RESUMO
BACKGROUND: Several conventional genomic Bayesian (or no Bayesian) prediction methods have been proposed including the standard additive genetic effect model for which the variance components are estimated with mixed model equations. In recent years, deep learning (DL) methods have been considered in the context of genomic prediction. The DL methods are nonparametric models providing flexibility to adapt to complicated associations between data and output with the ability to adapt to very complex patterns. MAIN BODY: We review the applications of deep learning (DL) methods in genomic selection (GS) to obtain a meta-picture of GS performance and highlight how these tools can help solve challenging plant breeding problems. We also provide general guidance for the effective use of DL methods including the fundamentals of DL and the requirements for its appropriate use. We discuss the pros and cons of this technique compared to traditional genomic prediction approaches as well as the current trends in DL applications. CONCLUSIONS: The main requirement for using DL is the quality and sufficiently large training data. Although, based on current literature GS in plant and animal breeding we did not find clear superiority of DL in terms of prediction power compared to conventional genome based prediction models. Nevertheless, there are clear evidences that DL algorithms capture nonlinear patterns more efficiently than conventional genome based. Deep learning algorithms are able to integrate data from different sources as is usually needed in GS assisted breeding and it shows the ability for improving prediction accuracy for large plant breeding data. It is important to apply DL to large training-testing data sets.
Assuntos
Aprendizado Profundo , Modelos Genéticos , Animais , Teorema de Bayes , Genoma , Genômica , Fenótipo , Seleção GenéticaRESUMO
Genomic prediction models are often calibrated using multi-generation data. Over time, as data accumulates, training data sets become increasingly heterogeneous. Differences in allele frequency and linkage disequilibrium patterns between the training and prediction genotypes may limit prediction accuracy. This leads to the question of whether all available data or a subset of it should be used to calibrate genomic prediction models. Previous research on training set optimization has focused on identifying a subset of the available data that is optimal for a given prediction set. However, this approach does not contemplate the possibility that different training sets may be optimal for different prediction genotypes. To address this problem, we recently introduced a sparse selection index (SSI) that identifies an optimal training set for each individual in a prediction set. Using additive genomic relationships, the SSI can provide increased accuracy relative to genomic-BLUP (GBLUP). Non-parametric genomic models using Gaussian kernels (KBLUP) have, in some cases, yielded higher prediction accuracies than standard additive models. Therefore, here we studied whether combining SSIs and kernel methods could further improve prediction accuracy when training genomic models using multi-generation data. Using four years of doubled haploid maize data from the International Maize and Wheat Improvement Center (CIMMYT), we found that when predicting grain yield the KBLUP outperformed the GBLUP, and that using SSI with additive relationships (GSSI) lead to 5-17% increases in accuracy, relative to the GBLUP. However, differences in prediction accuracy between the KBLUP and the kernel-based SSI were smaller and not always significant.
Assuntos
Modelos Genéticos , Zea mays , Genoma , Genômica , Fenótipo , Polimorfismo de Nucleotídeo Único , Zea mays/genéticaRESUMO
The objective was to estimate allelic and genotypic frequencies for loci associated with meat quality in a Mexican population of Braunvieh cattle. Information was obtained from 300 animals genotyped with the Genomic Profile Bovine LD chip of 30K and 50K SNPs. After the final edition, including quality control, the data contained information for 12 loci of the CAPN1, CAPN3, CAPN5, CAPN14, DGAT1, DGAT2, TG, ANK1, and MADH3 genes. Allelic and genotypic frequencies and Hardy-Weinberg equilibrium were estimated with the Cervus 3.0.7 software. The studied population markers were in Hardy-Weinberg equilibrium, except for those associated with CAPN1, DGAT1, and MADH3. Frequencies higher than those reported for other breeds were found for genotypes associated with meat softness, higher marbling score, lower quantity of saturated fatty acids, and lower shear force (CAPN1 and DGAT2). There were similarities with frequencies reported for Bos taurus breeds for the CAPN3 and TG genes. For the DGAT1 and ANK1 genes, the frequencies of the desired genotypes were low. A marker for DGAT1 and another for MADH3 were monomorphic. The results of this study are encouraging in terms of the potential of the Braunvieh population studied for breeding programs aiming to increase meat quality. The breed has strengths that could be used either by crossbreeding to generate heterozygous animals or by selection to increase frequencies of valuable alleles.
