RESUMO
Rechargeable sodium-oxygen (Na-O2) battery is deemed as a promising high-energy storage device due to the abundant sodium resources and high theoretical energy density (1,108 Wh kg-1). A series of quasisolid electrolytes are constantly being designed to restrain the dendrites growth, the volatile and leaking risks of liquid electrolytes due to the open system of Na-O2 batteries. However, the ticklish problem about low operating current density for quasisolid electrolytes still hasn't been conquered. Herein, we report a rechargeable Na-O2 battery with polyvinylidene fluoride-hexafluoropropylene recombination Nafion (PVDF-HFP@Nafion) based quasisolid polymer electrolyte (QPE) and MXene-based Na anode with gradient sodiophilic structure (M-GSS/Na). QPE displays good flame resistance, locking liquid and hydrophobic properties. The introduction of Nafion can lead to a high Na+ migration number (tNa+ = 0.68) by blocking the motion of anion and promote the formation of NaF-rich solid electrolyte interphase, resulting in excellent cycling stability at relatively high current density under quasisolid environment. In the meantime, the M-GSS/Na anode exhibits excellent dendrite inhibition ability and cycling stability. Therefore, with the synergistic effect of QPE and M-GSS/Na, constructed Na-O2 batteries run more stably and exhibit a low potential gap (0.166 V) after an initial 80 cycles at 1,000 mA g-1 and 1,000 mAh g-1. This work provides the reference basis for building quasisolid state Na-O2 batteries with long-term cycling stability.
RESUMO
ConspectusLithium-ion batteries (LIBs) have achieved great success and dominated the market of portable electronics and electric vehicles owing to their high energy density and long-term cyclability. However, if applying LIBs for large-scale energy storage scenarios, such as regulating the output of electricity generated by sustainable energy in the future age of carbon neutrality, the current electrochemistry of LIBs based on Li-ion interaction/deinteraction between a transition-metal oxide cathode and graphite anode will suffer from problems of scarce natural resources (e.g., Li, Co, and Ni) and high energy consumption/CO2 emission involved in the production of electrodes. Similarly, other commercial batteries such as lead-acid batteries and nickel-metal hydride batteries are also plagued by these issues.In contrast, organic electrode materials, especially carbonyl materials, exhibit advantages of abundant resources, renewability, high capacity, environmental friendliness, and structural designability and have shown great promise for various rechargeable batteries in recent years. However, organic carbonyl electrode materials generally exhibit unsatisfactory cycling stability and rate performance, which are highly dependent on the electrolyte and interfacial chemistry. Appropriate electrolytes and a stable electrode/electrolyte interface would be beneficial for preventing the dissolution of organic carbonyl electrode materials and/or their redox intermediates in electrolytes and promoting fast ion transport between the electrode and electrolyte. In this regard, designing an appropriate electrolyte and constructing a stable electrode/electrolyte interface are the keys to enhancing the comprehensive performance of organic carbonyl electrode materials.In this Account, on the basis of our progress and related works from other groups in the past decade, we afford an overview of understanding the effects of electrolyte and interfacial chemistry on the electrochemical performance of organic carbonyl electrode materials. We will start by briefly introducing the basic properties, working mechanisms, and issues of organic carbonyl electrode materials. Then, the implications of electrolyte and electrode/electrolyte interfacial chemistry on electrochemical performance will be summarized and highlighted through discussing the performance of organic carbonyl electrodes in different types of electrolytes (organic liquid and aqueous and solid-state electrolytes). Meanwhile, the design principles of electrolytes and interfacial chemistry for organic carbonyl electrodes are also discussed. A representative example is that organic carbonyl electrode materials often exhibit better electrochemical performance in ether-based electrolytes than in ester-based electrolytes, which could be mainly attributed to the stable and robust solid electrolyte interphase (SEI) formed on carbonyl electrodes in the ether-based electrolyte. This example demonstrates the importance of investigating the electrode/electrolyte interfacial chemistry of organic carbonyl electrode materials. Finally, future perspectives on designing appropriate electrolytes and understanding electrode/electrolyte interfacial chemistry will also be discussed. It is meaningful to thoroughly reveal the dynamic evolution of the electrode/electrolyte interface during discharge/charge processes and evaluate the compatibility between electrolytes and organic carbonyl electrode materials under practical conditions using limited quantities of electrolytes and high areal-specific-capacity electrodes in the future. This Account could attract more attention to electrolytes and the electrode/electrolyte interfacial chemistry of organic carbonyl electrode materials and finally promote their future commercial applications.
