In Situ Monitoring of Competitive Coformer Exchange Reaction by 1H MAS Solid-State NMR.

In a competitive coformer exchange reaction, a recent topic of interest in pharmaceutical research, the coformer in a pharmaceutical cocrystal is exchanged with another coformer that is expected to form a cocrystal that is more stable. There will be a competition between coformers to form the most stable product through the formation of hydrogen bonds. This will cause destabilization of the pharmaceutical products during processing or storage. Therefore, it is important to develop a mechanistic understanding of this transformation by monitoring each and every step of the reaction, employing a technique such as 1H nuclear magnetic resonance (NMR). In this study, an in situ monitoring of a coformer exchange reaction is carried out by 1H magic angle spinning (MAS) solid-state NMR (SSNMR) at a spinning frequency of 60 kHz. The changes in caffeine maleic acid cocrystals on addition of glutaric acid and caffeine glutaric cocrystals on addition of maleic acid were monitored. In all of the reactions, it has been observed that caffeine glutaric acid Form I is formed. When glutaric acid was added to 2:1 caffeine maleic acid, the formation of metastable 1:1 caffeine glutaric acid Form I was observed at the start of the experiment, indicating that the centrifugal pressure is enough for the formation. The difference in the end product of the reactions with a similar reaction pathway of 1:1 and 2:1 reactant stoichiometry indicates that a complete replacement of maleic acid has occurred only in the 1:1 stoichiometry of the reactants. The polymorphic transition of caffeine glutaric acid Form II to Form I at higher temperatures was a crucial reason that triggered the exchange of glutaric acid with maleic acid in the reaction of caffeine glutaric acid and maleic acid. Our results are novel since the new reaction pathways in competitive coformer exchange reactions enabled understanding the remarkable role of stoichiometry, polymorphism, temperature, and centrifugal pressure.

A critical review of Pongamia pinnata multiple applications: From land remediation and carbon sequestration to socioeconomic benefits.

Pongamia pinnata (L.) Pierre (Pongamia) is a tree native to Southeast Asia. Recently, interest in Pongamia focused on its potential as a biofuel source as its seeds contain around 40% oil. However, Pongamia has multiple applications beyond biofuel production. It is a legume, can form symbiotic associations with mycorrhizal fungi, has been shown to be tolerant to drought, salinity, and heavy metals in soil, and has potential to mitigate climate change. Additionally, Pongamia oil has medicinal properties, can be used as biopesticide, insect repellent, to produce soap, and as a source of edible grade vegetable oil. The seed cake can be used as a source of bioenergy, food and feed protein, and organic fertiliser, and the flowers are a good source of pollen and nectar. Pongamia can also bring socio-economic benefits as its ability to restore degraded and contaminated land provides opportunities for local communities through novel valorisation pathways. These multiple applications have potential to form part of a circular bioeconomy in line with sustainable development goals. Although research on the multiple applications of Pongamia has grown considerably, knowledge gaps remain and these need to be addressed so that the full potential of Pongamia can be achieved. Further understanding of the mechanisms underlying its resilience to abiotic stresses, phytoremediation potential and biotic interactions should be a priority, and co-ordinated breeding efforts will be key. Here, we critically review the available literature on Pongamia and highlight gaps in knowledge in which future research should focus on to ensure that the full potential of this versatile tree can be achieved. We conclude that Pongamia can potentially form part of a circular bioeconomy and that harnessing the multiple applications of Pongamia in a holistic manner, with collaboration among key stakeholders, is crucial for the successful application of its benefits far beyond biofuel production.

Fatty Acid Analysis, Chemical Constituents, Biological Activity and Pesticide Residues Screening in Jordanian Propolis.