Assuntos
Carne , Polimorfismo de Nucleotídeo Único , Alelos , Animais , Bovinos/genética , Frequência do Gene , Marcadores Genéticos , GenótipoRESUMO
KEY MESSAGE: Genomic selection with a multiple-year training population dataset could accelerate early-stage testcross testing by skipping the first-stage yield testing, which significantly saves the time and cost of early-stage testcross testing. With the development of doubled haploid (DH) technology, the main task for a maize breeder is to estimate the breeding values of thousands of DH lines annually. In early-stage testcross testing, genomic selection (GS) offers the opportunity of replacing expensive multiple-environment phenotyping and phenotypic selection with lower-cost genotyping and genomic estimated breeding value (GEBV)-based selection. In the present study, a total of 1528 maize DH lines, phenotyped in multiple-environment trials in three consecutive years and genotyped with a low-cost per-sample genotyping platform of rAmpSeq, were used to explore how to implement GS to accelerate early-stage testcross testing. Results showed that the average prediction accuracy estimated from the cross-validation schemes was above 0.60 across all the scenarios. The average prediction accuracies estimated from the independent validation schemes ranged from 0.23 to 0.32 across all the scenarios, when the one-year datasets were used as training population (TRN) to predict the other year data as testing population (TST). The average prediction accuracies increased to a range from 0.31 to 0.42 across all the scenarios, when the two-years datasets were used as TRN. The prediction accuracies increased to a range from 0.50 to 0.56, when the TRN consisted of two-years of breeding data and 50% of third year's data converted from TST to TRN. This information showed that GS with a multiple-year TRN set offers the opportunity to accelerate early-stage testcross testing by skipping the first-stage yield testing, which significantly saves the time and cost of early-stage testcross testing.
Assuntos
Genoma de Planta , Haploidia , Melhoramento Vegetal , Seleção Genética , Zea mays/genética , Cruzamentos Genéticos , Genótipo , Modelos Genéticos , FenótipoRESUMO
Genomic selection and high-throughput phenotyping (HTP) are promising tools to accelerate breeding gains for high-yielding and climate-resilient wheat varieties. Hence, our objective was to evaluate them for predicting grain yield (GY) in drought-stressed (DS) and late-sown heat-stressed (HS) environments of the International maize and wheat improvement center's elite yield trial nurseries. We observed that the average genomic prediction accuracies using fivefold cross-validations were 0.50 and 0.51 in the DS and HS environments, respectively. However, when a different nursery/year was used to predict another nursery/year, the average genomic prediction accuracies in the DS and HS environments decreased to 0.18 and 0.23, respectively. While genomic predictions clearly outperformed pedigree-based predictions across nurseries, they were similar to pedigree-based predictions within nurseries due to small family sizes. In populations with some full-sibs in the training population, the genomic and pedigree-based prediction accuracies were on average 0.27 and 0.35 higher than the accuracies in populations with only one progeny per cross, indicating the importance of genetic relatedness between the training and validation populations for good predictions. We also evaluated the item-based collaborative filtering approach for multivariate prediction of GY using the green normalized difference vegetation index from HTP. This approach proved to be the best strategy for across-nursery predictions, with average accuracies of 0.56 and 0.62 in the DS and HS environments, respectively. We conclude that GY is a challenging trait for across-year predictions, but GS and HTP can be integrated in increasing the size of populations screened and evaluating unphenotyped large nurseries for stress-resilience within years.