RESUMO
Rechargeable aqueous batteries are potential systems for large-scale energy storage due to their high safety and low cost. However, developing aqueous batteries with high sustainability, affordability, and reversibility is urgent and challenging. Here we report an amphoteric aluminum hydroxyacetate (AlAc(OH)2) electrolyte with the ability of bipolar ionization of H+ and OH-, which facilitates the redox reactions at both the anthraquinone (AQ) anode and nickel hydroxide (Ni(OH)2) cathode. The bipolar ionization ability of the AlAc(OH)2(H2O)3 solvation structure results from the strong polarization ability of Al3+ and OH-. The H+/OH- dissociation ability with a dissociation constant of 5.0/3.0 is stronger than that of water (14.0), which boosts the simultaneous stable redox reactions of electrodes. Specifically, H+ uptake prevents the AQ anode from the formation of an ionic bond, suppressing the electrode dissolution, whereas OH- provides the local alkaline environment for the stable conversion reaction of the Ni(OH)2 cathode. The AQ anode in the designed AQ||Ni(OH)2 battery delivers a discharge capacity of 243.9 mAh g-1 and a capacity retention of 78.2% after 300 cycles with high reversibility. Moreover, a pouch cell with a discharge capacity of 0.90 Ah was assembled, exhibiting an energy density of 44.7 Wh kg-1 based on the total mass of the battery. This work significantly widens the types of aqueous batteries and represents a design philosophy of bipolar electrolytes and distinct electrochemical reactions with H+ and OH-.
RESUMO
Aprotic lithium-oxygen (Li-O2) batteries have gained extensive interest in the past decade, but are plagued by slow reaction kinetics and induced large-voltage hysteresis. Herein, we use a plasmonic heterojunction of Au nanoparticle (NP)-decorated C3N4 with nitrogen vacancies (Au/NV-C3N4) as a bifunctional catalyst to promote oxygen cathode reactions of the visible light-responsive Li-O2 battery. The nitrogen vacancies on NV-C3N4 can adsorb and activate O2 molecules, which are subsequently converted to Li2O2 as the discharge product by photogenerated hot electrons from plasmonic Au NPs. While charging, the holes on Au NPs drive the reverse decomposition of Li2O2 with a reduced applied voltage. The discharge voltage of the Li-O2 battery with Au/NV-C3N4 is significantly raised to 3.16 V under illumination, exceeding its equilibrium voltage, and the decreased charge voltage of 3.26 V has good rate capability and cycle stability. This is ascribed to the plasmonic hot electrons on Au NPs pumped from the conduction bands of NV-C3N4 and the prolonged carrier life span of Au/NV-C3N4 This work highlights the vital role of plasmonic enhancement and sheds light on the design of semiconductors for visible light-mediated Li-O2 batteries and beyond.
RESUMO
Electrolytes that can ensure the movement of ions and regulate interfacial chemistries for fast mass and charge transfer are essential in many types of electrochemical energy storage devices. However, in the emerging energy-dense lithium-based batteries, the uncontrollable side-reactions and consumption of the electrolyte result in poor electrochemical performances and severe safety concerns. In this case, fluorination has been demonstrated to be one of the most effective strategies to overcome the above-mentioned issues without significantly contributing to engineering and technical difficulties. Herein, we present a comprehensive overview of the fluorinated solvents that can be employed in lithium-based batteries. Firstly, the basic parameters that dictate the properties of solvents/electrolytes are elaborated, including physical properties, solvation structure, interface chemistry, and safety. Specifically, we focus on the advances and scientific challenges associated with different solvents and the enhancement in their performance after fluorination. Secondly, we discuss the synthetic methods for new fluorinated solvents and their reaction mechanisms in depth. Thirdly, the progress, structure-performance relationship, and applications of fluorinated solvents are reviewed. Subsequently, we provide suggestions on the solvent selection for different battery chemistries. Finally, the existing challenges and further efforts on fluorinated solvents are summarized. The combination of advanced synthesis and characterization approaches with the assistance of machine learning will enable the design of new fluorinated solvents for advanced lithium-based batteries.
