Coronariana Aguda/terapia , Trombose/etiologia , Intervenção Coronária Percutânea/efeitos adversos , Resultado do TratamentoRESUMO
BACKGROUND: Stent thrombosis (ST) is a serious complication after drug-eluting stents (DES) implantation. To identify the risk factors of mortality following ST, we evaluated adverse event reports used for safety measures after approval.MethodsâandâResults:Between July 2004 and August 2019, 2,887 ST case reports were submitted to the Pharmaceutical and Medical Device Agency. Reports of probable or possible ST (n=604), with insufficient data regarding in-hospital outcome or duration between procedure and ST occurrence (n=37) or duplicate reports (n=191) were excluded. Accordingly, 2,045 reports with definite ST were analyzed. Among the subjects, there were 286 in-hospital deaths (14.0%). Multivariate logistic regression analysis revealed that left main trunk (LMT) (odds ratio [OR]: 4.76, 95% confidence interval [CI]: 3.26-6.96), chronic heart failure (CHF) (OR: 2.88, 95% CI: 1.61-5.14), hemodialysis (OR: 2.69, 95% CI: 1.66-4.36), prior stroke (OR: 2.28, 95% CI: 1.15-4.51), over 70 years old (OR: 1.62, 95% CI: 1.22-2.16), and right coronary artery (OR: 0.41, 95% CI: 0.27-0.63) were independent factors for in-hospital death after DES-ST. CONCLUSIONS: LMT, CHF, hemodialysis, prior stroke, and older age were independently associated with higher risk of in-hospital death following DES-ST. If target patients have these factors, maximum preventive strategies against ST occurrence, including adequate dual-antiplatelet therapy duration and optimal DES deployment procedures, are required.
Assuntos
Trombose Coronária/etiologia , Trombose Coronária/mortalidade , Stents Farmacológicos/efeitos adversos , Mortalidade Hospitalar , Intervenção Coronária Percutânea/efeitos adversos , Fatores Etários , Idoso , Idoso de 80 Anos ou mais , Doença da Artéria Coronariana/complicações , Doença da Artéria Coronariana/epidemiologia , Trombose Coronária/epidemiologia , Trombose Coronária/prevenção & controle , Feminino , Insuficiência Cardíaca/complicações , Insuficiência Cardíaca/epidemiologia , Humanos , Japão/epidemiologia , Masculino , Pessoa de Meia-Idade , Inibidores da Agregação Plaquetária/uso terapêutico , Diálise Renal/efeitos adversos , Fatores de Risco , Acidente Vascular Cerebral/complicações , Acidente Vascular Cerebral/epidemiologia , Resultado do TratamentoRESUMO
Future development of innovative artificial organs is closely related with cutting edge emerging technology. These technologies include brain machine or computer interface, organs made by three dimensional bioprinting, organs designed from induced-pluripotent stem cell for personalized tissue or organ, and xenotransplantation. To bridge the gap between scientific innovation and regulatory product review, Pharmaceuticals and Medical Devices Agency of Japan (PMDA) started the science board to discuss about the new scientific topics regarding medical products including medical device and regenerative products with external experts since 2012. Topics which PMDA raised for science board included cellular and tissue-based products from iPS cells, artificial intelligence and genome editing technology. In addition, PMDA started the horizon scanning to identify a new cutting edge technology which could potentially lead to innovative health technology or product, which has a strong impact on clinical medicine. Although the effectiveness and safety of the medical products must be reasonably assured before clinical use, PMDA introduced Sakigake review assignment (a review partner of device development) and conditional approval system to balance between pre-market and post-market evaluation.
