Negative mixing enthalpy solid solutions deliver high strength and ductility.

Body-centred cubic refractory multi-principal element alloys (MPEAs), with several refractory metal elements as constituents and featuring a yield strength greater than one gigapascal, are promising materials to meet the demands of aggressive structural applications1-6. Their low-to-no tensile ductility at room temperature, however, limits their processability and scaled-up application7-10. Here we present a HfNbTiVAl10 alloy that shows remarkable tensile ductility (roughly 20%) and ultrahigh yield strength (roughly 1,390 megapascals). Notably, these are among the best synergies compared with other related alloys. Such superb synergies derive from the addition of aluminium to the HfNbTiV alloy, resulting in a negative mixing enthalpy solid solution, which promotes strength and favours the formation of hierarchical chemical fluctuations (HCFs). The HCFs span many length scales, ranging from submicrometre to atomic scale, and create a high density of diffusive boundaries that act as effective barriers for dislocation motion. Consequently, versatile dislocation configurations are sequentially stimulated, enabling the alloy to accommodate plastic deformation while fostering substantial interactions that give rise to two unusual strain-hardening rate upturns. Thus, plastic instability is significantly delayed, which expands the plastic regime as ultralarge tensile ductility. This study provides valuable insights into achieving a synergistic combination of ultrahigh strength and large tensile ductility in MPEAs.

Superelastic oxide micropillars enabled by surface tension-modulated 90° domain switching with excellent fatigue resistance.

Superelastic materials capable of recovering large nonlinear strains are ideal for a variety of applications in morphing structures, reconfigurable systems, and robots. However, making oxide materials superelastic has been a long-standing challenge due to their intrinsic brittleness. Here, we fabricate ferroelectric BaTiO3 (BTO) micropillars that not only are superelastic but also possess excellent fatigue resistance, lasting over 1 million cycles without accumulating residual strains or noticeable variation in stress-strain curves. Phase field simulations reveal that the large recoverable strains of BTO micropillars arise from surface tension-modulated 90° domain switching and thus are size dependent, while the small energy barrier and ultralow energy dissipation are responsible for their unprecedented cyclic stability among superelastic materials. This work demonstrates a general strategy to realize superelastic and fatigue-resistant domain switching in ferroelectric oxides for many potential applications.

An Anisotropic Hydrogel Based on Mussel-Inspired Conductive Ferrofluid Composed of Electromagnetic Nanohybrids.

Anisotropic hydrogels with a hierarchical structure can mimic biological tissues, such as neurons or muscles that show directional functions, which are important factors for signal transduction and cell guidance. Here, we report a mussel-inspired approach to fabricate an anisotropic hydrogel based on a conductive ferrofluid. First, polydopamine (PDA) was used to mediate the formation of PDA-chelated carbon nanotube-Fe3O4 (PFeCNT) nanohybrids and also used as a dispersion medium to stabilize the nanohybrids to form a conductive ferrofluid. The ferrofluid can respond to an orientated magnetic field and be programed to form aligned structures, which were then frozen in a hydrogel network formed via in situ free-radical polymerization and gelation. The resulted hydrogel shows directional conductive and mechanical properties, mimicking an oriented biological tissue. Under external electrical stimulation, the orientated PFeCNT nanohybrids can be sensed by the myoblasts cultured on the hydrogel, resulting in the oriented growth of cells. In summary, the mussel-inspired anisotropic hydrogel with its aligned structural complexity and anisotropic properties together with the cell affinity and tissue adhesiveness is a potent multifunctional biomaterial for mimicking oriented tissues to guide cell proliferation and tissue regeneration.

In†Situ Construction of an Ultra-Stable Conductive Composite Interface for High-Voltage All-Solid-State Lithium Metal Batteries.

The garnet electrolyte presents poor wettability with Li metal, resulting in an extremely large interfacial impedance and drastic growth of Li dendrites. Herein, a novel ultra-stable conductive composite interface (CCI) consisting of Liy Sn alloy and Li3 N is constructed in situ between Li6.4 La3 Zr1.4 Ta0.6 O12 (LLZTO) pellet and Li metal by a conversion reaction of SnNx with Li metal at 300 °C. The Liy Sn alloy as a continuous and robust bridge between LLZTO and Li metal can effectively reduce the LLZTO/Li interfacial resistance from 4468.0â€…Ω to 164.8 Ω. Meanwhile, the Li3 N as a fast Li-ion channel can efficiently transfer Li ions and give their uniform distribution at the LLZTO/Li interface. Therefore, the Li/LLZTO@CCI/Li symmetric battery stably cycles for 1200 h without short circuit, and the all-solid-state high-voltage Li/LLZTO@CCI/LiNi0.5 Co0.2 Mn0.3 O2 battery achieves a specific capacity of 161.4 mAh g-1 at 0.25 C with a capacity retention rate of 92.6 % and coulombic efficiency of 100.0 % after 200 cycles at 25 °C.