RESUMO
Oxygen reduction reaction (ORR) is the bottleneck of metal-air batteries and fuel cells. Strain regulation can change the geometry and adjust the surface charge distribution of catalysts, which is a powerful strategy to optimize the ORR activity. The introduction of controlled strain to the material is still difficult to achieve. Herein, we present a temperature-pressure-induced strategy to achieve the controlled lattice strain for metal coordination polymers. Through the systematic study of the strain effect on ORR performance, the relationship between geometric and electronic effects is further understood and confirmed. The strained Co-DABDT (DABDT=2,5-diaminobenzene-1,4-dithiol) with 2 % lattice compression exhibits a superior half-wave potential of 0.81â V. Theoretical analysis reveals that the lattice strain changes spin-charge densities around S atoms for Co-DABDT, and then regulates the hydrogen bond interaction with intermediates to promote the ORR catalytic process. This work helps to understand the catalytic mechanism from the atomic level.
RESUMO
Metal-organic frameworks (MOFs) are emerging as attractive electrode materials for lithium-ion batteries, owing to their fascinating features of sustainable resources, tunable chemical components, flexible molecular skeletons, and renewability. However, they are faced with a limited number of redox-active sites and unstable molecular frameworks during electrochemical processes. Herein, we design a novel two-dimensional (2D) iron(III)-tetraamino-benzoquinone (Fe-TABQ) with dual redox centers of Fe cations and TABQ ligands for high-capacity and stable lithium storage. It is constructed of square-planar Fe-N2O2 linkages and phenylenediamine building blocks, between which the Fe-TABQ chains are connected by multiple hydrogen bonds, and then featured as an extended π-d-conjugated 2D structure. The redox chemistry of both Fe3+ cations and TABQ anions is revealed to render its remarkable specific capacity of 251.1 mAh g-1. Benefiting from the intrinsic robust Fe-N(O) bonds and reinforced Li-N(O) bonds during cycling, Fe-TABQ delivers high capacity retentions over 95% after 200 cycles at various current densities. This work will enlighten more investigations for the molecular designs of advanced MOF-based electrode materials.
RESUMO
Sodium-ion batteries have garnered unprecedented attention as an electrochemical energy storage technology, but it remains challenging to design high-energy-density cathode materials with low structural strain during the dynamic (de)sodiation processes. Herein, we report a P2-layered lithium dual-site-substituted Na0.7Li0.03[Mg0.15Li0.07Mn0.75]O2 (NMLMO) cathode material, in which Li ions occupy both transition-metal (TM) and alkali-metal (AM) sites. The combination of theoretical calculations and experimental characterizations reveals that LiTM creates Na-O-Li electronic configurations to boost the capacity derived from the oxygen anionic redox, while LiAM serves as LiO6 prismatic pillars to stabilize the layered structure through suppressing the detrimental phase transitions. As a result, NMLMO delivers a high specific capacity of 266 mAh g-1 and simultaneously exhibits the nearly zero-strain characteristic within a wide voltage range of 1.5-4.6 V. Our findings highlight the effective way of dual-site substitution to break the capacity-stability trade-off in cathode materials for advanced rechargeable batteries.
RESUMO
Fast and selective Li+ transport in solid plays a key role for the development of high-performance solid-state electrolytes (SSEs) of lithium metal batteries. Porous compounds with tunable Li+ transport pathways are promising SSEs, but the comprehensive performances in terms of Li+ transport kinetics, electrochemical stability window, and interfacial compatibility are difficult to be achieved simultaneously. Herein, we report a porous coordination chain-based hydrogen-bonded framework (NKU-1000) containing arrayed electronegative sites for Li+ transport, exhibiting a superior Li+ conductivity of 1.13 × 10-3 S cm-1, a high Li+ transfer number of 0.87, and a wide electrochemical window of 5.0 V. The assembled solid-state battery with NKU-1000-based SSE shows a high discharge capacity with 94.4% retention after 500 cycles and can work over a wide temperature range without formation of lithium dendrites, which derives from the linear hopping sites that promote a uniformly high-rate Li+ flux and the flexible structure that can buffer the structural variation during Li+ transport.