Assuntos
Inteligência Artificial , Órgãos Artificiais , Biotecnologia , Aprovação de Equipamentos/legislação & jurisprudência , Aprovação de Drogas/legislação & jurisprudência , Humanos , JapãoRESUMO
PURPOSE: Postoperative adhesions can be prevented by the use of bioabsorbable anti-adhesion barriers. Although the occurrence of postoperative bowel obstruction is an important concern for patients, at the time of approval of anti-adhesion barriers, its effectiveness in preventing postoperative bowel obstruction had not been evaluated. We aimed to retrospectively evaluate the incidence of bowel obstruction after colectomy in patients with colon cancer using an insurance claims database. METHODS: This retrospective cohort study analyzed the data of colon cancer patients (between 2005 and 2017 from a national insurance claims database) who underwent colectomies to compare the proportion of individuals with postoperative bowel obstruction between the barrier and no barrier groups. RESULTS: Of the 587 patients who met the inclusion criteria, 308 and 279 patients were identified as the barrier and no barrier groups, respectively. The incidence of postoperative bowel obstruction was significantly lower in the barrier group (log-rank test, P = 0.0483). The cumulative incidence of postoperative bowel obstruction 37 months after the initial colectomy was 6.1% and 10.9% in the barrier and no barrier groups, respectively. Moreover, consistent results were obtained in the matched cohort. CONCLUSION: In colectomies for patients with colon cancer, the use of anti-adhesion barriers could significantly reduce the incidence of postoperative bowel obstruction. Evaluations using insurance claims databases could provide important information on outcomes following implementation of medical devices.
Assuntos
Colectomia , Neoplasias do Colo , Bases de Dados Factuais , Obstrução Intestinal , Complicações Pós-Operatórias , Humanos , Obstrução Intestinal/prevenção & controle , Obstrução Intestinal/etiologia , Neoplasias do Colo/cirurgia , Estudos Retrospectivos , Colectomia/efeitos adversos , Masculino , Feminino , Aderências Teciduais/prevenção & controle , Pessoa de Meia-Idade , Idoso , Complicações Pós-Operatórias/prevenção & controle , Complicações Pós-Operatórias/epidemiologia , Implantes Absorvíveis , Incidência , AdultoRESUMO
The identification and management of patients at high bleeding risk (HBR) undergoing transcatheter aortic valve implantation (TAVI) are of major importance, but the lack of standardised definitions is challenging for trial design, data interpretation, and clinical decision-making. The Valve Academic Research Consortium for High Bleeding Risk (VARC-HBR) is a collaboration among leading research organisations, regulatory authorities, and physician-scientists from Europe, the USA, and Asia, with a major focus on TAVI-related bleeding. VARC-HBR is an initiative of the CERC (Cardiovascular European Research Center), aiming to develop a consensus definition of TAVI patients at HBR, based on a systematic review of the available evidence, to provide consistency for future clinical trials, clinical decision-making, and regulatory review. This document represents the first pragmatic approach to a consistent definition of HBR evaluating the safety and effectiveness of procedures, devices and drug regimens for patients undergoing TAVI..
Assuntos
Consenso , Hemorragia , Substituição da Valva Aórtica Transcateter , Humanos , Substituição da Valva Aórtica Transcateter/efeitos adversos , Fatores de Risco , Hemorragia/etiologia , Medição de Risco , Estenose da Valva Aórtica/cirurgia , Valva Aórtica/cirurgiaRESUMO
BACKGROUND: Stent thrombosis (ST) is a rare but serious complication after deployment of a drug-eluting stent. The features of ST after implantation of an everolimus-eluting stent (EES) have not been fully elucidated. METHODS: A comprehensive survey of real-world adverse event reporting with conditions for approval under the Pharmaceuticals and Medical Devices Act identified 490 cases of ST with EES. A total of 370 patients with definite ST after EES implantation [287 with early (E)ST (within 30 days), 54 with late (L)ST (31-365 days), and 29 with very late (VL)ST (over 1â¯year)] were divided into an EST group and an LST/VLST group to compare the patients and lesions characteristics. RESULTS: The frequency of patients with hemodialysis and in-stent restenosis (ISR) lesions were significantly higher in the LST/VLST group than in the EST group (hemodialysis, 22.9% vs 2.7%, pâ¯=â¯0.0001; ISR lesions, 25.9% vs 9.4%, pâ¯=â¯0.0001). Characteristic demographic factors for LST/VLST versus EST identified by multivariable model were hemodialysis and ISR lesions (hemodialysis: odds ratio 7.348, 95% confidence interval 2.458-21.968, pâ¯=â¯0.0001; ISR lesions: odds ratio, 2.490, 95% confidence interval 1.100-5.638, pâ¯=â¯0.027). The in-hospital death rates from ST were not significantly different between the EST group and the LST/VLST group (EST, 15% vs LST/VLST, 21.7%, pâ¯=â¯0.147). CONCLUSIONS: Patient-related and lesion-related characteristics were significantly different between EST and LST/VLST. Data collection from adverse event reporting could be a helpful strategy for evaluation of this serious but rare complication.
