The Bio-Restorative Concept for Implant-Supported Restorations.

OBJECTIVE: This study aims to present the bio-restorative approach in implant dentistry, which combines biological and restorative concepts through digital planning. This concept combines periodontal, surgical, and prosthetic variables, aiming to reduce patient morbidity while achieving satisfactory esthetic and functional outcomes in implant-supported restorations in the long term. OVERVIEW: Implant dentistry evolved from a primarily surgical to a recent prosthetically driven approach. This evolution was partly due to advancements in bone reconstructive techniques and an increased demand for esthetic outcomes. Recently, digital planning has introduced a new paradigm that allows for the full integration of both approaches. The bio-restorative concept considers functional, esthetic, and biological variables in a virtual planning environment. This is achieved through the simultaneous digital assessment of (A) anatomical site characteristics and (B) implant restorative variables. These variables include digital tooth arrangement, soft-hard tissue conditions, implant variables, supra-platform components, and a surgical plan that respects or modifies peri-implant phenotype. CONCLUSIONS: The bio-restorative concept is intended to improve contemporary implant dentistry by integrating updated biological and prosthetic notions through digital planning. Adopting this paradigm has the potential to redefine the standards in implant dentistry, fostering a holistic and patient-centered approach. CLINICAL CONSIDERATIONS: It enhances patient and clinician satisfaction through more efficient and less invasive procedures. Significantly, it improves predictability, leading to successful implant-supported restorations in the long term.

Considerations for predictable outcomes in static computer- aided implant surgery in the esthetic zone.

OBJECTIVE: To provide technical and clinical recommendations for implementing a digital workflow in Static Computer-Aided Implant Surgery in the anterior maxilla. CLINICAL CONSIDERATIONS: An optimal 3D implant position is crucial for achieving satisfying results in implant rehabilitation in the esthetic area. Due to its complexity, implant placement in the esthetic zone should be executed with precision and predictability. Static Computer-Aided Implant Surgery requires thorough planning and detailed attention to every step of the digital workflow protocol. CONCLUSIONS: Implant positioning in the esthetic zone using Static Computer-Aided Implant Surgery is a technique-sensitive procedure that requires precise execution of each step. This approach ensures accurate prosthetically driven 3D implant placement and prevents potential errors that could lead to inaccurate positioning. CLINICAL SIGNIFICANCE: The proper implementation of Static Computer-Aided Implant Surgery may increase the level of agreement between the planned and definitive implant 3D positions in the esthetic zone, thus enhancing the esthetic outcomes of implant rehabilitation.

Implant survival in the anterior mandible: A retrospective cohort study.

OBJECTIVE: This study aims to report the implant survival rate of dental implants of partially dentate patients in the anterior mandible and the potential risk indicators for implant failure. MATERIALS AND METHODS: Patients with implant-supported restorations of single or multiple teeth in the anterior mandible restored with fixed partial implant-supported restorations were evaluated. Patient demographic data, implant placement timing, and loading protocol, biological and/or technical complications at the time of the last clinical and radiographic follow-up visit were registered. Survival rate, success rate, and potential risk indicators for implant failure were calculated. RESULTS: A total of 108 patients and 186 implants with a mean follow-up period of 5.48 years (0.1-11.34 years) were included. The 11.3-year cumulative survival rate was 90.9%. Immediate implant placement (OR = 2.75) (p = .08) and immediate implant loading (OR = 8.8) (p = .02*) indicated a higher risk of failure than late implant placement or loading. When combining both categories (type 1A), an OR = 10.59 (p = .04*) for implant failure was found compared to category 4C. Implants placed following static-computer-assisted implant surgery (S-CAIS) showed less risk of failure compared to freehand implant placement (OR = 0.18; 95% CI: 0.02-1.37) (p = .09). CONCLUSIONS: The survival rate of implants placed in the anterior mandible was considerably low (90.9%). S-CAIS, late placement, and conventional loading are protective factor against implant failure in the anterior mandible.

Full mouth oral rehabilitation of a severely worn dentition based on a fully digital workflow.

