Avian Predators Avoid Attacking Fly-Mimicking Beetles: A Field Experiment on Evasive Mimicry Using Artificial Prey.

AbstractMany Neotropical beetles present coloration patterns mimicking red-eyed flies, which are presumably evasive mimicry models. However, the role of predators in selecting for evasive mimics in nature remains untested. In a field experiment, we used nontoxic plasticine replicas of a specialized fly-mimicking beetle species, which we placed on the host plants of the beetles. We show that replicas painted with reddish patches simulating the eyes of flesh flies experienced a much lower predation rate than control replicas. We found that beak marks were the most frequent signs of attack on plasticine replicas, underlining the potential selective pressure exerted by birds. Replicas that matched the size of the beetles suffered higher predation than smaller or larger replicas. The predation rate was also higher for beetle replicas exposed during the warm and wet season, when adult beetles occur. Our results support predator-mediated selection of mimic beetles, highlighting that reddish spots resembling flies' eyes comprise an important trait in reducing attack by avian predators.

Influence of the metal post material, tooth location in the dental arch, and metal artifact reduction tool on vertical root fracture diagnosis in cone beam CT.

This study aimed to evaluate the influence of the metal post composition, tooth location in the dental arch, and metal artifact reduction (MAR) on vertical root fracture (VRF) diagnosis in cone beam computed tomography (CBCT). Twenty-two unirradicular premolars (12 sound and 10 fractured) and two alveolar sockets of a mandible (anterior and posterior regions) composed the sample. CBCT scans of each tooth with a metal post placed into the root canal-silver-palladium (Ag-Pd), cobalt-chromium (Co-Cr), or nickel-chromium (Ni-Cr)-were individually acquired for each mandibular region, and two conditions of MAR, using a OP300 device (Instrumentarium, Finland). Images were assessed by five evaluators independently for VRF detection. Diagnostic values were calculated and compared among all groups using multi-way ANOVA with Tukey post hoc test to investigate the effect of post material, anatomical region, and MAR on VRF diagnosis (α = 0.05). Values of area under the receiver operating curve and specificity were not influenced by the studied factors (p > 0.05). Sensitivity was influenced by the MAR in both mandibular regions (p < 0.05). In the anterior region, sensitivity values increased when the MAR was enabled, regardless of the metal post material (p < 0.05). Similar behavior was noticed in the posterior region for Ni-Cr (p < 0.05) but not for Ag-Pd and Co-Cr posts (p > 0.05). The MAR improved the sensitivity in VRF diagnosis for all tested metal posts in the mandibular anterior region and for the Ni-Cr post in the mandibular posterior region. Therefore, for images obtained in the OP300 CBCT device, activation of the MAR is suggested in these cases.

Influence of the palatal plane cant and skeletal patterns in the hard palate thickness?

INTRODUCTION: The aim of the present study was to evaluate the thickness of the hard palate at the different angles formed by the palatal plane and the Frankfort horizontal line using computed tomography in patients with different facial patterns for planning the installation of MARPE. MATERIALS AND METHODS: The measurements were analysed in the hard palate of 106 patients. Four regions were selected passing through the mesial face, tangent at the level of the cemento-enamel junction of the premolars and molars. The bone thickness was measured from the floor of the nasal cavity to the cortical bone of the hard palate, 02 measurements with a distance of 05 mm between them (2.5 mm on each side starting from the midsagittal line) and 2 more with a distance of 7 mm between measurements (3.5 mm on each side starting from the midsagittal line). The palatal plane cant was determined based on the palatal plane and the Frankfort horizontal plane. The sagittal skeletal pattern was determined based on the ANB angle and the vertical skeletal pattern based on the SN.Go.Gn angle. RESULTS: Palatal bone thickness was greater in males than in females. Regarding the sagittal skeletal pattern, patients with Class II were found to have a thinner hard palate than Class I and Class III patients. No difference in the vertical skeletal pattern was observed between groups. Regarding the palatal plane cant, bone thickness was greater in patients with clockwise rotation. CONCLUSIONS: Careful planning should be considered in the case of female patients; patients with greater angles of the palatal plane cant and Class II patients have a smaller bone thickness.

