RESUMO
Currently, most reported 2D conjugated metal-organic frameworks (2D c-MOFs) are based on planar polycyclic aromatic hydrocarbons (PAHs) with symmetrical functional groups, limiting the possibility of introducing additional substituents to fine-tune the crystallinity and electrical properties. Herein, a novel class of wavy 2D c-MOFs with highly substituted, core-twisted hexahydroxy-hexa-cata-benzocoronenes (HH-cHBCs) as ligands is reported. By tailoring the substitution of the c-HBC ligands with electron-withdrawing groups (EWGs), such as fluorine, chlorine, and bromine, it is demonstrated that the crystallinity and electrical conductivity at the molecular level can be tuned. The theoretical calculations demonstrate that F-substitution leads to a more reversible coordination bonding between HH-cHBCs and copper metal center, due to smaller atomic size and stronger electron-withdrawing effect. As a result, the achieved F-substituted 2D c-MOF exhibits superior crystallinity, comprising ribbon-like single crystals up to tens of micrometers in length. Moreover, the F-substituted 2D c-MOF displays higher electrical conductivity (two orders of magnitude) and higher charge carrier mobility (almost three times) than the Cl-substituted one. This work provides a new molecular design strategy for the development of wavy 2D c-MOFs and opens a new route for tailoring the coordination reversibility by ligand substitution toward increased crystallinity and superior electric conductivity.
RESUMO
Formation of highly symmetric skeletal elements in demosponges, called spicules, follows a unique biomineralization mechanism in which polycondensation of an inherently disordered amorphous silica is guided by a highly ordered proteinaceous scaffold, the axial filament. The enzymatically active proteins, silicateins, are assembled into a slender hybrid silica/protein crystalline superstructure that directs the morphogenesis of the spicules. Furthermore, silicateins are known to catalyze the formation of a large variety of other technologically relevant organic and inorganic materials. However, despite the biological and biotechnological importance of this macromolecule, its tertiary structure was never determined. Here we report the atomic structure of silicatein and the entire mineral/organic hybrid assembly with a resolution of 2.4 Å. In this work, the serial X-ray crystallography method was successfully adopted to probe the 2-µm-thick filaments in situ, being embedded inside the skeletal elements. In combination with imaging and chemical analysis using high-resolution transmission electron microscopy, we provide detailed information on the enzymatic activity of silicatein, its crystallization, and the emergence of a functional three-dimensional silica/protein superstructure in vivo. Ultimately, we describe a naturally occurring mineral/protein crystalline assembly at atomic resolution.
RESUMO
As the size of magnetic devices continuously decreases, the creation of three-dimensional nanomagnets and the understanding of their magnetic configurations become increasingly important for modern applications. Here, by progressive nucleation during epitaxial nanoelectrodeposition, we synthesize single-crystal iron nanocuboids with sizes ranging 10 to 200 nm on one sample. The size-dependent magnetic configurations of these nanocuboids are studied by quantitative magnetic force microscopy and electron holography. In conjunction, a "magnetic configuration versus size" phase diagram is established via micromagnetic simulations. Both experiment and theory reveal a sequential transition from Landau pattern to vortex and finally single domain when decreasing the sizes of the nanocuboids. The combinatorial-like approach leads to a quantitative understanding of the magnetic configurations of the nanomagnets in a broad size range. It can be transferred to other materials and shapes and thereby presents an advanced route to enrich the material library for future nanodevice design.
RESUMO
Isoreticular chemically stable two-dimensional imine covalent organic frameworks (COFs), further denoted as DUT-175 and DUT-176, are obtained in a reaction of 4,4'-bis(9H-carbazol-9-yl)biphenyl tetraaldehyde with phenyldiamine and benzidine. The crystal structures, solved and refined from the powder X-ray diffraction data and confirmed by high-resolution transmission electron microscopy, indicate AA-stacked layer structures. Both structures feature distorted hexagonal channel pores, assuring remarkable porosity (SBET = 1071 m2 g-1 for DUT-175 and SBET = 1062 m2 g-1 for DUT-176), as confirmed by adsorption of gases and vapors. The complex conjugated π system of the COFs involves electron-rich carbazole building units, which in combination with the imine groups allow reversible pH-dependent protonation of the frameworks, accompanied by charge transfer and shift of the absorption bands in the UV-vis spectrum. The sigmoidal shape of the water vapor adsorption and desorption isotherms with a steep adsorption step at p/p0 = 0.4-0.6 in combination with excellent stability over dozens of adsorption and desorption cycles ranks these COFs among the best materials for indoor humidity control applications.
