Novel susceptibility loci for steroid-associated osteonecrosis of the femoral head in systemic lupus erythematosus.

Osteonecrosis of the femoral head (ONFH) involves necrosis of bone and bone marrow of the femoral head caused by ischemia with unknown etiology. Previous genetic studies on ONFH failed to produce consistent results, presumably because ONFH has various causes with different genetic backgrounds and the underlying diseases confounded the associations. Steroid-associated ONFH (S-ONFH) accounts for one-half of all ONFH, and systemic lupus erythematosus (SLE) is a representative disease underlying S-ONFH. We performed a genome-wide association study (GWAS) to identify genetic risk factors for S-ONFH in patients with SLE. We conducted a two-staged GWAS on 636 SLE patients with S-ONFH and 95 588 non-SLE controls. Among the novel loci identified, we determined S-ONFH-specific loci by comparing allele frequencies between SLE patients without S-ONFH and non-SLE controls. We also used Korean datasets comprising 148 S-ONFH cases and 37 015 controls to assess overall significance. We evaluated the functional annotations of significant variants by in silico analyses. The Japanese GWAS identified 4 significant loci together with 12 known SLE susceptibility loci. The four significant variants showed comparable effect sizes on S-ONFH compared with SLE controls and non-SLE controls. Three of the four loci, MIR4293/MIR1265 [odds ratio (OR) = 1.99, P-value = 1.1 × 10-9)], TRIM49/NAALAD2 (OR = 1.65, P-value = 4.8 × 10-8) and MYO16 (OR = 3.91, P-value = 4.9 × 10-10), showed significant associations in the meta-analysis with Korean datasets. Bioinformatics analyses identified MIR4293, NAALAD2 and MYO16 as candidate causal genes. MIR4293 regulates a PPARG-related adipogenesis pathway relevant to S-ONFH. We identified three novel susceptibility loci for S-ONFH in SLE.

No Impact of Contact Between the Medial Collar of a Hydroxyapatite-Coated Triple-Tapered Stem and the Femoral Neck on Periprosthetic Bone Mineral Density.

BACKGROUND: Hydroxyapatite-coated, triple-tapered, shorter-length stems with a medial collar have been reported with good results for a few years. We investigated whether contact between the medial collar and femoral neck affects clinical outcomes and changes in bone mineral density (BMD) in patients who have this type of stem in their total hip arthroplasty construct. METHODS: This was a retrospective, single-center study involving 62 patients scheduled for unilateral total hip arthroplasty using a hydroxyapatite-coated, triple-tapered, shorter-length stem who were followed for at least 1 year postoperatively. All patients had a Dorr type B femoral canal shape. Contact between the medial collar and the femoral neck was evaluated by computed tomography at the third postoperative month, and patients were classified into 2 groups. Postoperative clinical outcomes were investigated by the Western Ontario and McMaster Universities Arthritis Index and the Japanese Orthopaedic Association scores; radiological evaluation included stem fixation, spot welds and cortical hypertrophy, postoperative 3-dimensional stem alignment, and periprosthetic BMD changes. RESULTS: There were 51 patients in the Contact + group (collar and neck contact) and 11 in the Contact-group (no contact). There were no differences between the 2 groups in the improvement of Western Ontario and McMaster Universities Arthritis Index and Japanese Orthopaedic Association scores, stem fixation, occurrence of cortical hypertrophy, or 3-dimensional stem alignment. Radiolucent lines were present in zones 3, 4, and 5 in 6 patients (12%) in the Contact + group only, who had no statistical difference between the 2 groups. Bone mineral density (BMD) decreased most in zone 7 in both groups, with no difference between the 2 groups. CONCLUSIONS: The presence or absence of contact between the medial collar and femoral neck did not affect postoperative BMD changes or radiological or clinical results. LEVEL OF EVIDENCE: Therapeutic Level III.

A novel imageless accelerometer-based navigation system improves acetabular cup placement accuracy during total hip arthroplasty in the lateral decubitus position.

