Synthesis of 1-(4-(dimethylamino)phenyl)-3,4-diphenyl-1H-pyrrole-2,5-dione analogues and their anti-inflammatory activities in lipopolysaccharide-induced BV2 cells.

A series of thalidomide analogues, where the fused benzene ring in the phthalimide moiety was converted into two separated diphenyl rings in maleimide moiety and N-aminoglutarimide moiety was replaced by substituted phenyl moiety, were synthesized and evaluated for their NO inhibitory activities on BV2 cells stimulated with lipopolysaccharide (LPS). Among the synthesized compounds, the dimethylaminophenyl analogue 1s (IC50 = 7.1 µM) showed significantly higher inhibitory activity than the glutarimide analogue 1a (IC50 > 50 µM) and suppressed NO production dose-dependently without cytotoxicity. In addition, 1s inhibited the production of pro-inflammatory cytokines and the expression of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) by blocking nuclear factor-kappa B (NF-κB) and p38 MAPK pathways. These results demonstrated that 1s showed good anti-inflammatory activity and could become a leading compound for the treatment of neuroinflammatory diseases.

In situ graphene oxide-gelatin hydrogels with enhanced mechanical property for tissue adhesive and regeneration.

Extracellular matrix (ECM) is playing a critical role which is component of mammalian tissue that provide structural support to cells. In addition, ECM act as a local depot for growth factors that control cell phenotype and differentiation. In this regard, scaffold that mimicking the ECM structure is important to growth or wound healing process. Gelatin is natural polymer and derived from collagen which is a major component of ECM. Using gelatin as an ECM mimicking structure has advantage of providing three-dimensional growth or supporting to regulate the cell behavior, proliferation, migration, cell survival, and differentiation. In this study, we developed enzyme-mediated crosslinking gelatin-based hydrogels with robust mechanical property to mimicking ECM and effectively attach to the surrounding tissue with high adhesive property. The effect of different concentration of graphene oxide (GO) on the physico-chemical properties of gelatin hydrogels were investigated, particularly tissue adhesion strength. In vitro proteolytic degradation behavior and human dermal fibroblast proliferation study confirmed the hydrogels were biodegradable and promote cell proliferation. Overall, we suggest that GO incorporated gelatin hydrogels with additional interfacial interactions, showing a promising potential as an injectable tissue adhesive.

Supramolecular Gels Incorporating Cordyline terminalis Leaf Extract as a Polyphenol Release Scaffold for Biomedical Applications.

Cordyline terminalis leaf extract (aqCT) possesses abundant polyphenols and other bioactive compounds, which are encapsulated in gelatin-polyethylene glycol-tyramine (GPT)/alpha-cyclodextrin (α-CD) gels to form the additional functional materials for biomedical applications. In this study, the gel compositions are optimized, and the GPT/α-CD ratios equal to or less than one half for solidification are found. The gelation time varies from 40.7 min to 5.0 h depending on the increase in GPT/α-CD ratios and aqCT amount. The aqCT extract disturbs the hydrogen bonding and host-guest inclusion of GPT/α-CD gel networks, postponing the gelation. Scanning electron microscope observation shows that all gels with or without aqCT possess a microarchitecture and porosity. GPT/α-CD/aqCT gels could release polyphenols from 110 to 350 nmol/mL at the first hour and sustainably from 5.5 to 20.2 nmol/mL for the following hours, which is controlled by feeding the aqCT amount and gel properties. GPT/α-CD/aqCT gels achieved significant antioxidant activity through a 100% scavenging DPPH radical. In addition, all gels are non-cytotoxic with a cell viability more than 85%. Especially, the GPT3.75α-CD10.5aqCT gels with aqCT amount of 3.1-12.5 mg/mL immensely enhanced the cell proliferation of GPT3.75α-CD10.5 gel without extract. These results suggest that the inherent bioactivities of aqCT endowed the resulting GPT/α-CD/aqCT gels with effective antioxidant and high biocompatibility, and natural polyphenols sustainably release a unique platform for a drug delivery system or other biomedical applications.

Engineered Heterochronic Parabiosis in 3D Microphysiological System for Identification of Muscle Rejuvenating Factors.