Propolis is a resinous natural product collected by honeybees (Apis mellifera and others) from tree exudates that has been widely used in folk medicine. The present study was carried out to investigate the fatty acid composition, chemical constituents, antioxidant, and xanthine oxidase (XO) inhibitory activity of Jordanian propolis, collected from Al-Ghour, Jordan. The hexane extract of Jordanian propolis contained different fatty acids, which are reported for the first time by using GC-FID. The HPLC was carried out to identify important chemical constituents such as fatty acids, polyphenols and α-tocopherol. The antioxidant and xanthine oxidase inhibitory activities were also monitored. The major fatty acid identified were palmitic acid (44.6%), oleic acid (18:1∆9cis, 24.6%), arachidic acid (7.4%), stearic acid (5.4%), linoleic acid (18:2∆9-12cis, 3.1%), caprylic acid (2.9%), lignoceric acid (2.6%), cis-11,14-eicosaldienoic acid (20:2∆11-14cis, 2.4%), palmitoleic acid (1.5%), cis-11-eicosenoic acid (1.2%), α-linolenic acid (18:3∆9-12-15cis, 1.1%), cis-13,16-docosadienoic acid (22:2∆13-16cis, 1.0%), along with other fatty acids. The major chemical constituents identified using gradient HPLC-PDA analysis were pinocembrin (2.82%), chrysin (1.83%), luteolin-7-O-glucoside (1.23%), caffeic acid (1.12%), caffeic acid phenethyl ester (CAPE, 0.79%), apigenin (0.54%), galangin (0.46%), and luteolin (0.30%); while the minor constituents were hesperidin, quercetin, rutin, and vanillic acid. The percentage of α-tocopherol was 2.01 µg/g of the lipid fraction of propolis. Antioxidant properties of the extracts were determined via DPPH radical scavenging. The DPPH radical scavenging activities (IC50) of different extracts ranged from 6.13 to 60.5 µg/mL compared to ascorbic acid (1.21 µg/mL). The xanthine oxidase inhibition (IC50) ranged from 75.11 to 250.74 µg/mL compared to allopurinol (0.38 µg/mL). The results indicate that the various flavonoids, phenolic compounds, α-tocopherol, and other constituents which are present in propolis are responsible for the antioxidant and xanthine oxidation inhibition activity. To evaluate the safety studies of propolis, the pesticide residues were also monitored by LC-MS-MS 4500 Q-Trap. Trace amounts of pesticide residue (ng/mL) were detected in the samples, which are far below the permissible limit as per international guidelines.

Determination of Phenolic Compounds in Various Propolis Samples Collected from an African and an Asian Region and Their Impact on Antioxidant and Antibacterial Activities.

The biological activities of propolis samples are the result of many bioactive compounds present in the propolis. The aim of the present study was to determine the various chemical compounds of some selected propolis samples collected from Palestine and Morocco by the High-Performance Liquid Chromatography-Photodiode Array Detection (HPLC-PDA) method, as well as the antioxidant and antibacterial activities of this bee product. The chemical analysis of propolis samples by HPLC-PDA shows the cinnamic acid content in the Palestinian sample is higher compared to that in Moroccan propolis. The results of antioxidant activity demonstrated an important free radical scavenging activity (2,2-Diphenyl-1-picrylhydrazyl (DPPH); 2,2'-azino-bis 3-ethylbenzothiazoline-6-sulphonic acid (ABTS) and reducing power assays) with EC50 values ranging between 0.02 ± 0.001 and 0.14 ± 0.01 mg/mL. Additionally, all tested propolis samples possessed a moderate antibacterial activity against bacterial strains. Notably, Minimum Inhibitory Concentrations (MICs) values ranged from 0.31 to 2.50 mg/mL for Gram-negative bacterial strains and from 0.09 to 0.125 mg/mL for Gram-positive bacterial strains. The S2 sample from Morocco and the S4 sample from Palestine had the highest content of polyphenol level. Thus, the strong antioxidant and antibacterial properties were apparently due to the high total phenolic and flavone/flavonol contents in the samples. As a conclusion, the activities of propolis samples collected from both countries are similar, while the cinnamic acid in the Palestinian samples was more than that of the Moroccan samples.

Nicotinamide extrudates as novel anti-aging and collagen promoting platform: a comparative cosmeceutical study versus the gel form.

The objective of the study was to explore the potential of a novel nicotinamide extrudate as an anti-aging platform compared to the conventional gel. Nicotinamide extrudates were prepared by hot melt extrusion and characterized pharmaceutically for their thermal behavior, mositure uptake, skin adhesion, and deposition in different skin layers. The pharmacological potential of the extrudates was explored in terms of induction of skin amino acids, cellular energy estimation, 8-hydroxy-2-deoxyguanosine content, Nitrate + nitrite content and histological chacaterization of collagen area percent. Results revealed that the extrusion technique managed to amorphize nicotinamide and enhance its skin deposition (46%) compared to the gel form which only showed about 10% deposition, owing to the mucoadhesive nature of the former. Extrudates were also found superior to the gel form as demonstrated by the increased amino acids level (glycine, proline, hydroxyproline), increased cellular energy, decreased oxidative stress and increased collagen formation. Nictotinamide extrudates were proven to be a scalable promising anti-aging platform which are worthy of entering the cosmeceutical market as products.