Assuntos
Clima , Modelos Genéticos , Melhoramento Vegetal/métodos , Triticum/genética , Grão Comestível/genética , Genoma de Planta , Genômica , Genótipo , Ensaios de Triagem em Larga Escala , Modelos Lineares , Linhagem , Fenótipo , Característica Quantitativa HerdávelRESUMO
KEY MESSAGE: We were able to obtain good prediction accuracy in genomic selection with ~ 2000 GBS-derived SNPs. SNPs in genic regions did not improve prediction accuracy compared to SNPs in intergenic regions. Since genotyping can represent an important cost in genomic selection, it is important to minimize it without compromising the accuracy of predictions. The objectives of the present study were to explore how a decrease in the unit cost of genotyping impacted: (1) the number of single nucleotide polymorphism (SNP) markers; (2) the accuracy of the resulting genotypic data; (3) the extent of coverage on both physical and genetic maps; and (4) the prediction accuracy (PA) for six important traits in barley. Variations on the genotyping by sequencing protocol were used to generate 16 SNP sets ranging from ~ 500 to ~ 35,000 SNPs. The accuracy of SNP genotypes fluctuated between 95 and 99%. Marker distribution on the physical map was highly skewed toward the terminal regions, whereas a fairly uniform coverage of the genetic map was achieved with all but the smallest set of SNPs. We estimated the PA using three statistical models capturing (or not) the epistatic effect; the one modeling both additivity and epistasis was selected as the best model. The PA obtained with the different SNP sets was measured and found to remain stable, except with the smallest set, where a significant decrease was observed. Finally, we examined if the localization of SNP loci (genic vs. intergenic) affected the PA. No gain in PA was observed using SNPs located in genic regions. In summary, we found that there is considerable scope for decreasing the cost of genotyping in barley (to capture ~ 2000 SNPs) without loss of PA.
Assuntos
Hordeum/genética , Melhoramento Vegetal , Polimorfismo de Nucleotídeo Único , Mapeamento Cromossômico , Epistasia Genética , Marcadores Genéticos , Técnicas de Genotipagem , Modelos Genéticos , FenótipoRESUMO
KEY MESSAGE: A new genomic model that incorporates genotype × environment interaction gave increased prediction accuracy of untested hybrid response for traits such as percent starch content, percent dry matter content and silage yield of maize hybrids. The prediction of hybrid performance (HP) is very important in agricultural breeding programs. In plant breeding, multi-environment trials play an important role in the selection of important traits, such as stability across environments, grain yield and pest resistance. Environmental conditions modulate gene expression causing genotype × environment interaction (G × E), such that the estimated genetic correlations of the performance of individual lines across environments summarize the joint action of genes and environmental conditions. This article proposes a genomic statistical model that incorporates G × E for general and specific combining ability for predicting the performance of hybrids in environments. The proposed model can also be applied to any other hybrid species with distinct parental pools. In this study, we evaluated the predictive ability of two HP prediction models using a cross-validation approach applied in extensive maize hybrid data, comprising 2724 hybrids derived from 507 dent lines and 24 flint lines, which were evaluated for three traits in 58 environments over 12 years; analyses were performed for each year. On average, genomic models that include the interaction of general and specific combining ability with environments have greater predictive ability than genomic models without interaction with environments (ranging from 12 to 22%, depending on the trait). We concluded that including G × E in the prediction of untested maize hybrids increases the accuracy of genomic models.
Assuntos
Interação Gene-Ambiente , Genômica/métodos , Modelos Genéticos , Zea mays/genética , Meio Ambiente , Genoma de Planta , Genótipo , Hibridização Genética , Modelos Estatísticos , Fenótipo , Melhoramento Vegetal , Polimorfismo de Nucleotídeo ÚnicoRESUMO
BACKGROUND: Multi-layer perceptron (MLP) and radial basis function neural networks (RBFNN) have been shown to be effective in genome-enabled prediction. Here, we evaluated and compared the classification performance of an MLP classifier versus that of a probabilistic neural network (PNN), to predict the probability of membership of one individual in a phenotypic class of interest, using genomic and phenotypic data as input variables. We used 16 maize and 17 wheat genomic and phenotypic datasets with different trait-environment combinations (sample sizes ranged from 290 to 300 individuals) with 1.4 k and 55 k SNP chips. Classifiers were tested using continuous traits that were categorized into three classes (upper, middle and lower) based on the empirical distribution of each trait, constructed on the basis of two percentiles (15-85 % and 30-70 %). We focused on the 15 and 30 % percentiles for the upper and lower classes for selecting the best individuals, as commonly done in genomic selection. Wheat datasets were also used with two classes. The criteria for assessing the predictive accuracy of the two classifiers were the area under the receiver operating characteristic curve (AUC) and the area under the precision-recall curve (AUCpr). Parameters of both classifiers were estimated by optimizing the AUC for a specific class of interest. RESULTS: The AUC and AUCpr criteria provided enough evidence to conclude that PNN was more accurate than MLP for assigning maize and wheat lines to the correct upper, middle or lower class for the complex traits analyzed. Results for the wheat datasets with continuous traits split into two and three classes showed that the performance of PNN with three classes was higher than with two classes when classifying individuals into the upper and lower (15 or 30 %) categories. CONCLUSIONS: The PNN classifier outperformed the MLP classifier in all 33 (maize and wheat) datasets when using AUC and AUCpr for selecting individuals of a specific class. Use of PNN with Gaussian radial basis functions seems promising in genomic selection for identifying the best individuals. Categorizing continuous traits into three classes generally provided better classification than when using two classes, because classification accuracy improved when classes were balanced.
