Mechanism for plasmon-generated solvated electrons.

Solvated electrons are powerful reducing agents capable of driving some of the most energetically expensive reduction reactions. Their generation under mild and sustainable conditions remains challenging though. Using near-ultraviolet irradiation under low-intensity one-photon conditions coupled with electrochemical and optical detection, we show that the yield of solvated electrons in water is increased more than 10 times for nanoparticle-decorated electrodes compared to smooth silver electrodes. Based on the simulations of electric fields and hot carrier distributions, we determine that hot electrons generated by plasmons are injected into water to form solvated electrons. Both yield enhancement and hot carrier production spectrally follow the plasmonic near-field. The ability to enhance solvated electron yields in a controlled manner by tailoring nanoparticle plasmons opens up a promising strategy for exploiting solvated electrons in chemical reactions.

Nonadditive functional interactions between ligand-binding sites of the multidrug efflux pump AdeB from Acinetobacter baumannii.

Multidrug efflux is one of the major mechanisms of antibiotic resistance identified in clinical isolates of the human pathogen Acinetobacter baumannii. The multiple antibiotic resistance in this species is often enabled by the overproduction of the tripartite efflux pump AdeABC. In this pump, AdeB is the inner membrane transporter from the resistance-nodulation-division (RND) superfamily of proteins, which is responsible for the recognition and efflux of multiple structurally unrelated compounds. Like other RND transporters, AdeB is a trimeric protein with ligand-binding sites located in the large periplasmic domains. Previous structural studies, however, highlighted the uniqueness of AdeB interactions with ligands. Up to three ligand molecules were bound to one protomer of AdeB, mapping its substrate translocation path. In this study, we introduced single and double substitutions in the identified ligand-binding sites of AdeB. Our results show that the mechanism of substrate translocation by AdeB is different from that of other characterized RND transporters and that the functional interactions between the sites are nonadditive. We identified AdeB mutants with both the loss and the gain of antibiotic susceptibility phenotypes, as well as AdeB mutations making A. baumannii cells overproducing such pump variants even more susceptible to multiple antibiotics than efflux-deficient cells. IMPORTANCE Multidrug efflux pumps of the resistance-nodulation-division superfamily of proteins are important contributors to various aspects of bacterial physiology and antibiotic resistance. Studies of the best-characterized model transporter AcrB from Escherichia coli suggested that these transporters operate by a functional rotation mechanism in which various substrates bind to at least two different binding sites. This study suggests that the mechanism of AdeB is distinct and that the binding sites in this transporter are functionally linked.

Methylation of Si(111) Modulates Molecular Orientation in Perylenediimide Thin Films.

Singlet fission produces a pair of low-energy spin-triplet excitons from a single high-energy spin-singlet exciton. While this process offers the potential to enhance the efficiency of silicon solar cells by ∼30%, meeting this goal requires overlayer materials that can efficiently transport triplet excitons to an underlying silicon substrate. Herein, we demonstrate that the chemical functionalization of silicon surfaces controls the structure of vapor-deposited thin films of perylenediimide (PDI) dyes, which are prototypical singlet fission materials. Using a combination of atomic force microscopy (AFM) and grazing-incidence wide-angle X-ray scattering (GIWAXS), we find terminating Si(111) with either a thin, polar oxide layer (SiOx) or with hydrophobic methyl groups (Si-CH3) alters the structures of the resulting PDI films. While PDI films grown on SiOx are comprised of small crystalline grains that largely adopt an "edge-on" orientation with respect to the silicon surface, films grown on Si-CH3 contain large grains that prefer to align in a "face-on" manner with respect to the substrate. This "face-on" orientation is expected to enhance exciton transport to silicon. Interestingly, we find that the preferred mode of growth for different PDIs correlates with the space group associated with bulk crystals of these compounds. While PDIs that inhabit a monoclinic (P21/c) space group nucleate films by forming tall and sparse crystalline columns, PDIs that inhabit triclinic (P1̅) space groups afford films comprised of uniform, lamellar PDI domains. The results highlight that silicon surface functionalization profoundly impacts PDI thin film growth, and rational selection of a hydrophobic surface that promotes "face-on" adsorption may improve energy transfer to silicon.

Controlling Symmetry Breaking Charge Transfer in BODIPY Pairs.

Symmetry breaking charge transfer (SBCT) is a process in which a pair of identical chromophores absorb a photon and use its energy to transfer an electron from one chromophore to the other, breaking the symmetry of the chromophore pair. This excited state phenomenon is observed in photosynthetic organisms where it enables efficient formation of separated charges that ultimately catalyze biosynthesis. SBCT has also been proposed as a means for developing photovoltaics and photocatalytic systems that operate with minimal energy loss. It is known that SBCT in both biological and artificial systems is in part made possible by the local environment in which it occurs, which can move to stabilize the asymmetric SBCT state. However, how environmental degrees of freedom act in concert with steric and structural constraints placed on a chromophore pair to dictate its ability to generate long-lived charge pairs via SBCT remain open topics of investigation.In this Account, we compare a broad series of dipyrrin dimers that are linked by distinct bridging groups to discern how the spatial separation and mutual orientation of linked chromophores and the structural flexibility of their linker each impact SBCT efficiency. Across this material set, we observe a general trend that SBCT is accelerated as the spatial separation between dimer chromophores decreases, consistent with the expectation that the electronic coupling between these units varies exponentially with their separation. However, one key observation is that the rate of charge recombination following SBCT was found to slow with decreasing interchromophore separation, rather than speed up. This stems from an enhancement of the dimer's structural rigidity due to increasing steric repulsion as the length of their linker shrinks. This rigidity further inhibits charge recombination in systems where symmetry has already enforced zero HOMO-LUMO overlap. Additionally, for the forward transfer, the active torsion is shown to increase LUMO-LUMO coupling, allowing for faster SBCT within bridging groups.By understanding trends for how rates of SBCT and charge recombination depend on a dimer's internal structure and its environment, we identify design guidelines for creating artificial systems for driving sustained light-induced charge separation. Such systems can find application in solar energy technologies and photocatalytic applications and can serve as a model for light-induced charge separation in biological systems.

