Synthesis of Polyethyleneimines from the Manganese-Catalysed Coupling of Ethylene Glycol and Ethylenediamine.

Polyethyleneimines find many applications in products such as detergents, adhesives, cosmetics, and for processes such as tissue culture, gene therapy, and CO2 capture. The current state-of-the-art technology for the production of the branched polyethyleneimines involves aziridine feedstock which is a highly toxic, volatile and mutagenic chemical and raises significant concern to human health and environment. We report here a novel method for the synthesis of branched polyethyleneimine derivative from ethylene glycol and ethylenediamine which are much safer, environmentally benign, commercially available and potentially renewable feedstock. The polymerisation reaction is catalysed by a complex of an earth-abundant metal, manganese and liberates H2 O as the only by-product. Our mechanistic studies using a combination of DFT computation and experiment suggest that the reaction proceeds by the formation and subsequent hydrogenation of imine intermediates.

Elucidating the structural basis for the enhanced antifungal activity of amide derivative against Candida albicans: a comprehensive computational investigation.

The continuous search for more effective options against well-known pathogens such as Candida albicans remains the rationale for the search for novel lead compounds from various sources. This study aims to investigate the chemical structure, chemical properties, of 5-(2-((5-(((1S,3R) -3-(5-acetamido-1,3,4-thiadiazolidin-2-yl) cyclopentyl) methyl)-1,3,4-thiadiazolidin-2-yl)amino)-2-oxoethyl)-2-methyl-2,3-dihydro-1H-pyrazol-3-ide designated ATCTP using DFT method ωB97XD/-311 + + g(2d, 2p) and the biological potential of compound ATCTP against Candida albicans using molecular docking and ADMET studies. Geometry optimization was carried out in DMSO, ethanol. gas and water revealing minute discrepancies in bond length and wider differences in bond angles. Frontier molecular orbital investigations reveal HOMO-LUMO energy gap magnitude in decreasing order of ATCTP_Gas > ATCTP_Water > ATCTP_ethanol > ATCTP_DMSO inferring that water influences chemical stability of the compound the most compared to ethanol and DMSO. Density of state investigations have revealed electron density contributions at corresponding energy peaks. In silico pharmacokinetic predicts ATCTP not to be cytotoxic, hepatotoxic, immunotoxic or mutagenic but probable mutagen. Molecular docking investigation of ATCTP against aspartic proteinase of Candida albicans (ID: 2QZX) in comparison with standard drug Fluconazole. Compound ATCTP had higher binding affinity (- 8.1 kcal/mol) compared to that of the standard drug fluconazole (- 5.6 kcal/mol) which records 4 conventional hydrogen interactions compared to 2 formed in the interaction of ATCTP + 2QZX. ATCTP also reports binding affinity of - 7.2 kcal/mol which reportedly surpassed that of 2QZX interaction with fluconazole (- 5.7 kcal/mol). ATCTP binds with lanosterol14-α-demethylase (5v5z) with binding affinity of - 9.7 kcal/mol binding to active site amino acid residues of the protein compared to fluconazole + 5v5z (- 8.0 kcal/mol). ATCTP is therefore recommended to be a lead compound for the possible design of a new and more effective anti-candida therapeutic compound.

Interaction of 5-Fluorouracil on the Surfaces of Pristine and Functionalized Ca12O12 Nanocages: An Intuition from DFT.

The utilization of nanostructured materials for several biomedical applications has tremendously increased over the last few decades owing to their nanosizes, porosity, large surface area, sensitivity, and efficiency as drug delivery systems. Thus, the incorporation of functionalized and pristine nanostructures for cancer therapy offers substantial prospects to curb the persistent problems of ineffective drug administration and delivery to target sites. The potential of pristine (Ca12O12) and formyl (-CHO)- and amino (-NH2)-functionalized (Ca12O12-CHO and Ca12O12-NH2) derivatives as efficient nanocarriers for 5-fluorouracil (5FU) was studied at the B3LYP-GD3(BJ)/6-311++G(d,p) theoretical level in two electronic media (gas and solvent). To effectively account for all adsorption interactions of the drug on the investigated surfaces, electronic studies as well as topological analysis based on the quantum theory of atoms in molecules (QTAIM) and noncovalent interactions were exhaustively utilized. Interestingly, the obtained results divulged that the 5FU drug interacted favorably with both Ca12O12 and its functionalized derivatives. The adsorption energies of pristine and functionalized nanostructures were calculated to be -133.4, -96.9, and -175.6 kcal/mol, respectively, for Ca12O12, Ca12O12-CHO, and Ca12O12-NH2. Also, both topological analysis and NBO stabilization analysis revealed the presence of interactions among O3-H32, O27-C24, O10-C27, and N24-H32 atoms of the drug and the surface. However, 5FU@Ca12O12-CHO molecules portrayed the least adsorption energy due to considerable destabilization of the molecular complex as revealed by the computed deformation energy. Therefore, 5FU@Ca12O12 and 5FU@Ca12O12-NH2 acted as better nanovehicles for 5FU.