Anatomical study of the maxillary sinus: which characteristics can influence its volume?

PURPOSE: To investigate whether there is a relationship between the volume of the maxillary sinus and individual parameters such as gender, side, posterior tooth absence, sinus membrane thickening, bony septa, vertical and sagittal skeletal patterns. METHODS: The tomographic volume of the maxillary sinus from 211 individuals (422 sides) was evaluated using Horos DICOM Viewer Software. Bony septa and sinus membrane thickening were classified as absent or present. At the same time, loss of one or more teeth in the posterior region of the maxilla (except for the third molars) was considered. The t test was applied to analyze maxillary sinus volume according to gender, age, side, posterior tooth absence, sinus membrane thickening and bony septa. A one-way analysis of variance (ANOVA) with Tukey's post-hoc test was applied to compare sagittal and vertical patterns. Pearson's correlation coefficient was also used to verify the association between maxillary sinus volume, age and skeletal patterns. RESULTS: Concerning the sagittal skeletal pattern, a statistically significant difference was observed between Classes II and III (p = 0.05) and it was confirmed by the Pearson's correlation coefficient (r = - 0.107/p = 0.029). No statistically significant differences were observed between the maxillary sinus volume according to gender (p = 0.06), side (p = 0.37), posterior tooth absence (p = 0.92), sinus membrane thickening (p = 0.47), bony septa (0.89) and vertical skeletal pattern (p = 0.67). No significant differences were observed with age (r = - 0.076/p = 0.109) and the vertical skeletal pattern (r = - 0.078/p = 0.108). CONCLUSION: Maxillary sinus volume was influenced by the sagittal skeletal pattern and was higher in Class III individuals.

Global trends in the trophic specialisation of flower-visitor networks are explained by current and historical climate.

Trophic specialisation is known to vary across space, but the environmental factors explaining such variation remain elusive. Here we used a global dataset of flower-visitor networks to evaluate how trophic specialisation varies between latitudinal zones (tropical and temperate) and across elevation gradients, while considering the environmental variation inherent in these spatial gradients. Specifically, we assessed the role of current (i.e., net primary productivity, temperature, and precipitation) and historical (i.e., temperature and precipitation stability) environmental factors in structuring the trophic specialisation of floral visitors. Spatial variations in trophic specialisation were not explained by latitudinal zones or elevation. Moreover, regardless of network location on the spatial gradient, there was a tendency for higher trophic specialisation in sites with high productivity and precipitation, whereas historical temperature stability was related to lower trophic specialisation. We highlight that both energetic constraints in animal foraging imposed by climate and resource availability may drive the global variation in trophic specialisation.

A neotropical mistletoe influences herbivory of its host plant by driving changes in the associated insect community.

Parasitic plants are important sources of stress and can strongly impact their host plants through direct and indirect associations with other herbivores and their associated organisms. In the tropics, mistletoes are frequent parasitic plants, influencing different trophic levels involved with the host plant. Here, we investigated the direct and indirect influences of multiple partners involved in interactions between the mistletoe Psittachantus robustus and its host tree, Vochysia thyrsoidea. More specifically, we assessed if the presence of the mistletoe modified herbivory levels of its host by altering the diversity of associated insects. We found that insect feeding guild modulated mistletoe influence on insect community, and there were fewer species and individuals of leaf-chewing insects in parasitized than non-parasitized trees. Despite this decrease in leaf-chewing insects, there were increased levels of herbivory in parasitized plants. Mistletoes' presence did not influence the hemipteran sap-sucking insects, but this herbivore guild directly responded to the abundance of their associated ants. Overall, our study found empirical support for the crucial role of mistletoes on their host-associated organisms, ultimately shaping the herbivory levels of their tree hosts. By exposing the distinct effects of the different partners involved, our results shed light on the intricated interactions mediated by parasitic plants, opening the path for new investigations.

Tomographic assessment of infrazygomatic crest bone depth for extra-alveolar miniscrew insertion in subjects with different vertical and sagittal skeletal patterns.