A Mussel-Inspired Persistent ROS-Scavenging, Electroactive, and Osteoinductive Scaffold Based on Electrochemical-Driven In Situ Nanoassembly.

Conductive polymers are promising for bone regeneration because they can regulate cell behavior through electrical stimulation; moreover, they are antioxidative agents that can be used to protect cells and tissues from damage originating from reactive oxygen species (ROS). However, conductive polymers lack affinity to cells and osteoinductivity, which limits their application in tissue engineering. Herein, an electroactive, cell affinitive, persistent ROS-scavenging, and osteoinductive porous Ti scaffold is prepared by the on-surface in situ assembly of a polypyrrole-polydopamine-hydroxyapatite (PPy-PDA-HA) film through a layer-by-layer pulse electrodeposition (LBL-PED) method. During LBL-PED, the PPy-PDA nanoparticles (NPs) and HA NPs are in situ synthesized and uniformly coated on a porous scaffold from inside to outside. PDA is entangled with and doped into PPy to enhance the ROS scavenging rate of the scaffold and realize repeatable, efficient ROS scavenging over a long period of time. HA and electrical stimulation synergistically promote osteogenic cell differentiation on PPy-PDA-HA films. Ultimately, the PPy-PDA-HA porous scaffold provides excellent bone regeneration through the synergistic effects of electroactivity, cell affinity, and antioxidative activity of the PPy-PDA NPs and the osteoinductivity of HA NPs. This study provides a new strategy for functionalizing porous scaffolds that show great promise as implants for tissue regeneration.

Scaffold-based non-viral CRISPR delivery platform for efficient and prolonged gene activation to accelerate tissue regeneration.

Clustered regularly interspaced short palindromic repeat activation (CRISPRa) technology has emerged as a precise genome editing tool for activating endogenous transgene expression. While it holds promise for precise cell modification, its translation into tissue engineering has been hampered by biosafety concerns and suboptimal delivery methods. To address these challenges, we have developed a CRISPRa non-viral gene delivery platform by immobilizing non-viral CRISPRa complexes into a biocompatible hydrogel/nanofiber (Gel/NF) composite scaffold. The Gel/NF scaffold facilitates the controlled and sustained release of CRISPRa complexes and also promotes cell recruitment to the scaffold for efficient and localized transfection. As a proof of concept, we employed this CRISPRa delivery platform to activate the vascular endothelial growth factor (VEGF) gene in a rat model with full-thickness skin defects. Our results demonstrate sustained upregulation of VEGF expression even at 21 days post-implantation, resulting in enhanced angiogenesis and improved skin regeneration. These findings underscore the potential of the Gel/NF scaffold-based CRISPRa delivery platform as an efficient and durable strategy for gene activation, offering promising prospects for tissue regeneration. STATEMENT OF SIGNIFICANCE: Translation of clustered regularly interspaced short palindromic repeat activation (CRISPRa) therapy to tissue engineering is limited by biosafety concerns and unsatisfactory delivery strategy. To solve this issue, we have developed a CRISPRa non-viral gene delivery platform by immobilizing non-viral CRISPRa complexes into a biocompatible hydrogel/nanofiber (Gel/NF) composite scaffold. This scaffold enables controlled and sustained release of CRISPRa and can induce cell recruitment for localized transfection. As a proof of concept, we activated vascular endothelial growth factor (VEGF) in a rat model with full-thickness skin defects, leading to sustained upregulation of VEGF expression, enhanced angiogenesis and improved skin regeneration in vivo. These findings demonstrate the potential of this platform for gene activation, thereby offering promising prospects for tissue regeneration.

Simultaneous enhancement of strength and ductility via microband formation and nanotwinning in an L12-strengthened alloy.