Heteroatoms (Si, B, N, and P) doped 2D monolayer MoS2 for NH3 gas detection.

2D transition metal dichalcogenide MoS2 monolayer quantum dots (MoS2-QD) and their doped boron (B@MoS2-QD), nitrogen (N@MoS2-QD), phosphorus (P@MoS2-QD), and silicon (Si@MoS2-QD) surfaces have been theoretically investigated using density functional theory (DFT) computation to understand their mechanistic sensing ability, such as conductivity, selectivity, and sensitivity toward NH3 gas. The results from electronic properties showed that P@MoS2-QD had the lowest energy gap, which indicated an increase in electrical conductivity and better adsorption behavior. By carrying out comparative adsorption studies using m062-X, ωB97XD, B3LYP, and PBE0 methods at the 6-311G++(d,p) level of theory, the most negative values were observed from ωB97XD for the P@MoS2-QD surface, signifying the preferred chemisorption surface for NH3 detection. The mechanistic studies provided in this study also indicate that the P@MoS2-QD dopant is a promising sensing material for monitoring ammonia gas in the real world. We hope this research work will provide informative knowledge for experimental researchers to realize the potential of MoS2 dopants, specifically the P@MoS2-QD surface, as a promising candidate for sensors to detect gas.

Computational design and molecular modeling of the interaction of nicotinic acid hydrazide nickel-based complexes with H2S gas.

The application of nickel complexes of nicotinic acid hydrazide ligand as a potential gas-sensor and adsorbent material for H2S gas was examined using appropriate density functional theory (DFT) calculations with the ωB97XD/Gen/6-311++G(d,p)/LanL2DZ method. The FT-IR spectrum of the synthesized ligand exhibited a medium band at 3178 cm-1 attributed to ν(NH) stretching vibrations and strong bands at 1657 and 1600 cm-1 corresponding to the presence of ν(C[double bond, length as m-dash]O) and ν(C[double bond, length as m-dash]N) vibration modes. In the spectrum of the nickel(ii) complex, the ν(C[double bond, length as m-dash]O) and ν(C[double bond, length as m-dash]N) vibration bands experience negative shifts to 1605 cm-1 and 1580 cm-1, respectively, compared to the ligand. This indicates the coordination of the carbonyl oxygen and the azomethine nitrogen atoms to the Ni2+ ion. Thus, the sensing mechanism of the complexes indicated a short recovery time and that the work function value increases for all complexes, necessitating an excellent H2S gas sensor material. Thus, a profound assertion was given that the complex sensor surfaces exhibited very dense stability with regards to their relevant binding energies corresponding to various existing studies.

Assessing the Performance of Al12N12 and Al12P12 Nanostructured Materials for Alkali Metal Ion (Li, Na, K) Batteries.

This study focused on the potential of aluminum nitride (Al12N12) and aluminum phosphide (Al12P12) nanomaterials as anode electrodes of lithium-ion (Li-ion), sodium-ion (Na-ion), and potassium-ion (K-ion) batteries as investigated via density functional theory (DFT) calculations at PBE0-D3, M062X-D3, and DSDPBEP86 as the reference method. The results show that the Li-ion battery has a higher cell voltage with a binding energy of -1.210 eV and higher reduction potential of -6.791 kcal/mol compared to the sodium and potassium ion batteries with binding energies of -0.749 and -0.935 eV and reduction potentials of -6.414 and -6.513 kcal/mol, respectively, using Al12N12 material. However, in Al12P12, increases in the binding energy and reduction potential were observed in the K-ion battery with values -1.485 eV and -7.535 kcal/mol higher than the Li and Na ion batteries with binding energy and reduction potential -1.483, -1.311 eV and -7.071, -7.184 eV, respectively. Finally, Al12N12 and Al12P12 were both proposed as novel anode electrodes in Li-ion and K-ion batteries with the highest performances.