INTRODUCTION: The accuracy of acetabular cup placement using conventional portable imageless navigation systems in total hip arthroplasty (THA) in the lateral decubitus position remains challenging. Several novel portable imageless navigation systems have been developed recently to improve cup placement accuracy in THA. This study compared the accuracy of acetabular cup placement using a conventional accelerometer-based portable navigation (c-APN) system and a novel accelerometer-based portable navigation (n-APN) system during THA in the lateral decubitus position. MATERIALS AND METHODS: This retrospective cohort study compared 45 THAs using the c-APN and 45 THAs using the n-APN system. The primary outcomes were the absolute errors between the intraoperative and postoperative values of acetabular cup radiographic inclination and anteversion angles and the percentage of cases with absolute errors within 5°. Intraoperative values were shown on navigation systems, and postoperative measurements were conducted using computed tomography images. RESULTS: The median absolute errors of the cup inclination angles were significantly smaller in the n-APN group than in the c-APN group (3.9° [interquartile range 2.2°-6.0°] versus 2.2° [interquartile range 1.0°-3.3°]; P = 0.002). Additionally, the median absolute errors of the cup anteversion angles were significantly smaller in the n-APN group than in the c-APN group (4.4° [interquartile range 2.4°-6.5°] versus 1.9° [interquartile range 0.8°-2.7°]; P < 0.001). Significant differences were observed in the percentage of cases with absolute errors within 5° of inclination (c-APN group 67% versus n-APN group 84%; P = 0.049) and anteversion angles (c-APN group 62% versus n-APN group 91%; P = 0.001). CONCLUSIONS: The n-APN system improved the accuracy of the cup placement compared to the c-APN system for THA in the lateral decubitus position.

Is bone remodelling around fully hydroxyapatite-coated and tapered-wedge stems related to the stem fixation pattern?

PURPOSE: This study aimed to compare bone mineral density (BMD) changes around the femoral component after total hip arthroplasty (THA) in a fully hydroxyapatite-coated stem (CORAIL) and in a tapered-wedge stem (Taperloc complete) and identify predictors of BMD changes. METHODS: This retrospective study compared 43 hips in the CORAIL group and 40 hips in the Taperloc group. The relative changes in BMD at 2 years after THA measured using dual-energy X-ray absorptiometry and the three-dimensional quantified contact states of the stem with the femoral cortical bone were assessed. Predictors of the relative change in the BMD around the proximal part of the stem were examined using multiple regression analysis. RESULTS: The decrease in BMD in Gruen zone 7 was significantly less in the CORAIL group than in the Taperloc group (P = 0.02). In the CORAIL group, the contact area in any zone was not a significant predictor of the relative changes in BMD. The contact area between the Taperloc stem and the femoral cortical bone in zones 2 and 6 was a positive predictor of the relative changes in BMD in zones 1 (P = 0.02 and P = 0.04, respectively) and 2 (P = 0.008 and P = 0.004, respectively). CONCLUSION: The CORAIL stem suppressed the postoperative BMD loss around the stem, irrespective of the contact state. The Taperloc complete stem required contact with the proximal femoral metaphysis to suppress the postoperative BMD loss around the stem.

Mobile-bearing prosthesis suppresses the postoperative rotational mismatch and improves patient-reported outcome measurements better than fixed-bearing prosthesis: rotational analysis by 3D measurement in total knee arthroplasty.

INTRODUCTION: It is preferable to reduce postoperative excessive rotational mismatch between the femur and tibia that causes poor clinical results following total knee arthroplasty (TKA). The aim of this study is to compare postoperative rotational mismatches and clinical outcomes with mobile- and fixed-bearing prostheses. MATERIALS AND METHODS: This study classified 190 TKAs into two groups equally by propensity score matching: mobile-bearing group (n = 95) and fixed-bearing group (n = 95). Computed tomography images of the whole leg were taken at 2 weeks postoperatively. The component alignments, rotational mismatches between the femur and tibia, and rotations among components were measured three-dimensionally. The knee range of motion, New Knee Society Score (KSS) subjective sores, and Forgotten Joint Score (FJS-12) were assessed at the final follow-up. RESULTS: Rotational mismatch between the femur and tibia was significantly less in the mobile- (- 0.8° ± 7.3°) than in the fixed-bearing (3.3° ± 8.5°, p < 0.001) group. New KSS functional activity score was significantly poorer in patients with excessive rotational mismatch (61.3 ± 21.4) than in those without it (49.5 ± 20.6, p = 0.02). Comparing mobile-bearing prosthesis, the use of fixed-bearing prosthesis was a risk factor for postoperative excessive rotational mismatch (odds ratio: 2.32, p = 0.03). CONCLUSION: When compared to a fixed-bearing prosthesis, TKA using a mobile-bearing prosthesis could suppress the postoperative rotational mismatch between the femur and tibia that causes poor subjective functional activity score. However, since this study was conducted for PS-TKA, the results might not be applicable to other models.