Mechanism of Hydrogen-Bonded Complex Formation between Ibuprofen and Nanocrystalline Hydroxyapatite.

Nanocrystalline hydroxyapatite (nanoHA) is the main hard component of bone and has the potential to be used to promote osseointegration of implants and to treat bone defects. Here, using active pharmaceutical ingredients (APIs) such as ibuprofen, we report on the prospects of combining nanoHA with biologically active compounds to improve the clinical performance of these treatments. In this study, we designed and investigated the possibility of API attachment to the surface of nanoHA crystals via the formation of a hydrogen-bonded complex. The mechanistic studies of an ibuprofen/nanoHA complex formation have been performed using a holistic approach encompassing spectroscopic (Fourier transform infrared (FTIR) and Raman) and X-ray diffraction techniques, as well as quantum chemistry calculations, while comparing the behavior of the ibuprofen/nanoHA complex with that of a physical mixture of the two components. Whereas ibuprofen exists in dimeric form both in solid and liquid state, our study showed that the formation of the ibuprofen/nanoHA complex most likely occurs via the dissociation of the ibuprofen dimer into monomeric species promoted by ethanol, with subsequent attachment of a monomer to the HA surface. An adsorption mode for this process is proposed; this includes hydrogen bonding of the hydroxyl group of ibuprofen to the hydroxyl group of the apatite, together with the interaction of the ibuprofen carbonyl group to an HA Ca center. Overall, this mechanistic study provides new insights into the molecular interactions between APIs and the surfaces of bioactive inorganic solids and sheds light on the relationship between the noncovalent bonding and drug release properties.

Ultrasound-assisted preparation of novel ibuprofen-loaded excipient with improved compression and dissolution properties.

CONTEXT: Most of the active pharmaceutical ingredients (APIs) suffer from a drawback of poor aqueous solubility. In addition to the same, some APIs show poor tabletting behavior creating problems in formulation development. Crystal engineering can be an efficient tool in rectification of such problems associated with the APIs. Thus present work deals with crystallization of ibuprofen (a model drug) onto the surface of dicalcium phosphate (DCP) particles using different techniques. OBJECTIVE: The objective of the present work was to prepare ibuprofen-loaded DCP particles and further to analyze them for compressibility and dissolution behavior. MATERIALS AND METHODS: Various crystallization techniques such as solvent evaporation (SE), melt crystallization (MC), melt sonocrystallization (MSC), antisolvent crystallization (AC), and antisolvent sonocrystallization (ASC) were screened for the preparation of ibuprofen-loaded DCP. Products obtained from different techniques were analyzed for physicochemical, micromeritic and compression properties. RESULTS AND DISCUSSION: ASC technique was found to be suitable for preparing directly compressible ibuprofen-loaded DCP particles. The change in the crystal habit (needle to plate shape) of ibuprofen and its crystallization in miniscular form onto the surface of DCP particles showed significant improvement in the dissolution rate and compression properties of ibuprofen due to an increase in specific surface area when compared with ibuprofen crystallized by other techniques. Additionally, the tablets prepared from ASC powder did not require binder since ibuprofen acted as melt binder during compression. CONCLUSION: Directly compressible ibuprofen-loaded DCP particles can serve as an alternative for conventional ibuprofen tablets prepared by wet granulation technique.

Design, synthesis and pharmacological evaluation of pyrimidobenzothiazole-3-carboxylate derivatives as selective L-type calcium channel blockers.