OBJECTIVE: To evaluate bone availability at the infrazygomatic crest for extra-alveolar bone miniscrew insertion in subjects with different vertical and sagittal skeletal patterns. SETTING AND SAMPLE POPULATION: Measurements of the infrazygomatic crest were performed on multislice computed tomography scans from 58 adults with different skeletal patterns. MATERIALS AND METHODS: Infrazygomatic crest bone depth was measured at 4, 5 and 6 mm from the cementoenamel junction (CEJ) of the maxillary first molar at three different angles (60°, 70° and 80°) in the first molar occlusal plane. The sagittal and vertical skeletal patterns were determined. Analysis of variance followed by Tukey's post hoc test was used (P ≤ .05). RESULTS: Bone depth was greater near the CEJ (8.7 ± 3.1 mm) and lower in the apical area (5.8 ± 2.7 mm). In Class II subjects, considering 6 mm from the CEJ, there was a significantly lower depth at the 80° angle (5.4 ± 2.5 mm) than at 60° (8.6 ± 3.5 mm; P = .007). In mesofacial subjects, considering 5 and 6 mm from the CEJ, bone depth was lower at 80° (5.7 ± 3.2 mm and 5.3 ± 2.5 mm) than at 60° considering 4 mm from the CEJ (P ≤ .019). CONCLUSION: Bone availability was lower at the apical level, especially in Class II and mesofacial subjects. Therefore, when the planned insertion site is located in the apical direction, it is recommended to choose shorter miniscrews (2.0 x 12mm) and a smaller insertion angle (60°) and/or to plan a miniscrew bone insertion deep enough to allow bicortical fixation.

Assessment of the mandibular buccal shelf for orthodontic anchorage: Influence of side, gender and skeletal patterns.

OBJECTIVES: To evaluate bone height and thickness in the mandibular buccal shelf region and to compare differences between anatomical sites according to gender, side and vertical and sagittal skeletal patterns. SETTINGS AND SAMPLE POPULATION: Multislice computed tomography (MSCT) images of 94 subjects (51 females and 43 males) were previously obtained as part of preoperative planning for orthognathic surgery. METHODS: Measurements were performed in three different regions of the mandibular buccal shelf: mesially, towards the central groove and distally to the second molars. Bone thickness measurements were obtained perpendicularly 3, 5 and 7 mm below the bone crest towards the mandible outer cortex. Bone height was measured 3 mm away from the bone crest perpendicularly to the outer cortex of the base of mandible. RESULTS: There was an increase in bone thickness in the posterior and basal directions. The increase in bone thickness ranged from 1.8 to 7.1 mm. Greater bone height was found in the anterior direction. The increase in bone height ranged from 17.5 to 22.5 mm. Hypodivergent and Class III subjects showed significantly greater bone thickness (P < .05). Significantly greater bone height was found mesially to the second molar in Class III subjects compared with Class I subjects (P < .05) and in hyperdivergent males compared with hypodivergent males (P < .05). CONCLUSIONS: The region distal to the second molar is the most appropriate for the insertion of extra-alveolar mini-screws in terms of bone thickness. Hypodivergent and Class III subjects showed greater bone thickness in the mandibular buccal shelf region.

Mapping the expression of beam hardening artefacts produced by metal posts positioned in different regions of the dental arch.

OBJECTIVES: To objectively assess the expression and direction of artefacts in the vicinity of metal posts positioned in different mandibular regions. MATERIALS AND METHODS: A human mandible had two sockets prepared-anterior and posterior regions-to accommodate a single-rooted tooth. Two CBCT units, Picasso Trio and OP300, were used. CBCT images of the tooth without metal post, and with silver-palladium, nickel-chromium, or cobalt-chromium posts (experimental groups) were individually acquired. Then, 8 lines of interest (LOIs) were determined around the root canal, in an axial reconstruction: 4 in orthogonal (buccal, lingual, mesial, and distal) directions, and 4 in oblique (mesiobuccal, distobuccal, mesiolingual, and distolingual) directions. The mean of gray values was measured for each LOI. RESULTS: For the OP300, in general, all experimental groups showed greater expression of hyperdense streaks in orthogonal LOIs and greater expression of hypodense streaks in oblique LOIs. For the Picasso Trio, for both mandibular regions, the buccal LOI showed greater expression of hypodense streaks; conversely, greater expression of hyperdense streaks was observed in the distal and distobuccal LOIs in the anterior region and in the mesiolingual LOI in the posterior region. The silver-palladium group showed significantly greater expression of beam hardening artefacts in the posterior region of the mandible, regardless of the CBCT unit (p < 0.05). The mandibular posterior region showed significantly lower gray values than the anterior region (p < 0.05). CONCLUSION: The expression and direction of artefacts produced in the vicinity of metal posts vary according to the mandibular region, composition of the post, and CBCT unit. CLINICAL RELEVANCE: The mapping of artefacts produced by metal posts reveals the root regions with greater expression of hypodense and hyperdense artefacts, which may contribute to recognizing regions more likely to mimic or hide root fracture lines.