RESUMO
Aqueous zinc batteries (AZBs) feature high safety and low cost, but intricate anodic side reactions and dendrite growth severely restrict their commercialization. Herein, ethylenediaminetetraacetic acid (EDTA) grafted metal organic framework (MOF-E) is proposed as a dually-functional anodic interphase for sustainable Zn anode. Specifically, the target-distributed EDTA serves as an ion-trapped tentacle to accelerate the desolvation and ionic transport by powerful chemical coordination, while the MOFs offer suitable ionic channels to induce oriented deposition. As a result, MOF-E interphase fundamentally suppresses side reactions and guides horizontally arranged Zn deposition with (002) preferred orientations. The Zn|MOF-E@Cu cell exhibits a markedly improved Coulombic efficiency of 99.7 % over 2500 cycles, and the MOF-E@Zn|KVOH (KV12 O30-y â nH2 O) cell yields a steady circulation of 5000 cycles@90.47 % at 8â A g-1 .
Assuntos
Estruturas Metalorgânicas , Zinco , Ácido Edético , Fontes de Energia Elétrica , Eletrodos , Transporte de ÍonsRESUMO
Despite carbonate electrolytes exhibiting good stability to sulfurized polyacrylonitrile (SPAN), their chemical incompatibility with lithium (Li) metal anode leads to poor electrochemical performance of Li||SPAN full cells. While the SPAN employs conventional ether electrolytes that suffer from the shuttle effect, leading to rapid capacity fading. Here, we tailor a dilute electrolyte based on a low solvating power ether solvent that is both compatible with SPAN and Li metal. Unlike conventional ether electrolytes, the weakly solvating ether electrolyte enables SPAN to undergo reversibly "solid-solid" conversion. It features an anion-rich solvation structure that allows for the formation of a robust cathode electrolyte interphase on the SPAN, effectively blocking the dissolution of polysulfides into the bulk electrolyte and avoiding the shuttle effect. What's more, the unique electrolyte chemistry endowed Li ions with fast electroplating kinetics and induced high reversibility Li deposition/stripping process from 25 °C to -40 °C. Based on tailored electrolyte, Li||SPAN full cells matched with high loading SPAN cathodes (≈3.6â mAh cm-2 ) and 50â µm Li foil can operate stably over a wide range of temperatures. Additionally, Li||SPAN pouch cell under lean electrolyte and 5 % excess Li conditions can continuously operate stably for over a month.
RESUMO
Non-aqueous Li-O2 batteries have aroused considerable attention because of their ultrahigh theoretical energy density, but they are severely hindered by slow cathode reaction kinetics and large overvoltages, which are closely associated with the discharge product of Li2O2. Herein, hexagonal conductive metal-organic framework nanowire arrays of nickel-hexaiminotriphenylene (Ni-HTP) with quadrilateral Ni-N4 units are synthesized to incorporate Ru atoms into its skeleton for NiRu-HTP. The atomically dispersed Ru-N4 sites manifest strong adsorption for the LiO2 intermediate owing to its tunable d-band center, leading to its high local concentration around NiRu-HTP. This favors the formation of film-like Li2O2 on NiRu-HTP with promoted electron transfer and ion diffusion across the cathode-electrolyte interface, facilitating its reversible decomposition during charge. These allow the Li-O2 battery with NiRu-HTP to deliver a remarkably reduced charge/discharge polarization of 0.76 V and excellent cyclability. This work will enrich the design philosophy of electrocatalysts for regulation of kinetic behaviors of oxygen redox.