L-type voltage gated calcium channels play essential role in contraction of various skeletal and vascular smooth muscles, thereby plays important role in regulating blood pressure. Dihydropyridine receptors have been targeted for development of newer antihypertensive agents, one of the structurally analogs nucleus dihydropyrimidines have been reported earlier by us as a potential agent toward development of calcium channel modulator. A pre-synthetic QSAR was run and on the basis of structure activity relationship a series of twenty three molecules was synthesized and studied by myosin light chain kinase assay (MLCK), Angiotensin Converting Enzyme (ACE) colorimetric assay, non-invasive blood pressure (NIBP) and invasive blood pressure (IBP) methods. Molecules with significant efficacy were studied for their single crystal X-ray diffraction, molecular docking, molecular dynamics and post-synthetic QSAR. The NIBP and IBP methods screened molecules with better percentage inhibition versus time compared to standard drug Nifedipine. The lead compound ethyl 2-methyl-4-(3-nitrophenyl)-4H-pyrimido [2,1-b] [1,3] benzothiazole-3-carboxylate (26) presented a triclinic structure with polymeric chain packing in lattice. 26 exhibited IC50 on MLCK assay of 2.1±1.7 µM with selectivity of L-type calcium channels and comparative to Nifedipine. It offered satisfactory physicochemical properties with partition coefficient of (ClogP) 4.64. Its pharmacokinetic profile is also good with Cmax at 0.40 µg/ml by oral route with Tmax reaching in 0.5 h which means in 30 min. 26 also exhibits superior t1/2 of 5.4 h and oral bioavailability of (F) 56.75% with an AUC0-∞ of 0.84 µg h/ml. Molecular docking studies indicates toward the interaction of lead compound via hydrogen bonds with Lys144, Glu181 and Asp183, it forms the Van der Walls interactions with Ser18, Asp20, Asn187, Pro185, Glu180, Glu181 and Arg10 with Glide score and Glide energy to be -3.602 and -47.098, respectively. Post-synthetic QSAR of newly synthesized molecules indicates toward improvement with respect to steric descriptor which contributed negatively in former series.

Exploring Microstructural Changes in Structural Analogues of Ibuprofen-Hosted In Situ Gelling System and Its Influence on Pharmaceutical Performance.

The present work explores inner structuration of in situ gelling system consisting of glyceryl monooleate (GMO) and oleic acid (OA). The system under study involves investigation of microstructural changes which are believed to govern the pharmaceutical performance of final formulation. The changes which are often termed mesophasic transformation were analysed by small angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), rheology and plane polarised light (PPL) microscopy. The current work revealed transformation of blank system from W/O emulsion to reverse hexagonal structure upon addition of structural analogues of ibuprofen. Such transformations are believed to occur due to increased hydrophobic volume within system as probed by SAXS analysis. The findings of SAXS studies were well supported by DSC, rheology and PPL microscopy. The study established inverse relationship between log P value of structural analogues of ibuprofen and the degree of binding of water molecules to surfactant chains. Such relationship had pronounced effect on sol-gel transformation process. The prepared in situ gelling system showed sustained drug release which followed Higuchi model.

Mapping ion-induced mesophasic transformation in lyotropic in situ gelling system and its correlation with pharmaceutical performance.

PURPOSE: To investigate influence of ion induced mesophasic transformation on pharmaceutical performance of in situ gelling system consisting of glyceryl monooleate. METHODS: The prepared system showed mesophasic transformation during its conversion from sol to gel upon controlled hydration. The process of mesophasic transformation was studied by SAXS, DSC, rheology and plane polarized light microscopy. Further the influence of additives i.e. naproxen salts (sodium and potassium) and naproxen (base) on the process of mesophasic transformation was also elucidated. RESULTS: It was observed that addition of salt form of naproxen transformed W/O emulsions into cubic mesophase whereas addition of base form of naproxen formed reverse hexagonal (HII) phase upon controlled hydration. The cubic mesophase formed by naproxen salts retarded the drug release for initial 3 h whereas HII phase showed sustained drug release characteristics for naproxen base following Higuchi drug release kinetics. CONCLUSION: The current work suggests that formulations with tailor made pharmaceutical performance can be developed by selecting proper additives in the system so as to obtain the desired mesophase 'on demand' thereby controlling drug release characteristics.

Effect of cocrystallization techniques on compressional properties of caffeine/oxalic acid 2:1 cocrystal.