OBJECTIVE: To demonstrate the use of a complete digital workflow for a full mouth rehabilitation in a severely worn dentition. CLINICAL CONSIDERATIONS: The present case report successfully rehabilitated a full-mouth case of a severely worn dentition based on the use of digital technologies, making the diagnosis and treatment process faster, accurate and less expensive. A long-lasting esthetic and functional result are showed after 30-months follow up. CONCLUSIONS: An appropriate knowledge on dental erosion and oral rehabilitation, combined with a digital dentistry approach could lead the clinician to deliver a fast, accurate and predictable noninvasive restorative treatment in cases like the one described. CLINICAL SIGNIFICANCE: Bruxism-based severely worn dentition is being found more often in population. In this situation, a detailed diagnosis and tailored treatment are mandatory to obtain a predictable treatment outcome. In this sense, the development of adhesive dentistry, new restorative materials and the incorporation of digital technologies can create a predictable synergy to rehabilitate these types of patients with a modern and less invasive approach.

Multifunctional anatomical prototypes (MAPs): Treatment of excessive gingival display due to altered passive eruption.

OBJECTIVE: To describe a strategy using digital technologies for improving the diagnosis, treatment planning, and surgical execution of patients with excessive gingival display (EGD) due to altered passive eruption (APE). CLINICAL CONSIDERATIONS: An important component for successful patient's management is to fulfill their esthetic expectations whilst delivering predictable and long-term therapeutic outcomes. To achieve this goal in patients with excessive gingival display due to altered passive eruption, it is essential to perform an accurate diagnosis and to communicate to the patient the expected customized results using digital technologies. Computer-aided designed and manufactured multifunctional anatomical prototypes (MAPs) may contribute to these purposes. Additionally, they can guide the surgical crown lengthening procedure or serve as a reference during the surgical guide fabrication providing information of the required anatomical landmarks. CONCLUSIONS: This novel strategy protocol for diagnosis, communication, and treatment management of patients with excessive gingival display follows functional and biological principles within the frame of a digital workflow, which improves the diagnostic capabilities, enhances communication, and guides the surgical treatment as shown in the 12 months follow-up of the reported case. CLINICAL SIGNIFICANCE: Developing a virtual patient by combining multiple digital data sets including cone-beam computed tomography (CBCT), intra-oral scans and digital photography, supports the clinician and the patient to achieve a comprehensive diagnosis and to better communicate the expected results to the patient. Furthermore, this digital treatment exercise based on anatomical and biological principles will facilitate the surgical precision and the achievement of successful outcomes, thus fulfilling the patient needs and expectations.

Effect of sub-marginal instrumentation before surgical treatment of peri-implantitis: A multi-centre randomized clinical trial.

AIM: The present multi-centre randomized clinical trial with 12 months of follow-up aimed at studying the added effect of sub-marginal instrumentation before surgical treatment of peri-implantitis. MATERIALS AND METHODS: Forty-two patients diagnosed with peri-implantitis were recruited. After a behavioural intervention phase including oral hygiene instructions, patients were randomized to either receiving supra- and sub-marginal instrumentation on their affected implants (control group: 21 patients and 29 implants) or only supra-marginal instrumentation (test group: 21 patients and 24 implants), before undergoing surgery. Changes in the deepest probing pocket depth (PPD) with respect to baseline and a composite outcome of treatment success (no implant loss, no bone loss > 0.5 mm, no bleeding or suppuration on probing [BoP/SoP], and PPD ≤ 5 mm) at the 12-month examination were regarded as the primary outcomes of the trial. RESULTS: At the 12-month examination, changes in the deepest PPD with respect to baseline amounted to -2.96 mm in the control group and to -3.11 mm in the test one (MD = -0.16; SE = 0.56; p = .769), while 21.4% of the implants in the control group and 33.3% in the test group presented treatment success (OR = 1.83; SE = 1.15; p = .338). With the exception of a longer non-surgical treatment duration in the control group (differences in  = -14.29 min; SE = 2.91; p < .001), no other secondary (e.g., soft-tissue recession, keratinized mucosa height, and bone level changes, as well as BoP, SoP, profuse bleeding and implant loss rates) or exploratory (i.e., early wound healing, aesthetics, surgical and total treatment duration, surgery difficulty, intra-operative bleeding, and adverse events) outcome demonstrated statistically significant differences between groups. CONCLUSIONS: The present multi-centre randomized clinical trial did not demonstrate an added effect of performing sub-marginal instrumentation 6 weeks before the surgical treatment of peri-implantitis. Larger clinical trials are however needed to confirm the present findings (Clinicaltrials.gov: NCT03620331).

Prevalence and risk/protective indicators of buccal soft tissue dehiscence around dental implants.

