Prediction of moisture content for a single maize kernel based on viscoelastic properties.

BACKGROUND: The rapid and accurate detection of moisture content is important to ensure maize quality. However, existing technologies for rapidly detecting moisture content often suffer from the use of costly equipment, stringent environmental requirements, or limited accuracy. This study proposes a simple and effective method for detecting the moisture content of single maize kernels based on viscoelastic properties. RESULTS: Two types of viscoelastic experiments were conducted involving three different parameters: relaxation tests (initial loads: 60, 80, 100 N) and frequency-sweep tests (frequencies: 0.6, 0.8, 1 Hz). These experiments generated corresponding force-time graphs and viscoelastic parameters were extracted based on the four-element Maxwell model. Then, viscoelastic parameters and data of force-time graphs were employed as input variables to explore the relationships with moisture content separately. The impact of different preprocessing methods and feature time variables on model accuracy was explored based on force-time graphs. The results indicate that models utilizing the force-time data were more accurate than those utilizing viscoelastic parameters. The best model was established by partial least squares regression based on S-G smoothing data from relaxation tests conducted with initial force of 100 N. The correlation coefficient and the root mean square error of the calibration set were 0.954 and 0.021, respectively. The corresponding values of the prediction set were 0.905 and 0.029, respectively. CONCLUSIONS: This study confirms the potential for accurate and fast detection of moisture content in single maize kernels using viscoelastic properties, which provides a novel approach for the detection of various components in cereals. © 2024 Society of Chemical Industry.

The Incidence Trend of Papillary Thyroid Carcinoma in the United States During 2003-2017.

BACKGROUND: The rapid increase in the detection rate of thyroid cancer over the past few decades has caused some unexpected economic burdens. However, that of papillary thyroid carcinoma (PTC) seems to have had the opposite trend, which is worthy of further comprehensive exploration. METHODS: The Surveillance, Epidemiology, and End Results 18 database was used to identify patients with PTC diagnosed during 2003-2017. The incidence trends were analyzed using joinpoint analysis and an age-period-cohort model. RESULTS: The overall PTC incidence rate increased from 9.9 to 16.1 per 100 000 between 2003 and 2017. The joinpoint analysis indicated that the incidence growth rate began to slow down in 2009 (annual percentage change [APC] = 3.1%, 95% confidence interval [CI] = 1.9%-4.4%). After reaching its peak in 2015, it began to decrease by 2.8% (95% CI = -4.6% to -1.0%) per year. The stratified analysis indicated that the incidence patterns of different sexes, age groups, races, and tumor stages and sizes had similar downward trends, including for the localized (APC = -4.5%, 95% CI = -7% to -1.9%) and distant (APC = -1.3%, 95% CI = -2.7% to -.1%) stages, and larger tumors (APC = -4%, 95% CI = -12% to 4.7%). The age-period-cohort model indicated a significant period effect on PTC, which gradually weakened after 2008-2012. The cohort effect indicates that the risk of late birth cohorts is gradually stabilizing and lower than that of early birth cohorts. CONCLUSION: The analysis results of the recent downward trend and period effect for the incidence of each subgroup further support the important role of correcting overdiagnosis in reducing the prevalence of PTC. Future research needs to analyze more-recent data to verify these downward trends.

Antithrombotic Therapy Improves ICU Mortality of Septic Patients with Peripheral Vascular Disease.

Objective: The effectiveness of antithrombotic drugs for treating sepsis is controversial. Here, we explore the association between antithrombotic therapy and intensive care unit (ICU) mortality for septic patients with peripheral vascular disease. Methods: This retrospective cohort study uses data from the Medical Information Mart for Intensive Care (MIMIC)-III database. Kaplan-Meier survival analyses were used to examine mortality among different groups. Cox regression and marginal structural Cox models (MSCMs) were used to adjust for confounding factors. Main Results. The final cohort from the MIMIC-III database included 776 patients, of which 701 survived and 75 perished. The anticoagulant (AC) group and the antiplatelet-anticoagulation (AC-AP) group survived better than the group without antithrombotic treatment (non-AT). The AC and AC-AP groups showed a 0.363-fold and 0.373-fold risk of ICU mortality, respectively, compared with the non-AT group when controlling for age, gender, CRRT, alcohol, heart failure, hypertension, diabetes, obesity, renal failure, liver disease, INR, PT, PPT, and SpO2. Antiplatelet therapy did not reduce ICU mortality. The same trends were apparent from the MSCM. In addition, the AC-AP group exhibited a lower risk of bleeding complications. Conclusion: Although the antithrombotic group (AC and AC-AP groups) demonstrated a higher sequential organ failure assessment (SOFA) score than the group without antithrombotic treatment (non-AT group), the risk of ICU mortality was lower without increasing the risk of bleeding complications. Our study further suggested that anticoagulation therapy may benefit the prognosis of septic patients with peripheral vascular disease.