CONTEXT: Caffeine/oxalic acid 2:1 cocrystal exhibited superior stability to humidity over caffeine, but compressional behavior is not studied yet. OBJECTIVE: To compare compressional properties of caffeine/oxalic acid 2:1 cocrystal obtained by different cocrystallization techniques. MATERIALS AND METHODS: Cocrystal was obtained by solvent precipitation and ultrasound assisted solution cocrystallization (USSC) and characterized by X-ray powder diffraction and scanning electron microscopy. Compaction study was carried out at different compaction forces. Compact crushing strength, thickness and elastic recovery were determined. RESULTS AND DISCUSSION: Compaction was in order, caffeine > solvent precipitation cocrystal > USSC cocrystal. Caffeine exhibited sticking and lamination, where solvent precipitation compacts showed advantage. Caffeine and solvent precipitation compacts showed sudden drop in compactability, higher elastic recovery with severe lamination at 20,000 N. This was due to overcompaction. Crystal habit of two cocrystal products was same, but USSC cocrystals were difficult to compact. Uniform needle shaped USSC cocrystals must be difficult to orient in different direction and fracture during compression. Elastic recovery of USSC cocrystals was also more compared to other powders indicating less fracture and poor bonding between particles resulting in poor compaction. CONCLUSION: Cocrystal formation did not improve compressional property of caffeine. Cocrystals exposed to different crystallization environments in two techniques may have resulted in generation of different surface properties presenting different compressional properties.

A quality by design approach using artificial intelligence techniques to control the critical quality attributes of ramipril tablets manufactured by wet granulation.

Quality by design (QbD) is an essential part of the modern approach to pharmaceutical quality. This study was conducted in the framework of a QbD project involving ramipril tablets. Preliminary work included identification of the critical quality attributes (CQAs) and critical process parameters (CPPs) based on the quality target product profiles (QTPPs) using the historical data and risk assessment method failure mode and effect analysis (FMEA). Compendial and in-house specifications were selected as QTPPs for ramipril tablets. CPPs that affected the product and process were used to establish an experimental design. The results thus obtained can be used to facilitate definition of the design space using tools such as design of experiments (DoE), the response surface method (RSM) and artificial neural networks (ANNs). The project was aimed at discovering hidden knowledge associated with the manufacture of ramipril tablets using a range of artificial intelligence-based software, with the intention of establishing a multi-dimensional design space that ensures consistent product quality. At the end of the study, a design space was developed based on the study data and specifications, and a new formulation was optimized. On the basis of this formulation, a new laboratory batch formulation was prepared and tested. It was confirmed that the explored formulation was within the design space.

Probing influence of mesophasic transformation on performance of self-emulsifying system: effect of ion.

Self-emulsifying systems are mixtures of oils and surfactants, ideally isotropic, sometimes including cosolvents, which emulsify under conditions of gentle agitation, similar to those which would be encountered in the gastrointestinal tract. The process of self-emulsification has remained the center of attraction for most researchers. Controlled hydration of self-emulsifying systems shows formation of an intermediate gel phase which upon rupture forms an emulsion. Current work was undertaken to understand and explore the microstructural properties of intermediate gel phase which are believed to influence the performance (droplet size) of the final formulation. The effect of additives on microstructural properties of intermediate gel phase has also been investigated. Microstructural elucidation of hydrated samples of intermediate regimes was done by using techniques such as small angle X-ray scattering, differential scanning calorimetry and rheology. Samples from intermediate regimes showed formation of local lamellar structure which swelled with hydration. In the present work, the effect of addition of salt form of naproxen (sodium and potassium) and naproxen (base) on microstructural properties of intermediate regimes was investigated. Systems containing naproxen salts formed larger droplets whereas naproxen base formed smaller ones. Microstructural properties of intermediate lamellar structures were well correlated with performance of the final formulation. The current studies indicate that by controlling the properties of intermediate regimes optimized formulations with desired performance can be tailor-made.

Microstructural elucidation of self-emulsifying system: effect of chemical structure.

PURPOSE: Self-emulsifying systems (SES) emulsify spontaneously to produce fine oil-in-water emulsion when introduced into aqueous phase. The self-emulsification process plays an important role during formation of emulsion. The objective of current work was to understand and explore the inner structuration of SES through controlled hydration and further to study the influence of additive on the same which ultimately governs performance of final formulation in terms of droplet size. METHODS: Droplet size of final formulations containing structural analogues of ibuprofen was determined. Microstructural properties of intermediate hydrated regimes of SES were investigated using techniques such as small angle X-ray scattering, differential scanning calorimetry and rheology. RESULTS: The current work established inverse relationship between droplet size of the formulations containing structural analogues of ibuprofen and their Log P values. Microstructural analysis of intermediate hydrated regimes of the prepared samples showed formation of local lamellar structure. Structural analogues of ibuprofen significantly altered microstructure of lamellae which was well correlated with the droplet size of final formulations. In vitro drug release study showed increase in dissolution rate of lipophillic drugs when formulated as SES. CONCLUSION: The current work emphasizes the fact that tailor-made formulations can be prepared by controlling the properties of intermediate regimes.