A double tapered fully hydroxyapatite-coated stem has less contact area to femoral cortical bone than a tapered-wedge stem: a three-dimensional computed tomography-based density mapping analysis.

INTRODUCTION: It is clinically important to analyze the initial contact state between an implant and femoral cortical bone as it affects clinical outcomes, such as stress shielding, stem subsidence, thigh pain, and patient-reported outcomes after total hip arthroplasty. Whether the initial contact state of a double-tapered fully hydroxyapatite (HA)-coated stem is achieved with the preserved cancellous or cortical bone remains to be established. This study aimed to compare the contact area with the femoral cortical bone between a double-tapered fully HA-coated stem (HA group) and a tapered wedge cementless stem (TW group) using three-dimensional computed tomography (3DCT)-based templating software. MATERIALS AND METHODS: Forty-seven total hip arthroplasties in the HA and TW groups each were retrospectively analyzed. The contact area between the implant and femoral cortical bone in the whole stem and at each Gruen zone was measured using density mapping with 3DCT-based templating software. RESULTS: The demographic data were not significantly different between the two groups. The contact area in the whole stem area was lower in the HA group (HA 5.4 ± 1.8% vs. TW 9.0 ± 4.8%, p < 0.01). The HA group had a lower contact area in zone 2 (HA 6.7 ± 6.5% vs. TW 15.6 ± 10.8%, p < 0.01) and zone 6 (HA 1.8 ± 3.5% vs. TW 6.3 ± 3.6%, p < 0.01) than the TW group. The implant type (ß = 0.41, p < 0.01) and stem coronal alignment (ß = - 0.29, p < 0.01) were significant predictors of the contact area in the whole stem area in a multiple regression analysis (adjusted R2 = 0.27, p < 0.01). CONCLUSION: The contact area of the double-tapered fully HA-coated stem was significantly lower than that of the tapered wedge cementless stem.

A new accelerometer-based portable navigation system provides high accuracy of acetabular cup placement in total hip arthroplasty in both the lateral decubitus and supine positions.

INTRODUCTION: No studies have compared the accuracy of acetabular cup placement in total hip arthroplasty (THA) in the supine and lateral decubitus positions using the same portable navigation system. Thus, this study aimed to compare the accuracy of acetabular cup placement using a new accelerometer-based portable navigation system combined with an infrared stereo camera and inertial measurement unit between the supine and lateral decubitus positions. MATERIALS AND METHODS: This retrospective study compared 45 THAs performed in the supine position (supine group) and 44 THAs performed in the lateral decubitus position (lateral group) using the same portable navigation system. The primary outcome was the absolute errors of cup placement angles, defined as the absolute values of the differences between cup radiographic inclination and anteversion angles displayed on the navigation system and those measured on postoperative computed tomography images. RESULTS: No significant difference in the median absolute error of the cup inclination angle (supine group 1.7° [interquartile range 0.8°-3.1°] vs. lateral group 2.1° [interquartile range 1.0°-3.7°]; p = 0.07) was found between the two groups. Similarly, no significant difference in the median absolute error of the anteversion angle (supine group 1.9° [interquartile range 0.8°-3.4°] vs. lateral group 2.1° [interquartile range 0.9°-3.1°]; p = 0.42) was found. CONCLUSION: This new accelerometer-based portable navigation system may provide high accuracy of the cup placement in THA in the lateral decubitus and supine positions.

The modification of bone cut angle and joint line obliquity did not change the tibiofemoral kinematics and stability of knee joint after total knee arthroplasty.

