RESUMO
A new approach to creating a new and locally nanostructured graphene-based material is reported. We studied the electric and structural properties of partially fluorinated graphene (FG) films obtained from an FG-suspension and nanostructured by high-energy Xe ions. Local shock heating in ion tracks is suggested to be the main force driving the changes. It was found that ion irradiation leads to the formation of locally thermally expanded FG and its cracking into nanoparticles with small (â¼1.5-3 nm) graphene quantum dots (GQD), embedded in them. The bandgap of GQD was estimated as 1 -1.5 eV. A further developed approach was applied to correct the functional properties of printed FG-based crossbar memristors. Dielectric FG films with small quantum dots may offer prospects in graphene-based electronics due to their stability and promising properties.
RESUMO
Porous architectures based on graphene oxide with precisely tailored nm-sized pores are attractive for biofluidic applications such as molecular sieving, DNA sequencing, and recognition-based sensing. However, the existing pore fabrication methods are complex, suffer from insufficient control over the pore density and uniformity, or are not scalable to large areas. Notably, creating vertical pores in multilayer films appears to be particularly difficult. Here, we show that uniform 6-7 nm-sized holes and straight, vertical nanochannels can be formed by simply irradiating graphene oxide (GO) films with high-energy heavy ions. Long penetration depths of energetic ions in combination with localized energy deposition and effective self-etching processes enable the creation of through pores even in 10 µm-thick GO films. This fully scalable fabrication provides a promising possibility for obtaining innovative GO track membranes.
RESUMO
A new approach based on the irradiation by heavy high energy ions (Xe ions with 26 and 167 MeV) was used for the creation of graphene quantum dots in the fluorinated matrix and the formation of the memristors in double-layer structures consisting of fluorinated graphene (FG) on polyvinyl alcohol (PVA). As a result, memristive switchings with an ON/OFF current relation ~2-4 orders of magnitude were observed in 2D printed crossbar structures with the active layer consisting of dielectric FG films on PVA after ion irradiation. All used ion energies and fluences (3 × 1010 and 3 × 1011 cm-2) led to the appearance of memristive switchings. Pockets with 103 pulses through each sample were passed for testing, and any changes in the ON/OFF current ratio were not observed. Pulse measurements allowed us to determine the time of crossbar structures opening of about 30-40 ns for the opening voltage of 2.5 V. Thus, the graphene quantum dots created in the fluorinated matrix by the high energy ions are a perspective approach for the development of flexible memristors and signal processing.
RESUMO
Herein, we investigated the influence of two types of nanoparticle fillers, i.e., amorphous SiO2 and crystalline ZrO2, on the structural properties of their nanocomposites with high-density polyethylene (HDPE). The composite films were prepared by melt-blending with a filler content that varied from 1% to 20% v/v. The composites were characterized by small- and wide-angle x-ray scattering (SAXS and WAXS), small-angle neutron scattering (SANS), Raman spectroscopy, differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). For both fillers, the nanoaggregates were evenly distributed in the polymer matrix and their initial state in the powders determined their surface roughness and fractal character. In the case of the nano-ZrO2 filler, the lamellar thickness and crystallinity degree remain unchanged over a broad range of filler concentrations. SANS and SEM investigation showed poor interfacial adhesion and the presence of voids in the interfacial region. Temperature-programmed SANS investigations showed that at elevated temperatures, these voids become filled due to the flipping motions of polymer chains. The effect was accompanied by a partial aggregation of the filler. For nano-SiO2 filler, the lamellar thickness and the degree of crystallinity increased with increasing the filler loading. SAXS measurements show that the ordering of the lamellae is disrupted even at a filler content of only a few percent. SEM images confirmed good interfacial adhesion and integrity of the SiO2/HDPE composite. This markedly different impact of both fillers on the composite structure is discussed in terms of nanoparticle surface properties and their affinity to the HDPE matrix.
RESUMO
A solid phase extraction method for removing polar tritiated contaminants from tritium-containing waste oils has been developed. The composition of the degradation products present in the waste oil was determined. The results indicated that upon exposure to tritium gas, fragment methyl ketones, carboxylic acids, and lactones were the main polar products of the mineral-based oil oxidation. The nonpolar fragmentation products included n-alkanes, monomethylalkanes, and acyclic isoprenoids and were analogous to those formed during [Formula: see text]-irradiation of the oil. Various polar and nonpolar fragmentation products containing an isoprenoid skeleton were found to be formed via an oxidative/radiation scission of long-chain acyclic isoprenoids.
RESUMO
The protective antioxidative effect of the phenolic extract (PE) isolated from Salix viminalis pyrolysis derived bio-oil was shown in vitro on the Chinese hamster ovary (CHO) cells exposed to hydrogen peroxide (H2O2). Cells pretreated with 0.05 µg/ml PE after exposure to different concentrations of H2O2 (300-900 µM) showed up to 25 % higher viability than the unpretreated ones. The antioxidative effect of PE was also observed in a time-dependent manner. The results were confirmed by visual examination of the specimens using microscopy. Finally, superoxide dismutase (SOD) activity modulation was shown by SOD assay, designed to determine the activity of enzymes removing free radicals.
Assuntos
Antioxidantes/farmacologia , Peróxido de Hidrogênio/farmacologia , Estresse Oxidativo/efeitos dos fármacos , Extratos Vegetais/farmacologia , Óleos de Plantas/química , Salix/química , Animais , Antioxidantes/isolamento & purificação , Células CHO , Sobrevivência Celular/efeitos dos fármacos , Cricetinae , Cricetulus , Relação Dose-Resposta a Droga , Fenol/química , Extratos Vegetais/isolamento & purificação , Superóxido Dismutase/metabolismoRESUMO
This article extends the application of 1,2,4-triazine-based chromogenic reagents to the detection of nonferrous metal traces left on contact with canvas and human skin. The possibility of detection of iron traces resulting from contact with objects made of stainless steel was investigated as well. Additionally, the ability of triazines to form chromatic complexes with Zn(2+), Ni(2+), Co(2+), Cu(2+), Cr(3+), and Al(3+) ions was studied spectrophotometrically. Molar absorption coefficients, ranging from 8.8 to 29.9 x 10(3)/M/cm, provide high sensitivity of 1,2,4-triazines toward nonferrous ions, thus, enabling the detection at concentrations as low as a few muM. The method was sensitive enough to detect traces resulting from a 1-min contact with a stainless steel made object, which is commonly considered as a corrosion-resistant material. The amounts of metal ions transferred to the skin after a 2-min contact with objects made of brass, zinc, and copper were sufficient to develop chromatic imprints.
Assuntos
Metais/análise , Pele/química , Medicina Legal , Humanos , Indicadores e Reagentes , Espectrofotometria , Tato , TriazinasRESUMO
The research is focused on the detection and transfer of iron traces left by iron items on clothing and human skin. The method is based on the formation of colored complexes between ferrous ions and five synthesized, mostly new triazines. Iron traces originally were left by iron rings on slightly wetted (artificial sweat) cotton fabrics and subsequently transferred to a separate textile substrate. Prior to the use of trazines the contact spots were treated with a new inorganic reducing agent (Sn(2+)) to reduce Fe(3+) to Fe(2+). The method is sensitive to detect iron traces on wetted canvas after 10 min contact with iron items. More spectacular results were obtained for traces left on human palm even after very short contact (10 sec). The new iron-trace-transfer method eliminated the contact of triazines solutions with human skin. Transmission visible spectra of Fe(II)-triazine complexes were determined.