Metallic alloys with high strength and large ductility are required for extreme structural applications. However, the achievement of ultrahigh strength often results in a substantially decreased ductility. Here, we report a strategy to achieve the strength-ductility synergy by tailoring the alloy composition to control the local stacking fault energy (SFE) of the face-centered-cubic (fcc) matrix in an L12-strengthened superlattice alloy. As a proof of concept, based on the thermodynamic calculations, we developed a non-equiatomic CoCrNi2(Al0.2Nb0.2) alloy using phase separation to create a near-equiatomic low SFE disordered CoCrNi medium-entropy alloy matrix with in situ formed high-content coherent Ni3(Al, Nb)-type ordered nanoprecipitates (∼ 12 nm). The alloy achieves a high tensile strength up to 1.6 GPa and a uniform ductility of 33%. The low SFE of the fcc matrix promotes the formation of nanotwins and parallel microbands during plastic deformation which could remarkably enhance the strain hardening capacity. This work provides a strategy for developing ultrahigh-strength alloys with large uniform ductility.

Fully Biodegradable Packaging Films for Fresh Food Storage Based on Oil-Infused Bacterial Cellulose.

Fully biodegradable packaging materials are demanded to resolve the issue of plastic pollution. However, the fresh food storage performance of biodegradable materials is generally much lower than that of plastics due to their high permeability, microbial friendliness, and limited stretchability and transparency. Here a biodegradable packaging material is reported with high fresh food storage performance based on an oil-infused bacterial cellulose (OBC) porous film. The oil infusion significantly improved cellulose's food-keeping performance by reducing its gas permeability, increasing its stretchability and transparency, and enabling the active release of green vapor-phase preservative molecules, while maintaining its intrinsically high degradability. Strawberries stored in a container with the OBC lid at 23 °C after 5 days exhibited a moldy rate of 0%, in contrast to the 100% moldy rate of those stored by poly(ethylene). Enhanced storage performance is also obtained on tomatoes, pork, and shrimp. The OBC film is naturally degraded after being buried in wet soil at 30 °C for 9 days, identical to the degradation rate of bacterial cellulose. The liquid seal strategy broadly applies to different celluloses, providing a general option for developing cellulose-based biodegradable packaging materials.

Negative enthalpy alloys and local chemical ordering: a concept and route leading to synergy of strength and ductility.

Solid solutions are ubiquitous in metals and alloys. Local chemical ordering (LCO) is a fundamental sub-nano/nanoscale process that occurs in many solid solutions and can be used as a microstructure to optimize strength and ductility. However, the formation of LCO has not been fully elucidated, let alone how to provide efficient routes for designing LCO to achieve synergistic effects on both superb strength and ductility. Herein, we propose the formation and control of LCO in negative enthalpy alloys. With engineering negative enthalpy in solid solutions, genetic LCO components are formed in negative enthalpy refractory high-entropy alloys (RHEAs). In contrast to conventional 'trial-and-error' approaches, the control of LCO by using engineering negative enthalpy in RHEAs is instructive and results in superior strength (1160 MPa) and uniform ductility (24.5%) under tension at ambient temperature, which are among the best reported so far. LCO can promote dislocation cross-slip, enhancing the interaction between dislocations and their accumulation at large tensile strains; sustainable strain hardening can thereby be attained to ensure high ductility of the alloy. This work paves the way for new research fields on negative enthalpy solid solutions and alloys for the synergy of strength and ductility as well as new functions.

Chitosan/bovine serum albumin co-micropatterns on functionalized titanium surfaces and their effects on osteoblasts.

Chitosan (CS)/bovine serum albumin (BSA) micropatterns were prepared on functionalized Ti surfaces by micro-transfer molding (µ-TM). µ-TM realized the spatially controlled immobilization of cells and offered a new way of studying the interaction between micropatterns and cells. Two kinds of micropatterns were produced: (1) microgrooves representing a discontinuously grooved co-micropattern, with the rectangular CS region separated by BSA walls; (2) microcylinders representing a continuously interconnected co-micropattern, with the net-like CS region separated by BSA cylinders. A comparison of cell behaviors on the two types of micropatterns indicated that the shape rather than the size had a dominant effect on cell proliferation. The micropattern size in the same range of cell diameters favored cell proliferation. However, cell differentiation was more sensitive to the size rather than to the shape of the micropatterns. In conclusion, cell behavior can be regulated by micropatterns integrating different materials.

Fabrication of Porous Tantalum with Low Elastic Modulus and Tunable Pore Size for Bone Repair.