RAD-6: pyrimidine synthesis and radiation sensitivity in Caenorhabditis elegans.

The Caenorhabditis elegans rad-6 (radiation-sensitive-6) mutant was isolated over 25 years ago in a genetic screen that identified mutants with enhanced sensitivity to DNA damaging agents. In the present paper we describe the molecular identification of the rad-6 gene and reveal that it encodes the bifunctional UMP synthase protein, which carries catalytic activities for OPRTase (orotate phosphoribosyltransferase) and ODCase (orotate monophosphate decarboxylase), key enzymes in the de novo pathway of pyrimidine synthesis. Mutations in genes encoding de novo pathway enzymes cause varying degrees of lethality and pleiotropic phenotypes in many organisms, including humans. We have examined how the absence of rad-6 activity leads to both UV-C hypersensitivity and a decline in both metabolic rate and lifespan. We discuss how rad-6 mutants adapt to the loss of the de novo pathway through a dependency on pyrimidine salvage. We establish further that rad-6(mn160) mutants lack ODCase activity because they are resistant to the cytotoxic effects of 5-FOA (5-fluoroorotic acid). Our results have also led to the identification of a metabolic sensor affecting survival and metabolism, which is dependent on the maternal rad-6 genotype.

Differentially expressed microRNA cohorts in seed development may contribute to poor grain filling of inferior spikelets in rice.

BACKGROUND: The inferior spikelets are defined to be those at portions where the grains receive less photosynthetic products during the seed development. The typical inferior spikelets are physically located on the proximal secondary branches in a rice panicle and traditionally characterized by a later flowering time and a slower grain-filling rate, compared to those so-called superior spikelets. Grains produced on the inferior spikelets are consequently under-developed and lighter in weight than those formed on the superior spikelets. MicroRNAs (miRNAs) are recognized as key players in regulating plant development through post-transcriptional gene regulations. We previously presented the evidence that miRNAs may influence grain-filling rate and played a role in determining the grain weight and yield in rice. RESULTS: In this study, further analyses of the expressed small RNAs in superior and inferior spikelets were conducted at five distinct developmental stages of grain development. Totally, 457 known miRNAs and 13 novel miRNAs were analyzed, showing a differential expression of 141 known miRNAs between superior and inferior spikelets with higher expression levels of most miRNAs associated with the superior than the inferior spikelets during the early stage of grain filling. Genes targeted by those differentially expressed miRNAs (i.e. miR156, miR164, miR167, miR397, miR1861, and miR1867) were recognized to play roles in multiple developmental and signaling pathways related to plant hormone homeostasis and starch accumulation. CONCLUSIONS: Our data established a complicated link between miRNA dynamics and the traditional role of hormones in grain filling and development, providing new insights into the widely accepted concepts of the so-called superior and inferior spikelets in rice production.

Minced Beef Meat Paste Characteristics: Gel Properties, Water Distribution, and Microstructures Regulated by Medium Molecular Mass of γ-Poly-Glutamic Acid.

The influences of various m-γ-PGA (0.08-0.20%, w/w) concentrations on the properties of minced beef meat paste in terms of rheological properties, texture, moisture distribution, and microstructures were evaluated. The results indicated that m-γ-PGA enhanced the water-holding capacity, gel strength, texture, and whiteness of the minced beef meat paste. Based on the microstructural results, m-γ-PGA helped form a more organized and compact gel, thereby limiting the migration of water through the gel matrix. In contrast to the control group, the water-holding property, gel strength, and whiteness of minced meat paste gels with m-γ-PGA content of 0.12% increased from 75.89%, 584.51 g·cm, and 61.83 to 79.91%, 780.87 g·cm, and 62.54, respectively (p < 0.05), exhibiting the highest water-holding property and gel strength. Thus, m-γ-PGA exhibits great potential for minced meat paste products as a healthy gel water retainer and enhancer in low-fat meat products.

Construction of short tandem target mimic (STTM) to block the functions of plant and animal microRNAs.