RESUMO
Aqueous batteries are promising candidates for large-scale energy storage but face either limited energy density (lead-acid batteries), cost/resource concerns (Ni-MH batteries), or safety issues due to metal dendrite growth at high current densities (zinc batteries). We report that through designing electrochemical redox couples, quinones as intrinsic dendrite-free and sustainable anode materials demonstrate the theoretical energy density of 374 W h kg-1 coupling with affordable Mn2+/MnO2 redox reactions on the cathode side. Due to the fast K-ion diffusion in the electrolyte, low K-ion desolvation energy at the interface, and fast quinone/phenol reaction, the optimized poly(1,4-anthraquinone) in the KOH electrolyte shows specific capacities of 295 mA h g-1 at 300 C-rate and 225 mA h g-1 at 240 mA cm-2. Further constructed practical aqueous batteries exhibit an output voltage of 2 V in alkali-acid hybrid electrolyte systems with exceptional electrochemical kinetics, which can release/store over 95% of the theoretical capacity in less than 40 s (25 000 mA g-1). The scaled Ah level aqueous battery with the upgradation of interfacial chemistry on the electrode current collector exhibits an overall energy density of 92 W h kg-1, exceeding commercial aqueous lead-acid and Ni-MH batteries. The rapid response, intrinsic dendrite-free existence, and cost efficiency of quinone electrodes provide promising application interests for regulating the output of the electricity grid generated by intermittent solar and wind energy.
RESUMO
Rechargeable aqueous Zn metal batteries have become promising candidates for large-scale electrochemical energy storage owing to their high safety and affordable low cost. However, Zn metal anode suffers from dendritic growth and hydrogen evolution reaction (HER), deteriorating the electrochemical performance. Here, we demonstrate that these challenges can be conquered by introducing a halogen ion into the Zn2+ solvation structure. By designing an electrolyte composed of zinc acetate and ammonium halide, the electron-donating anion I- can coordinate with Zn2+ and transform the traditional Zn(H2O)62+ to ZnI(H2O)5+, in which I- could transfer electrons into H2O and thus suppress HER. The dynamic electrostatic shielding layer formed by concomitant NH4+ can restrict the dendritic growth. As a result, the halogenated electrolyte achieves a high initial coulombic efficiency (CE) of 99.3% in the Zn plating/stripping process and remains at an average of â¼99.8% with uniform Zn deposition. Moreover, Zn-I batteries are constructed by using dissociative I- as the cathode and carbon felt-polyaniline as the conductive and adsorptive layer, exhibiting an average CE of 98.6% without capacity decay after 300 cycles. This work provides insights into the halogenated Zn2+ solvation structure and offers a general electrolyte design strategy for achieving a highly reversible Zn metal anode and batteries.
RESUMO
The hydrophobic internal cavity and hydrophilic external surface of cyclodextrins (CDs) render promising electrochemical applications. Here, we report a comparative and mechanistic study on the use of CD molecules (α-, ß-, and γ-CD) as electrolyte additives for rechargeable Zn batteries. The addition of α-CD in aqueous ZnSO4 solution reduces nucleation overpotential and activation energy of Zn plating and suppresses H2 generation. Computational, spectroscopic, and electrochemical studies reveal that α-CD preferentially adsorbs in parallel on the Zn surface via secondary hydroxyl groups, suppressing water-induced side reactions of hydrogen evolution and hydroxide sulfate formation. Additionally, the hydrophilic exterior surface of α-CD with intense electron density simultaneously facilitates Zn2+ deposition and alleviates Zn dendrite formation. A formulated 3 M ZnSO4 + 10 mM α-CD electrolyte enables homogenous Zn plating/stripping (average Coulombic efficiency â¼ 99.90%) at 1 mA cm-2 in Zn|Cu cells and a considerable capacity retention of 84.20% after 800 cycles in Zn|V2O5 full batteries. This study provides insight into the use of supramolecular macrocycles to modulate and enhance the interface stability and kinetics of metallic anodes for aqueous battery chemistry.
Assuntos
Ciclodextrinas , Ciclodextrinas/química , Eletrodos , Cinética , Água , ZincoRESUMO
Aprotic Li-O2 batteries have attracted extensive attention in the past decade owing to their high theoretical energy density; however, they are obstructed by the sluggish reaction kinetics at the cathode and large voltage hysteresis. We regulate the spin state of partial Ni2+ metal centers (t2g 6 eg 2 ) of conductive nickel catecholate framework (NiII -NCF) nanowire arrays to high-valence Ni3+ (t2g 6 eg 1 ) for NiIII -NCF. The spin-state modulation enables enhanced nickel-oxygen covalency in NiIII -NCF, which facilitates electron exchange between the Ni sites and oxygen adsorbates and accelerates the oxygen redox kinetics. Upon discharging, the high affinity of Ni3+ sites with the intermediate LiO2 promotes formation of nanosheet-like Li2 O2 in the void space among NiIII -NCF nanowires. The Li-O2 battery based on NiIII -NCF offers remarkably reduced discharge/charge voltage gaps, superior rate capability, and a long cycling stability of over 200 cycles. This work highlights the importance of electron spin state on the redox kinetics and will provide insight into electronic structure regulation of electrocatalysts for Li-O2 batteries and beyond.