Exposure of aged mice to a young systemic milieu revealed remarkable rejuvenation effects on aged tissues, including skeletal muscle. Although some candidate factors have been identified, the exact identity and the underlying mechanisms of putative rejuvenating factors remain elusive, mainly due to the complexity of in vivo parabiosis. Here, we present an in vitro muscle parabiosis system that integrates young- and old-muscle stem cell vascular niche on a three-dimensional microfluidic platform designed to recapitulate key features of native muscle stem cell microenvironment. This innovative system enables mechanistic studies of cellular dynamics and molecular interactions within the muscle stem cell niche, especially in response to conditional extrinsic stimuli of local and systemic factors. We demonstrate that vascular endothelial growth factor (VEGF) signaling from endothelial cells and myotubes synergistically contribute to the rejuvenation of the aged muscle stem cell function. Moreover, with the adjustable on-chip system, we can mimic both blood transfusion and parabiosis and detect the time-varying effects of anti-geronic and pro-geronic factors in a single organ or multi-organ systems. Our unique approach presents a complementary in vitro model to supplement in vivo parabiosis for identifying potential anti-geronic factors responsible for revitalizing aging organs.

Enhanced tissue adhesiveness of injectable gelatin hydrogels through dual catalytic activity of horseradish peroxidase.

Development of bioadhesives with tunable mechanical strength, high adhesiveness, biocompatibility, and injectability is greatly desirable in all surgeries to replace or complement the sutures and staples. Herein, the dual catalytic activity of horseradish peroxidase is exploited to in situ form the hydroxyphenyl propionic acid-gelatin/thiolated gelatin (GH/GS) adhesive hydrogels including two alternative crosslinks (phenol-phenol and disulfide bonds) with fast gelation (few seconds - several minutes) and improved physicochemical properties. Their elastic moduli increase from 6.7 to 10.3 kPa by adding GS polymer that leads to the better stability of GH/GS hydrogels than GH ones. GH/GS adhesive strength is respectively 6.5-fold and 15.8-fold higher than GH-only and fibrin glue that is due to additional disulfide linkages between hydrogels and tissues. Moreover, in vitro cell study with human dermal fibroblast showed the cell-compatibility of GH/GS hydrogels. Taken together, GH/GS hydrogels can be considered as promising potential adhesive materials for various biomedical applications.

In Situ Forming Gelatin Hydrogels-Directed Angiogenic Differentiation and Activity of Patient-Derived Human Mesenchymal Stem Cells.

Directing angiogenic differentiation of mesenchymal stem cells (MSCs) still remains challenging for successful tissue engineering. Without blood vessel formation, stem cell-based approaches are unable to fully regenerate damaged tissues due to limited support for cell viability and desired tissue/organ functionality. Herein, we report in situ cross-linkable gelatin-hydroxyphenyl propionic acid (GH) hydrogels that can induce pro-angiogenic profiles of MSCs via purely material-driven effects. This hydrogel directed endothelial differentiation of mouse and human patient-derived MSCs through integrin-mediated interactions at the cell-material interface, thereby promoting perfusable blood vessel formation in vitro and in vivo. The causative roles of specific integrin types (α1 and αvß3) in directing endothelial differentiation were verified by blocking the integrin functions with chemical inhibitors. In addition, to verify the material-driven effect is not species-specific, we confirmed in vitro endothelial differentiation and in vivo blood vessel formation of patient-derived human MSCs by this hydrogel. These findings provide new insight into how purely material-driven effects can direct endothelial differentiation of MSCs, thereby promoting vascularization of scaffolds towards tissue engineering and regenerative medicine applications in humans.

Dual growth factor-loaded in situ gel-forming bulking agent: passive and bioactive effects for the treatment of urinary incontinence.