Small RNAs are widespread in plants and animals. They largely include microRNAs (miRNAs) and short interfering RNAs (siRNAs), and they play key roles in gene and chromatin regulations. Here we describe in detail the method for an effective construction of the recently developed short tandem target mimic (STTM) technology to block small RNA functions in plants and animals. STTM is a powerful technology complementing the previous target mimic (TM) in plants and the miRNA sponge, as well as the recently defined endogenous competing RNA (CeRNA) in animals. We expect STTM will not only be effective in blocking small RNA functions in plants but will also become a popular approach in animals.

Factor analysis based on SHapley Additive exPlanations for sepsis-associated encephalopathy in ICU mortality prediction using XGBoost - a retrospective study based on two large database.

Objective: Sepsis-associated encephalopathy (SAE) is strongly linked to a high mortality risk, and frequently occurs in conjunction with the acute and late phases of sepsis. The objective of this study was to construct and verify a predictive model for mortality in ICU-dwelling patients with SAE. Methods: The study selected 7,576 patients with SAE from the MIMIC-IV database according to the inclusion criteria and randomly divided them into training (n = 5,303, 70%) and internal validation (n = 2,273, 30%) sets. According to the same criteria, 1,573 patients from the eICU-CRD database were included as an external test set. Independent risk factors for ICU mortality were identified using Extreme Gradient Boosting (XGBoost) software, and prediction models were constructed and verified using the validation set. The receiver operating characteristic (ROC) and the area under the ROC curve (AUC) were used to evaluate the discrimination ability of the model. The SHapley Additive exPlanations (SHAP) approach was applied to determine the Shapley values for specific patients, account for the effects of factors attributed to the model, and examine how specific traits affect the output of the model. Results: The survival rate of patients with SAE in the MIMIC-IV database was 88.6% and that of 1,573 patients in the eICU-CRD database was 89.1%. The ROC of the XGBoost model indicated good discrimination. The AUCs for the training, test, and validation sets were 0.908, 0.898, and 0.778, respectively. The impact of each parameter on the XGBoost model was depicted using a SHAP plot, covering both positive (acute physiology score III, vasopressin, age, red blood cell distribution width, partial thromboplastin time, and norepinephrine) and negative (Glasgow Coma Scale) ones. Conclusion: A prediction model developed using XGBoost can accurately predict the ICU mortality of patients with SAE. The SHAP approach can enhance the interpretability of the machine-learning model and support clinical decision-making.

Competing risk analysis of cardiovascular death in patients with primary gallbladder cancer.

BACKGROUND: Developments in medical technology are resulting in continuous decreases in the cancer mortality rate of patients with gallbladder cancer, while non-cancer deaths in cancer patients are becoming more common. The main cause of this is cardiovascular mortality (CVM). The purpose of this study was to determine the CVM risk in patients with primary gallbladder cancer (PGC). METHODS: We extracted information on patients in the SEER database who were diagnosed with PGC from 2004 to 2015, compared CVM in patients with PGC with the general United States population, and calculated standardized mortality rates (SMRs) and the absolute excess risk. A competing risks model was used to identify and analyze the independent risk factors for cardiovascular death in patients with PGC. RESULTS: This study included 5925 patients, 247 of whom died from cardiovascular disease. The SMR of cardiovascular death in patients with PGC was 15.84 (95% confidence interval: 15.83-15.85), and the SMR was slightly lower in male than female patients. The competing risks analysis indicated that age, marital status, cancer cell differentiation, chemotherapy status, and year of diagnosis were risk factors for cardiovascular death in patients with PGC. CONCLUSIONS: The CVM risk is considerably higher in patients with PGC than in the general population. It is therefore very necessary to apply cardioprotective interventions to patients with PGC.

Detection of Specific Volatile Organic Compounds in Tribolium castaneum (Herbst) by Solid-Phase Microextraction and Gas Chromatography-Mass Spectrometry.

The red flour beetle, Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae), is a major storage pest that could lead to a wide range of damage. Its secretions have a significant impact on the quality of stored grain and food, leading to serious food safety problems such as grain spoilage and food carcinogenesis. This study investigates new detection techniques for grain storage pests to improve grain insect detection in China. The primary volatile organic chemicals (VOCs) in these secretions are identified using headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography-mass spectrometry (GC-MS). The specific VOCs that are unique to T. castaneum are selected as criteria for determining the presence of T. castaneum in the granary. To obtain more specific VOCs, experiments were designed for the analysis of T. castaneum samples under different extraction times, two types of SPME fibers and two GC-MS devices of different manufacturers. The experimental results showed that 12 VOCs were detected at relatively high levels, seven of which were common and which were not detected in other grains and grain insects. The seven compounds are 1-pentadecene, 2-methyl-p-benzoquinone, 2-ethyl-p-benzoquinone, 1-hexadecene, cis-9-tetradecen-1-ol, m-cresol and paeonol. These seven compounds can be used as volatile markers to identify the presence of T. castaneum, which could serve as a research foundation for the creation of new techniques for T. castaneum monitoring.