Efficacy of digital radiography for detecting a second mesiobuccal canal adjacent to unfilled or filled canals.

The aim of this study was to assess the diagnostic accuracy of digital periapical radiography for the detection of the second mesiobuccal (MB2) canal when the adjacent canals are unfilled or filled with gutta percha. Forty human maxillary first molars were selected, 20 of which had an MB2 canal. The presence or absence of the MB2 canal was confirmed using microcomputed tomography. Digital periapical radiographs of each tooth were obtained from 3 horizontal angles before and after the adjacent root canals were filled with gutta percha. Three experienced oral radiologists evaluated all images and indicated the presence or absence of the MB2 canal using a confidence scale of 5 points. To assess intraobserver and interobserver agreement, weighted kappa coefficients were calculated. The diagnostic test (sensitivity, specificity, and accuracy) and area under the receiver operating characteristic curve (Az) values were calculated and compared between groups (n = 40): radiographs of the first molars with unfilled adjacent canals and radiographs of the same teeth with filled adjacent canals. For all observers, intraobserver reproducibility ranged from substantial (0.70) to almost perfect (0.86), and interobserver reproducibility ranged from fair (0.39) to substantial (0.67). Similar values of specificity and Az for the detection of the MB2 canal were observed with unfilled and filled adjacent canals. The sensitivity and accuracy were slightly greater when the adjacent root canals were filled with gutta percha. Detection of the MB2 canal on digital periapical radiographs can be challenging even when obtained at varying horizontal angles, and the presence of gutta percha does not influence the detection.

Species-level drivers of mammalian ectoparasite faunas.

Traditionally, most studies have described the organization of host-parasite interaction networks by considering only few host groups at limited geographical extents. However, host-parasite relationships are merged within different taxonomic groups and factors shaping these interactions likely differ between host and parasite groups, making group-level differences important to better understand the ecological and evolutionary dynamics of these interactive communities. Here we used a dataset of 629 ectoparasite species and 251 species of terrestrial mammals, comprising 10 orders distributed across the Nearctic and Neotropical regions of Mexico to assess the species-level drivers of mammalian ectoparasite faunas. Specifically, we evaluated whether body weight, geographical range size and within-range mammal species richness (i.e. diversity field) predict mammal ectoparasite species richness (i.e. degree centrality) and their closeness centrality within the mammal-ectoparasite network. In addition, we also tested if the observed patterns differ among mammal orders and if taxonomic closely related host mammals could more likely share the same set of ectoparasites. We found that ectoparasite species richness of small mammals (mainly rodents) with large proportional range sizes was high compared to large-bodied mammals, whereas the diversity field of mammals had no predictive value (except for bats). We also observed that taxonomic proximity was a main determinant of the probability to share ectoparasite species. Specifically, the probability to share ectoparasites in congeneric species reached up to 90% and decreased exponentially as the taxonomic distance increased. Further, we also detected that some ectoparasites are generalists and capable to infect mammalian species across different orders and that rodents have a remarkable role in the network structure, being closely connected to many other taxa. Hence, because many rodent species have synanthropic habits they could act as undesired reservoirs of disease agents for humans and urban animals. Considering the reported worldwide phenomenon of the proliferation of rodents accompanying the demographic decrease or even local extinction of large-bodied mammal species, these organisms may already be an increasing health threat in many regions of the world.

Ant removal distance, but not seed manipulation and deposition site increases the establishment of a myrmecochorous plant.