Assuntos
Genômica/métodos , Redes Neurais de Computação , Triticum/genética , Zea mays/genética , Área Sob a Curva , Interação Gene-Ambiente , Modelos Genéticos , Fenótipo , Polimorfismo de Nucleotídeo Único , Curva ROCRESUMO
KEY MESSAGE: Predictability estimated through cross-validation approach showed moderate to high level; hence, genomic selection approach holds great potential for biofortification breeding to enhance grain zinc and iron concentrations in wheat. Wheat (Triticum aestivum L.) is a major staple crop, providing 20 % of dietary energy and protein consumption worldwide. It is an important source of mineral micronutrients such as zinc (Zn) and iron (Fe) for resource poor consumers. Genomic selection (GS) approaches have great potential to accelerate development of Fe- and Zn-enriched wheat. Here, we present the results of large-scale genomic and phenotypic data from the HarvestPlus Association Mapping (HPAM) panel consisting of 330 diverse wheat lines to perform genomic predictions for grain Zn (GZnC) and Fe (GFeC) concentrations, thousand-kernel weight (TKW) and days to maturity (DTM) in wheat. The HPAM lines were phenotyped in three different locations in India and Mexico in two successive crop seasons (2011-12 and 2012-13) for GZnC, GFeC, TKW and DTM. The genomic prediction models revealed that the estimated prediction abilities ranged from 0.331 to 0.694 for Zn and from 0.324 to 0.734 for Fe according to different environments, whereas prediction abilities for TKW and DTM were as high as 0.76 and 0.64, respectively, suggesting that GS holds great potential in biofortification breeding to enhance grain Zn and Fe concentrations in bread wheat germplasm.
Assuntos
Ferro/análise , Sementes/anatomia & histologia , Triticum/genética , Zinco/análise , DNA de Plantas/genética , Meio Ambiente , Genoma de Planta , Genótipo , Índia , México , Modelos Genéticos , Modelos Estatísticos , Fenótipo , Polimorfismo de Nucleotídeo Único , Triticum/químicaRESUMO
Genome-wide association studies (GWAS) have detected large numbers of variants associated with complex human traits and diseases. However, the proportion of variance explained by GWAS-significant single nucleotide polymorphisms has been usually small. This brought interest in the use of whole-genome regression (WGR) methods. However, there has been limited research on the factors that affect prediction accuracy (PA) of WGRs when applied to human data of distantly related individuals. Here, we examine, using real human genotypes and simulated phenotypes, how trait complexity, marker-quantitative trait loci (QTL) linkage disequilibrium (LD), and the model used affect the performance of WGRs. Our results indicated that the estimated rate of missing heritability is dependent on the extent of marker-QTL LD. However, this parameter was not greatly affected by trait complexity. Regarding PA our results indicated that: (a) under perfect marker-QTL LD WGR can achieve moderately high prediction accuracy, and with simple genetic architectures variable selection methods outperform shrinkage procedures and (b) under imperfect marker-QTL LD, variable selection methods can achieved reasonably good PA with simple or moderately complex genetic architectures; however, the PA of these methods deteriorated as trait complexity increases and with highly complex traits variable selection and shrinkage methods both performed poorly. This was confirmed with an analysis of human height.
Assuntos
Doença/genética , Genoma Humano , Modelos Genéticos , Locos de Características Quantitativas , Simulação por Computador , Estudo de Associação Genômica Ampla , Humanos , Desequilíbrio de Ligação , Análise de RegressãoRESUMO
Many genetic models (including models for epistatic effects as well as genetic-by-environment) involve covariance structures that are Hadamard products of lower rank matrices. Implementing these models requires factorizing large Hadamard product matrices. The available algorithms for factorization do not scale well for big data, making the use of some of these models not feasible with large sample sizes. Here, based on properties of Hadamard products and (related) Kronecker products, we propose an algorithm that produces an approximate decomposition that is orders of magnitude faster than the standard eigenvalue decomposition. In this article, we describe the algorithm, show how it can be used to factorize large Hadamard product matrices, present benchmarks, and illustrate the use of the method by presenting an analysis of data from the northern testing locations of the G × E project from the Genomes to Fields Initiative (n â¼ 60,000). We implemented the proposed algorithm in the open-source "tensorEVD" R package.
