Synthetic rescue couples NADPH generation to metabolite overproduction in Saccharomyces cerevisiae.

Engineering the redox cofactor metabolism is known to be a key challenge in developing a platform strain for biosynthesis of valuable products. Hence, general strategies for manipulation of co-factor metabolism in industrially relevant hosts are of significance. Here, we demonstrate an improvement in α-ketoglutarate (AKG) production in S. cerevisiae using a novel approach based on synthetic rescue. Here, we first perturb the cytosolic NADPH metabolism via deletion of glucose-6-phosphate dehydrogenase (ZWF1). In parallel, we used a strain design algorithm to identify strategies for further improvement in AKG production. Implementation of the identified genetic targets, including disruption of succinyl-CoA Ligase (LSC2) and constitutive expression of NADP+-specific isocitrate dehydrogenases (IDP1 and IDP2) resulted in more than 3 fold improvement in AKG production as compared to the wild type. Our results demonstrate this improvement is due to a synthetic rescue mechanism in which the metabolic flux was redirected towards AKG production through the manipulation of redox cofactors. Disrupting lsc2 in zwf1 mutant improved specific growth rate more than 15% as compared to the zwf1 mutant. In addition, our result suggests that cytosolic isocitrate dehydrogenase (IDP2) may be regulated by isocitrate pools. Together, these results suggest the ability to improve metabolite production via a model guided synthetic rescue mechanism in S. cerevisiae and the potential for using IDP2 expression as a generalized strategy to effectively meet NADPH requirements in engineered strains.

Metabolic engineering of Saccharomyces cerevisiae for linalool production.

OBJECTIVES: To engineer the yeast Saccharomyces cerevisiae for the heterologous production of linalool. RESULTS: Expression of linalool synthase gene from Lavandula angustifolia enabled heterologous production of linalool in S. cerevisiae. Downregulation of ERG9 gene, that encodes squalene synthase, by replacing its native promoter with the repressible MET3 promoter in the presence of methionine resulted in accumulation of 78 µg linalool l(-1) in the culture medium. This was more than twice that produced by the control strain. The highest linalool titer was obtained by combined repression of ERG9 and overexpression of tHMG1. The yeast strain harboring both modifications produced 95 µg linalool l(-1). CONCLUSIONS: Although overexpression of tHMG1 and downregulation of ERG9 enhanced linalool titers threefold in the engineered yeast strain, alleviating linalool toxicity is necessary for further improvement of linalool biosynthesis in yeast.

Dynamic control of gene expression in Saccharomyces cerevisiae engineered for the production of plant sesquitepene α-santalene in a fed-batch mode.

Microbial cells engineered for efficient production of plant sesquiterpenes may allow for sustainable and scalable production of these compounds that can be used as e.g. perfumes and pharmaceuticals. Here, for the first time a Saccharomyces cerevisiae strain capable of producing high levels of α-santalene, the precursor of a commercially interesting compound, was constructed through a rationally designed metabolic engineering approach. Optimal sesquiterpene production was obtained by modulating the expression of one of the key metabolic steps of the mevalonate (MVA) pathway, squalene synthase (Erg9). To couple ERG9 expression to glucose concentration its promoter was replaced by the HXT1 promoter. In a second approach, the HXT2 promoter was used to express an ERG9 antisense construct. Using the HXT1 promoter to control ERG9 expression, it was possible to divert the carbon flux from sterol synthesis towards α-santalene improving the productivity by 3.4 fold. Combining this approach together with the overexpression of a truncated form of 3-hydroxyl-3-methyl-glutaryl-CoA reductase (HMGR) and deletion of lipid phosphate phosphatase encoded by LPP1 led to a strain with a productivity of 0.18mg/gDCWh. The titer was further increased by deleting DPP1 encoding a second FPP consuming pyrophosphate phosphatase yielding a final productivity and titer, respectively, of 0.21mg/gDCWh and 92mg/l of α-santalene.

Enhancing the copy number of episomal plasmids in Saccharomyces cerevisiae for improved protein production.

2 µm-based episomal expression vectors are widely used in Saccharomyces cerevisiae for recombinant protein production and synthetic pathway optimization. In this study, we report a new approach to increase the plasmid copy number (PCN) and thus improve the expression of plasmid-encoded proteins. This was achieved by combining destabilization of the marker protein with decreasing the marker gene transcription level. Destabilization of the marker protein alone by fusing a ubiquitin/N-degron tag (ubi-tag) to the N-terminus of the Ura3 marker protein could increase the PCN and activity of LacZ expressed from the same vector. When arginine was exposed at the N-terminus of the marker protein after cleavage of ubiquitin, the PCN and LacZ activity were increased by 70-80%. Replacement of the native URA3 promoter with the HXT1, KEX2 or URA3-d promoter resulted in an increase in the PCN and LacZ activity by about 30-100%. Combining the ubi-tag and promoter modification of the marker gene, increased the PCN and LacZ activity by threefold. We also demonstrated that this new expression vectors can be used to increase enzyme activity by improving patchoulol production by threefold.

Combined metabolic engineering of precursor and co-factor supply to increase α-santalene production by Saccharomyces cerevisiae.

