Text-to-Microstructure Generation Using Generative Deep Learning.

Designing novel materials is greatly dependent on understanding the design principles, physical mechanisms, and modeling methods of material microstructures, requiring experienced designers with expertise and several rounds of trial and error. Although recent advances in deep generative networks have enabled the inverse design of material microstructures, most studies involve property-conditional generation and focus on a specific type of structure, resulting in limited generation diversity and poor human-computer interaction. In this study, a pioneering text-to-microstructure deep generative network (Txt2Microstruct-Net) is proposed that enables the generation of 3D material microstructures directly from text prompts without additional optimization procedures. The Txt2Microstruct-Net model is trained on a large microstructure-caption paired dataset that is extensible using the algorithms provided. Moreover, the model is sufficiently flexible to generate different geometric representations, such as voxels and point clouds. The model's performance is also demonstrated in the inverse design of material microstructures and metamaterials. It has promising potential for interactive microstructure design when associated with large language models and could be a user-friendly tool for material design and discovery.

Thermogravimetry-synchronized, reference-free quantitative mass spectrometry for accurate compositional analysis of polymer systems without prior knowledge of constituents.

Compositional analysis (CA)-identification and quantification of the system constituents-is the most fundamental and decisive approach for investigating the system of interest. Pyrolysis mass spectrometry (MS) with a high resolution of over 10 000 is very effective for chemical identification and is directly applicable to polymer materials regardless of their solubilities. However, it is less helpful for quantification, especially when the references, i.e., pure constituents, are unknown, non-isolable and thus cannot be prepared. To compensate for this weakness, herein we propose reference-free quantitative mass spectrometry (RQMS) with enhanced quantification accuracy assisted by synchronized thermogravimetry (TG). The key to success lies in correlating the instantaneous weight loss from TG with the MS signal, enabling the quantitative evaluation of the distinct ionization efficiency for each fragment individually. The determined ionization efficiencies allow the conversion of MS signal intensities of pyrolyzed fragments into weight abundances. In a benchmark test using ternary polymer systems, this new framework named TG-RQMS demonstrates accurate CA within ±1.3 wt% errors without using any prior knowledge or spectra of the references. This simple yet accurate and versatile CA method would be an invaluable tool to investigate polymer materials whose composition is hardly accessible via other analytical methods.

Decoding thermal properties in polymer-inorganic heat dissipators: a data-driven approach using pyrolysis mass spectrometry.

Polymeric materials can boost their performances by strategically incorporating inorganic substances. Heat dissipators are a representative class of such composite materials, where inorganic fillers and matrix polymers contribute to high thermal conductivity and strong adhesion, respectively, resulting in excellent heat dissipation performance. However, due to the complex interaction between fillers and polymers, even slight differences in structural parameters, e.g. dispersion/aggregation degree of fillers and crosslink density of polymers, may significantly impact material performance, complicating the quality management and guidelines for material developments. Therefore, we introduce pyrolysis mass spectra (MS) as material descriptors. On the basis of these spectra, we construct prediction models using a data-driven approach, specifically focusing on thermal conductivity and adhesion, which are key indicators for heat dissipating performance. Pyrolysis-MS observes thermally decomposable polymers, which occupy only 0.1 volume fraction of the heat dissipators; nevertheless, the physical states of non-decomposable inorganic fillers are implicitly reflected in the pyrolyzed fragment patterns of the matrix polymers. Consequently, pyrolysis-MS provides sufficient information to construct accurate models for predicting heat dissipation performance, simplifying quality management by substituting time-consuming performance evaluations with rapid pyrolysis-MS measurements. Furthermore, we elucidate that higher crosslinking density of the matrix polymers enhances thermal conductivity. This data-driven method promises to streamline the identification of key functional factors in complex composite materials.

Using pyrolysis-MS as a material descriptor allows for the prediction of composite materials' heat dissipation capabilities and the identification of key factors influencing these properties.

De-icing performance evolution with increasing hydrophobicity by regulating surface topography.

It is of great significance to grasp the role of surface topography in de-icing, which however remains unclear yet. Herein, four textured surfaces are developed by regulating surface topography while keeping surface chemistry and material constituents same. Specifically, nano-textures are maintained and micro-textures are gradually enlarged. The resultant ice adhesion strength is proportional to a topography parameter, i.e. areal fraction of the micro-textures, owing to the localized bonding strengthening, which is verified by ice detachment simulation using finite element method. Moreover, the decisive topography parameter is demonstrated to be determined by the interfacial strength distribution between ice and test surface. Such parameters vary from paper to paper due to different interfacial strength distributions corresponding to respective situations. Furthermore, since hydrophobic and de-icing performance may rely on different topography parameters, there is no certain relationship between hydrophobicity and de-icing.

The role of surface topography in de-icing is verified to be determined by the interfacial strength distribution between ice and surface experimentally and numerically, unveiling the relationship between hydrophobicity and de-icing.

Machine learning prediction of the mechanical properties of injection-molded polypropylene through X-ray diffraction analysis.

Predicting the mechanical properties of polymer materials using machine learning is essential for the design of next-generation of polymers. However, the strong relationship between the higher-order structure of polymers and their mechanical properties hinders the mechanical property predictions based on their primary structures. To incorporate information on higher-order structures into the prediction model, X-ray diffraction (XRD) can be used. This study proposes a strategy to generate appropriate descriptors from the XRD analysis of the injection-molded polypropylene samples, which were prepared under almost the same injection molding conditions. To this end, first, Bayesian spectral deconvolution is used to automatically create high-dimensional descriptors. Second, informative descriptors are selected to achieve highly accurate predictions by implementing the black-box optimization method using Ising machine. This approach was applied to custom-built polymer datasets containing data on homo- polypropylene and derived composite polymers with the addition of elastomers. Results show that reasonable accuracy of predictions for seven mechanical properties can be achieved using only XRD.