AIM: To evaluate the prevalence of buccal peri-implant soft tissue dehiscence (PISTD) in anterior implants and to identify the risk/protective indicators of PISTD in implants not suffering peri-implantitis. MATERIALS AND METHODS: 240 randomly selected patients from a university clinic database were invited to participate in the present cross-sectional study. Those who accepted, after the evaluation of their medical and dental records, were clinically examined to assess the prevalence of buccal PISTD in non-molar implants. Multilevel multivariate logistic regression analyses were then carried out to identify those factors associated either positively (risk) or negatively (protective) with buccal PISTD in implants without peri-implantitis. RESULTS: 92 patients with a total of 272 dental implants were analysed. At implant-level, the prevalence of buccal PISTD was 16.9%, while when selecting only implants without peri-implantitis it was 12.0%. Buccal PISTD was present in 26.7% of the implants diagnosed with peri-implantitis. The following factors were identified as risk/protective indicators of buccal PISTD in implants without peri-implantitis: malposition (too buccal vs. correct: OR=14.67), thin peri-implant phenotype (OR=8.31), presence of at least one adjacent tooth (OR=0.08) and presence of abutment (OR=0.12). CONCLUSIONS: PISTD are highly prevalent among patients with dental implants in this university-based population, and several factors were identified as risk and protective indicators of PISTD in implants not suffering peri-implantitis.

Prevalence and risk/protective indicators of peri-implant diseases: A university-representative cross-sectional study.

AIM: To evaluate the prevalence of peri-implant diseases and to identify risk/protective indicators of peri-implantitis. MATERIALS AND METHODS: Two hundred and forty randomly selected patients from a university clinic database were invited to participate. Those who accepted, once data from their medical and dental history were collected, were examined clinically and radiographically to assess the prevalence of peri-implant health and diseases. Peri-implantitis was defined as the presence of BoP/SoP together with radiographic bone levels (BL) ≧2 mm. An intermediate peri-implant health category between peri-implant mucositis and peri-implantitis was also identified, defined by the presence of BoP/SoP together with 1 mm ≦BL < 2 mm. A multilevel multivariate logistic regression analysis was carried out to identify those factors associated either positively (risk) or negatively (protective) with peri-implantitis. RESULTS: Ninety-nine patients with a total of 458 dental implants were analyzed. The prevalences of pre-periimplantitis and of peri-implantitis were, respectively, 31.3% and 56.6% at patient-level, while 31.7% and 27.9% at implant level. The following factors were identified as risk indicators for peri-implantitis: smoking (OR = 3.59; 95% CI: 1.52-8.45), moderate/severe periodontitis (OR = 2.77; 95% CI: 1.20-6.36), <16 remaining teeth (OR = 2.23; 95% CI: 1.05-4.73), plaque (OR = 3.49; 95% CI: 1.13-10.75), implant malposition (too vestibular: OR = 2.85; 95% CI: 1.17-6.93), implant brand (Nobel vs. Straumann: OR = 4.41;95% CI: 1.76-11.09), restoration type (bridge vs. single crown: OR = 2.47; 95% CI: 1.19-5.12), and trauma as reason of tooth loss (vs. caries: OR = 6.51; 95% CI: 1.45-29.26). Conversely, the following factors were identified as protective indicators: interproximal flossing/brushing (OR = 0.27; 95% CI: 0.11-0.68), proton pump inhibitors (OR = 0.08; 95% CI: 0.01-0.90), and anticoagulants (OR = 0.08; 95% CI: 0.01-0.56). CONCLUSIONS: Peri-implant diseases are highly prevalent among patients with dental implants in this university-based population. Several factors were identified as risk- and protective- indicators of peri-implantitis.

Clinical signs, symptoms, perceptions, and impact on quality of life in patients suffering from peri-implant diseases: a university-representative cross-sectional study.