Porous tantalum (Ta) is a potential bone substitute due to its excellent biocompatibility and desirable mechanical properties. In this work, a series of porous Ta materials with interconnected micropores and varying pore sizes from 23 to 210 µm were fabricated using spark plasma sintering. The porous structure was formed by thermal decomposition of ammonium bicarbonate powder premixed in the Ta powder. The pore size and porosity were controlled by the categorized particle size of ammonium bicarbonate. The porous Ta has elastic moduli in the range of 2.1-3.2 GPa and compressive yield strength in the range of 23-34 MPa, which are close to those of human bone. In vitro, as-fabricated porous Ta demonstrates excellent biocompatibility by supporting adhesion and proliferation of preosteoblasts. In vivo studies also validate its bone repair capability after implantation in a rat femur defect model. The study demonstrates a facile strategy to fabricate porous Ta with controllable pore size for bone repair.

Corrigendum to "Mussel-inspired nanozyme catalyzed conductive and self-setting hydrogel for adhesive and antibacterial bioelectronics" [Bioact. Mater. 6 (2021) 2676-2687 / 452].

[This corrects the article DOI: 10.1016/j.bioactmat.2021.01.033.].

Bioadhesive and electroactive hydrogels for flexible bioelectronics and supercapacitors enabled by a redox-active core-shell PEDOT@PZIF-71 system.

Stretchable and conductive hydrogels are rapidly emerging as new generation candidates for wearable devices. However, the poor electroactivity and bioadhesiveness of traditional conductive hydrogels has limited their applications. Herein, a mussel-inspired strategy is proposed to prepare a specific core-shell redox-active system, consisting of a polydopamine (PDA) modified zeolitic imidazolate framework 71 (ZIF-71) core, and a poly 3,4-ethylenedioxythiopene (PEDOT) shell. Owing to the abundant catechol groups, PEDOT can be assembled on the surface of ZIF-71 to create a redox-active system. The core-shell nanoparticles could act as a redox-active nanofiller to develop a conductive polyacrylamide (PAM) hydrogel with energy-storage properties. The core-shell PEDOT@PZIF-71 system provides a mussel-inspired environment in the hydrogel matrix and endows the hydrogel with stretchability and adhesiveness. The hydrogel can be applied as a functional electrode for both bioelectronics and supercapacitors. Moreover, this hydrogel exhibits favorable biocompatibility and can be implanted in vivo for biosignal measurement without causing inflammation. This redox-active core-shell PEDOT@PZIF-71 system provides a promising strategy for the design of hydrogel-based wearable electronic devices.

Study of protein adsorption on octacalcium phosphate surfaces by molecular dynamics simulations.

This study numerically studies absorption of human serum albumin (HSA) and basic protein lysozyme (LSZ) on crystallographic planes of octacalcium phosphate (OCP), an essential bioactive calcium phosphate. The molecular simulations include constructing atomic structure of OCP crystallographic planes and representative segments of HSA and LSZ with three different initiate orientations respect to OCP planes. The simulation reveals the dynamic process of the protein absorption. The absorption behavior of proteins is quantified by the interaction energy between proteins and OCP planes and the strain energy of proteins in absorption. The results show that absorption interaction energy of basic LSZ is higher than that of acidic HSA, which indicates that LSZ is more favorable to adsorb onto OCP surface than HSA. The interaction energies change with the OCP crystallographic planes, the trend of changes for both proteins are similar, that is OCP (001) > OCP (111) > OCP (110) > OCP (100), which is corrected with surface energy variation of crystallographic planes. The strain energy strongly depends on the orientations of the proteins before absorption, but weakly depends on crystallographic planes. The simulation results provide useful significant information for predicting/designing interface between bioceramic materials and organic tissues as well as for understanding the mechanism of the osteoinductivity at an atomic level.

Controlled pVEGF delivery via a gene-activated matrix comprised of a peptide-modified non-viral vector and a nanofibrous scaffold for skin wound healing.