Stress urinary incontinence (SUI) is one of the major medical problems for adult females and has a devastating effect on their quality of life. The major cause of the development of the SUI is dysfunction of the urethral supporting tissues as a result of aging and childbirth. In this study, in situ gel-forming bulking agent loaded with dual growth factors, nerve growth factor (NGF) and basic fibroblast growth factor (bFGF), was fabricated. The bulking agent consisted of three components; (i) polycaprolactone (PCL) beads, (ii) bFGF-loaded nanogels, and (iii) NGF-loaded in situ gel forming solution. The bulking agent can provide an initial passive bulking effect (from the PCL beads) and regenerate malfunctioning tissues around the urethra (from the sequential and continuous release of growth factors from the hydrogel) for the effective treatment of SUI. The PCL beads were located stably at the applied urethra site (urinary incontinent SD rat) without migration to provide a passive bulking effect. The sequential release of the growth factors (NGF within a week and bFGF for more than 4 weeks) from the bulking agent provided regeneration of damaged nerve and smooth muscle, and thus enhanced biological function around the urethra. From the findings, we suggest that dual growth factor (NGF and bFGF)-loaded in situ gel-forming bulking agent may be a promising injectable bioactive system for the treatment for SUI.

In Situ Crosslinkable Gelatin Hydrogels for Vasculogenic Induction and Delivery of Mesenchymal Stem Cells.

Clinical trials utilizing mesenchymal stem cells (MSCs) for severe vascular diseases have highlighted the need to effectively engraft cells and promote pro-angiogenic activity. A functional material accomplishing these two goals is an ideal solution as spatiotemporal and batch-to-batch variability in classical therapeutic delivery can be minimized, and tissue regeneration would begin rapidly at the implantation site. Gelatin may serve as a promising biomaterial due to its excellent biocompatibility, biodegradability, and non-immuno/antigenicity. However, the dissolution of gelatin at body temperature and quick enzymatic degradation in vivo have limited its use thus far. To overcome these challenges, an injectable, in situ crosslinkable gelatin was developed by conjugating enzymatically-crosslinkable hydroxyphenyl propionic acid (GHPA). When MSCs are cultured in 3D in vitro or injected in vivo in GHPA, spontaneous endothelial differentiation occurs, as evidenced by marked increases in endothlelial cell marker expressions (Flk1, Tie2, ANGPT1, vWF) in addition to forming an extensive perfusable vascular network after 2-week subcutaneous implantation. Additionally, favorable host macrophage response is achieved with GHPA as shown by decreased iNOS and increased MRC1 expression. These results indicate GHPA as a promising soluble factor-free cell delivery template which induces endothelial differentiation of MSCs with robust neovasculature formation and favorable host response.

Macro/Nano-gel composite as an injectable and bioactive bulking material for the treatment of urinary incontinence.

Many women around the world are suffering from urinary incontinence, defined as the unintentional leakage of urine by external abnormal pressure. Although various kinds of materials have been utilized to treat this disease, therapies that are more effective are still needed for the treatment of urinary incontinence. Here, we present a macro/nanogel composed of in situ forming gelatin-based macrogels and self-assembled heparin-based nanogels, which can serve as an injectable and bioactive bulking material for the treatment of urinary incontinence. The hybrid hydrogels were prepared via enzymatic reaction in the presence of horseradish peroxidase and hydrogen peroxide. Incorporating a growth factor (GF)-loaded heparin nanogel into a gelatin gel matrix enabled the hybrid gel matrix to release GF continuously up to 28 days. Moreover, we demonstrated that the hydrogel composites stimulated the regeneration of the urethral muscle tissue surrounding the urethral wall and promoted the recovery of their biological function when injected in vivo. Thus, the macro/nanohydrogels may provide an advanced therapeutic technique for the treatment of urinary incontinence as well as an application for regenerative medicine.

Flow Diverter Performance Comparison of Different Wire Materials for Effective Intracranial Aneurysm Treatment.