OBJECTIVES: To study the symptoms and perception reported by patients with peri-implant diseases, as well as their signs and their potential impact on the oral health quality of life. MATERIAL AND METHODS: Two hundred and forty randomly selected patients were invited to participate. As part of the history assessment, the patient OHIP-14Sp was evaluated together with, for each implant, the patient perception regarding the peri-implant health status and the history of pain, spontaneous discomfort, bleeding, suppuration, swelling, and discomfort during brushing. As part of the clinical examination, the following potential signs of peri-implant diseases were collected: probing pocket depth (PPD), mucosal dehiscence (MD), extent of BoP, presence of SoP, and visual signs of redness and swelling. Those parameters were analyzed in relation to the actual peri-implant health diagnosis. RESULTS: Ninety-nine patients with a total of 458 dental implants were studied. Even in case of peri-implantitis, 88.9% of the implants were perceived by the patients as healthy. The total OHIP-14Sp sum score did not differ in relation to the peri-implant health diagnosis. Increased reports of spontaneous discomfort, bleeding, swelling, and discomfort during brushing were observed in presence of disease. However, only a minor proportion of implants with peri-implant diseases presented symptoms. PPD ≥ 6 mm was more frequent in diseased than in healthy implants (p < .01), while PPD ≥ 8 in pre-peri-implantitis/peri-implantitis than in healthy/mucositis implants (p < .01). Implants with peri-implantitis showed higher MD than implants without peri-implantitis (p < .01). CONCLUSION: Peri-implant diseases are in most cases asymptomatic and not perceived by the patients. Despite being unable to accurately discriminate between peri-implant mucositis and peri-implantitis, PPD and MD resulted as the only two clinical signs associated with pre-peri-implantitis/peri-implantitis.

Solving Challenges in Static Computer-Assisted Guided Surgery for Posterior Open-End Situations.

This technical note serves as a practical guide for clinicians aiming to provide solutions to optimize the precision of static computer-assisted implant surgery (sCAIS) and the success of implant placement in free-end situations. Five methods are introduced for enhancing surgical guide stabilization and improving the accuracy of implant placements in situations lacking stabilizing adjacent teeth. Techniques include the use of keratinized soft tissues, implant-borne stabilizers, lateral fixation pins, transitional implants, and digital bone segmentation for guide support. Each method is evaluated for its potential to address the specific challenges faced in sCAIS, aiming to contribute to the field through practical solutions for clinicians.

The Use of CAD-CAM Templates in Lateral Sinus Floor Augmentation Procedure: A Systematic Review.

INTRODUCTION: Maxillary sinus floor augmentation is a procedure known for its long-term success and predictable outcomes. However, the perforation of the Schneiderian membrane remains the most common complication associated with this procedure. OBJECTIVE: This systematic review aims to determine the presence of complications during maxillary sinus floor augmentation procedures using CAD-CAM surgical templates. MATERIAL AND METHODS: An electronic search was carried out in MEDLINE (via PubMed), Web of Science, and Scopus. A descriptive analysis of the data was performed. Studies that have performed lateral sinus floor augmentation were included in the inclusion criteria. The CAD-CAM surgical template design and the intraoperative complications were registered. RESULTS: A total of 13 studies were included. Seven were case reports, four were case series, and two were randomized clinical trials. A total of 94 lateral SFA procedures were included (84 using CADCAM templates and 10 without using templates). Three of the 84 maxillary sinus floor augmentation procedures using a CAD-CAM template presented intraoperative complications. CONCLUSIONS: Maxillary sinus floor augmentation performed by using CAD-CAM surgical templates could be related to low rates of complications, however, due to the heterogeneity of the articles included, more standardized studies are needed to confirm these outcomes.

Computer-Assisted Implant Planning: A Review of Data Registration Techniques.

Computer-assisted implant planning allows for a comprehensive treatment plan by combining radiographic data provided by a Cone Beam Computed Tomography (CBCT) with surface optical scan (IOs) data that includes patient intraoral situation and the intended restorative planning. Integrating a tailored restorative design with the patient's anatomical conditions through virtual implant planning allows for an ideal bio-restorative treatment planning to maximize biological, functional, and esthetic outcomes. This article discusses dataset registration techniques that combine radiographic CBCT data with restorative information as the main path to create a virtual patient. The described techniques include the use of removable radiographic templates with radiopaque markers, dual scan technique, and direct digital file registration of intra-oral scans using anatomical references. Depending on the individual clinical situation, different factors must be considered to appropriately select methods that achieve an optimal registration of diverse datasets. An inherent challenge lies in the presence of scattering artifacts in CBCT scans. Two approaches are proposed for these situations - the use of chairside-fabricated composite resin markers or adhesive spot-markers fabricated for the use with CBCT scans. Both techniques exhibit limitations that need to be taken into consideration. Further approaches should be developed for situations involving scattering in CBCT.

Clinical efficacy of two vertical soft tissue augmentation techniques for peri-implant crestal bone level stability: A randomized clinical trial.

