Selective Hydrogenation of Acrolein Over Pd Model Catalysts: Temperature and Particle-Size Effects.

The selectivity in the hydrogenation of acrolein over Fe3 O4 -supported Pd nanoparticles has been investigated as a function of nanoparticle size in the 220-270 K temperature range. While Pd(111) shows nearly 100 % selectivity towards the desired hydrogenation of the C=O bond to produce propenol, Pd nanoparticles were found to be much less selective towards this product. In situ detection of surface species by using IR-reflection absorption spectroscopy shows that the selectivity towards propenol critically depends on the formation of an oxopropyl spectator species. While an overlayer of oxopropyl species is effectively formed on Pd(111) turning the surface highly selective for propenol formation, this process is strongly hindered on Pd nanoparticles by acrolein decomposition resulting in CO formation. We show that the extent of acrolein decomposition can be tuned by varying the particle size and the reaction temperature. As a result, significant production of propenol is observed over 12 nm Pd nanoparticles at 250 K, while smaller (4 and 7 nm) nanoparticles did not produce propenol at any of the temperatures investigated. The possible origin of particle-size dependence of propenol formation is discussed. This work demonstrates that the selectivity in the hydrogenation of acrolein is controlled by the relative rates of acrolein partial hydrogenation to oxopropyl surface species and of acrolein decomposition, which has significant implications for rational catalyst design.

Adsorption of acrolein, propanal, and allyl alcohol on Pd(111): a combined infrared reflection-absorption spectroscopy and temperature programmed desorption study.

Atomistic-level understanding of the interaction of α,ß-unsaturated aldehydes and their derivatives with late transition metals is of fundamental importance for the rational design of new catalytic materials with the desired selectivity towards C[double bond, length as m-dash]C vs. C[double bond, length as m-dash]O bond partial hydrogenation. In this study, we investigate the interaction of acrolein, and its partial hydrogenation products propanal and allyl alcohol, with Pd(111) as a prototypical system. A combination of infrared reflection-absorption spectroscopy (IRAS) and temperature programmed desorption (TPD) experiments was applied under well-defined ultrahigh vacuum (UHV) conditions to obtain detailed information on the adsorption geometries of acrolein, propanal, and allyl alcohol as a function of coverage. We compare the IR spectra obtained for multilayer coverages, reflecting the molecular structure of unperturbed molecules, with the spectra acquired for sub-monolayer coverages, at which the chemical bonds of the molecules are strongly distorted. Coverage-dependent IR spectra of acrolein on Pd(111) point to the strong changes in the adsorption geometry with increasing acrolein coverage. Acrolein adsorbs with the C[double bond, length as m-dash]C and C[double bond, length as m-dash]O bonds lying parallel to the surface in the low coverage regime and changes its geometry to a more upright orientation with increasing coverage. TPD studies indicate decomposition of the species adsorbed in the sub-monolayer regime upon heating. Similar strong coverage dependence of the IR spectra were found for propanal and allyl alcohol. For all investigated molecules a detailed assignment of vibrational bands is reported.

Spectators Control Selectivity in Surface Chemistry: Acrolein Partial Hydrogenation Over Pd.

We present a mechanistic study on selective hydrogenation of acrolein over model Pd surfaces--both single crystal Pd(111) and Pd nanoparticles supported on a model oxide support. We show for the first time that selective hydrogenation of the C═O bond in acrolein to form an unsaturated alcohol is possible over Pd(111) with nearly 100% selectivity. However, this process requires a very distinct modification of the Pd(111) surface with an overlayer of oxopropyl spectator species that are formed from acrolein during the initial stages of reaction and turn the metal surface selective toward propenol formation. By applying pulsed multimolecular beam experiments and in situ infrared reflection-absorption spectroscopy, we identified the chemical nature of the spectator and the reactive surface intermediate (propenoxy species) and experimentally followed the simultaneous evolution of the reactive intermediate on the surface and formation of the product in the gas phase.

Water Interaction with Iron Oxides.

We present a mechanistic study on the interaction of water with a well-defined model Fe3O4(111) surface that was investigated by a combination of direct calorimetric measurements of adsorption energies, infrared vibrational spectroscopy, and calculations bases on density functional theory (DFT). We show that the adsorption energy of water (101 kJ mol(-1)) is considerably higher than all previously reported values obtained by indirect desorption-based methods. By employing (18)O-labeled water molecules and an Fe3 O4 substrate, we proved that the generally accepted simple model of water dissociation to form two individual OH groups per water molecule is not correct. DFT calculations suggest formation of a dimer, which consists of one water molecule dissociated into two OH groups and another non-dissociated water molecule creating a thermodynamically very stable dimer-like complex.