Myrmecochory (seed dispersal by ants) is a unique seed dispersal syndrome among invertebrates. It comprises three main phases: seed removal, seed manipulation, and seed deposition. However, the contribution of each phase to seed and seedling fate remains unclear. Here, we experimentally quantified the effects of each phase of myrmecochory on seed germination and seedling establishment, the two most critical life history stages involved in plant recruitment. We established 30 sample points, and each included an adult Mabea fistulifera tree, an Atta sexdens nest entrance, and six seed depots. We monitored the germination of M. fistulifera seeds for 3 months and subsequently followed the growth and mortality of the resulting seedlings for 12 months. Only the dispersal distance influenced plant establishment, reducing seed germination and increasing seedling growth, but with no effect of seed manipulation and deposition site. Despite the contrasting effects of distance on seed germination and seedling growth, the positive effect of dispersal distance on seedling growth was ten times greater than the negative effect on seed germination. Moreover, A. sexdens behaved neither as granivore nor as herbivore of M. fistulifera seeds or seedlings, which suggests that seed dispersal by A. sexdens is advantageous to M. fistulifera. Thus, the joint occurrence of these two species in disturbed areas could have a positive effect on this pioneer plant population, which might promote forest regeneration.

Ant species richness and interactions in canopies of two distinct successional stages in a tropical dry forest.

Canopy ecology is a fast-growing field, but still a scientific frontier in many ecological aspects. For instance, the hypothesis that tree traits shape patterns in ant-plant interactions lacks data, notably for tropical canopies in different successional stages. In this study, we investigated canopy traits, such as tree height, the presence of extrafloral nectaries (EFNs), connectivity among tree crowns, and successional stage, structure ant-tree interactions in a tropical dry forest (TDF), examining whether these are the determinant factors for ant species richness. We collected ants on trees in early and late successional stages over 2 years, in rainy and dry seasons. In the late successional stage, ant species richness was greater in the taller trees; in the early successional stage, the smallest trees had a greater ant species richness than the taller trees. The EFNs and connectivity among treetops had no effect on ant species richness. We obtained a tree-ant network of the early successional stage, involving 786 interactions among 57 ant species and 75 trees; in the late successional stage, the network had 914 interactions among 60 ant species and 75 trees. There were 27 species of trees in our study, 11 of which (40.7% of all individual trees) had EFNs. The ant-plant interactions were not randomly distributed, suggesting that various biotic factors structured the ant assemblies. This study presents new insights into ant-tree interactions, showing that both tree height and successional stage influence the occurrence of many species of ants in tree canopies of tropical dry forests.

How Does Dung Beetle (Coleoptera: Scarabaeidae) Diversity Vary Along a Rainy Season in a Tropical Dry Forest?

Dung beetle community dynamics are determined by regional rainfall patterns. However, little is known about the temporal dynamics of these communities in tropical dry forests (TDFs). This study was designed to test the following predictions: 1) Peak diversity of dung beetle species occurs early in the wet season, with a decrease in diversity (α and ß) and abundance throughout the season; 2) Nestedness is the primary process determining ß-diversity, with species sampled in the middle and the end of the wet season representing subsets of the early wet season community. Dung beetles were collected in a TDF in the northern Minas Gerais state, Brazil over three sampling events (December 2009, February and April 2010). We sampled 2,018 dung beetles belonging to 39 species and distributed among 15 genera. Scarabaeinae α-diversity and abundance were highest in December and equivalent between February and April, while ß-diversity among plots increased along the wet season. The importance of nestedness and species turnover varies between pairs of sample periods as the main process of temporal ß-diversity. Most species collected in the middle and end of the wet season were found in greater abundance in early wet season. Thus, the dung beetle community becomes more homogeneous at the beginning of the wet season, and as the season advances, higher resource scarcity limits population size, which likely results in a smaller foraging range, increasing ß-diversity. Our results demonstrate high synchronism between the dung beetle life cycle and seasonality of environmental conditions throughout the wet season in a TDF, where the onset of rains determines adult emergence for most species.

Spatio-Temporal Distribution of Bark and Ambrosia Beetles in a Brazilian Tropical Dry Forest.