BACKGROUND: Sesquiterpenes are a class of natural products with a diverse range of attractive industrial proprieties. Due to economic difficulties of sesquiterpene production via extraction from plants or chemical synthesis there is interest in developing alternative and cost efficient bioprocesses. The hydrocarbon α-santalene is a precursor of sesquiterpenes with relevant commercial applications. Here, we construct an efficient Saccharomyces cerevisiae cell factory for α-santalene production. RESULTS: A multistep metabolic engineering strategy targeted to increase precursor and cofactor supply was employed to manipulate the yeast metabolic network in order to redirect carbon toward the desired product. To do so, genetic modifications were introduced acting to optimize the farnesyl diphosphate branch point, modulate the mevalonate pathway, modify the ammonium assimilation pathway and enhance the activity of a transcriptional activator. The approach employed resulted in an overall α-santalene yield of a 0.0052 Cmmol (Cmmol glucose)(-1) corresponding to a 4-fold improvement over the reference strain. This strategy, combined with a specifically developed continuous fermentation process, led to a final α-santalene productivity of 0.036 Cmmol (g biomass)(-1) h(-1). CONCLUSIONS: The results reported in this work illustrate how the combination of a metabolic engineering strategy with fermentation technology optimization can be used to obtain significant amounts of the high-value sesquiterpene α-santalene. This represents a starting point toward the construction of a yeast "sesquiterpene factory" and for the development of an economically viable bio-based process that has the potential to replace the current production methods.

Characterization of different promoters for designing a new expression vector in Saccharomyces cerevisiae.

The widely used pESC vector series (Stratagene, La Jolla, CA, USA) with the bidirectional GAL1/GAL10 promoter provides the possibility of simultaneously expressing two different genes from a single vector in Saccharomyces cerevisiae. This system can be induced by galactose and is repressed by glucose. Since S. cerevisiae prefers glucose as a carbon source, and since its growth rate is higher in glucose than in galactose-containing media, we compared and evaluated seven different promoters expressed during growth on glucose (pTEF1, pADH1, pTPI1, pHXT7, pTDH3, pPGK1 and pPYK1) with two strong galactose-induced promoters (pGAL1 and pGAL10), using lacZ as a reporter gene and measuring LacZ activity in batch and continuous cultivation. TEF1 and PGK1 promoters showed the most constant activity pattern at different glucose concentrations. Based on these results, we designed and constructed two new expression vectors which contain the two constitutive promoters, TEF1 and PGK1, in opposite orientation to each other. These new vectors retain all the features from the pESC-URA plasmid except that gene expression is mediated by constitutive promoters.

Biocatalytic production of adipic acid from glucose using engineered Saccharomyces cerevisiae.

Adipic acid is an important industrial chemical used in the synthesis of nylon-6,6. The commercial synthesis of adipic acid uses petroleum-derived benzene and releases significant quantities of greenhouse gases. Biocatalytic production of adipic acid from renewable feedstocks could potentially reduce the environmental damage and eliminate the need for fossil fuel precursors. Recently, we have demonstrated the first enzymatic hydrogenation of muconic acid to adipic acid using microbial enoate reductases (ERs) - complex iron-sulfur and flavin containing enzymes. In this work, we successfully expressed the Bacillus coagulans ER in a Saccharomyces cerevisiae strain producing muconic acid and developed a three-stage fermentation process enabling the synthesis of adipic acid from glucose. The ability to express active ERs and significant acid tolerance of S. cerevisiae highlight the applicability of the developed yeast strain for the biocatalytic production of adipic acid from renewable feedstocks.

Sub-optimal phenotypes of double-knockout mutants of Escherichia coli depend on the order of gene deletions.

Metabolic networks are characterized by multiple redundant reactions that do not have a clear biological function. The redundancies in the metabolic networks are implicated in adaptation to random mutations and survival under different environmental conditions. Reactions that are not active under wild-type growth conditions, but get transiently activated after a mutation event such as gene deletion are known as latent reactions. Characterization of multiple-gene knockout mutants can identify the physiological roles of latent reactions. In this study, we characterized double-gene deletion mutants of E. coli with the aim of investigating the sub-optimal physiology of the mutants and the possible roles of latent reactions. Specifically, we investigated the effects of the deletion of the glyoxylate-shunt gene aceA (encoding a latent reaction enzyme, isocitrate lyase) on the growth characteristics of the mutant E. coli Δpgi. The deletion of aceA reduced the growth rate of E. coli Δpgi, indicating that the activation of the glyoxylate shunt plays an important role in adaptation of the mutant E. coli Δpgi when no other latent reactions are concurrently inactivated. We also investigated the effect of the order of the gene deletions on the growth rates and substrate uptake rates of the double-gene deletion mutants. The results indicate that the order in which genes are deleted determines the phenotype of the mutants during the sub-optimal growth phase. To elucidate the mechanism behind the difference between the observed phenotypes, we carried out transcriptomic analysis and constraint-based modeling of the mutants. Transcriptomic analysis showed differential expression of the gene aceK (encoding the protein isocitrate dehydrogenase kinase) involved in controlling the isocitrate flux through the TCA cycle and the glyoxylate shunt. Higher acetate production in the E. coli ΔaceA1 Δpgi2 mutant was consistent with the increased aceK expression, which limits the TCA cycle flux and causes acetate production via overflow metabolism.

Reconstruction and evaluation of the synthetic bacterial MEP pathway in Saccharomyces cerevisiae.

Isoprenoids, which are a large group of natural and chemical compounds with a variety of applications as e.g. fragrances, pharmaceuticals and potential biofuels, are produced via two different metabolic pathways, the mevalonate (MVA) pathway and the 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway. Here, we attempted to replace the endogenous MVA pathway in Saccharomyces cerevisiae by a synthetic bacterial MEP pathway integrated into the genome to benefit from its superior properties in terms of energy consumption and productivity at defined growth conditions. It was shown that the growth of a MVA pathway deficient S. cerevisiae strain could not be restored by the heterologous MEP pathway even when accompanied by the co-expression of genes erpA, hISCA1 and CpIscA involved in the Fe-S trafficking routes leading to maturation of IspG and IspH and E. coli genes fldA and fpr encoding flavodoxin and flavodoxin reductase believed to be responsible for electron transfer to IspG and IspH.