Nonthermal Plasma-Stimulated C-N Coupling from CH4 and N2 Depends on the Presence of Surface CHx and Plasma-Phase CN Species.

Formation of C-N containing compounds from plasma-catalytic coupling of CH4 and N2 over various transition metals (Ni, Pd, Cu, Ag, and Au) is investigated using a multimodal spectroscopic approach, combining polarization-modulation infrared reflection-absorption spectroscopy (PM-IRAS) and optical emission spectroscopy (OES). Through sequential experiments utilizing CH4 and N2 nonthermal plasmas, we minimize plasma-phase reactions and identify key intermediates for C-N coupling on metal surfaces. Results show that simultaneous CH4 and N2 exposure with plasma stimulation produces surface C-N species. However, N2-CH4 sequential exposure does not lead to C-N species formation, while CH4-N2 sequential exposure reveals the presence of CHx surface species and CN radical species as key precursors to C-N species formation. From further analysis using X-ray photoelectron spectroscopy and liquid chromatography-mass spectrometry, the influence of exposure conditions on the degree of nitrogen incorporation and the nature of C-N species formed were revealed. The work highlights the importance of surface chemistry and exposure conditions in surface C-N coupling with plasma stimulation.

Observation and Characterization of Vibrationally Active Surface Species Accessed with Nonthermal Nitrogen Plasmas.

Polycrystalline Ni, Pd, Cu, Ag, and Au foils exposed to nonthermal plasma (NTP)-activated N2 are found to exhibit a vibrational feature near 2200 cm-1 in polarization-modulation infrared reflection-absorption spectroscopy (PM-IRAS) observations that are not present in the same materials exposed to N2 under nonplasma conditions. The feature is similar to that reported elsewhere and is typically assigned to chemisorbed N2. We employ a combination of temperature-dependent experiments, sequential dosing, X-ray photoelectron spectroscopy, isotopic labeling, and density functional theory calculations to characterize the feature. Results are most consistent with a triatomic species, likely NCO, with the C and O likely originating from ppm-level impurities in the ultrahigh-purity (UHP) Ar and/or N2 gas cylinders. The work highlights the potential for nonthermal plasmas to access adsorbates inaccessible thermally as well as the potential contributions of ppm-level impurities to corrupt the interpretation of plasma catalytic chemistry.

A US perspective on closing the carbon cycle to defossilize difficult-to-electrify segments of our economy.

Electrification to reduce or eliminate greenhouse gas emissions is essential to mitigate climate change. However, a substantial portion of our manufacturing and transportation infrastructure will be difficult to electrify and/or will continue to use carbon as a key component, including areas in aviation, heavy-duty and marine transportation, and the chemical industry. In this Roadmap, we explore how multidisciplinary approaches will enable us to close the carbon cycle and create a circular economy by defossilizing these difficult-to-electrify areas and those that will continue to need carbon. We discuss two approaches for this: developing carbon alternatives and improving our ability to reuse carbon, enabled by separations. Furthermore, we posit that co-design and use-driven fundamental science are essential to reach aggressive greenhouse gas reduction targets.

Multi-Functional Polymer Membranes Enable Integrated CO2 Capture and Conversion in a Single, Continuous-Flow Membrane Reactor under Mild Conditions.

Herein, we present a membrane-based system designed to capture CO2 from dilute mixtures and convert the captured CO2 into value-added products in a single integrated process operated continuously under mild conditions. Specifically, we demonstrate that quaternized poly(4-vinylpyridine) (P4VP) membranes are selective CO2 separation membranes that are also catalytically active for cyclic carbonate synthesis from the cycloaddition of CO2 to epichlorohydrin. We further demonstrate that quaternized P4VP membranes can integrate CO2 capture, including from dilute mixtures down to 0.1 kPa of CO2, with CO2 conversion to cyclic carbonates at 57 °C and atmospheric pressure. The catalytic membrane acts as both the CO2 capture and conversion medium, providing an energy-efficient alternative to sorbent-based capture, compression, transport, and storage. The membrane is also potentially tunable for the conversion of CO2 to a variety of products, including chemicals and fuels not limited to cyclic carbonates, which would be a transformative shift in carbon capture and utilization technology.