Bark and the ambrosia beetles dig into host plants and live most of their lives in concealed tunnels. We assessed beetle community dynamics in tropical dry forest sites in early, intermediate, and late successional stages, evaluating the influence of resource availability and seasonal variations in guild structure. We collected a total of 763 beetles from 23 species, including 14 bark beetle species, and 9 ambrosia beetle species. Local richness of bark and ambrosia beetles was estimated at 31 species. Bark and ambrosia composition was similar over the successional stages gradient, and beta diversity among sites was primarily determined by species turnover, mainly in the bark beetle community. Bark beetle richness and abundance were higher at intermediate stages; availability of wood was the main spatial mechanism. Climate factors were effectively non-seasonal. Ambrosia beetles were not influenced by successional stages, however the increase in wood resulted in increased abundance. We found higher richness at the end of the dry and wet seasons, and abundance increased with air moisture and decreased with higher temperatures and greater rainfall. In summary, bark beetle species accumulation was higher at sites with better wood production, while the needs of fungi (host and air moisture), resulted in a favorable conditions for species accumulation of ambrosia. The overall biological pattern among guilds differed from tropical rain forests, showing patterns similar to dry forest areas.

Effects of habitat management on different feeding guilds of herbivorous insects in cacao agroforestry systems.

Human pressure on natural habitats increases the importance of agroforests for biodiversity conservation. The objective of this study was to evaluate the role of cacao traditional cultivation system (CTCS) on the conservation of the herbivorous insect community when compared with a monodominant rubber agroforest, a type of agricultural system for cacao cultivation. The insects were sampled in three habitats in Southeastern Bahia, Brazil: native forests, CTCS and rubber agroforests. In each habitat, 18 plots of 10 m2 were established, and the structural measures were collected and herbivorous insects were sampled with a Malaise/window trap. The diversity of folivorous decreased with the simplification of vegetation structure, but species composition was similar among habitats. In addition to a decrease in the availability of resources in monodominant rubber agroforests, the latex present in these systems have limited the occurrence of species that cannot circumvent latex toxicity. The diversity of sap-sucking insects was similar among habitats, but species composition was similar only in the CTCS and native forest, and it was different in the rubber agroforest. We observed turnover and a higher frequency of individuals of the family Psyllidae in the rubber agroforest. The biology and behavior of Psyllids and absence of natural enemies enable their diversity to increase when they are adapted to a new host. We observed a shift in the composition of xylophagous insects in the rubber agroforest compared to that in other habitats. Moreover, this agroforest has low species richness, but high individual abundance. Latex extraction is likely an important additional source of volatile compounds discharged into the environment, and it increases the attraction and recruitment of coleoborers to these sites. We concluded that CTCS has an herbivorous insect community with a structure similar to the community found in native forests of the region, and they present a more interesting conservation strategy when compared to rubber agroforests. We also emphasized the potential risk of local pest outbreaks in rubber agroforests for both the rubber and associated cacao trees.

Influence of scan mode (180°/360°) of the cone beam computed tomography for preoperative dental implant measurements.

OBJECTIVE: The aim of this study was to evaluate the effect of scan mode of the cone beam computed tomography (CBCT) in the preoperative dental implant measurements. MATERIAL AND METHODS: Completely edentulous mandibles with entirely resorbed alveolar processes were selected for this study. Five regions were selected (incisor, canine, premolar, first molar, and second molar). The mandibles were scanned with Next Generation i-CAT CBCT unit (Imaging Sciences International, Inc, Hatfield, PA, USA) with half (180°) and full (360°) mode. Two oral radiologists performed vertical measurements in all selected regions; the measurements of half of the sample were repeated within an interval of 30 days. The mandibles were sectioned using an electrical saw in all evaluated regions to obtain the gold standard. The intraclass correlation coefficient was calculated for the intra- and interobserver agreement. Descriptive statistics were calculated as mean, median, and standard deviation. Wilcoxon signed rank test was used to determine the correlation between the measurements obtained in different scan mode with the gold standard. The significance level was 5%. RESULTS: The values of intra- and interobserver reproducibility indicated a strong agreement. In the dental implant measurements, except the bone height of the second molar region in full scan mode (P = 0.02), the Wilcoxon signed rank test did not show statistical significant difference with the gold standard (P > 0.05). CONCLUSIONS: Both modes provided real measures, necessary when performing implant planning; however, half scan mode uses smaller doses, following the principle of effectiveness. We believe that this method should be used because of the best dose-effect relationship and offer less risk to the patient.