Effect of moisture, protein, starch, soluble sugar contents and microstructure on mechanical properties of maize kernels.

The relationships between components contents and mechanical properties of maize kernels were studied. The relationships were analyzed by gray relation analysis (GRA), correlation analysis (CA), and multiple linear regression (MLR). Furthermore, Scanning Electron Microscope (SEM) was utilized for interpreting mechanical properties. The results of GRA and CA indicated that soluble sugar content was not an important factor that can affect mechanical properties compared with the moisture, starch and protein contents. The results of MLR indicated that the regression models can be used to access the hardness, rupture force and apparent elastic modulus (R greater than 0.75), but cannot be used to access rupture energy and viscoelastic parameters. The microstructure observation illustrated that high protein content could increase hardness, rupture force, rupture energy, and elastic properties, while high starch content could increase viscous properties. This study can provide technical references for transportation, processing and harvest processes.

Metformin Protects Cardiovascular Health in People With Diabetes.

Background: Metformin is the most commonly used drug for patients with diabetes, but there is still some controversy about whether it has a protective effect on cardiovascular health. We therefore used the National Health and Nutritional Examination Survey (NHANES) database to analyze the impact of metformin use on cardiovascular health in patients with diabetes. Methods: We extracted the demographic data and laboratory test results of all people with diabetes in the NHANES database from January 2017 to March 2020. The outcomes were seven indicators of cardiovascular health from the American Heart Association, each was scored as 0, 1, and 2 to represent poor, moderate, and ideal health statuses, respectively. The scores for the indicators (excluding diet and glycemic status) were summed, and the sum score was then considered to indicate unhealthy (0-5) or healthy (>5). Multivariate logistic regression analysis was used, and subgroup analyses were performed by age, alcohol consumption, education, and marital status. Results: This study included 1,356 patients with diabetes, among which 606 were taking metformin. After adjusting for all included variables, oral metformin in patients with diabetes had a protective effect on the cardiovascular health of patients (OR = 0.724, 95% CI = 0.573-0.913, P = 0.007). Subgroup analysis indicated that metformin protects the cardiovascular health of people with diabetes more clearly in those who are young (OR = 0.655, 95% CI = 0.481-0.892, P = 0.007), married (OR = 0.633, 95% CI = 0.463-0.863, P = 0.003), and drink alcohol (OR = 0.742, 95% CI = 0.581-0.946, P = 0.016). Conclusion: This study found that metformin has a protective effect on the cardiovascular health of patients with diabetes. The study findings support the general applicability of metformin.

Recent estimates and predictions of 5-year survival rate in patients with pancreatic cancer: A model-based period analysis.

Background: The 5-year survival rate for pancreatic cancer (PC) is incredibly low, resulting in this often being a fatal disease. Timely and accurate assessment of the survival rate and prognosis of patients with PC is of great significance for the development of new programs for prevention, monitoring, and treatment. Methods: Period analysis and further stratified analysis were used to determine the 5-year relative survival rate (RSR) of patients with PC from 2002 to 2016 using the Surveillance, Epidemiology, and End Results (SEER) project database of the National Cancer Institute. Based on this, a generalized linear model was created to predict the survival rate of patients from 2017 to 2021. Result: During 2002-2016, the 5-year RSR of patients with PC increased from 7.9 to 23.7%. The generalized linear model predicted that the survival rate had increased to 33.9% during 2017-2021, and hence, it was still unacceptably low. The survival rate of patients aged ≥75 years at diagnosis was the lowest among all age groups and was predicted to be only 21.4% during 2017-2021. Notably, the survival rate of patients with differentiation grade III at diagnosis remains particularly low at 7.6%. Conclusion: The survival rates of patients with PC, although slightly improved, remain extremely low. Timely assessment of the trend of survival rate changes in patients with PC further improves the prognosis of tumor patients and provides data support for relevant medical works to formulate effective tumor prevention and control policies.