This study proposes a strategy to generate appropriate descriptors, which realize highly accurate predictions of mechanical properties via machine learning from the XRD analysis of the molded polypropylene samples.

Deep-learning-based inverse design of three-dimensional architected cellular materials with the target porosity and stiffness using voxelized Voronoi lattices.

Architected cellular materials are a class of artificial materials with cellular architecture-dependent properties. Typically, designing cellular architectures paves the way to generate architected cellular materials with specific properties. However, most previous studies have primarily focused on a forward design strategy, wherein a geometry is generated using computer-aided design modeling, and its properties are investigated experimentally or via simulations. In this study, we developed an inverse design framework for a disordered architected cellular material (Voronoi lattices) using deep learning. This inverse design framework is a three-dimensional conditional generative adversarial network (3D-CGAN) trained based on supervised learning using a dataset consisting of voxelized Voronoi lattices and their corresponding relative densities and Young's moduli. A well-trained 3D-CGAN adopts variational sampling to generate multiple distinct Voronoi lattices with the target relative density and Young's modulus. Consequently, the mechanical properties of the 3D-CGAN generated Voronoi lattices are validated through uniaxial compression tests and finite element simulations. The inverse design framework demonstrates potential for use in bone implants, where scaffold implants can be automatically generated with the target relative density and Young's modulus.

Evolution of and Disparity among Biomimetic Superhydrophobic Surfaces with Gecko, Petal, and Lotus Effect.

It is desirable to turn one kind of superhydrophobic (SHPO) surfaces into another by changing surface topography alone and attaining solid surfaces with tunable properties. Herein, gecko-, petal-, and lotus-like SHPO surfaces, composed of ZnO tetrapods and polydimethylsiloxane, are realized by adjusting the roughness factor and length scale of roughness, while keeping the surface chemistry the same. Afterward, water droplet sliding and impacting are investigated. The surfaces behave similarly in spreading but deviate from each other in sliding, receding, jetting, and rebounding due to their different adhesive properties. Moreover, the disparity between surfaces with petal and lotus effects is well explained by Furmidge's and Young-Dupre equations. On the other hand, these formulas fail to elucidate the surface with gecko effect because of its inside sealed air that produces negative pressure upon droplet motion. This paper provides a facile topography evolution path and a manifest correlation between topography and performance in water droplet dynamics for SHPO surfaces with gecko, petal, and lotus effects.

Light-Induced Topological Patterning toward 3D Shape-Reconfigurable Origami.

Shape-reconfigurable materials are crucial in many engineering applications. However, because of their isotropic deformability, they often require complex molding equipment for shaping. A polymeric origami structure that follows predetermined deformed and non-deformed patterns at specific temperatures without molding is demonstrated. It is constructed with a heterogeneous (dynamic and static) network topology via light-induced programming. The corresponding spatio-selective thermal plasticity creates varied deformability within a single polymer. The kinematics of site-specific deformation allows guided origami deployment in response to external forces. Moreover, the self-locking origami can fix its geometry in specific states without pressurization. These features enable the development of shape-reconfigurable structures that undergo on-demand geometry changes without requiring bulky or heavy equipment. The concept enriches polymer origamis, and could be applied with other polymers having similar chemistries. Overall, it is a versatile material for artificial muscles, origami robotics, and non-volatile mechanical memory devices.

Understanding the evolution of a de novo molecule generator via characteristic functional group monitoring.

Recently, artificial intelligence (AI)-enabled de novo molecular generators (DNMGs) have automated molecular design based on data-driven or simulation-based property estimates. In some domains like the game of Go where AI surpassed human intelligence, humans are trying to learn from AI about the best strategy of the game. To understand DNMG's strategy of molecule optimization, we propose an algorithm called characteristic functional group monitoring (CFGM). Given a time series of generated molecules, CFGM monitors statistically enriched functional groups in comparison to the training data. In the task of absorption wavelength maximization of pure organic molecules (consisting of H, C, N, and O), we successfully identified a strategic change from diketone and aniline derivatives to quinone derivatives. In addition, CFGM led us to a hypothesis that 1,2-quinone is an unconventional chromophore, which was verified with chemical synthesis. This study shows the possibility that human experts can learn from DNMGs to expand their ability to discover functional molecules.

Topological alternation from structurally adaptable to mechanically stable crosslinked polymer.

Stimuli-responsive polymers with complicated but controllable shape-morphing behaviors are critically desirable in several engineering fields. Among the various shape-morphing materials, cross-linked polymers with exchangeable bonds in dynamic network topology can undergo on-demand geometric change via solid-state plasticity while maintaining the advantageous properties of cross-linked polymers. However, these dynamic polymers are susceptible to creep deformation that results in their dimensional instability, a highly undesirable drawback that limits their service longevity and applications. Inspired by the natural ice strategy, which realizes creep reduction using crystal structure transformation, we evaluate a dynamic cross-linked polymer with tunable creep behavior through topological alternation. This alternation mechanism uses the thermally triggered disulfide-ene reaction to convert the network topology - from dynamic to static - in a polymerized bulk material. Thus, such a dynamic polymer can exhibit topological rearrangement for thermal plasticity at 130°C to resemble typical dynamic cross-linked polymers. Following the topological alternation at 180°C, the formation of a static topology reduces creep deformation by more than 85% in the same polymer. Owing to temperature-dependent selectivity, our cross-linked polymer exhibits a shape-morphing ability while enhancing its creep resistance for dimensional stability and service longevity after sequentially topological alternation. Our design enriches the design of dynamic covalent polymers, which potentially expands their utility in fabricating geometrically sophisticated multifunctional devices.