Regulating cell function and tissue formation by combining gene delivery with functional scaffolds to create gene-activated matrices (GAMs) is a promising strategy for tissue engineering. However, fabrication of GAMs with low cytotoxicity, high transfection efficiency, and long-term gene delivery properties remains a challenge. In this study, a non-viral DNA delivery nanocomplex was developed by modifying poly (D, L-lactic-co-glycolic acid)/polyethylenimine (PLGA/PEI) nanoparticles with the cell-penetrating peptide KALA. Subsequently, the nanocomplex carrying plasmid DNA encoding vascular endothelial growth factor (pVEGF) was immobilized onto a polydopamine-coated electrospun alginate nanofibrous scaffold, resulting in a GAM for enhanced skin wound healing. The nanocomplex exhibited much lower cytotoxicity and comparable or even higher transfection efficiency compared with PEI. The GAM enabled sustained gene release and long-tern transgene expression of VEGF in vitro. In an excisional full-thickness skin wound rat model, the GAM could accelerate wound closure, promote complete re-epithelization, reduce inflammatory response, and enhance neovascularization, ultimately enhancing skin wound healing. The current GAM comprising a low-toxic gene delivery nanocomplex and a biocompatible 3D nanofibrous scaffold demonstrates great potential for mediating long-term cell functions and may become a powerful tool for gene delivery in tissue engineering. STATEMENT OF SIGNIFICANCE: Gene delivery is a promising strategy in promoting tissue regeneration as an effective alternative to growth factor delivery, but the study on three-dimensional gene-activated scaffolds remains in its infancy. Herein, a biodegradable nanofibrous gene-activated matrix integrating non-viral nanoparticle vector was designed and evaluated both in vitro and in vivo. The results show that the nanoparticle vector provided high transfection efficiency with minimal cytotoxicity. After surface immobilization of the nanocomplexes carrying plasmid DNA encoding vascular endothelial growth factor (pVEGF), the nanofibrous scaffold enabled sustained DNA release and long-term transgene expression in vitro. In a rat full-thickness skin wound model, the scaffold could accelerate wound healing. This innovative gene-activated matrix can be a promising candidate for tissue regeneration.

Spatiotemporal Delivery of pBMP2 and pVEGF by a Core-Sheath Structured Fiber-Hydrogel Gene-Activated Matrix Loaded with Peptide-Modified Nanoparticles for Critical-Sized Bone Defect Repair.

The clinical translation of bioactive scaffolds for the treatment of large segmental bone defects remains a grand challenge. The gene-activated matrix (GAM) combining gene therapy and tissue engineering scaffold offers a promising strategy for the restoration of structure and function of damaged or dysfunctional tissues. Herein, a gene-activated biomimetic composite scaffold consisting of an electrospun poly(ε-caprolactone) fiber sheath and an alginate hydrogel core which carried plasmid DNA encoding bone morphogenetic protein 2 (pBMP2) and vascular endothelial growth factor (pVEGF), respectively, is developed. A peptide-modified polymeric nanocarrier with low cytotoxicity and high efficiency serves as the nonviral DNA delivery vector. The obtained GAM allows spatiotemporal release of pVEGF and pBMP2 and promotes osteogenic differentiation of preosteoblasts in vitro. In vivo evaluation using a critical-sized segmental femoral defect model in rats shows that the dual gene delivery system can significantly accelerate bone healing by activating angiogenesis and osteogenesis. These findings demonstrate the effectiveness of the developed dual gene-activated core-sheath structured fiber-hydrogel composite scaffold for critical-sized bone defect regeneration and the potential of cell-free scaffold-based gene therapy for tissue engineering.

High-Strength, Biomimetic Functional Chitosan-Based Hydrogels for Full-Thickness Osteochondral Defect Repair.

Fabrication of a hydrogel scaffold for full-thickness osteochondral defect repair remains a grand challenge. Developing layered and multiphasic hydrogels to mimic the intrinsic hierarchical structure of the osteochondral unit is a promising strategy. Chitosan-based hydrogels are widely applied for biomedical applications. However, insufficient mechanical strength and lack of biological cues to restore damaged cartilage and subchondral tissue significantly hinder their application in osteochondral tissue engineering. In this study, a strong and tough, osteochondral-mimicking functional chitosan-based hydrogel (bilayer-gel) with an in situ mineralized, osteoconductive lower layer and a basic fibroblast growth factor (bFGF)-incorporated, chondrogenic inducing upper layer was developed. The obtained bilayer-gel showed a depth-dependent gradient pore structure and composition. The strong double crosslinked hydrogel network and the homogeneous deposition of hydroxyapatite nanoparticles (HAp) at the lower layer provided a compressive strength of up to 2.5 MPa and a compressive strain of up to 40%. In vitro study showed that the bilayer-gel facilitates both chondrogenic differentiation in the upper layer and osteogenic differentiation in the lower layer. In vivo implantation revealed that the bilayer-gel could simultaneously promote hyaline cartilage and subchondral bone formation, thus resulting in an improved osteochondral reconstruction outcome. The present bilayer-gel thus shows great potential for full-thickness osteochondral defect repair.