External root resorption of the second molar associated with third molar impaction: comparison of panoramic radiography and cone beam computed tomography.

PURPOSE: The aim of the present study was to compare panoramic radiography and cone beam computed tomography (CBCT) for the assessment of external root resorption (ERR) of second molars associated with impacted third molars. In addition, the prevalence of ERR in second molars and the inclinations of the third molars more associated with ERR were investigated in both imaging methods. MATERIALS AND METHODS: The sample consisted of 66 individuals with maxillary and mandibular impacted third molars (n = 188) seen on panoramic radiographs and CBCT images. The presence of ERR on the adjacent second molar was investigated, and the position of the third molar was determined using Winter's classification (vertical, horizontal, mesioangular, distoangular, and transverse). Statistical analysis was performed using the χ(2) test, Fisher exact test, and 2-proportion Z test (the significance level was set at 5%). RESULTS: A significantly greater number of cases of ERR (P < .0001) was diagnosed from CBCT images (n = 43, 22.88%) than panoramic radiographs (n = 10, 5.31%). The agreement between the panoramic radiographs and CBCT scans for diagnosing ERR was 4.3%. Mandibular third molars in mesioangular and horizontal inclinations were more likely to cause resorption of the adjacent teeth. CONCLUSIONS: CBCT should be indicated for the diagnosis of ERR in second molars when direct contact between the mandibular second and third molars has been observed on panoramic radiographs, especially in mesioangular or horizontal impactions. Furthermore, considering the propensity of these teeth to cause ERR in second molars, third molar prophylactic extraction could be suggested.

Concrescence: assessment of case by periapical radiography, cone beam computed tomography and micro-computed tomography.

The aim of this article was to describe imaging aspects of concrescence analyzed by three imaging modalities. A second molar joined together with a third molar was imaged using digital periapical radiography, cone beam computed tomography (CBCT) and micro-computed tomography (Micro-CT). On periapical radiograph, the mesial root of the third molar is superimposed on the distal root of the second molar. On CBCT images, a large cementum union between bulbous roots was detected, confirming the diagnosis of concrescence. On micro-CT images, the cementum union appeared limited to the apical third of the roots. In conclusion, both computed tomography modalities allowed for the diagnosis of concrescence. However, only micro-CT provided the real extension of the cementum union.

Scavenging in two mountain ecosystems: Distinctive contribution of ants in grassland and non-ant invertebrates in forest.

Scavenging is a key process for the cycling of nutrients in ecosystems, yet it is still neglected in the ecological literature. Apart from the importance of specific groups of animals in scavenging, there have been few ecological studies that compare them. Furthermore, the ecological studies on scavenging have mainly focused on vertebrates despite the crucial importance of invertebrates in this process. Here, we performed a large-scale ant suppression and vertebrate exclusion experiment to quantify the relative contribution of ants, non-ant invertebrates and vertebrates in scavenging nitrogen-rich (insect carcasses) and carbon-rich (seeds) baits in two contrasting mountainous habitats in Brazil (grasslands and forests). Overall, bait removal was 23.2% higher in forests than in grasslands. Ants were the primary scavengers in grasslands, responsible for more than 57% of dead insect larvae and seed removal, while, in forests, non-ant invertebrates dominated, removing nearly 65% of all baits. Vertebrates had a minor role in scavenging dead insect larvae and seeds in both habitats, with <4% of removals. Furthermore, our results show that animal-based baits were more consumed in forests than seeds, and both resources were equally consumed in grasslands. Therefore, we demonstrate the superiority of invertebrates in this process, with a particular emphasis on the irreplaceable role of ants, especially in this grassland ecosystem. As such, we further advance our knowledge of a key ecosystem process, showing the relative importance of three major groups in scavenging and the differences in ecosystems functioning between two contrasting tropical habitats.