Reduced ulcerogenic potential and antiarthritic effect of chitosan-naproxen sodium complexes.

The purpose of this research was to address the utility of naproxen sodium-chitosan spray-dried complexes for antiulcer and antiarthritic activities. The cold stress technique was used to examine the ulcerogenic potential of naproxen sodium (NPX) and spray-dried formulations in the different doses. The ulcerations reduced with the dose of spray-dried complexes of naproxen sodium and chitosan. The conspicuous hemorrhagic lesions were visible in the morphological features of the animal treated with naproxen 50 mg/kg (p.o.). Thus, the results suggest that the spray-dried naproxen sodium-chitosan complex (NPXF) was not corrosive to the gastric mucosa at high doses of 50, 100, and 200 mg/kg (p.o.) under stressful conditions. It is evident from the present investigation that NPXF does not possess any ulcerogenic potential in comparison to naproxen which, under stressful conditions, led to the hypersecretion of HCl, culminating to petichial hemorrhages in the gastric mucosa of the animals. The biphasic pattern was observed in the various arthritic parameters. The rise in paw volume, joint diameter, WBC count, arthritis score, and fall in body weight was significantly ameliorated in the animals treated with NPXF (5, 10, and 20 mg/kg, p.o). At the end of the study, slight erythema was visible in the naproxen-treated animals. However, no erythema, redness, or ulcers were visible in the animals treated with NPXF. Thus, the direct compression properties and reduced ulcerogenic activity, combined with the demonstrated solubilizing power and analgesic effect enhancer ability toward the drug, make naproxen sodium-chitosan spray-dried complexes particularly suitable for developing a reduced-dose, fast-release, solid oral dosage form of naproxen.

Quality by design approach: application of artificial intelligence techniques of tablets manufactured by direct compression.

The publication of the International Conference of Harmonization (ICH) Q8, Q9, and Q10 guidelines paved the way for the standardization of quality after the Food and Drug Administration issued current Good Manufacturing Practices guidelines in 2003. "Quality by Design", mentioned in the ICH Q8 guideline, offers a better scientific understanding of critical process and product qualities using knowledge obtained during the life cycle of a product. In this scope, the "knowledge space" is a summary of all process knowledge obtained during product development, and the "design space" is the area in which a product can be manufactured within acceptable limits. To create the spaces, artificial neural networks (ANNs) can be used to emphasize the multidimensional interactions of input variables and to closely bind these variables to a design space. This helps guide the experimental design process to include interactions among the input variables, along with modeling and optimization of pharmaceutical formulations. The objective of this study was to develop an integrated multivariate approach to obtain a quality product based on an understanding of the cause-effect relationships between formulation ingredients and product properties with ANNs and genetic programming on the ramipril tablets prepared by the direct compression method. In this study, the data are generated through the systematic application of the design of experiments (DoE) principles and optimization studies using artificial neural networks and neurofuzzy logic programs.

Towards Pharma 4.0 in clinical trials: A future-orientated perspective.

Pharma 4.0, a technology ecosystem in drug development analogous to Industry 4.0 in healthcare, is transforming the traditional approach to drug discovery and development, aligning product quality with less time to market, and creating intelligent stakeholder networks through effective collaborations. The wide range of potential Pharma 4.0 networks have produced several conceptualizations, which have led to a lack of clarity and definition. The main emphasis of this paper is on the clinical trial stage of drug development in the Pharma 4.0 era. It highlights the merged computerized technologies that are currently used in clinical research, and proposes a framework for integrating Pharma 4.0 technologies. The impact of and barriers to employing the proposed framework are discussed, highlighting its potential and some future research applications.

The Suitability of Propolis as a Bioactive Component of Biomaterials.