INTRODUCTION: Previous reports using cadaveric knees and musculoskeletal computer simulation have shown that kinematically aligned (KA) total knee arthroplasty (TKA) provides more natural and physiological tibiofemoral kinematic patterns than mechanically aligned (MA) TKA. These reports suggested that the modification of joint line obliquity improve the knee kinematics. This study aimed to determine whether joint line obliquity change the intraoperative tibiofemoral kinematics in TKA candidates with knee osteoarthritis. METHODS: Thirty consecutive knees with varus osteoarthritis that underwent TKA using a navigation system were evaluated. Two types of trial components were prepared: (1) MA TKA model: component trial in which articulating surface was parallel to the bone cut surface (2) KA TKA model: the femoral component trial, which mimicked the KA TKA method of Dossett et al. was designed 3° valgus and 3° internal rotation to the femoral bone cut surface, and the tibial component trial was designed 3° varus to the tibial bone cut surface. These two trials were set on the same knees during the operation, and the tibiofemoral rotational kinematics and varus-valgus laxity were measured from 0° to 120° of knee flexion using a navigation system. RESULTS: The joint gap was 20 ± 2 mm and 3° ± 1° varus in extension and 20 ± 2 mm and 3° ± 1°varus in flexion. The differences in femoral component rotation between KA TKA and MA TKA were not statistically significant for any knee flexion angle. The differences in varus-valgus laxity between KA TKA and MA TKA were also not statistically significant for any knee flexion angle. CONCLUSION: Although the degree of joint line obliquity varies widely in various KA TKA methods, this study, which mimicked the method of Dossett et al. showed that the modification of joint line obliquity did not change the tibiofemoral kinematics and stability of the knee joint in TKA candidates with knee osteoarthritis.

Eldecalcitol regulates the gene expressions of articular cartilage markers and differentiation markers in chondrocytes.

Vitamin D has been shown to reduce symptoms in patients with osteoarthritis (OA). In a previous study, local administration of eldecalcitol, an active vitamin D3 analog, reduced degenerative changes in articular cartilage in the early phase of experimental OA. However, the target of vitamin D in OA remains unknown. Here, we investigated the effect of eldecalcitol treatment on chondrocytes, which were divided into superficial zone chondrocytes (SZC), deep zone chondrocytes (DZC), and differentiated chondrocytes. SZC and DZC were cultured in monolayer and 3D pellet cultures treated with eldecalcitol. The gene expressions of articular cartilage and chondrocyte differentiation markers were evaluated. Histological analysis of SZC and DZC 3D pellet cultures was performed. The results showed that the articular cartilage markers ETS-related gene (Erg) and lubricin/proteoglycan 4 (PRG4) were significantly increased in SZC, but not in DZC, in the monolayer culture treated with eldecalcitol. The chondrocyte differentiation markers type X collagen and alkaline phosphatase (ALP) were significantly decreased in the DZC pellet culture treated with eldecalcitol. Immunochemical analysis also showed that Erg and lubricin/PRG4 expressions were elevated in the SZC pellet culture treated with eldecalcitol, while type X collagen and ALP expressions were decreased in the DZC pellet culture treated with eldecalcitol. In conclusion, this study showed that eldecalcitol upregulated articular cartilage markers in SZC and suppressed differentiation markers in DZC. Such regulation of chondrocytes by eldecalcitol could be potentially effective against OA progression.

Is medial pivot total knee arthroplasty suitable for patients with valgus knee osteoarthritis?

PURPOSE: Medial pivot total knee arthroplasty (MP-TKA) is characterized by the ball-in-socket medial tibiofemoral articulation to achieve low wear and to reproduce the medial pivot motion similar to that in the normal knee, and there have been reports of favorable long-term postsurgical outcomes. However, most of these cases concerned varus knees, and the outcomes of MP-TKA in valgus knees are unknown. The objective of this study was to investigate the postoperative outcomes in end-stage valgus knee OA patients who underwent MP-TKA, through comparisons with those who underwent TKA using the same prosthesis for varus deformity. METHODS: This retrospective, single-center, cohort study analyzed 171 knees of 121 patients who were divided into two groups (valgus knee group: 15 knees (13 patients), varus knee group: 156 knees (109 patients)). Primary outcome measures included the knee joint range of motion (evaluated preoperatively and at every year postoperatively). Secondary outcomes included operative time, laboratory data, estimated blood loss, clinical outcome measures and adverse events. RESULTS: There were no significant differences in age, sex and body mass index, as well as in the postoperative primary and secondary outcome measures between the two groups. CONCLUSION: The use of MP-TKA featuring ball-in-socket medial tibiofemoral articulation in patients with valgus knee OA showed equally favorable clinical outcomes more than 2 years after surgery, compared to patients with varus knees who received MP-TKA.