A flow diverter (FD) is an effective method for treating wide-necked intracranial aneurysms by inducing hemodynamic changes in aneurysms. However, the procedural technique remains challenging, and it is often not performed properly in many cases of deployment or placements. In this study, three types of FDs that changed the material of the wire were prepared within the same structure. Differences in physical properties, such as before and after delivery loading stent size, radial force, and radiopacity, were evaluated. The performances in terms of deployment and trackability force were also evaluated in a simulated model using these FDs. Furthermore, changes of deployment patterns when these FDs were applied to a 3D-printed aneurysm model were determined. The NiTi FD using only nitinol (NiTi) wire showed 100% size recovery and 42% to 45% metal coverage after loading. The low trackability force (10.9 to 22.9 gf) allows smooth movement within the delivery system. However, NiTi FD cannot be used in actual surgeries due to difficulties in X-ray identification. NiTi-Pt/W FD, a combination of NiTi wire and platinum/tungsten (Pt/W) wire, had the highest radiopacity and compression force (6.03 ± 0.29 gf) among the three FDs. However, it suffered from high trackability force (22.4 to 39.9 gf) and the end part braiding mesh tended to loosen easily, so the procedure became more challenging. The NiTi(Pt) FD using a platinum core nitinol (NiTi(Pt)) wire had similar trackability force (11.3 to 22.1 gf) to NiTi FD and uniform deployment, enhancing procedural convenience. However, concerns about low expansion force (1.79 ± 0.30 gf) and the potential for migration remained. This comparative analysis contributes to a comprehensive understanding of how different wire materials influence the performance of FDs. While this study is still in its early stages and requires further research, its development has the potential to guide clinicians and researchers in optimizing the selection and development of FDs for the effective treatment of intracranial aneurysms.

Biocatalytic nitric oxide generating hydrogels with enhanced anti-inflammatory, cell migration, and angiogenic capabilities for wound healing applications.

Although wound healing is a normal physiological process in the human body, it is often impaired by bacterial infections, ischemia, hypoxia, and excess inflammation, which can lead to chronic and non-healing wounds. Recently, injectable hydrogels with controlled nitric oxide (NO) release behaviour have become potential wound healing therapeutic agents due to their excellent biochemical, mechanical, and biological properties. Here, we proposed novel multifunctional NO-releasing hydrogels that could regulate various wound healing processes, including hemostasis, inflammation, cell proliferation and angiogenesis. By incorporating the copper nanoparticles (NPs) in the network of dual enzymatically crosslinked gelatin hydrogels (GH/Cu), NO was in situ produced via the Cu-catalyzed decomposition of endogenous RSNOs available in the blood, thus resolving the intrinsic shortcomings of NO therapies, such as the short storage and release time, as well as the burst and uncontrollable release modes. We demonstrated that the NO-releasing gelatin hydrogels enhanced the proliferation and migration of endothelial cells, while promoting the M2 (anti-inflammatory) polarization of the macrophage. Furthermore, the effects of NO release on angiogenesis were evaluated using an in vitro tube formation assay and in ovo chicken chorioallantoic membrane (CAM) assay, which revealed that GH/Cu hydrogels could significantly facilitate neovascularization, consistent with the in vivo results. Therefore, we suggested that these hydrogel systems would significantly enhance the wound healing process through the synergistic effects of the hydrogels and NO, and hence could be used as advanced wound dressing materials.

Gelatin microgel-coated balloon catheter with enhanced delivery of everolimus for long-term vascular patency.

In-stent restenosis (ISR) after percutaneous coronary intervention is a major reason for limited long-term patency due to complex neointimal proliferation caused by vascular injury. Drug-coated balloon (DCB) has been developed to treat various cardiovascular diseases including ISR by providing anti-proliferative drugs into blood vessel tissues. However, a significant proportion of the drug is lost during balloon tracking, resulting in ineffective drug delivery to the target region. In this study, we report an everolimus-coated balloon (ECB) using everolimus-loaded gelatin-hydroxyphenyl propionic acid microgel (GM) with enhanced everolimus delivery to vascular walls for long-term patency. GM with high drug loading (> 97%) was simply prepared by homogenizing enzyme-mediated crosslinked hydrogels. The optimal condition to prepare GM-coated ECB (GM-ECB) was established by changing homogenization time and ethanol solvent concentration (30 ∼ 80%). In vitro sustained everolimus release for 30 d, and cellular efficacy using smooth muscle cells and vascular endothelial cells were evaluated. Additionally, an in vivo drug transfer levels of GM-ECB using rabbit femoral arteries were assessed with reduced drug loss and efficient drug delivery capability. Finally, using ISR-induced porcine models, effective in vivo vascular patency 4 weeks after treatment of ECBs was also confirmed. Thus, this study strongly demonstrates that GM can be used as a potential drug delivery platform for DCB application. STATEMENT OF SIGNIFICANCE: We report an ECB using everolimus-loaded GM prepared by homogenization of enzymatic cross-linked hydrogel. GM showed efficient drug loading (> 97 %) and controllable size. GM-ECB exhibited potential to deliver everolimus in a sustained manner to target area with drug efficacy and viability against SMC and EC. Although GM-ECB had much lower drug content compared to controls, animal study demonstrated enhanced drug transfer and reduced drug loss of GM-ECB due to the protection of encapsulated drugs by GM, and the possible interaction between GM and endothelium. Finally, vascular patency and safety were assessed using ISR-induced porcine models. We suggest an advanced DCB strategy to alleviate rapid drug clearance by bloodstream while improving drug delivery for a long-term vascular patency.