Assuntos
Algoritmos , Modelos Genéticos , Genoma , Tamanho da AmostraRESUMO
Selecting and mating parents in conventional phenotypic and genomic selection are crucial. Plant breeding programs aim to improve the economic value of crops, considering multiple traits simultaneously. When traits are negatively correlated and/or when there are missing records in some traits, selection becomes more complex. To address this problem, we propose a multitrait selection approach using the Multitrait Parental Selection (MPS) R package-an efficient tool for genetic improvement, precision breeding, and conservation genetics. The package employs Bayesian optimization algorithms and three loss functions (Kullback-Leibler, Energy Score, and Multivariate Asymmetric Loss) to identify parental candidates with desirable traits. The software's functionality includes three main functions-EvalMPS, FastMPS, and ApproxMPS-catering to different data availability scenarios. Through the presented application examples, the MPS R package proves effective in multitrait genomic selection, enabling breeders to make informed decisions and achieve strong performance across multiple traits.
Assuntos
Teorema de Bayes , Melhoramento Vegetal , Seleção Genética , Melhoramento Vegetal/métodos , Software , AlgoritmosRESUMO
Striga hermonthica (Del.) Benth., a parasitic weed, causes substantial yield losses in maize production in sub-Saharan Africa (SSA). Breeding for Striga resistance in maize is constrained by limited genetic diversity for Striga resistance within the elite germplasm and phenotyping capacity under artificial Striga infestation. Genomics-enabled approaches have the potential to accelerate identification of Striga resistant lines for hybrid development. The objectives of this study were to evaluate the accuracy of genomic selection for traits associated with Striga resistance and grain yield (GY) and to predict genetic values of tested and untested doubled haploid (DH) maize lines. We genotyped 606 DH lines with 8,439 rAmpSeq markers. A training set of 116 DH lines crossed to two testers was phenotyped under artificial Striga infestation at three locations in Kenya. Heritability for Striga resistance parameters ranged from 0.38â0.65 while that for GY was 0.54. The prediction accuracies for Striga resistance-associated traits across locations, as determined by cross validation (CV) were 0.24 to 0.53 for CV0 and from 0.20 to 0.37 for CV2. For GY, the prediction accuracies were 0.59 and 0.56 for CV0 and CV2, respectively. The results revealed 300 DH lines with desirable genomic estimated breeding values (GEBVs) for reduced number of emerged Striga plants (STR) at 8, 10, and 12 weeks after planting. The GEBVs of DH lines for Striga resistance associated traits in the training and testing sets were similar in magnitude. These results highlight the potential application of genomic selection in breeding for Striga resistance in maize. The integration of genomic-assisted strategies and DH technology for line development coupled with forward breeding for major adaptive traits will enhance genetic gains in breeding for Striga resistance in maize.
RESUMO
Bread wheat (Triticum aestivum L.) is a globally important food crop, which was domesticated about 8-10,000 years ago. Bread wheat is an allopolyploid, and it evolved from two hybridization events of three species. To widen the genetic base in breeding, bread wheat has been re-synthesized by crossing durum wheat (Triticum turgidum ssp. durum) and goat grass (Aegilops tauschii Coss), leading to so-called synthetic hexaploid wheat (SHW). We applied the quantitative genetics tools of "hybrid prediction"-originally developed for the prediction of wheat hybrids generated from different heterotic groups - to a situation of allopolyploidization. Our use-case predicts the phenotypes of SHW for three quantitatively inherited global wheat diseases, namely tan spot (TS), septoria nodorum blotch (SNB), and spot blotch (SB). Our results revealed prediction abilities comparable to studies in 'traditional' elite or hybrid wheat. Prediction abilities were highest using a marker model and performing random cross-validation, predicting the performance of untested SHW (0.483 for SB to 0.730 for TS). When testing parents not necessarily used in SHW, combination prediction abilities were slightly lower (0.378 for SB to 0.718 for TS), yet still promising. Despite the limited phenotypic data, our results provide a general example for predictive models targeting an allopolyploidization event and a method that can guide the use of genetic resources available in gene banks.