Assuntos
Stents Farmacológicos/efeitos adversos , Everolimo/efeitos adversos , Imunossupressores/efeitos adversos , Trombose/etiologia , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Trombose/mortalidadeRESUMO
Artificial organs could be controlled using autonomic neural signals, because they exhibit rapid responses to physical needs similar to those of natural organs. A nerve electrode must satisfy many requirements to measure autonomous neural signals such as a long lifetime, high signal-to-noise ratio, multichannel recording, simple installation into a nerve fascicle, and good manufacturing productivity. The purpose of our study is to propose and evaluate a novel nerve electrode that satisfies these conditions, which to date has not been developed. A novel intrafascicular nerve electrode was designed, fabricated, and evaluated on autonomic nerves. Conventional extrafascicular and intrafascicular nerve electrodes were fabricated and tested for comparison to our novel intrafascicular nerve electrode. The novel intrafascicular nerve electrode had a 3-week lifetime, whereas the conventional extrafascicular nerve electrode had a 2-week lifetime. The signal-to-noise ratio was improved from 1.6 to 2.0 compared with the conventional extrafascicular nerve electrode. The novel intrafascicular nerve electrode was easier to install into a nerve fascicle and had better manufacturing productivity than the conventional intrafascicular nerve electrode. We succeeded in demonstrating the feasibility of our novel intrafascicular nerve electrode.
Assuntos
Vias Autônomas , Eletrodos , Animais , Órgãos Artificiais , Vias Autônomas/cirurgia , Engenharia Biomédica , Desenho de Equipamento , CoelhosRESUMO
Cavitation on mechanical heart valves (MHVs) could cause the mechanical failure of the occluder. A simple and reliable in vitro test method to evaluate cavitation potential must be developed. The bubble implosion damages the MHV material; thus, observing the behavior of the bubble implosion is essential. According to sonoluminescence, the collapsing cavity emits faint light. Therefore, in this study, the bubble collapse was analyzed both temporally and spatially by observing faint light emission. A photon counting system has been developed using a photomultiplier tube (H7360-01, Hamamatsu Photonics, Japan). The highest time resolution of this system is 5 microsec. A quartz optical fiber bundle of 2 mm diameter can be connected to this photomultiplier tube and traversed two-dimensionally over the MHV. The closure of the MHV triggers the photon counter, and the photons through 500 beats are recorded and integrated. A 20 mm Björk-Shiley valve was submerged in a water tank containing 10 L deionized water, and the pressure difference of 120 mm Hg was exerted on the valve at a rate of 60 bpm with a pulse duplicator. Approximately 700 microsec after the valve closure, light emission was detected along the edge of the occluder on the inflow side in the major orifice. Then, approximately 1,000 microsec after the closure, light along the occluder's edge in the minor orifice was recorded as well. Compared with the analysis, using a stroboscope and a high-speed camera, faint light was emitted from the collapsing cavities. In conclusion, sonoluminescnece was successfully observed around the MHV, and the photon counting technique and the traversing mechanism of the optical fiber bundle revealed the temporal and spatial distribution of the cavity collapse on the MHV.
Assuntos
Próteses Valvulares Cardíacas/efeitos adversos , Luz , Falha de Prótese , Engenharia Biomédica , Fótons , Desenho de Prótese , Estroboscopia/métodos , Fatores de TempoRESUMO
The undulation pump is a small, continuous flow displacement type blood pump, and the undulation pump total artificial heart (UPTAH) is a unique, implantable total artificial heart based on this pump. To improve the durability of the UPTAH for investigating long-term pathophysiology with UPTAH, a third model (UPTAH3) has been developed. UPTAH3 was designed to separate the left and right undulation shafts and to be more durable. The undulation pumps were also redesigned. UPTAH3 was implemented with a diameter of 76 mm, width of 78 or 79 mm, total volume of 292 ml, and weight of 620 g. The priming volumes of the left and right pumps are 26 and 21 ml, respectively. The atrial cuffs and outflow cannulae were also redesigned for UPTAH3. The maximum output against an arterial pressure load of 100 mm Hg is about 11 L/min. The maximum pump efficiency is about 15% in the left pump and 18% in the right pump, giving a maximum total efficiency for both of about 11%. To date, UPTAH3 has been tested in 17 goats, and the longest survival period was 46 days. This third model will be useful for investigating pathophysiology with UPTAH.