Propolis is a resinous product collected by bees from plant exudates to protect and maintain hive homeostasis. Propolis has been used therapeutically for centuries as folk medicine. Modern research investigating the diversity of the chemical composition and plant sources, biological activity, extraction processes, analytical methods, and therapeutic properties in clinical settings have been carried out extensively since the 1980s. Due to its antimicrobial, anti-inflammatory, and immuno-modulator properties, propolis appears to be a suitable bioactive component to be incorporated into biomaterials. This review article attempts to analyze the potential application of propolis as a biomaterial component from the available experimental evidence. The efficacy and compabitility of propolis depend upon factors, such as types of extracts and types of biomaterials. Generally, propolis appears to be compatible with hydroxyapatite/calcium phosphate-based biomaterials. Propolis enhances the antimicrobial properties of the resulting composite materials while improving the physicochemical properties. Furthermore, propolis is also compatible with wound/skin dressing biomaterials. Propolis improves the wound healing properties of the biomaterials with no negative effects on the physicochemical properties of the composite biomaterials. However, the effect of propolis on the glass-based biomaterials cannot be generalized. Depending on the concentration, types of extract, and geographical sources of the propolis, the effect on the glass biomaterials can either be an improvement or detrimental in terms of mechanical properties such as compressive strength and shear bond strength. In conclusion, two of the more consistent impacts of propolis across these different types of biomaterials are the enhancement of the antimicrobial and the immune-modulator/anti-inflammatory properties resulting from the combination of propolis and the biomaterials.

Rectal gel application of Withania somnifera root extract expounds anti-inflammatory and muco-restorative activity in TNBS-induced inflammatory bowel disease.

BACKGROUND: Inflammatory Bowel Disease (IBD) is marked with chronic inflammation of intestinal epithelium driven by oxidative stress. Traditional treatments with plant extracts gained renewed interest due to their ability to ameliorate the multi factorial conditions like inflammation. We investigated the beneficial effects of Withania somnifera in Trinitro Benzyl Sulfonic Acid (TNBS) induced experimental IBD through a rectally applicable formulation. METHODS: The study included (i) preparation of gel formulation from aqueous Withania somnifera root extract (WSRE), (ii) biochemical assays to determine its performance potential, (iii) testing of formulation efficacy in TNBS-induced IBD rat model, and (iv) histo-patholgical studies to assess its healing and muco-regenerative effect in IBD-induced rats. For this purpose, concentration dependant antioxidant activity of the extracts were evaluated using biochemical assays like (a) inhibition of lipid peroxidation, (b) NO scavenging, (c) H2O2 scavenging, and (d) ferric reducing power assay. RESULTS: The extract, at 500 µg/ml, the highest concentration tested, showed 95.6% inhibition of lipid peroxidation, 14.8% NO scavenging, 81.79% H2O2 scavenging and a reducing capacity of 0.80. The results were comparable with standard antioxidants, ascorbic acid and curcumin. WSRE treatment positively scored on histopathological parameters like necrosis, edema, neutrophil infiltration. The post treatment intestinal features showed restoration at par with the healthy intestine. In view of these results, gel formulation containing an aqueous extract of W. somnifera, prepared for rectal application was tested for its anti-inflammatory activity in TNBS-induced rat models for IBD. Commercially available anti-inflammatory drug Mesalamine was used as the standard in this assay. CONCLUSIONS: Dose of the rectal gel applied at 1000 mg of WSRE per kg rat weight showed significant muco-restorative efficacy in the IBD-induced rats, validated by histo-pathological studies.

Preparation and evaluation of talc agglomerates obtained by wet spherical agglomeration as a substrate for coating.

The present research was aimed at the preparation of spherical agglomerates of talc (SAT) by wet spherical agglomeration (WSA) and evaluation as inert core/substrate for coating. Talc being an inert and inexpensive excipient was used in the design of spherical agglomerates. To evaluate agglomerate performance, comparison was made with sugar spheres (SS), having a size 1200 µm, for surface morphology, micromeritics, mechanical, compressional and drug release properties. Surface morphology studied by scanning electron microscopy (SEM) and optical profilometry have shown smooth surface of SAT compared to SS. Shape and sphericity analysis of both showed aspect ratio close to 1. Flowability of SAT was similar to SS. Although, crushing force of SAT was significantly less than SS (p = 0.05), friability studies revealed that it was satisfactory. Compressibility studies showed plastic deformation of SAT unlike SS. Both SAT and SS had comparable drug and polymer layering efficiency, with better surface smoothness in SAT than SS, as confirmed from optical profilometry. Thus, SAT, similar to SS, can be used as a substrate for coating due to its comparable surface topography, micromeritics, adequate crushing resistance and satisfactory drug and polymer layering efficiency.