Assuntos
Aegilops , Genoma de Planta , Tetraploidia , Triticum , Triticum/genética , Aegilops/genética , Diploide , Melhoramento Vegetal , Poliploidia , Hibridização Genética , Fenótipo , Doenças das Plantas/genética , Doenças das Plantas/microbiologiaRESUMO
A rapid, eco-friendly, and simple method for the synthesis of long-lasting (2 years) silver nanoparticles (AgNPs) is reported using aqueous leaf and petal extracts of Tagetes erecta L. The particles were characterized using UV-Visible spectrophotometry and the analytical and crystallographic techniques of transmission electron microscopy (TEM). The longevity of the AgNPs was studied using UV-Vis and high-resolution TEM. The antibacterial activity of the particles against Erwinia amylovora was evaluated using the Kirby-Bauer disk diffusion method. The results were analyzed using ANOVA and Tukey's test (p ≤ 0.05). Both the leaf and petal extracts produced AgNPs, but the leaf extract (1 mL) was long-lasting and quasi-spherical (17.64 ± 8.87 nm), with an absorbance of UV-Vis λmax 433 and a crystalline structure (fcc, 111). Phenols, flavonoids, tannins, and terpenoids which are associated with -OH, C=O, and C=C were identified in the extracts and could act as reducing and stabilizing agents. The best antibacterial activity was obtained with a nanoparticle concentration of 50 mg AgNPs L-1. The main contribution of the present research is to present a sustainable method for producing nanoparticles which are stable for 2 years and with antibacterial activity against E. amylovora, one of most threatening pathogens to pear and apple productions.
RESUMO
In the field of plant breeding, various machine learning models have been developed and studied to evaluate the genomic prediction (GP) accuracy of unseen phenotypes. Deep learning has shown promise. However, most studies on deep learning in plant breeding have been limited to small datasets, and only a few have explored its application in moderate-sized datasets. In this study, we aimed to address this limitation by utilizing a moderately large dataset. We examined the performance of a deep learning (DL) model and compared it with the widely used and powerful best linear unbiased prediction (GBLUP) model. The goal was to assess the GP accuracy in the context of a five-fold cross-validation strategy and when predicting complete environments using the DL model. The results revealed the DL model outperformed the GBLUP model in terms of GP accuracy for two out of the five included traits in the five-fold cross-validation strategy, with similar results in the other traits. This indicates the superiority of the DL model in predicting these specific traits. Furthermore, when predicting complete environments using the leave-one-environment-out (LOEO) approach, the DL model demonstrated competitive performance. It is worth noting that the DL model employed in this study extends a previously proposed multi-modal DL model, which had been primarily applied to image data but with small datasets. By utilizing a moderately large dataset, we were able to evaluate the performance and potential of the DL model in a context with more information and challenging scenario in plant breeding.
RESUMO
Development of high yielding cowpea varieties coupled with good taste and rich in essential minerals can promote consumption and thus nutrition and profitability. The sweet taste of cowpea grain is determined by its sugar content, which comprises mainly sucrose and galacto-oligosaccharides (GOS) including raffinose and stachyose. However, GOS are indigestible and their fermentation in the colon can produce excess intestinal gas, causing undesirable bloating and flatulence. In this study, we aimed to examine variation in grain sugar and mineral concentrations, then map quantitative trait loci (QTLs) and estimate genomic-prediction (GP) accuracies for possible application in breeding. Grain samples were collected from a multi-parent advanced generation intercross (MAGIC) population grown in California during 2016-2017. Grain sugars were assayed using high-performance liquid chromatography. Grain minerals were determined by inductively coupled plasma-optical emission spectrometry and combustion. Considerable variation was observed for sucrose (0.6-6.9%) and stachyose (2.3-8.4%). Major QTLs for sucrose (QSuc.vu-1.1), stachyose (QSta.vu-7.1), copper (QCu.vu-1.1) and manganese (QMn.vu-5.1) were identified. Allelic effects of major sugar QTLs were validated using the MAGIC grain samples grown in West Africa in 2017. GP accuracies for minerals were moderate (0.4-0.58). These findings help guide future breeding efforts to develop mineral-rich cowpea varieties with desirable sugar content.