Assuntos
Coração Artificial , Desenho de Prótese , Animais , Pressão Sanguínea , Cabras , Fluxo PulsátilRESUMO
We have developed a new technology for producing three-dimensional (3D) biological structures composed of living cells and hydrogel in vitro, via the direct and accurate printing of cells with an inkjet printing system. Various hydrogel structures were constructed with our custom-made inkjet printer, which we termed 3D bioprinter. In the present study, we used an alginate hydrogel that was obtained through the reaction of a sodium alginate solution with a calcium chloride solution. For the construction of the gel structure, sodium alginate solution was ejected from the inkjet nozzle (SEA-Jet, Seiko Epson Corp., Suwa, Japan) and was mixed with a substrate composed of a calcium chloride solution. In our 3D bioprinter, the nozzle head can be moved in three dimensions. Owing to the development of the 3D bioprinter, an innovative fabrication method that enables the gentle and precise fixation of 3D gel structures was established using living cells as a material. To date, several 3D structures that include living cells have been fabricated, including lines, planes, laminated structures, and tubes, and now, experiments to construct various hydrogel structures are being carried out in our laboratory.
Assuntos
Hidrogel de Polietilenoglicol-Dimetacrilato/química , Tinta , Impressão , Engenharia Tecidual/instrumentação , Engenharia Tecidual/métodos , Alginatos/química , Animais , Materiais Biocompatíveis/química , Cloreto de Cálcio/química , Bovinos , Técnicas de Cultura de Células , Células Cultivadas , Células Endoteliais/citologia , Desenho de Equipamento , Estudos de Viabilidade , Fibrinogênio/química , Vidro/química , Ácido Glucurônico/química , Células HeLa , Ácidos Hexurônicos/química , Humanos , Ácido Hialurônico/química , Microesferas , Álcool de Polivinil/química , Soluções , ViscosidadeRESUMO
The rotary undulation pump is believed to be a good candidate for the next-generation artificial heart. Due to its complex movement, it is desirable to magnetically levitate the rotor and dynamically control the gap. In this article, the applicability of a fiber-optic gap sensor to the dynamic position control of the rotor in the rotary undulation pump was investigated. The fiber-optic gap sensor consisted of two plastic-core fibers and a reflection plate. Two 1-mm-diameter optical fibers were aligned parallel: one for source light propagation and the other for reflected light transmission. The basic properties of gap sensors using four different light sources were explored in five media (air, physiologic saline, and blood samples with three different hematocrit levels). The influence of the oxygen saturation level in the blood on sensing was investigated with two types of light sources. It is desirable to use a light source the wavelength of which shows similar absorption coefficients for both oxygenated blood and deoxygenated blood. The effect of the distance between the two fibers on the sensing and range was also investigated. The results indicated that the fiber-optic gap sensor is quite promising for the active control of rotor positioning in the rotary undulation pump.
Assuntos
Tecnologia de Fibra Óptica , Coração Artificial , Animais , Cabras , Hemorreologia , Magnetismo , Fibras Ópticas , Desenho de PróteseRESUMO
We have developed internal battery systems for driving an undulation pump ventricular assist device using two kinds of lithium ion rechargeable batteries. The lithium ion rechargeable batteries have high energy density, long life, and no memory effect; however, rise in temperature of the lithium ion rechargeable battery is a critical issue. Evaluation of temperature rise by means of numerical estimation is required to develop an internal battery system. Temperature of the lithium ion rechargeable batteries is determined by ohmic loss due to internal resistance, chemical loss due to chemical reaction, and heat release. Measurement results of internal resistance (R(cell)) at an ambient temperature of 37 degrees C were 0.1 Omega in the lithium ion (Li-ion) battery and 0.03 Omega in the lithium polymer (Li-po) battery. Entropy change (DeltaS) of each battery, which leads to chemical loss, was -1.6 to -61.1 J/(mol.K) in the Li-ion battery and -9.6 to -67.5 J/(mol.K) in the Li-po battery depending on state of charge (SOC). Temperature of each lithium ion rechargeable battery under a discharge current of 1 A was estimated by finite element method heat transfer analysis at an ambient temperature of 37 degrees C configuring with measured R(cell) and measured DeltaS in each SOC. Results of estimation of time-course change in the surface temperature of each battery coincided with results of measurement results, and the success of the estimation will greatly contribute to the development of an internal battery system using lithium ion rechargeable batteries.