Topical co-administration of zoledronate with recombinant human bone morphogenetic protein-2 can induce and maintain bone formation in the bone marrow environment.

BACKGROUND: Bone morphogenetic proteins (BMPs) induce osteogenesis in various environments. However, when BMPs are used alone in the bone marrow environment, the maintenance of new bone formation is difficult owing to vigorous bone resorption. This is because BMPs stimulate the differentiation of not only osteoblast precursor cells but also osteoclast precursor cells. The present study aimed to induce and maintain new bone formation using the topical co-administration of recombinant human BMP-2 (rh-BMP-2) and zoledronate (ZOL) on beta-tricalcium phosphate (ß-TCP) composite. METHODS: ß-TCP columns were impregnated with both rh-BMP-2 (30 µg) and ZOL (5 µg), rh-BMP-2 alone, or ZOL alone, and implanted into the left femur canal of New Zealand white rabbits (n = 56). The implanted ß-TCP columns were harvested and evaluated at 3 and 6 weeks after implantation. These harvested ß-TCP columns were evaluated radiologically using plane radiograph, and histologically using haematoxylin/eosin (H&E) and Masson's trichrome (MT) staining. In addition, micro-computed tomography (CT) was performed for qualitative analysis of bone formation in each group (n = 7). RESULTS: Tissue sections stained with H&E and MT dyes revealed that new bone formation inside the ß-TCP composite was significantly greater in those impregnated with both rh-BMP-2 and ZOL than in those from the other experimental groups at 3 and 6 weeks after implantations (p < 0.05). Micro-CT data also demonstrated that the bone volume and the bone mineral density inside the ß-TCP columns were significantly greater in those impregnated with both rh-BMP-2 and ZOL than in those from the other experimental groups at 3 and 6 weeks after implantations (p < 0.05). CONCLUSIONS: The topical co-administration of both rh-BMP-2 and ZOL on ß-TCP composite promoted and maintained newly formed bone structure in the bone marrow environment.

Four-Millimeter Additional Bone Resection in the Distal Femur Does Not Result in an Equivalent Increase in the Extension Joint Gap in Total Knee Arthroplasty.

BACKGROUND: Additional bone resection in the distal femur is performed to increase the extension joint gap in total knee arthroplasty (TKA). The present study aimed to analyze the relationship between the amount of additional bone resection in the distal femur and the increase in the extension joint gap in TKA. METHODS: Fifty knees undergoing TKA for varus osteoarthritis were evaluated. Two femoral trial component models were prepared: (1) a normal model with 9-mm-thick distal and posterior femoral components and (2) an additional bone resection model with a 5-mm-thick distal femoral component (9 mm to 4 mm) and a 9-mm-thick posterior femoral component, which simulated an additional bone cut in the distal femur of 4 mm. The femoral trial component models were set before implantation, and the extension joint gap was measured using a tensor device that had a shape identical to that of the fixed-bearing tibial insert. RESULTS: The additional bone resection model had a larger joint gap than the normal model (P < .01). The mean extension gap increase in the additional bone resection model was 2 (standard deviation 1) mm, which was less than the thickness of the additional bone resection (4 mm) (P < .01). CONCLUSION: The amount of additional bone resection in the distal femur was not equal to the increase in the extension joint gap. Additional bone resection of 4 mm in the distal femur only increased the extension joint gap by a mean of 2 mm.

Changes in patient-perceived leg length discrepancy following total hip arthroplasty.

