The Electrochemical Behavior of TiN/316LSS Material in Simulated Body Fluid Solution.

We report on the fabrication and the electrochemical behavior of TiN film on the 316L stainless steel (316LSS) material in simulated body fluid (SBF) solution for implant application. The characterization results indicate that the coated TiN is completely crystalline with (111) crystal orientation. Electrochemical results of 316LSS and TiN/316LSS material after 21 days of immersion in SBF show that the durability of the TiN/316LSS is much higher than that of 316LSS, which registers a very low corrosion current density (about tens of nA cm(-2)). The formation of hydroxyapatite on the surface of the TiN/316LSS is also confirmed by SEM, EDX, X-ray and IR spectroscopy.

Efficient nickel or copper oxides decorated graphene-polyaniline interface for application in selective methanol sensing.

Graphene sheets decorated with nickel or copper oxides that were anchored on polyaniline (denoted as PANI-graphene/NiO and PANI-graphene/CuO) were prepared by a simple, easy to-control electrochemical method and applied as novel materials for sensitive and selective methanol sensing. The fabricated sensors exhibited good electrocatalytic activity, appropriate dynamic linear range (20-1300 mM), sensitivity (0.2-1.5 µA mM-1 cm-2) and excellent selectivity towards methanol. It should be highlighted from the selectivity tests that no significant interference was observed from ethanol and other alcohols. To our best knowledge, using inexpensive but efficient transition metals like Ni, Cu instead of Pt, Pd and their composites with PANI, graphene would be scientifically novel and practically feasible approach for sensor fabrication that could be potentially used to identify methanol adulteration in counterfeit alcoholic beverages.