Correction: Nguyen et al. Green Silver Nanoparticles Formed by Phyllanthus urinaria, Pouzolzia zeylanica, and Scoparia dulcis Leaf Extracts and the Antifungal Activity. Nanomaterials 2020, 10, 542.

In the original publication [...].

Heparin-conjugated pluronic nanogels as multi-drug nanocarriers for combination chemotherapy.

Combination chemotherapy using more than two therapeutic agents with different modes of action is a promising strategy that can be used to enhance the therapeutic efficacy of cancer treatment, even though it is a complicated treatment modality. The aim of this study was to investigate how a novel multidrug nanocarrier is effective for combination chemotherapy in vitro and, more specifically, whether combined agents with different modes of action and physicochemical properties show synergistic cytotoxicity with the use of this nanocarrier. A heparin-Pluronic (Hep-Pr) nanogel encapsulating both paclitaxel and DNase was shown to be efficient for intracellular delivery with respect to size, encapsulation efficiency, and intracellular uptake/fates. As a result of these properties, a Hep-Pr nanogel combined with paclitaxel and DNase exhibited a dose-dependent synergistic cytotoxicity compared to single drug and free-drug treatments, whose combination indices were 0.93 and 0.45 at higher concentrations (250 and 500 µg/mL). Therefore, Hep-Pr nanogels have the potential to deliver multitherapeutic agents with different characteristics and thereby enhance the therapeutic efficacy of combination cancer chemotherapy.

Rapid transfer of endothelial cell sheet using a thermosensitive hydrogel and its effect on therapeutic angiogenesis.

In this study, thermosensitive hydrogels incorporated with multiple cell-interactive factors were developed as a substrate to form monolayer of human umbilical vein endothelial cells (HUVECs) that can be detached and transferrable to target sites as a cell-sheet in response to temperature change. The cell adhesive peptide (RGD) and growth factor (bFGF) covalently incorporated within the hydrogel significantly enhanced adhesion and proliferation of HUVECs, allowing for the formation of their confluent monolayer. Meanwhile, the precisely controllable change in the size of the hydrogels was observed by a repeated increase and decrease in temperature from 37 to 4 °C. By exploiting this unique behavior, the detachment and transfer of HUVEC sheet confluently cultured at 37 °C was rapidly induced within 10 min by expansion of the hydrogels when the temperature was decreased to 4 °C. The transferred cell sheet was highly viable and maintained robust cell-cell junction. Finally, the process of cell sheet transfer was directly applied onto an ischemic injury in the hind limb of mice. The transplanted HUVECs as a sheet retarded tissue necrosis over 14 days in comparison with that of direct injection of the same number of cells. Our results suggest that the developed multifunctional Tetronic-tyramine hydrogels could serve as an ideal substrate to modulate the formation of an endothelial cell layer that could potentially be utilized to treat peripheral arterial disease.

Intravitreal injectable hydrogel rods with long-acting bevacizumab delivery to the retina.