RESUMO
Among other new device concepts, nickel silicide (NiSix)-based Schottky barrier nanowire transistors are projected to supplement down-scaling of the complementary metal-oxide semiconductor (CMOS) technology as its physical limits are reached. Control over the NiSix phase and its intrusions into the nanowire is essential for superior performance and down-scaling of these devices. Several works have shown control over the phase, but control over the intrusion lengths has remained a challenge. To overcome this, we report a novel millisecond-range flash lamp annealing (FLA)-based silicidation process. Nanowires are fabricated on silicon-on-insulator substrates using a top-down approach. Subsequently, Ni silicidation experiments are carried out using FLA. It is demonstrated that this silicidation process gives unprecedented control over the silicide intrusions. Scanning electron microscopy and high-resolution transmission electron microscopy are performed for structural characterization of the silicide. FLA temperatures are estimated with the help of simulations.
RESUMO
To establish high-bandwidth chip-to-chip interconnects in optoelectronic integrated circuits, requires high-performance photon emitters and signal receiving components. Regarding the photodetector, fast device concepts like Schottky junction devices, large carrier mobility materials and shrinking the channel length will enable higher operation speed. However, integrating photodetectors in highly scaled ICs technologies is challenging due to the efficiency-speed trade-off. Here, we report a scalable and CMOS-compatible approach for an ultra-scaled germanium (Ge) based photodetector with tunable polarity. The photodetector is composed of a Ge Schottky barrier field effect transistor with monolithic aluminum (Al) source/drain contacts, offering plasmon assisted and polarization-resolved photodetection. The ultra-scaled Ge photodetector with a channel length of only 200 nm shows high responsivity of aboutR = 424 A W-1and a maximum polarization sensitivity ratio of TM/TE = 11.
RESUMO
Chains of metallic nanoparticles sustain strongly confined surface plasmons with relatively low dielectric losses. To exploit these properties in applications, such as waveguides, the fabrication of long chains of low disorder and a thorough understanding of the plasmon-mode properties, such as dispersion relations, are indispensable. Here, we use a wrinkled template for directed self-assembly to assemble chains of gold nanoparticles. With this up-scalable method, chain lengths from two particles (140 nm) to 20 particles (1500 nm) and beyond can be fabricated. Electron energy-loss spectroscopy supported by boundary element simulations, finite-difference time-domain, and a simplified dipole coupling model reveal the evolution of a band of plasmonic waveguide modes from degenerated single-particle modes in detail. In striking difference from plasmonic rod-like structures, the plasmon band is confined in excitation energy, which allows light manipulations below the diffraction limit. The non-degenerated surface plasmon modes show suppressed radiative losses for efficient energy propagation over a distance of 1500 nm.
RESUMO
Identifying the intrinsic electrocatalytic activity of nanomaterials is challenging, as their characterization usually requires additives and binders whose contributions are difficult to dissect. Herein, we use nano impact electrochemistry as an additive-free method to overcome this problem. Due to the efficient mass transport at individual catalyst nanoparticles, high current densities can be realized. High-resolution bright-field transmission electron microscopy and selected area diffraction studies of the catalyst particles before and after the experiments provide valuable insights in the transformation of the nanomaterials during harsh oxygen evolution reaction (OER) conditions. We demonstrate this for 4 nm sized CoFe2O4 spinel nanoparticles. It is revealed that these particles retain their size and crystal structure even after OER at current densities as high as several kA·m-2. The steady-state current scales with the particle size distribution and is limited by the diffusion of produced oxygen away from the particle. This versatilely applicable method provides new insights into intrinsic nanocatalyst activities, which is key to the efficient development of improved and precious metal-free catalysts for renewable energy technologies.
RESUMO
Fine-tuning chemistry by doping with transition metals enables new perspectives for exploring Kitaev physics on a two-dimensional (2D) honeycomb lattice of α-RuCl3, which is promising in the field of quantum information protection and quantum computation. The key parameters to vary by doping are both Heisenberg and Kitaev components of the nearest-neighbor exchange interaction between the Jeff = 1/2 Ru3+ spins, depending strongly on the peculiarities of the crystal structure. Here, we present crystal growth by chemical vapor transport and structure elucidation of a solid solution series Ru1- xCr xCl3 (0 ≤ x ≤ 1), with Cr3+ ions coupled to the Ru3+ Kitaev host. The Cr3+ substitution preserves the honeycomb type lattice of α-RuCl3 and creates mixed occupancy of Ru/Cr sites without cationic order within the layers as confirmed by single-crystal X-ray diffraction and transmission electron microscopy investigations. In contrast to high-quality single crystals of α-RuCl3 with ABAB-stacked layers, the ternary compounds demonstrate a significant stacking disorder along the c-axis direction as evidenced by X-ray diffraction and high resolution scanning transmission electron microscopy (HR-STEM). Raman spectra of substituted samples are in line with the symmetry conservation of the parent lattice upon chromium doping. At the same time, our magnetic susceptibility data indicate that the Kitaev physics of α-RuCl3 is increasingly suppressed by the dominant spin-only driven magnetism of Cr3+ ( S = 3/2) in Ru1- xCr xCl3.