Assuntos
Fontes de Energia Elétrica , Coração Auxiliar , Lítio , Termodinâmica , HumanosRESUMO
The development of mechanical circulatory support devices at the University of Tokyo has focused on developing a small total artificial heart (TAH) since achieving 532 days of survival of an animal with a paracorporial pneumatically driven TAH. The undulation pump was invented to meet this purpose. The undulation pump total artificial heart (UPTAH) is an implantable TAH that uses an undulation pump. To date, the UPTAH has been implanted in 71 goats weighting from 39 to 72 kg. The control methods are very important in animal experiments, and sucking control was developed to prevent atrial sucking. Rapid left-right balance control was performed by monitoring left atrial pressure to prevent acute lung edema caused by the rapid increase in both arterial pressure and venous return associated with the animal becoming agitated. Additionally, 1/R control was applied to stabilize the right atrial pressure. By applying these control methods, seven goats survived more than 1 month. The maximum survival period was 63 days. We are expecting to carry out longer term animal experiments with a recent model of TAH. In addition to the TAH, an undulation pump ventricular assist device (UPVAD), which is an implantable ventricular assist device (VAD), has been in development since 2002, based on the technology of the UPTAH. The UPVAD was implanted in six goats; three goats survived for more than 1 month. While further research and development is required to complete the the UPVAD system, the UPVAD has good potential to be realized as an implantable pulsatile-flow VAD.
Assuntos
Coração Auxiliar , Desenho de Prótese , Animais , Tóquio , UniversidadesRESUMO
We have been developing an implantable battery system using three series-connected lithium ion batteries having an energy capacity of 1,800 mAh to drive an undulation pump left ventricular assist device. However, the lithium ion battery undergoes an exothermic reaction during the discharge phase, and the temperature rise of the lithium ion battery is a critical issue for implantation usage. Heat generation in the lithium ion battery depends on the intensity of the discharge current, and we obtained a relationship between the heat flow from the lithium ion battery q(c)(I) and the intensity of the discharge current I as q(c)(I) = 0.63 x I (W) in in vitro experiments. The temperature distribution of the implantable battery system was estimated by means of three-dimentional finite-element method (FEM) heat transfer analysis using the heat flow function q(c)(I), and we also measured the temperature rise of the implantable battery system in in vitro experiments to conduct verification of the estimation. The maximum temperatures of the lithium ion battery and the implantable battery case were measured as 52.2 degrees C and 41.1 degrees C, respectively. The estimated result of temperature distribution of the implantable battery system agreed well with the measured results using thermography. In conclusion, FEM heat transfer analysis is promising as a tool to estimate the temperature of the implantable lithium ion battery system under any pump current without the need for animal experiments, and it is a convenient tool for optimization of heat transfer characteristics of the implantable battery system.
Assuntos
Fontes de Energia Elétrica , Equipamentos e Provisões , Coração Artificial , Temperatura Alta , Análise de Elementos Finitos , Lítio , TemperaturaRESUMO
We have developed an automatic diagnosis system of an artificial heart in order to ensure the safety of the patient implanted with the artificial heart. The automatic diagnosis system is composed of an electro-stethoscope system, adaptive noise canceller (ANC), and artificial neural network (ANN). The ANC effectively eliminates ambient noise from the sound signal of the artificial heart detected by the electro-stethoscope, and a filtered sound signal is separated into each frequency components by fast Fourier transformation. Each frequency component of an artificial heart's acoustic signal is fed into the ANN in order to make a diagnosis of pump condition. The automatic diagnosis system was evaluated in mock circulatory tests and a long-term animal experiment using a goat implanted with an undulation pump ventricular assist device (UPVAD). In mock circulatory tests, the ANN was able to detect pump failing conditions, which were occlusion of inflow and outflow cannula and deterioration of the ball bearing. In a long-term animal experiment, after training the ANN using UPVAD's sound signal in normal condition, the diagnosis system continuously monitored UPVAD's sound signal detected by the electro-stethoscope placed on the surface of the left thoracic cavity of the goat. The UPVAD was stopped by rupture of a diaphragm in the pump on the ninth day of operation. We were able to identify initial signs of malfunction of the pump on the eighth day, while the UPVAD was able to operate normally. In conclusion, the automatic diagnosis system for malfunction of the artificial heart has enough performance to detect early stages of malfunction of the artificial heart, and it contributes to ensure the patient's safety.