Bioadhesive injectable hydrogel with phenolic carbon quantum dot supported Pd single atom nanozymes as a localized immunomodulation niche for cancer catalytic immunotherapy.

Immunotherapy is a powerful way to treat cancer, however, systemic treatment-associated adverse effects remain a major concern. In this study, a bioadhesive injectable hydrogel is developed to provide localized immune niches for tumor microenvironment immunomodulation and cancer catalytic immunotherapy. First, a phenolic single atom nanozyme (SAN) was developed by in situ synthesis of Pd single atom on catechol-grafted carbon-quantum-dot (DA-CQD@Pd) templates. Then, the bioadhesive injectable hydrogel consisting of DA-CQD@Pd SAN and immune adjuvant CpGODN was formed through SAN-catalyzed free-radical polymerization. The SAN exhibited peroxidase-like activity to generate ROS and kill tumor cells through catalytic therapy. The hydrogel locally released CpGODN in a sustained manner, which limited the risk of systemic exposure, reducing the impact of CpGODN toxicity, and protecting CpGODN from degradation. The bioadhesive hydrogel immobilized around solid tumor to provide an immune response site after injection. When combined it with the administration of immune checkpoint inhibitor anti-PD-L1, the hydrogel realized localized immunomodulation, maximized therapeutic efficacy and prevents tumor metastasis via a catalytic immunotherapy.

Mouse Strain- and Charge-Dependent Vessel Permeability of Nanoparticles at the Lower Size Limit.

Remarkable advancement has been made in the application of nanoparticles (NPs) for cancer therapy. Although NPs have been favorably delivered into tumors by taking advantage of the enhanced permeation and retention (EPR) effect, several physiological barriers present within tumors tend to restrict the diffusion of NPs. To overcome this, one of the strategies is to design NPs that can reach lower size limits to improve tumor penetration without being rapidly cleared out by the body. Several attempts have been made to achieve this, such as selecting appropriate nanocarriers and modifying surface properties. While many studies focus on the optimal design of NPs, the influence of mouse strains on the effectiveness of NPs remains unknown. Therefore, this study aimed to assess whether the vascular permeability of NPs near the lower size limit differs among mouse strains. We found that the vessel permeability of dextran NPs was size-dependent and dextran NPs with a size below 15 nm exhibited leakage from postcapillary venules in all strains. Most importantly, the leakage rate of 8-nm fluorescein isothiocyanate dextran was significantly higher in the BALB/c mouse strain than in other strains. This strain dependence was not observed in slightly positive TRITC-dextran with comparable sizes. Our results indicate that the influence on mouse strains needs to be taken into account for the evaluation of NPs near the lower size limit.

Lithium-ion spontaneous exchange and synergistic transport in ceramic-liquid hybrid electrolytes for highly efficient lithium-ion transfer.

Ceramic electrolytes are important in ceramic-liquid hybrid electrolytes (CLHEs), which can effectively solve the interfacial issues between the electrolyte and electrodes in solid-state batteries and provide a highly efficient Li-ion transfer for solid-liquid Li metal batteries. Understanding the ionic transport mechanisms in CLHEs and the corresponding role of ceramic electrolytes is crucial for a rational design strategy. Herein, the Li-ion transfer in the ceramic electrolytes of CLHEs was confirmed by tracking the 6Li and 7Li substitution behavior through solid-state nuclear magnetic resonance spectroscopy. The ceramic and liquid electrolytes simultaneously participate in Li-ion transport to achieve highly efficient Li-ion transfer in CLHEs. A spontaneous Li-ion exchange was also observed between ceramic and liquid electrolytes, which serves as a bridge that connects the ceramic and liquid electrolytes, thereby greatly strengthening the continuity of Li-ion pathways in CLHEs and improving the kinetics of Li-ion transfer. The importance of an abundant solid-liquid interface for CLHEs was further verified by the enhanced electrochemical performance in LiFePO4/Li and LiNi0.8Co0.1Mn0.1O2/Li batteries from the generated interface. This work provides a clear understanding of the Li-ion transport pathway in CLHEs that serves as a basis to build a universal Li-ion transport model of CLHEs.