RESUMO
Recently simulation groups have reported the lanthanide series elements as the dopants that have the strongest effect on the stabilization of the ferroelectric non-centrosymmetric orthorhombic phase in hafnium oxide. This finding confirms experimental results for lanthanum and gadolinium showing the highest remanent polarization values of all hafnia-based ferroelectric films until now. However, no comprehensive overview that links structural properties to the electrical performance of the films in detail is available for lanthanide-doped hafnia. La:HfO2 appears to be a material with a broad window of process parameters, and accordingly, by optimization of the La content in the layer, it is possible to improve the performance of the material significantly. Variations of the La concentration leads to changes in the crystallographic structure in the bulk of the films and at the interfaces to the electrode materials, which impacts the spontaneous polarization, internal bias fields, and with this the field cycling behavior of the capacitor structure. Characterization results are compared to other dopants like Si, Al, and Gd to validate the advantages of the material in applications such as semiconductor memory devices.
RESUMO
Segmented magnetic nanowires are a promising route for the development of three dimensional data storage techniques. Such devices require a control of the coercive field and the coupling mechanisms between individual magnetic elements. In our study, we investigate electrodeposited nanomagnets within host templates using vibrating sample magnetometry and observe a strong dependence between nanowire length and coercive field (25 nm-5 µm) and diameter (25-45 nm). A transition from a magnetization reversal through coherent rotation to domain wall propagation is observed at an aspect ratio of approximately 2. Our results are further reinforced via micromagnetic simulations and angle dependent hysteresis loops. The found behavior is exploited to create nanowires consisting of a fixed and a free segment in a spin-valve like structure. The wires are released from the membrane and electrically contacted, displaying a giant magnetoresistance effect that is attributed to individual switching of the coupled nanomagnets. We develop a simple analytical model to describe the observed switching phenomena and to predict stable and unstable regimes in coupled nanomagnets of certain geometries.
RESUMO
To achieve sustainable production of H2 fuel through water splitting, low-cost electrocatalysts for the hydrogen-evolution reaction (HER) and the oxygen-evolution reaction (OER) are required to replace Pt and IrO2 catalysts. Herein, for the first time, we present the interface engineering of novel MoS2 /Ni3 S2 heterostructures, in which abundant interfaces are formed. For OER, such MoS2 /Ni3 S2 heterostructures show an extremely low overpotential of ca. 218â mV at 10â mA cm(-2) , which is superior to that of the state-of-the-art OER electrocatalysts. Using MoS2 /Ni3 S2 heterostructures as bifunctional electrocatalysts, an alkali electrolyzer delivers a current density of 10â mA cm(-2) at a very low cell voltage of ca. 1.56â V. In combination with DFT calculations, this study demonstrates that the constructed interfaces synergistically favor the chemisorption of hydrogen and oxygen-containing intermediates, thus accelerating the overall electrochemical water splitting.
RESUMO
A systematic structural analysis of FePt, CuAu, and Au icosahedral nanoparticles is presented. The uncovered particles are prepared by inert gas condensation and thermally equilibrated through in-flight optical annealing. Aberration-corrected high-resolution transmission electron microscopy reveals that the crystal lattice is significantly expanded near the particle surface. These experimental findings are corroborated by molecular statics simulations that show that this near-surface strain originates from both intrinsic strain due to the icosahedral structure and a partial segregation of the larger of the two alloy constituents to the particle surface.
RESUMO
Materials drastically alter their electronic properties when being reduced to the nanoscale due to quantum effects. Concerning semiconductors, the band gap is expected to broaden as a result of the quantum confinement. In this study we report on the successful synthesis of wide bandgap SiC nanowires (with great potential for applications) and the local determination of their band gap. Their value was found to be higher with respect to bulk SiC. The nanowires are grown as a heterostructure, i.e. encapsulated in carbon nanofibres via dc hot-filament Plasma-Enhanced Chemical Vapour Deposition on the Si/SiO2 substrate. The structure of the as-produced carbon nanofibres was characterized by means of aberration-corrected high-resolution transmission electron microscopy. Two different pure SiC polytypes, namely the 3C (cubic) and the 6H (hexagonal) as well as distorted structures are observed. The SiC nanowires have diameters in the range of 10-15 nm and lengths of several hundred nanometers. The formation of the SiC is a result of the substrate etching during the growth of the CNFs and a subsequent simultaneous diffusion of not only carbon, but also silicon through the catalyst particle.