Operando Surface-Enhanced Raman-Scattering (SERS) for Probing CO2 Facilitated Transport Mechanisms of Amine-Functionalized Polymeric Membranes.

This work describes a new operando surface enhanced Raman spectroscopy (SERS) platform that we developed for use with polymeric membranes that includes (1) a method for preparing SERS-active polymer membranes and (2) a permeation cell with optical access for SERS characterization of membranes under realistic operating conditions. This technique enables the direct correlation of membrane structure to its performance under realistic operating conditions by combining in situ SERS characterization of the molecular structure of polymer membranes and simultaneous measurement of solute permeation rates on the same sample. Using the new operando SERS technique, this work aims to clarify the unknown mechanisms by which reactive amines facilitate CO2 transport across polyvinylamine (PVAm), a prototypical facilitated transport membrane for CO2 separations. We show that a small amount of plasmonic silver particles added to the PVAm solution prior to knife-casting selectively enhances the sensitivity to detection of chemical intermediates (e.g., carbamate) formed in the PVAm film due to the surface-enhanced Raman scattering effect with only minimal effect on the CO2 permeance and selectivity of the membrane. Operando SERS characterization of PVAm during exposure to humidified CO2/CH4 biogas mixtures at room temperature shows that CO2 permeates across PVAm primarily as carbamate species. This work clarifies the previously unknown mechanism of CO2 facilitated transport across PVAm and establishes a new operando SERS platform that can be used with a wide range of polymer membrane systems. This technique can be used to elucidate fundamental transport mechanisms in polymer membranes, to establish reliable structure-performance relationships, and for real-time diagnostics of membrane fouling, among other applications.

Highly Active CuOx/SiO2 Dot Core/Rod Shell Catalysts with Enhanced Stability for the Reverse Water Gas Shift Reaction.

Cu-based catalysts are highly active and selective for several CO2 conversion reactions; however, traditional monometallic Cu-based catalysts suffer poor thermal stability due to the aggregation of copper particles at high temperatures. In this work, we demonstrate a crystal engineering strategy to controllably prepare copper/silica (CuOx/SiO2) catalysts for the reverse water gas shift reaction (RWGS) at high temperatures. We show that CuOx/SiO2 catalysts derived from the in situ reduction of pure copper silicate nanotubes in a CO2 and H2 atmosphere exhibit superior catalytic activity with enhanced stability compared to traditional monometallic Cu-based catalysts for the RWGS at high temperatures. Detailed structural characterization reveals that there is a strong interaction between Cu and SiO2 in CuOx/SiO2 catalysts, which produces more Cu+ sites and smaller CuOx nanoparticles. Moreover, CuOx/SiO2 catalysts possess a unique dot core/rod shell structure, which could prevent the aggregation of Cu particles. This structural confinement effect, enhanced CO2 adsorption by Cu+, and small CuOx nanoparticles presumably caused the catalyst's extraordinary activity with enhanced stability at high temperatures.

Direct Observation of Plasma-Stimulated Activation of Surface Species Using Multimodal In Situ/Operando Spectroscopy Combining Polarization-Modulation Infrared Reflection-Absorption Spectroscopy, Optical Emission Spectroscopy, and Mass Spectrometry.

Nonthermal plasmas (NTPs) produce reactive chemical environments, including electrons, ions, radicals, and vibrationally excited molecules, that can drive chemistry at temperatures at which such species are thermally inaccessible. There has been growing interest in the integration of conventional catalysis with reactive NTPs to promote novel chemical transformations. Unveiling the full potential of plasma-catalytic processes requires a comprehensive understanding of plasma-catalytic synergies, including characterization of plasma-catalytic surface interactions. In this work, we report on a newly designed multimodal spectroscopic instrument combining polarization-modulation infrared reflection-absorption spectroscopy (PM-IRAS), mass spectrometry, and optical emission spectroscopy (OES) for the investigation of plasma-surface interactions such as those found in plasma catalysis. In particular, this tool has been utilized to correlate plasma-phase chemistry with both surface chemistry and gas-phase products in situ (1) during the deposition of carbonaceous surface species via NTP-promoted nonoxidative coupling of methane and (2) during subsequent activation of surface deposits with an atmospheric pressure and temperature argon plasma jet on both nickel (Ni) and silicon dioxide (SiO2) surfaces. For the first time, the activation of carbonaceous surface species by a NTP on Ni and SiO2 surfaces to form hydrogen gas and C2 hydrocarbons was directly observed, where both PM-IRAS and OES measurements suggest that they may form through different pathways. This unique tool for studying plasma-surface interactions could enable more rational design of plasma-stimulated catalytic processes.