Retinal vascular diseases such as neovascular age-related macular degeneration (nAMD) are the leading cause of blindness worldwide. They can be treated with intravitreal injections of anti-vascular endothelial growth factor (anti-VEGF) agents by inhibiting VEGF which is a major agent of abnormal blood vessel growth. However, because of drug's short half-life, clinical treatment often requires monthly repeated intravitreal injections, causing treatment burden and undertreatment. Among various kinds of drug carriers, in situ forming hydrogels have been studied as potential intravitreal drug carriers for the high drug loading, easy injection, controlled drug release, and protection of encapsulated drugs from the environment. However, gelation time, crosslinking degree, and drug release patterns following injection of a liquid that will be subsequently gelled in situ are susceptible to be hindered by dilution of the hydrogel precursor solution with body fluids (e.g., blood or vitreous). Here, we report an injectable pre-crosslinked hydrogel rod to overcome the limitations of in situ forming hydrogels and to extend intravitreal half-life of anti-VEGF for reducing intraocular injection frequency. Hydrogel rods can be simply prepared using in situ forming hydrogels, and injectable using a designed rod injector. The adjustable crosslinking degree of hydrogel rods easily controlled bevacizumab release profiles in a sustained manner. Compared with in situ forming hydrogels, hydrogel rods effectively reduced initial burst release, and showed sustained release with long-term drug efficacy in vitro. From the 4-month in vivo pharmacokinetic analysis, following the intravitreal injection of hydrogel rods, the half-life of bevacizumab in the vitreous and retina was significantly extended, and drug elimination to aqueous humor was effectively reduced. Finally, intraocular stability, degradation, and inflammatory response of hydrogel rods were evaluated. We expect that the hydrogel rod can be a potential drug delivery system for the treatment of nAMD and other conditions that need long-term and local sustained drug administration. STATEMENT OF SIGNIFICANCE: Herein, we report an injectable pre-crosslinked hydrogel rod based on an in situ forming hydrogel to achieve intravitreal long-acting anti-VEGF delivery to reduce injection frequency and improve the long-term visual outcomes of patients with retinal vascular diseases. Hydrogel rods were readily prepared using removable molds and injected using customized injectors. Compared to the in situ forming hydrogel, hydrogel rods showed significantly reduced initial burst release, controllable release profiles for several months, physical stability, and a long-acting anti-angiogenic effect. Animal studies demonstrated that the hydrogel rods dramatically prolonged the intraocular drug half-life while significantly reducing drug elimination for up to four months. Moreover, the biodegradability and safety of the hydrogel rods suggest their suitability as an advanced intravitreal DDS for treating retinal vascular diseases.

In situ SVVYGLR peptide conjugation into injectable gelatin-poly(ethylene glycol)-tyramine hydrogel via enzyme-mediated reaction for enhancement of endothelial cell activity and neo-vascularization.

Tissue engineering therapies require biocompatible and bioactive biomaterials that are capable of encouraging an angiogenic response for effective tissue regeneration. In this study, a SVVYGLR peptide, which functions as a potent angiogenic factor, was conjugated into injectable gelatin-poly(ethylene glycol)-tyramine (GPT) hydrogels in situ to enhance endothelial cell activities and neo-vascularization. SVVYGLRGGY (SV-Y) conjugated GPT (SV-GPT) hydrogels were formed in situ via enzyme-mediated reaction using horseradish peroxidase (HRP) and hydrogen peroxide (H(2)O(2)). The physico-chemical properties were characterized and could be controlled depending on the feed peptide and H(2)O(2) concentration. The concentration of conjugated peptide ranged from 0.37 to 0.81 µmol/mL, and the elastic moduli (G') of the hydrogels were 600-4900 Pa. In vitro cell studies using human umbilical vein endothelial cells (HUVECs) and in vivo subcutaneous injection studies were performed to confirm the effect of the SVVYGLR peptide on HUVEC activity and neo-vascularization. Obtained results demonstrated that the in situ conjugation of SVVYGLR sequences into phenol residues of GPT hydrogels enhanced the activity of HUVECs in vitro and stimulated the formation of new blood vessels in the hydrogel matrices in vivo. From the results, we suggest that in situ conjugation of SV-Y to GPT hydrogels via the enzymatic reaction may be an efficient tool to prepare injectable bioactive hydrogels that can enhance endothelial cell activities and promoting angiogenesis for tissue regeneration.