RESUMO
This work presents a systematic study that evaluates the feasibility and reliability of local band gap measurements of Cu(In,Ga)Se2 thin films by valence electron energy-loss spectroscopy (VEELS). The compositional gradients across the Cu(In,Ga)Se2 layer cause variations in the band gap energy, which are experimentally determined using a monochromated scanning transmission electron microscope (STEM). The results reveal the expected band gap variation across the Cu(In,Ga)Se2 layer and therefore confirm the feasibility of local band gap measurements of Cu(In,Ga)Se2 by VEELS. The precision and accuracy of the results are discussed based on the analysis of individual error sources, which leads to the conclusion that the precision of our measurements is most limited by the acquisition reproducibility, if the signal-to-noise ratio of the spectrum is high enough. Furthermore, we simulate the impact of radiation losses on the measured band gap value and propose a thickness-dependent correction. In future work, localized band gap variations will be measured on a more localized length scale to investigate, e.g., the influence of chemical inhomogeneities and dopant accumulations at grain boundaries.
Assuntos
Teste de Materiais/métodos , Semicondutores , Cobre , Gálio , Índio , Selênio , Energia SolarRESUMO
Conjugated polymers often show efficient charge carrier transport along their backbone which is a primary factor in the electrical behavior of Organic Field Effect Transistor (OFETs) devices fabricated from these materials. Herein, a solution shearing procedure is reported to fabricate micro/nano wires from a diketopyrrolopyrrole (DPP)-based polymer. Millimeter to nanometer long polymer wires orientated in the coating direction are developed after a thorough analysis of the deposition conditions. It shows several morphological regimes-film, transition, and wires and experimentally derive a phase diagram for the parameters coating speed and surface energy of the substrate. The as-fabricated wires are isolated, which is confirmed by optical, atomic force, and scanning electron microscopy. Beside the macroscopic alignment of wires, cross-polarized optical microscopy images show strong birefringence suggesting a high degree of molecular orientation. This is further substantiated by polarized UV-Vis-NIR spectroscopy, selected area electron diffraction transmission electron microscopy, and grazing-incidence wide-angle X-ray scattering. Finally, an enhanced electrical performance of single wire OFETs is observed with a 15-fold increase in effective charge carrier mobility to 1.57 cm2 V-1 s-1 over devices using films (0.1 cm2 V-1 s-1 ) with similar values for on/off current ratio and threshold voltage.
RESUMO
The present paper reports the fabrication of novel types of hybrid fibrous photocatalysts by combining block copolymer (BCP) templating, sol-gel processing, and coaxial electrospinning techniques. Coaxial electrospinning produces core-shell nanofibers (NFs), which are converted into hollow porous TiO2 NFs using an oxidative calcination step. Hybrid BCP micelles comprising a single plasmonic nanoparticle (NP) in their core and thereof derived silica-coated core-shell particles are utilized as precursors to generate yolk-shell type particulate inclusions in photocatalytically active NFs. The catalytic and photocatalytic activity of calcined NFs comprising different types of yolk-shell particles is systematically investigated and compared. Interestingly, calcined NFs comprising silica-coated yolk-shells demonstrate enhanced catalytic and photocatalytic performance despite the presence of silica shell separating plasmonic NP from the TiO2 matrix. Electromagnetic simulations indicate that this enhancement is caused by a localized surface plasmon resonance and a confinement effect in silica-coated yolk-shells embedded in porous TiO2 NFs. Utilization of the coaxially electrospun TiO2 NFs in combination with yolk-shells comprising plasmonic NPs reveals to be a potent method for the photocatalytic decomposition of numerous pollutants. It is worth noting that this study stands as the first occurrence of combining yolk-shells (Au@void@SiO2) with porous electrospun NFs (TiO2) for photocatalytic purposes and gaining an understanding of plasmon and confinement effects for photocatalytic performance. This approach represents a promising route for fabricating highly active and up-scalable fibrous photocatalytic systems.
RESUMO
The paper studies oxidation resistance and electrical conductivity of dense coatings produced by vacuum-arc deposition technique on α-titanium thin (0.1 mm) substrate using a hot pressed Ti2AlC-TiC target. The coatings were deposited at low (7 mA/cm2) and high (15 mA/cm2) current densities on the substrate and marked LCD and HCD, respectively. This provided different local chemical and phase compositions of the coatings. It was found that phase compositions of the coatings differ from that of the target. The HCD coating has high oxidation resistance evaluated in terms of the specific weight gain (Δm/S = 0.06 mg/cm2) as well as high surface electrical conductivity (σ = 1.23·106 S/m) after long-term (1000 h) holding at 600 °C in the air due to the formation of an over thin (450 nm) Ti-Al-(C, O, N) near-surface layer. The thin titanium substrate with such Ti-Al-C coating is recommended as a lightweight interconnect of an intermediate-temperature solid oxide fuel cell.