OBJECTIVES: This study aimed to compare the efficacy of two techniques-acellular dermal matrix (ADM) grafting and tenting technique (TT)-for soft tissue height (STH) augmentation simultaneous to implant placement to minimize peri-implant crestal bone level (CBL) changes. METHODS: Forty patients with a healed single mandibular posterior edentulous site with a thin soft tissue phenotype were enrolled. Twenty patients received simultaneously to implant placement ADM grafting, while the others received submerged healing abutment (TT). Clinical peri-implant soft tissue height and radiographic CBL changes were measured at restoration delivery and 1-year follow-up. RESULTS: Both techniques effectively increased soft tissue thickness, resulting in a final average STH of 3.4 ± 0.5 mm after augmentation. On average, soft tissue increased by 1.6 ± 0.5 mm in group ADM and by 1.8 ± 0.4 mm in group TT after augmentation. In Group ADM, mesial CBL decreased from 0.4 ± 0.3 mm to 0.1 ± 0.2 mm, and distal CBL decreased from 0.5 ± 0.3 mm to 0.2 ± 0.3 mm over 1 year. In Group TT, mesial CBL remained stable at 0.3 ± 0.2 mm, while distal CBL reduced slightly from 0.5 ± 0.5 mm to 0.3 ± 0.2 mm. Both groups showed minimal changes in CBL, indicating great stability (pmesial = 0.003, pdistal = 0.004). TT was particularly effective in preventing mesial bone loss (pmesial = 0.019). The mesial CBL changes significantly differed between groups (p = 0.019), and not significantly at distal sites (p = 0.944). Neither treatment exhibited significant bone remodeling below the implant shoulder. CONCLUSION: This study suggests that both techniques were successful in STH augmentation, and they may effectively reduce peri-implant crestal bone level changes, with TT being slightly superior. TT was more prone to post-surgical complications. This RCT was not registered before participant recruitment and randomization.

Influence of mucosal tissue height on implant crestal bone: A 10-year follow-up of a controlled clinical trial.

OBJECTIVE: To evaluate the 10-year influence of soft tissue height (STH) on crestal bone level changes (CBC) in bone-level implants with non-matching internal conical connections. MATERIAL & METHODS: From the initial 97 patients, 59 (19 men, 40 women, age 55.86 ± 9.5 years) returned for the recall visit. Based on baseline STH, they were categorized into T1 (thin STH ≤2 mm, n = 33), T2 (thin STH augmented with allogenic tissue matrix (ATM), n = 32), and C (thick STH >2 mm, n = 32). Implants were placed in the posterior mandible using a one-stage approach and received single screw-retained restorations. Clinical (PPD, BOP, PI) and radiographic examinations were conducted after 10 years, with CBC calculated mesial and distal to each implant. RESULTS: After 10 years, implants in surgically thickened (T2) or naturally thick STH (C) showed bone gains of 0.57 ± 0.55 mm and 0.56 ± 0.40 mm, respectively (p < 0.0001) shifting from an initial CBC of -0.21 ± 0.33 mm to 0.36 ± 0.29 mm in the thick STH group and -0.2 ± 0.35 mm to 0.37 ± 0.29 mm in the surgically thickened STH group. Implants in naturally thin STH yielded a non-significant trend of bone loss (-0.12 ± 0.41 mm; p > 0.05). CONCLUSIONS: Implants in thin STH (≤2 mm) exhibited greater CBC over the study period. Significant bone gains were observed in thick STH cases, indicating that naturally thick STH or STH augmentation with ATM may contribute to maintain CBC in long-term around implants. CLINICAL SIGNIFICANCE: This is the first long-term follow-up study suggesting that adequate soft tissue height around implants helps maintain stable peri­implant bone levels. While tissue thickness plays a key role, other factors also interact with peri­implant tissue height to sustain crestal bone stability over time.

Tooth autotransplantation with adjunctive application of enamel matrix derivatives using a digital workflow: A prospective case series.