PURPOSE: Leg length discrepancy (LLD) after total hip arthroplasty (THA) prevents functional recovery and reduces patient satisfaction. We investigated impact of changes in patient-perceived LLD on patient satisfaction and walking ability. METHODS: one hundred and forty-nine patients with unilateral hip osteoarthritis undergoing THA from 2014 to 2017, (125 women, 24 men; average age, 68.5 years) with an objective LLD < 1 cm were included. Outcome measures included the patient-perceived LLD, Western Ontario and McMaster Universities Osteoarthritis (WOMAC) index, 10-m walking speed, and affected leg loading rate, assessed preoperatively and at 3 weeks, 3 months, and 1 year postoperatively. RESULTS: The absolute patient-perceived LLD (mean ± SD) (the number of patients with perceived LLD > 5 mm) were 6.4 ± 9.6 mm [88 patients (59%)] preoperatively; and 2.2 ± 4.0 mm [48 (32%); p < 0.001], 0.7 ± 2.3 mm [17 (11%); p < 0.001], and 0.4 ± 1.6 mm [10 (7%); p = 0.095] at 3 weeks, 3 months, and 1 year postoperatively, respectively. All outcome measures improved over time. One year postoperatively, a weak positive correlation between the patient-perceived LLD and WOMAC or 10-m walking speed (r = 0.24, 0.23, respectively) was found. The risk of patient-perceived LLD persisting > 1 year postoperatively was 5.5-fold higher in patients who exhibited it at 3 months and those with a WOMAC score > 10 at 3 months postoperatively, using multivariate logistic regression. CONCLUSION: Achieving a post-THA objective LLD < 1 cm significantly reduced the patient-perceived LLD up to 3 months postoperatively. The residual patient-perceived LLD at 1 year postoperatively was predicted from the WOMAC score or the presence of patient-perceived LLD at 3 months after THA. LEVEL OF EVIDENCE: Therapeutic level IV.

Joint line elevation is not associated with mid-flexion laxity in patients with varus osteoarthritis after total knee arthroplasty.

PURPOSE: Previous cadaver studies showed that the additional bone cuts in the distal and posterior femur and joint line elevation resulted in laxity at mid-flexion after total knee arthroplasty (TKA). However, these results are not always applicable to TKA candidates because the related studies used cadaver knees with no osteoarthritis. It was hypothesized that the joint line elevation results in mid-flexion laxity after TKA in patients with knee osteoarthritis. The purpose of this study was to analyze the relationship between joint line elevation and mid-flexion laxity in patients with knee osteoarthritis. METHODS: 30 knees with varus osteoarthritis undergoing TKA were evaluated. Two femoral trial component models were prepared: (1) normal model with a thickness of the distal and posterior femoral components of 9 mm, and (2) 2-mm joint line elevation model with a thickness of the distal and posterior femoral components of 9 - 2 = 7 mm. This 2-mm joint line elevation model simulated an additional bone cut in the distal and posterior femur, and joint line elevation, without an additional bone cut. The femoral trial component models were set before implantation and measured the joint gap kinematics using a tensor device through the full knee range of motion. RESULTS: The differences in joint gap change from 30° to 90° were not statistically significant between the two models. However, the joint line elevation model decreased the joint gap laxity at 120° (p = 0.02) and at 145° (p = 0.01). CONCLUSIONS: This study showed that a 2-mm joint line elevation was not associated with mid-flexion laxity in patients with varus osteoarthritis in the knee. The results of this study differed from the results in previous cadaver studies. LEVEL OF EVIDENCE: Therapeutic study, level II, prospective comparative study.

Design improvement in patient-specific instrumentation for total knee arthroplasty improved the accuracy of the tibial prosthetic alignment in the coronal and axial planes.

PURPOSE: The accuracy of patient-specific instrumentation (PSI) in total knee arthroplasty (TKA) is still controversial, especially in the tibial prosthesis. It was hypothesized that the design modification of PSI improved the tibial prosthetic alignment and reduced the associated complications. The aim of this study was to compare the accuracy of a conventional PSI with that of a newly designed PSI for total knee arthroplasty (TKA) using a new three-dimensional (3D) measurement method. METHODS: Thirty TKAs each using the conventional and newly designed PSIs were studied. The postoperative 3D-computed tomography (3D CT) image was superimposed on the preoperative 3D CT plan. The absolute differences in the tibial prosthetic alignment between the preoperative and postoperative 3D CT images were directly measured in the coronal, sagittal, and axial planes. Knees in which the difference in the prosthetic alignment was > 3° were considered deviations. RESULTS: The new PSI showed less mean absolute differences and lower rate of deviations than the conventional PSI in the coronal and axial planes (p = 0.045 and p = 0.004, respectively). The deviations (> 3°) of the tibial prosthesis using the conventional PSI were 27, 30, and 63% and of those using the new PSI were 0, 20, and 20% in the coronal, sagittal, and axial planes, respectively. CONCLUSIONS: This is the first report to evaluate the effect of improvement in PSI design on the postoperative alignment using 3D method, and it clearly showed that the modification significantly improved the accuracy of alignment and reduced the deviations. LEVEL OF EVIDENCE: Therapeutic study, case-control study, Level III.