Synthesis and characterizations of in situ cross-linkable gelatin and 4-arm-PPO-PEO hybrid hydrogels via enzymatic reaction for tissue regenerative medicine.

In situ cross-linkable hybrid hydrogels composed of gelatin and 4-arm-polypropylene oxide-polyethylene oxide (Tetronic) was developed as an injectable scaffold for tissue regeneration. The gelatin was modified by hydroxyphenyl propionic acid (HPA) and the Tetronic was conjugated with tyramines (Tet-TA). The hydrogels were rapidly formed by mixing the polymer solutions containing horseradish peroxidase (HRP) and hydrogen peroxide (H(2)O(2)). The gelation time and mechanical properties of the hydrogels could be controlled by varying the HRP and H(2)O(2) concentrations. In vitro degradation study of the hybrid hydrogels was carried out using collagenase and the prolonged proteolytic degradation was obtained due to the presence of the Tetronic. Human dermal fibroblast (hDFB) was cultured in the hydrogel matrices to evaluate the cyto-compatibility. The encapsulated cells were shown to be highly viable and spread over the gel matrices, suggesting that the hybrid hydrogels have an excellent cyto-compatibility. The hydrogels were also subcutaneously injected in the back of mice and the results demonstrated that the hydrogels were rapidly formed at the injected site. From these results, we demonstrate that the in situ cross-linkable hydrogels formed by hybridization of gelatin and Tetronic via enzyme-mediated reactions hold great promise for use as injectable matrices for tissue regenerative medicine due to their tunable physico-chemical properties and excellent bioactivity.

Sustained cytoplasmic delivery and anti-viral effect of PLGA nanoparticles carrying a nucleic acid-hydrolyzing monoclonal antibody.

PURPOSE: Cytoplasmic delivery of a monoclonal antibody (mAb) with nucleic acid-hydrolyzing activity (3D8 scFv) using poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs) was investigated for persistent anti-viral effect. METHODS: 3D8 scFv-loaded PLGA (3D8-PLGA) NPs were prepared via a double emulsion method that was previously optimized. Flow cytometry and confocal microscopy was carried out to confirm the cellular uptake and cytoplasmic localization. immunochemical and fluorescence resonance energy transfer (FRET) assays tested the cytoplasmic release and hydrolyzing effect of 3D8 scFv, respectively. Anti-viral activity test was performed using MTT assay with vesicular stomatitis virus (VSV)-infected HeLa cells. RESULTS: 3D8-PLGA NPs were much more effectively taken into cells in dose- and time-dependent manner and localized in the cytosolic region, compared to free 3D8 scFv. 3D8 scFv was released and hydrolyzed RNAs in the cytoplasm, exhibiting the maxima at a period of time (12-24 h). Anti-viral activity test revealed that 3D8-PLGA NP has dose- and time-dependent anti-viral effect and the maximum effect at the dose of 2 mg/ml and the incubation of 3 days. CONCLUSIONS: Cytoplasmic delivery of 3D8 scFv via PLGA NPs could enhance the viability of infected cells in sustained manner due to preserved activity, much improved cellular uptake and sustained release.

Injectable reactive oxygen and nitrogen species-controlling hydrogels for tissue regeneration: current status and future perspectives.

The dual role of reactive oxygen and nitrogen species (RONS) in physiological and pathological processes in biological systems has been widely reported. It has been recently suggested that the regulation of RONS levels under physiological and pathological conditions is a potential therapy to promote health and treat diseases, respectively. Injectable hydrogels have been emerging as promising biomaterials for RONS-related biomedical applications owing to their excellent biocompatibility, three-dimensional and extracellular matrix-mimicking structures, tunable properties and easy functionalization. These hydrogels have been developed as advanced injectable platforms for locally generating or scavenging RONS, depending on the specific conditions of the target disease. In this review article, the design principles and mechanism by which RONS are generated/scavenged from hydrogels are outlined alongside a discussion of their in vitro and in vivo evaluations. Additionally, we highlight the advantages and recent developments of these injectable RONS-controlling hydrogels for regenerative medicines and tissue engineering applications.