Assuntos
Locos de Características Quantitativas , Vigna , Locos de Características Quantitativas/genética , Vigna/genética , Açúcares , Melhoramento Vegetal , Minerais , Grão Comestível/genética , Genômica , SacaroseRESUMO
Genomic selection (GS) in wheat breeding programs is of great interest for predicting the genotypic values of individuals, where both additive and nonadditive effects determine the final breeding value of lines. While several simulation studies have shown the efficiency of rapid-cycling GS strategies for parental selection or population improvement, their practical implementations are still lacking in wheat and other crops. In this study, we demonstrate the potential of rapid-cycle recurrent GS (RCRGS) to increase genetic gain for grain yield (GY) in wheat. Our results showed a consistent realized genetic gain for GY after 3 cycles of recombination (C1, C2, and C3) of bi-parental F1s, when summarized across 2 years of phenotyping. For both evaluation years combined, genetic gain through RCRGS reached 12.3% from cycle C0 to C3 and realized gain was 0.28 ton ha-1 per cycle with a GY from C0 (6.88 ton ha-1) to C3 (7.73 ton ha-1). RCRGS was also associated with some changes in important agronomic traits that were measured (days to heading, days to maturity, and plant height) but not selected for. To account for these changes, we recommend implementing GS together with multi-trait prediction models.
Assuntos
Seleção Genética , Triticum , Humanos , Triticum/genética , Melhoramento Vegetal , Pão , Fenótipo , Genótipo , Genômica , Genoma de Planta , Grão Comestível/genética , Modelos GenéticosRESUMO
Modern GWAS studies use an enormous sample size and ultra-high density SNP genotypes. These conditions reduce the mapping resolution of marginal association tests-the method most often used in GWAS. Multi-locus Bayesian Variable Selection (BVS) offers a one-stop solution for powerful and precise mapping of risk variants and polygenic risk score (PRS) prediction. We show (with an extensive simulation) that multi-locus BVS methods can achieve high power with a low false discovery rate and a much better mapping resolution than marginal association tests. We demonstrate the performance of BVS for mapping and PRS prediction using data from blood biomarkers from the UK-Biobank (~300,000 samples and ~5.5 million SNPs). The article is accompanied by open-source R-software that implement the methods used in the study and scales to biobank-sized data.
Assuntos
Bancos de Espécimes Biológicos , Herança Multifatorial , Humanos , Teorema de Bayes , Software , Simulação por Computador , Estudo de Associação Genômica Ampla/métodos , Polimorfismo de Nucleotídeo ÚnicoRESUMO
OBJECTIVE: The objective was to compare (pedigree-based) best linear unbiased prediction (BLUP), genomic BLUP (GBLUP), and single-step GBLUP (ssGBLUP) methods for genomic evaluation of growth traits in a Mexican Braunvieh cattle population. METHODS: Birth (BW), weaning (WW), and yearling weight (YW) data of a Mexican Braunvieh cattle population were analyzed with BLUP, GBLUP, and ssGBLUP methods. These methods are differentiated by the additive genetic relationship matrix included in the model and the animals under evaluation. The predictive ability of the model was evaluated using random partitions of the data in training and testing sets, consistently predicting about 20% of genotyped animals on all occasions. For each partition, the Pearson correlation coefficient between adjusted phenotypes for fixed effects and non-genetic random effects and the estimated breeding values (EBV) were computed. RESULTS: The random contemporary group (CG) effect explained about 50%, 45%, and 35% of the phenotypic variance in BW, WW, and YW, respectively. For the three methods, the CG effect explained the highest proportion of the phenotypic variances (except for YW-GBLUP). The heritability estimate obtained with GBLUP was the lowest for BW, while the highest heritability was obtained with BLUP. For WW, the highest heritability estimate was obtained with BLUP, the estimates obtained with GBLUP and ssGBLUP were similar. For YW, the heritability estimates obtained with GBLUP and BLUP were similar, and the lowest heritability was obtained with ssGBLUP. Pearson correlation coefficients between adjusted phenotypes for non-genetic effects and EBVs were the highest for BLUP, followed by ssBLUP and GBLUP. CONCLUSION: The successful implementation of genetic evaluations that include genotyped and non-genotyped animals in our study indicate a promising method for use in genetic improvement programs of Braunvieh cattle. Our findings showed that simultaneous evaluation of genotyped and non-genotyped animals improved prediction accuracy for growth traits even with a limited number of genotyped animals.