RESUMO
Li-O2 batteries have aroused considerable interest in recent years, however they are hindered by high kinetic barriers and large overvoltages at cathodes. Herein, a step-scheme (S-scheme) junction with hematite on carbon nitride (Fe2 O3 /C3 N4 ) is designed as a bifunctional catalyst to facilitate oxygen redox for a visible-light-involved Li-O2 battery. The internal electric field and interfacial Fe-N bonding in the heterojunction boost the separation and directional migration of photo-carriers to establish spatially isolated redox centers, at which the photoelectrons on C3 N4 and holes on Fe2 O3 remarkably accelerate the discharge and charge kinetics. These enable the Li-O2 battery with Fe2 O3 /C3 N4 to present an elevated discharge voltage of 3.13â V under illumination, higher than the equilibrium potential 2.96â V in the dark, and a charge voltage of 3.19â V, as well as superior rate capability and cycling stability. This work will shed light on rational cathode design for metal-O2 batteries.
RESUMO
For lithium (Li) metal batteries, the decrease in operating temperature brings severe safety issues by more disordered Li deposition. Here, we demonstrate that the solvating power of solvent is closely related to the reversibility of the Li deposition/stripping process under low-temperature conditions. The electrolyte with weakly solvating power solvent shows lower desolvation energy, allowing for a uniform Li deposition morphology, as well as a high deposition/stripping efficiency (97.87 % at -40 °C). Based on a weakly solvating electrolyte, we further built a full cell by coupling the Li metal anode with a sulfurized polyacrylonitrile electrode at a low anode-to-cathode capacity ratio for steady cycling at -40 °C. Our results clarified the relationship between solvating power of solvent and Li deposition behavior at low temperatures.
RESUMO
Quinone compounds, which are capable of accommodating proton (H+ ), are emerging electrodes in aqueous batteries. However, the storage mechanism of proton in quinone compounds is less known and the energy/power density of quinone-based proton battery is still limited. Here we design a series of quinone anodes and study their electrochemical properties in acidic electrolyte, in which tetramethylquinone (TMBQ) delivers a high capacity of 300â mAh g-1 with an extremely low polarization of 20â mV at 1â C, and maintains over 50 % theoretical capacity in less than 16â seconds. The fast kinetics of TMBQ is attributed to the continuous H+ migration channel, high H+ diffusion coefficient (10-6 â cm2 s-1 ), and low H+ migration energy barrier (0.26â eV). When coupling with MnO2 cathode, the battery shows a long lifespan of 4000â cycles with a capacity retention of 77 % at 5â C. This study reveals the proton transport in quinone-electrodes and offers new insights to design advanced aqueous batteries.
RESUMO
Cathode electrolyte interphases (CEIs) are critical to the cycling stability of high-voltage cathodes for batteries, yet their formation mechanism and properties remain elusive. Here we report that the compositions of CEIs are largely controlled by abundant species in the inner Helmholtz layer (IHL) and can be tuned from material aspects. The IHL of LiCoO2 (LCO) was found to alter after charging, with a solvent-rich environment that results in fragile organic-rich CEIs. By passivated spinel Li4 Mn5 O12 coating, we achieve an anion-rich IHL after charging, thus enabling robust LiF-rich CEIs. In situ microscopy reveals that LiF-rich CEIs maintain mechanical integrity at 500 °C, in sharp contrast to organic-rich CEIs which undergo severe expansion and subsequent voids/cracks in the cathode. As a result, the spinel-coated LCO exhibits a high specific capacity of 194â mAh g-1 at 0.05â C and a capacity retention of 83 % after 300â cycles at 0.5â C. Our work sheds new light on modulating CEIs for advanced lithium-ion batteries.