Determination of hardness for maize kernels based on hyperspectral imaging.

In order to realize rapid and non-destructive detection of hardness for maize kernels, a method for quantitative hardness measurement was proposed based on hyperspectral imaging technology. Firstly, the regression model of hardness and moisture content was established. Then, based on reflectance hyperspectral imaging at wavelengths within 399.75-1005.80 nm, the prediction model of the moisture content was studied by the partial least squares regression (PLSR) based on the characteristic wavelengths, which was selected through successive projection algorithm (SPA). Finally, the hardness prediction model was validated by combing the prediction model of moisture content with the regression model of hardness. The coefficient of determination (R2), the root mean square error (RMSE) the ratio of performance-to-deviation (RPD) and the ratio of error range (RER) of hardness prediction were 0.912, 17.76 MPa, 3.41 and 14, respectively. Therefore, this study provided a method for rapid and non-destructive detection of hardness of maize kernels.

HANDY: a device for assessing resistance to mechanical crushing of maize kernel.

BACKGROUND: How to control the physical damage during maize kernel harvesting is a major problem for both mechanical designers and plant breeders. A limitation of addressing this problem is lacking a reliable method for assessing the relation between kernel damage susceptibility and threshing quality. The design, construction, and testing of a portable tool called "HANDY", which can assess the resistance to mechanical crushing in maize kernel. HANDY can impact the kernel with a special accelerator at a given rotating speed and then cause measurable damage to the kernel. These factors are varied to determine the ideal parameters for operating the HANDY. RESULTS: Breakage index (BI, target index of HANDY), decreased as the moisture content of kernel increased or the rotating speed decreased within the tested range. Furthermore, the HANDY exhibited a greater sensitivity in testing kernels at higher moisture level influence on the susceptibility of damage kernel than that in Breakage Susceptibility tests, particularly when the centrifugation speed is about 1800 r/min and the centrifugal disc type is curved. Considering that the mechanical properties of kernels vary greatly as the moisture content changes, a subsection linear (average goodness of fit is 0.9) to predict the threshing quality is built by piecewise function analysis, which is divided by kernel moisture. Specifically, threshing quality is regarded as a function of the measured result of the HANDY. Five maize cultivars are identified with higher damage resistance among 21 tested candidate varieties. CONCLUSIONS: The HANDY provides a quantitative assessment of the mechanical crushing resistance of maize kernel. The BI is demonstrated to be a more robust index than breakage susceptibility (BS) when evaluating threshing quality in harvesting in terms of both reliability and accuracy. This study also offers a new perspective for evaluating the mechanical crushing resistance of grains and provides technical support for breeding and screening maize varieties that are suitable for mechanical harvesting.

Effect of Nonwoven Carbon Tissue-Reinforced Epoxy Resin Adhesive Layer on the Single Lap Bonding Strength of Aluminum Alloy Joints.

The present paper provides a solution to enhance the reliability of bonding. The effect of the nonwoven carbon tissue (NWCT) composite adhesive layer on the bonding strength and reliability of aluminum alloy of single lap joints (SLJ) was investigated by embedding NWCT into the epoxy adhesive layer. The bonding strength, Weibull distribution, metallography of cross section, and fracture surface morphology of NWCT specimens were investigated. The results showed that the average bonding strength and Weibull characteristic strength (WCS) of NWCT-reinforced specimen were 16.78 and 17.17 MPa, which increased by 70.2 and 66.7%, respectively, compared with the neat specimen, and the Weibull modulus increased from 11.46 to 22.83, which indicated that NWCT specimens had higher bonding reliability. The mechanism of microcrack formation was obtained by analyzing the cross section of specimen loaded 95% WCS without macroscopic damage. The metallographic section showed that the microcrack of the neat specimen originated from the adhesive-aluminum interface, while the microcracks of the NWCT specimen originated from the interface between short carbon fibers (SCF) and adhesive. Typical failure modes were gained from visual observation and SEM. The failure mode of the neat specimen included more Al-adhesive interface failure, while the NWCT specimen included more internal failure of adhesive-SCFs with the fracture, pullout, peeling, and slippage of SCFs improving the toughness and bonding strength of the adhesive layer. The bridging effect of SCFs in the adhesive layer reinforced by NWCT can even the load and release the stress to improve the bonding reliability.

Effect of Different Pressures on Microstructure and Mechanical Performance of F-III Fibers in Supercritical Carbon Dioxide Fluid.

