RESUMO
In this paper, we present the effect of micron size holes on proliferation and growth of human aortic endothelial cells (HAECs). Square shaped micron size holes (5, 10, 15, 20 and 25 µm) separated by 10 µm wide struts are fabricated on 5 µm thick sputter deposited Nitinol films. HAECs are seeded onto these micropatterned films and analyzed after 30 days with fluorescence microscopy. Captured images are used to quantify the nucleus packing density, size, and aspect ratio. The films with holes ranging from 10 to 20 µm produce the highest cell packing densities with cell nucleus contained within the hole. This produces a geometrically regular grid like cellular distribution pattern. The cell nucleus aspect ratio on the 10-20 µm holes is more circular in shape when compared to aspect ratio on the continuous film or larger size holes. Finally, the 25 µm size holes prevented the formation of a continuous cell monolayer, suggesting the critical length that cells cannot bridge is between 20 to 25 µm.
Assuntos
Ligas/farmacologia , Aorta/citologia , Técnicas de Cultura de Células/métodos , Células Endoteliais/citologia , Células Endoteliais/efeitos dos fármacos , Adesão Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Humanos , Propriedades de SuperfícieRESUMO
The performance of ultrasonic transducers is largely determined by the piezoelectric properties and geometries of their active elements. Due to the brittle nature of piezoceramics, existing processing tools for piezoelectric elements only achieve simple geometries, including flat disks, cylinders, cubes and rings. While advances in additive manufacturing give rise to free-form fabrication of piezoceramics, the resultant transducers suffer from high porosity, weak piezoelectric responses, and limited geometrical flexibility. We introduce optimized piezoceramic printing and processing strategies to produce highly responsive piezoelectric microtransducers that operate at ultrasonic frequencies. The 3D printed dense piezoelectric elements achieve high piezoelectric coefficients and complex architectures. The resulting piezoelectric charge constant, d33, and coupling factor, kt, of the 3D printed piezoceramic reach 583 pC/N and 0.57, approaching the properties of pristine ceramics. The integrated printing of transducer packaging materials and 3D printed piezoceramics with microarchitectures create opportunities for miniaturized piezoelectric ultrasound transducers capable of acoustic focusing and localized cavitation within millimeter-sized channels, leading to miniaturized ultrasonic devices that enable a wide range of biomedical applications.
RESUMO
Programming magnetic fields with microscale control can enable automation at the scale of single cells ≈10 µm. Most magnetic materials provide a consistent magnetic field over time but the direction or field strength at the microscale is not easily modulated. However, magnetostrictive materials, when coupled with ferroelectric material (i.e., strain-mediated multiferroics), can undergo magnetization reorientation due to voltage-induced strain, promising refined control of magnetization at the micrometer-scale. This work demonstrates the largest single-domain microstructures (20 µm) of Terfenol-D (Tb0.3 Dy0.7 Fe1.92 ), a material that has the highest magnetostrictive strain of any known soft magnetoelastic material. These Terfenol-D microstructures enable controlled localization of magnetic beads with sub-micrometer precision. Magnetically labeled cells are captured by the field gradients generated from the single-domain microstructures without an external magnetic field. The magnetic state on these microstructures is switched through voltage-induced strain, as a result of the strain-mediated converse magnetoelectric effect, to release individual cells using a multiferroic approach. These electronically addressable micromagnets pave the way for parallelized multiferroics-based single-cell sorting under digital control for biotechnology applications.
Assuntos
Campos MagnéticosRESUMO
PURPOSE: Prior studies demonstrating the ability to lengthen intestinal segments with mechanical force required devices with extracorporeal components. The feasibility of using a completely implantable device for in vivo intestinal lengthening was evaluated in this study. METHODS: Biocompatible Nitinol springs capable of 5-fold expansions were compressed using absorbable sutures and were implanted into isolated segments of proximal jejunum in rats. Springs compressed with nonabsorbable sutures served as controls. The animals were observed with serial abdominal x-rays until the springs became fully expanded. Intestinal segments were then retrieved for histologic analysis. Two-tailed and paired Student's t tests were used for statistical analysis. RESULTS: Intestinal segments were successfully lengthened in the experimental group from 1.3 +/- 0.3 cm to 4.4 +/- 0.5 cm (P < .001). Maximum spring length was achieved on postoperative day 36 (range, 16-50 days). In the control group, there was also an increase in intestinal lengths, from 1.6 +/- 0.04 cm to 2.9 +/- 0.4 cm (P < .001) (Fig. 4). In percentages, a 250% increase in length was observed in the experimental group vs an 85% increase in the control group (P < .001). Microscopic evaluation of both control and experimental segments revealed gross preservation of intestinal architecture; however, muscular layer hypertrophy and villous atrophy were noted. CONCLUSIONS: Continuous mechanical force with an implantable spring successfully lengthened isolated segments of small bowel in an animal model. Although similar results have been demonstrated using other devices, the current device is totally implantable and may be deployed endoscopically.
Assuntos
Procedimentos Cirúrgicos do Sistema Digestório/instrumentação , Jejuno/cirurgia , Síndrome do Intestino Curto/cirurgia , Expansão de Tecido/instrumentação , Ligas , Animais , Procedimentos Cirúrgicos do Sistema Digestório/métodos , Endoscopia Gastrointestinal , Estudos de Viabilidade , Jejuno/anatomia & histologia , Modelos Animais , Próteses e Implantes , Ratos , Stents , Expansão de Tecido/métodos , Dispositivos para Expansão de Tecidos/estatística & dados numéricosRESUMO
Interventionalists in many specialties have the need for improved, low profile covered stents. Thin films of nitinol (<5-10 microns) could be used to improve current covered stent technology. A "hot target" sputter deposition technique was used to create thin films of nitinol for this study. Covered stents were created from commercially available balloon-inflatable and self-expanding stents. Stents were deployed in a laboratory flow loop and in four swine. Uncovered stent portions served as controls. Postmortem examinations were performed 2-6 weeks after implantation. In short-term testing, thin film nitinol covered stents deployed in the arterial circulation showed no intimal proliferation and were easily removed from the arterial wall postmortem. Scanning electron microscopy showed a thin layer of endothelial cells on the thin film, which covered the entire film by 3 weeks. By contrast, significant neointimal hyperplasia occurred on the luminal side of stents deployed in the venous circulation. Extremely low-profile covered stents can be manufactured using thin films of nitinol. Although long-term studies are needed, thin film nitinol may allow for the development of low-profile, nonthrombogenic covered stents.