Evolution of surface catalytic sites on thermochemically-tuned gold-palladium nanoalloys.

Nanoscale alloying constitutes an increasingly-important pathway for design of catalysts for a wide range of technologically important reactions. A key challenge is the ability to control the surface catalytic sites in terms of the alloying composition, thermochemical treatment and phase in correlation with the catalytic properties. Herein we show novel findings of the nanoscale evolution of surface catalytic sites on thermochemically-tuned gold-palladium nanoalloys by probing CO adsorption and oxidation using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) technique. In addition to the bimetallic composition and the support, the surface sites are shown to depend strongly on the thermochemical treatment condition, demonstrating that the ratio of three-fold vs. bridge or atop Pd sites is greatly reduced by thermochemical treatment under hydrogen in comparison with that under oxygen. This type of surface reconstruction is further supported by synchrotron high-energy X-ray diffraction coupled to atomic pair distribution function (HE-XRD/PDF) analysis of the nanoalloy structure, revealing an enhanced degree of random alloying for the catalysts thermochemically treated under hydrogen. The nanoscale alloying and surface site evolution characteristics were found to correlate strongly with the catalytic activity of CO oxidation. These findings have significant implications for the nanoalloy-based design of catalytic synergy.

Catalysis beyond frontier molecular orbitals: Selectivity in partial hydrogenation of multi-unsaturated hydrocarbons on metal catalysts.

The mechanistic understanding and control over transformations of multi-unsaturated hydrocarbons on transition metal surfaces remains one of the major challenges of hydrogenation catalysis. To reveal the microscopic origins of hydrogenation chemoselectivity, we performed a comprehensive theoretical investigation on the reactivity of two α,ß-unsaturated carbonyls-isophorone and acrolein-on seven (111) metal surfaces: Pd, Pt, Rh, Ir, Cu, Ag, and Au. In doing so, we uncover a general mechanism that goes beyond the celebrated frontier molecular orbital theory, rationalizing the C═C bond activation in isophorone and acrolein as a result of significant surface-induced broadening of high-energy inner molecular orbitals. By extending our calculations to hydrogen-precovered surface and higher adsorbate surface coverage, we further confirm the validity of the "inner orbital broadening mechanism" under realistic catalytic conditions. The proposed mechanism is fully supported by our experimental reaction studies for isophorone and acrolein over Pd nanoparticles terminated with (111) facets. Although the position of the frontier molecular orbitals in these molecules, which are commonly considered to be responsible for chemical interactions, suggests preferential hydrogenation of the C═O double bond, experiments show that hydrogenation occurs at the C═C bond on Pd catalysts. The extent of broadening of inner molecular orbitals might be used as a guiding principle to predict the chemoselectivity for a wide class of catalytic reactions at metal surfaces.

Interaction of Isophorone with Pd(111): A Combination of Infrared Reflection-Absorption Spectroscopy, Near-Edge X-ray Absorption Fine Structure, and Density Functional Theory Studies.

Atomistic level understanding of interaction of α,ß-unsaturated carbonyls with late transition metals is a key prerequisite for rational design of new catalytic materials with the desired selectivity toward C=C or C=O bond hydrogenation. The interaction of this class of compounds with transition metals was investigated on α,ß-unsaturated ketone isophorone on Pd(111) as a prototypical system. In this study, infrared reflection-absorption spectroscopy (IRAS), near-edge X-ray absorption fine structure (NEXAFS) experiments, and density functional theory calculations including van der Waals interactions (DFT+vdW) were combined to obtain detailed information on the binding of isophorone to palladium at different coverages and on the effect of preadsorbed hydrogen on the binding and adsorption geometry. According to these experimental observations and the results of theoretical calculations, isophorone adsorbs on Pd(111) in a flat-lying geometry at low coverages. With increasing coverage, both C=C and C=O bonds of isophorone tilt with respect to the surface plane. The tilting is considerably more pronounced for the C=C bond on the pristine Pd(111) surface, indicating a prominent perturbation and structural distortion of the conjugated π system upon interaction with Pd. Preadsorbed hydrogen leads to higher tilting angles of both π bonds, which points to much weaker interaction of isophorone with hydrogen-precovered Pd and suggests the conservation of the in-plane geometry of the conjugated π system. The results of the DFT+vdW calculations provide further insights into the perturbation of the molecular structure of isophorone on Pd(111).