Assuntos
Ruídos Cardíacos , Coração Auxiliar , Falha de Prótese , Animais , Diagnóstico Precoce , CabrasRESUMO
The rotary undulation pump, which is composed of a disk with a convex shape on both sides and a pump housing with one narrow side and one wide side, is a unique continuous flow pump with a new principle. The concept of the levitation drive method for this pump was proposed. The electromagnetic driver model and drive circuit were developed to examine the possibility and the difference among the delta wired, Y wired, and repulsion methods. In the repulsion method, the disk was driven by magnetic repulsion. The model could be driven with either method, and the repulsion method was demonstrated to also be possible. With either method, owing to the wide gap between the permanent magnets and coils, the output was not enough when the load was high. The efficiency was almost the same in the delta wired and Y wired methods. In the repulsion method, however, it was less than 50% of that in the other two methods. From the results, the delta wired and Y wired methods with an active control of the gap distance were considered to be better than the repulsion method, which required no active gap control.
Assuntos
Coração Artificial , Centrifugação , Fenômenos Eletromagnéticos , HumanosRESUMO
This study has three purposes, as follows. The first is to develop a microscopic system to observe the microcirculation of animals implanted with an artificial heart. The second is to investigate the influence of flow pattern change from pulsatile to nonpulsatile on the microcirculation. The third is to study the effects of pulsatility in blood flow on endothelium-derived nitric oxide release in the microvasculature. When the flow pattern was changed from pulsatile to nonpulsatile, the velocity of erythrocytes in many capillaries dropped and remained at a low level, and the number of perfused capillaries decreased. After the flow pattern was returned to pulsatile, the velocity of erythrocytes recovered to the initial level. In many cases, the flow of nonperfused capillaries recovered to the initial level as well. Also, the pulsatile flow enhances the basal and flow-stimulated endothelium-derived nitric oxide release in microvessels.
Assuntos
Coração Artificial , Microcirculação/fisiologia , Óxido Nítrico/metabolismo , Fluxo Pulsátil/fisiologia , Animais , Feminino , Cabras , HemodinâmicaRESUMO
The undulation pump total artificial heart (UPTAH) is a small implantable total artificial heart. As the UPTAH generates outflow and inflow at the same time, control of the UPTAH is very difficult. Therefore suitable control methods specifically for the UPTAH should be established. Various motor control, left-right flow balance control, and physiological control methods were examined and tried for the UPTAH control in this study. The control system is divided into seven categories. It has a hierarchical structure and all control modes work at the same time. The UPTAH with the newly developed control method has been implanted into the chest cavities of 48 goats. Until now, six goats survived for more than one month, including 63 days in the longest case. The good condition of the UPTAH implanted animal could be maintained with the newly developed control scheme, consisting of the 1/R control and several other additional controls.
Assuntos
Sistema Cardiovascular/fisiopatologia , Cardiopatias/cirurgia , Coração Artificial/efeitos adversos , Complicações Pós-Operatórias , Desenho de Prótese , Implantação de Prótese/efeitos adversos , Animais , Modelos Animais de Doenças , Cabras , Cardiopatias/mortalidade , Cardiopatias/fisiopatologia , Hemodinâmica/fisiologia , Taxa de SobrevidaRESUMO
An undulation pump total artificial heart (UPTAH) in which the revolutions of the motor are converted to undulation motion of a disk has been developed. In an experiment, a goat using the UPTAH survived for 54 days. However, a large ripple was observed in the device's output pressure and flow waveform. In calculating the spectrum of the ripple, we found that the ripple mainly comprised 2 frequency sine waves: 1 having the same frequency as and 1 having double the frequency of the motor revolutions. To reduce the ripple, 2 sine waves, 1 having the same frequency as and 1 having double the frequency of the motor revolutions, were provided to the motor current to modulate the pulse width of the pulse width modulation controlling the motor revolutions. This ripple control method reduced the pressure ripple by 90% in a mock circulation and by 70% in animal experiments. These results revealed that the ripple generated in the UPTAH could be controlled through the use of motor control software.