Malrotation of the fixed-bearing posterior stabilized total knee prosthesis causes a postoperative rotational mismatch between the femur and tibia.

PURPOSE: This study aimed to identify factors associated with rotational mismatch after total knee arthroplasty (TKA) using fixed-bearing posterior stabilized prosthesis and to evaluate the impact of the rotational mismatch on clinical outcomes. METHODS: This retrospective cohort study included 159 cases that underwent TKA. Whole-leg computed tomography images were obtained 2 weeks after TKA, with three-dimensional measures of alignment. Rotational alignment of the femoral and tibial components and rotational mismatch between components and between the femur and tibia bones were evaluated. The new Knee Society Score (KSS) was obtained at the final outpatient visit, which was defined as the final follow-up timepoint. Predictive factors were identified for rotational mismatch of the lower extremity and poor new KSS. RESULTS: The mean follow-up period was 42 ± 16 months. Rotational mismatch ≥ 10° between bones was identified in 56 cases (35%), with a mean mismatch angle of 5.0° ± 9.1° of external rotation of the tibia relative to the femur. Rotational mismatch ≥ 10° between components was identified in three cases (2%; mean 0.3° ± 3.6° of internal tibial rotation). A multivariate regression analysis showed that component malrotation was predictive of post-operative rotational mismatch between bones (p < 0.01) and rotational mismatch ≥ 10° associated with poor new KSS (odds ratio 4.22; p < 0.01). CONCLUSION: Malrotation of the fixed-bearing posterior stabilized TKA causes a rotational mismatch between the femur and tibia bones. Excessive rotational mismatch between bones greater than 10° is a risk factor for poor postoperative functional outcome. Precise component positioning is essential for improving TKA outcomes. LEVEL OF EVIDENCE: III.

Two-dimensional measurement misidentifies alignment outliers in total knee arthroplasty: a comparison of two- and three-dimensional measurements.

PURPOSE: Two-dimensional (2D) and three-dimensional (3D) measurements of prosthetic alignment and "outliers" after total knee arthroplasty (TKA) might not necessarily be comparable. The aim of this study was to compare the use of 2D and 3D measurements in the identification of prosthetic alignment and outliers after TKA. METHODS: This cross-sectional study included 159 consecutive TKAs. All patients underwent plain radiography, fluoroscopy-guided radiography, and computed tomography after TKA. The same baseline was used for 2D and 3D measurements. The reliability of prosthetic alignment and outlier identification (> 3° from neutral alignment) was compared between the 2D and 3D measurements. RESULTS: The mean prosthetic alignment and rate of outliers were not significantly different the between 2D and 3D measurements. The inter- and intra-observer reliabilities were higher for the 3D measurements than for the 2D measurements. The agreement between 2D and 3D measurements in outlier identification was poor, except for femoral coronal alignment. Cohen's κ coefficients were 0.19 in femoral sagittal (poor), 0.02 in tibial coronal (poor), and 0.10 in tibial sagittal (poor) on plain radiography. The values were 0.23 in tibial coronal (poor) and 0.002 in tibial sagittal (poor) on fluoroscopy-guided radiography. CONCLUSIONS: The agreement between 2D and 3D measurements in the identification of outliers was poor, even on fluoroscopy-guided radiography. Since 2D measurements have an inherent risk of misidentifying alignment outliers, this finding is clinically relevant. To properly analyze the correlation between outliers and clinical results, such as longevity, patient satisfaction, and patient-reported outcome, 3D measurements for prosthetic alignment are desirable. LEVEL OF EVIDENCE: III.

An accelerometer-based portable navigation system improved prosthetic alignment after total knee arthroplasty in 3D measurements.