OBJECTIVES: Digital protocols and bioactive materials may reduce complications and improve tooth autotransplantation (ATT) success and survival rates. This prospective study assesses the performance of a fully digital autotransplantation protocol of close-apex molars with the adjunctive application of Enamel Matrix Derivatives (EMD). METHODS: Twelve adult patients with 13 hopeless molar teeth were replaced with autotransplantation of closed apex third molars. Outcomes, including success and survival rates, clinical, endodontic, radiographic, patient-reported outcome measures (PROMs), and digital image assessments, were conducted over a two-year follow-up period. RESULTS: Survival and success rates were 100% and 91.2%, respectively, with no progressive inflammatory or replacement root resorption (ankylosis) except for one tooth presenting radiographic furcation involvement. A significant probing depth reduction of 2.4 ± 2.58 mm and CAL gains of 2.8 ± 3.03 mm were observed in transplanted teeth compared to the hopeless receptor teeth. Radiographic bone levels remained stable throughout the study period (-0.37 ± 0.66 mm), and digital image assessments showed minimal alveolar ridge width changes (-0.32 to -0.7 mm) and gingival margin changes (-0.95 to -1.27 mm) from baseline to last visit. PROMs indicated very high patient satisfaction. CONCLUSION: The use of a digital ATT protocol with adjunctive use of EMD in closed-apex third molars demonstrated promising short-term high success and survival rates. Additionally, this type of therapy adequately preserves the dimensions of the alveolar ridge in the receptor site. CLINICAL SIGNIFICANCE: This is the first prospective clinical study examining the effect of a digital tooth autotransplantation protocol combined with the application of EMD. It demonstrates that this approach is an effective treatment for replacing hopeless teeth and also validates the digital assessment of ATT alveolar ridge preservation at the recipient site.

Milled PMMA, a Material for Long-Term Implant Supported Fixed Complete Dental Prostheses.

Traditionally, metal-ceramics, metal-reinforced acrylics, and more recently full-contour or layered zirconia have been the materials of choice for definitive fixed implant-supported rehabilitations. Polymethyl Methacrylate (PMMA) is commonly used in implant dentistry for the fabrication of implant-supported interim prostheses and as milled or 3D printed prototypes. This article describes a novel protocol to prosthetically restore a completely edentulous patient following a digital workflow, with fixed, screw-retained, implant-supported prostheses fabricated from CAD/CAM milled polymethyl methacrylate (PMMA), with no metal substructure. After two years follow up in terms of esthetics, phonetics, function and biological tissue response, the outcome remains functional and free of mechanical, biomechanical or biological complications. The aim of this article is to illustrate the feasibility of using milled PMMA as viable definitive prosthetic material for the fixed implant rehabilitation of edentulous patients.

Preoperative HbA1c and Blood Glucose Measurements in Diabetes Mellitus before Oral Surgery and Implantology Treatments.

Diabetes mellitus has become a worldwide epidemic and is frequently accompanied by a number of complications proportional to the duration of hyperglycemia. The aim of this narrative review is to assess the most up-to-date guidelines on DM provided by both diabetes and dental associations. Furthermore, to gather evidence on the uni/bidirectional relationships of elevated HbA1c levels on dental surgery, implantology, bone augmentation, and periodontology and to demonstrate the importance of measuring HbA1c levels before invasive dental treatments. HbA1c and blood glucose measurements are a minimally invasive method for preventing complications in diabetes mellitus. The authors conducted a literature review to determine which oral conditions are affected by diabetes mellitus. MEDLINE served as a source with the use of a specific search key. Regarding oral complications of diabetes, prevention is the most vital factor. With this publication, we hope to assist physicians and dentists to make prompt diagnoses and to help in recognizing various oral manifestations of diabetes and follow the existing guidelines.

Is Antibiotic Prophylaxis Necessary before Dental Implant Procedures in Patients with Orthopaedic Prostheses? A Systematic Review.

As the population ages, more and more patients with orthopaedic prostheses (OPs) require dental implant treatment. Surveys of dentists and orthopaedic surgeons show that prophylactic antibiotics (PAs) are routinely prescribed with a very high frequency in patients with OPs who are about to undergo dental procedures. The present study aims to determine the need to prescribe prophylactic antibiotic therapy in patients with OPs treated with dental implants to promote their responsible use and reduce the risk of antimicrobial resistance. An electronic search of the MEDLINE database (via PubMed), Web of Science, LILACS, Google Scholar, and OpenGrey was carried out. The criteria used were those described by the PRISMA® Statement. No study investigated the need to prescribe PAs in patients with OPs, so four studies were included on the risk of infections of OPs after dental treatments with varying degrees of invasiveness. There is no evidence to suggest a relationship between dental implant surgeries and an increased risk of OP infection; therefore, PAs in these patients are not justified. However, the recommended doses of PAs in dental implant procedures in healthy patients are the same as those recommended to avoid infections of OPs.