F-III fibers were treated at different pressures in supercritical carbon dioxide fluid and all samples including untreated and treated F-III fibers were characterized by a mechanical performance tester, wide-angle X-ray scattering and small-angle X-ray scattering. By studying the relationship between mechanical performance and microstructural changes of the samples, it was found that microstructural change was the main cause of variation in mechanical performance. Results revealed that the maximum tensile strength and modulus of F-III fibers were acquired at 14 MPa within the pressure range of 8 MPa to 16 MPa when the temperature, tension and time were 250 °C, 6 g·d-1 and 40 min, respectively. Correspondingly, the microstructures of the samples, including the phase fraction, crystal size, orientation factor, fibril radius, fibril length and misorientation angle, have been investigated. It was fortunate that the supercritical carbon dioxide fluid could be used as a medium during the hot-stretch process to improve the mechanical performance of F-III fibers, although the treatment temperature was lower than the glass transition temperature of the F-III fibers.

Surface modification of an aramid fiber via grafting epichlorohydrin assisted by supercritical CO2.

In order to improve the interface combination property between an aramid fiber (AF) and an epoxy resin matrix, the surface modification of AF with epichlorohydrin (ECH) assisted by supercritical CO2 (ScCO2) was investigated. The fiber surface was characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and dynamic contact angle (DCA) analysis. At the same time, we utilized interfacial shear strength (IFSS) and interlaminar shear strength (ILSS) to characterize the bond strength between the fiber and epoxy resin. An ideal modification effect of the fiber surface was acquired when the fiber treated with ECH in ScCO2 compared with the fiber treated in pure ScCO2. The results showed that ECH could be successfully grafted onto the fiber surface under an anhydrous aluminum chloride (AlCl3) catalyst in ScCO2, and the relative content of oxygen on the fiber surface increased after modification; simultaneously, the morphology of the fiber surface became rougher and the fiber's wettability was upgraded. Finally, the IFSS property of the fiber with the epoxy resin increased, and the ILSS property of the AF-reinforced resin composites was also improved compared with those of the untreated materials.

Effect of graphene oxide coatings on the structure of polyacrylonitrile fibers during pre-oxidation process.

In this paper, graphene oxide (GO) was successfully prepared by the modified Hummers' method and then uniformly dispersed in an aqueous solution containing a small amount of polyvinyl alcohol (PVA) as an adhesive. The solution was uniformly coated on the surface of polyacrylonitrile (PAN) fibers and then the fibers were pre-oxidized at 240 °C for 20 min in the air. The pre-oxidation degree of PAN fibers and fibers coated with different contents of GO was analyzed by the Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). In addition, the surface and cross-section of PAN fibers before and after pre-oxidation were observed by scanning electron microscopy (SEM). The experimental results showed that the presence of GO coatings significantly improved the pre-oxidation degree of PAN fibers, at the same time, the pre-oxidation degree of PAN fibers increased with the increase of GO contents from 0.2 to 1.0 mg ml-1. The cross-section morphology of the pre-oxidized PAN fibers revealed that the degree of pre-oxidation inside fibers was uniform. This was because the GO coatings acted as a medium to transfer heat, removing the heat released during the pre-oxidation process and increasing the pre-oxidation degree.

Study on Crystallization Behaviors and Properties of F-III Fibers during Hot Drawing in Supercritical Carbon Dioxide.

In order to obtain F-III fibers with high mechanical properties, pristine F-III fibers were hot drawn at the temperature of 250 °C, pressure of 14 MPa, tension of 6 g·d-1, and different times, which were 15 min, 30 min, 45 min, 60 min, 75 min, 90 min, and 105 min, respectively, in supercritical carbon dioxide (Sc-CO2) in this article. All the samples, including the pristine and treated F-III fibers, were characterized by a mechanical performance tester, wide-angle X-ray scattering (WAXS), small-angle X-ray scattering (SAXS), and thermogravimetric analysis (TGA). The results showed that the thermal stability of F-III fibers was enhanced to some extent, and the tensile strength and modulus of F-III fibers had great changes as the extension of treatment time during hot drawing in Sc-CO2, although the treatment temperature was lower than the glass transition temperature (Tg) of F-III fibers. Accordingly, the phase fraction, orientation factor fc of the (110) crystal plane, fibril length lf, and misorientation angle Bφ of all the samples were also investigated. Fortunately, the hot drawing in Sc-CO2 was successfully applied to the preparation of F-III fibers with high mechanical properties.