PURPOSE: This study aimed to compare prosthetic alignment using three-dimensional (3D) measurements following total knee arthroplasty (TKA) performed using an accelerometer-based portable navigation system (KneeAlign2) versus the conventional technique. METHODS: A total of 159 patients who had primary osteoarthritis of the knee with varus deformity underwent TKA. The KneeAlign2 system was used for distal femoral resection and tibial resection in 78 knees, and the conventional instrumentation (intramedullary for the femur and extramedullary for the tibia) was used in 81 knees. 3D computed tomography (CT) scans of the whole leg were taken after TKA. Femoral and tibial prosthetic alignments in the coronal, sagittal, and axial planes were measured using computer software. The operation time and estimated blood loss were calculated. Deep venous thrombosis (DVT) and pulmonary embolism (PE) were evaluated using the contrast-enhanced multi-detector row CT at 1 week after TKA. RESULTS: In the femoral coronal plane, the mean and standard deviation of prosthetic alignment from neutral alignment were 1.2° [95% confidence interval (CI) 1.0°-1.4°) in the navigation group and 1.6° (95% CI 1.3°-2.0°) in the conventional group (p = 0.03). The femoral component outliers (> 3° away from the goal alignment) using the navigation system and the conventional technique were 3 and 15%, respectively, in the coronal plane (p < 0.01), and 15 and 43%, respectively, in the sagittal plane (p < 0.01). The outliers in tibial coronal and tibial sagittal planes were not statistically different between the two groups. There were no statistically significant differences between the two groups in operation time, blood loss, DVT, and PE. CONCLUSION: Using an accelerometer-based portable navigation system decreased the outliers of prosthetic alignment in femoral coronal and sagittal planes, and did not increase the complications such as operation time, blood loss, DVT, and PE. To our knowledge, this study is the first to investigate the usefulness of an accelerometer-based portable navigation system using the validated 3D measurement. LEVEL OF EVIDENCE: III.

Cup alignment in total hip arthroplasty using the muscle-sparing modified Watson-Jones approach-comparison between lateral and supine positions.

PURPOSE: The present study aimed to compare the cup alignment outliers in total hip arthroplasty (THA) using the same surgical approach with the patient in the supine position versus the lateral position. METHODS: THA using the muscle-sparing modified Watson-Jones approach was performed in 142 consecutive hips. THA was performed with the patient in the lateral position in 84 hips (lateral group) and in the supine position in 58 hips (supine group). The cup alignment was aimed at 40° inclination and 20° anteversion by referring to the mechanical alignment guide. Cup alignment and outliers (10° > aimed alignment) were assessed using post-operative 3D-CT. RESULTS: The absolute error from the aimed inclination was 6.0 ± 4.7° in the supine group and 4.2 ± 3.6° in the lateral group (p = 0.01). The absolute error from the aimed anteversion was 4.1 ± 3.2° in the supine group and 5.1 ± 3.7° in the lateral group (p = 0.12). The supine group showed a higher rate of outliers than the lateral group for the cup inclination (22% vs 5%; p < 0.01). Inclination and BMI were positively correlated in the spine position group (p < 0.01, R = 0.48), but were not correlated in the lateral position group. CONCLUSION: THA performed with the patient in the supine position has a higher risk of outliers of cup alignment compared with the lateral position, even when the same surgical approach is used. BMI affected the cup inclination in the supine position.

Effect of eldecalcitol on articular cartilage through the regulation of transcription factor Erg in a murine model of knee osteoarthritis.

Clinical studies have reported an association between low blood levels of 25-hydroxyvitamin D and the progression of osteoarthritis (OA), but the mechanism and effects of vitamin D signaling on articular chondrocytes and cartilage remains unclear. The purpose of this study was to investigate the effects of vitamin D on articular cartilage degeneration using eldecalcitol (ED-71), which is an active vitamin D3 analog. Eight-week old male C57BL/6NCrSlc mice were subjected to experimental surgery to induce OA and local treatments with 10 µL ED-71 (0.5 µg/mL) were administered weekly. Four and 12 weeks after surgery, joints were evaluated using histological scoring systems. In addition, gene expression was analyzed in chondrocytes that were isolated from wildtype neonatal mice, cultured, and treated with ED-71 (10-8 M). Joints treated with ED-71 demonstrated slowed progression of OA at 4 weeks after surgery, but few effects were observed at 12 weeks after surgery. Ets-related gene (Erg) expression was upregulated in OA articular cartilage, and further increased by ED-71 treatment. In primary chondrocytes cultured with ED-71, the gene expression of Erg and lubricin/proteoglycan 4 significantly increased, as compared to that of cells cultured without ED-71. Local treatment with ED-71 reduced degenerative changes to the articular cartilage during the early phase of experimental OA. Regulation of Erg by ED-71 in articular cartilage could confer resistance to early osteoarthritic changes.