Do The Twist: Efficient Heavy-Atom-Free Visible Light Polymerization Facilitated by Spin-Orbit Charge Transfer Inter-system Crossing.

The use of visible light to drive polymerizations with spatiotemporal control offers a mild alternative to contemporary UV-light-based production of soft materials. In this spectral region, photoredox catalysis represents the most efficient polymerization method, yet it relies on the use of heavy-atoms, such as precious metals or toxic halogens. Herein, spin-orbit charge transfer intersystem crossing from boron dipyrromethene (BODIPY) dyads bearing twisted aromatic groups is shown to enable efficient visible light polymerizations in the absence of heavy-atoms. A ≈5-15× increase in polymerization rate and improved photostability was achieved for twisted BODIPYs relative to controls. Furthermore, monomer polarity had a distinct effect on polymerization rate, which was attributed to charge transfer stabilization based on ultrafast transient absorption and phosphorescence spectroscopies. Finally, rapid and high-resolution 3D printing with a green LED was demonstrated using the present photosystem.

Aggregation of Charge Acceptors on Nanocrystal Surfaces Alters Rates of Photoinduced Electron Transfer.

Semiconductor nanocrystals (NCs) interfaced with molecular ligands that function as charge and energy acceptors are an emerging platform for the design of light-harvesting, photon-upconverting, and photocatalytic materials. However, NC systems explored for these applications often feature high concentrations of bound acceptor ligands, which can lead to ligand-ligand interactions that may alter each system's ability to undergo charge and energy transfer. Here, we demonstrate that aggregation of acceptor ligands impacts the rate of photoinduced NC-to-ligand charge transfer between lead(II) sulfide (PbS) NCs and perylenediimide (PDI) electron acceptors. As the concentration of PDI acceptors is increased, we find the average electron transfer rate from PbS to PDI ligands decreases by nearly an order of magnitude. The electron transfer rate slowdown with increasing PDI concentration correlates strongly with the appearance of PDI aggregates in steady-state absorption spectra. Electronic structure calculations and molecular dynamics (MD) simulations suggest PDI aggregation slows the rate of electron transfer by reducing orbital overlap between PbS charge donors and PDI charge acceptors. While we find aggregation slows electron transfer in this system, the computational models we employ predict ligand aggregation could also be used to speed electron transfer by producing delocalized states that exhibit improved NC-molecule electronic coupling and energy alignment with NC conduction band states. Our results demonstrate that ligand aggregation can alter rates of photoinduced electron transfer between NCs and organic acceptor ligands and should be considered when designing hybrid NC:molecule systems for charge separation.

Sensitivity of sum frequency generation experimental conditions to thin film interference effects.

Sum-frequency generation (SFG) spectroscopy has furthered our understanding of the chemical interfaces that guide key processes in biology, catalysis, environmental science, and energy conversion. However, interpreting SFG spectra of systems containing several internal interfaces, such as thin film electronics, electrochemical cells, and biofilms, is challenging as different interfaces within these structures can produce interfering SFG signals. One potential way to address this issue is to carefully select experimental conditions that amplify the SFG signal of an interface of interest over all others. In this report, we investigate a model two-interface system to assess our ability to isolate the SFG signal from each interface. For SFG experiments performed in a reflective geometry, we find that there are few experimental conditions under which the SFG signal originating from either interface can be amplified and isolated from the other. However, by performing several measurements under conditions that alter their interference, we find that we can reconstruct each signal even in cases where the SFG signal from one interface is more than an order of magnitude smaller than its counterpart. The number of spectra needed for this reconstruction varies depending on the signal-to-noise level of the SFG dataset and the degree to which different experiments in a dataset vary in their sensitivity to each interface. Taken together, our work provides general guidelines for designing experimental protocols that can isolate SFG signals stemming from a particular region of interest within complex samples.

Differential coding of perception in the world's languages.

Is there a universal hierarchy of the senses, such that some senses (e.g., vision) are more accessible to consciousness and linguistic description than others (e.g., smell)? The long-standing presumption in Western thought has been that vision and audition are more objective than the other senses, serving as the basis of knowledge and understanding, whereas touch, taste, and smell are crude and of little value. This predicts that humans ought to be better at communicating about sight and hearing than the other senses, and decades of work based on English and related languages certainly suggests this is true. However, how well does this reflect the diversity of languages and communities worldwide? To test whether there is a universal hierarchy of the senses, stimuli from the five basic senses were used to elicit descriptions in 20 diverse languages, including 3 unrelated sign languages. We found that languages differ fundamentally in which sensory domains they linguistically code systematically, and how they do so. The tendency for better coding in some domains can be explained in part by cultural preoccupations. Although languages seem free to elaborate specific sensory domains, some general tendencies emerge: for example, with some exceptions, smell is poorly coded. The surprise is that, despite the gradual phylogenetic accumulation of the senses, and the imbalances in the neural tissue dedicated to them, no single hierarchy of the senses imposes itself upon language.

Catalyst Halogenation Enables Rapid and Efficient Polymerizations with Visible to Far-Red Light.

The driving of rapid polymerizations with visible to near-infrared light will enable nascent technologies in the emerging fields of bio- and composite-printing. However, current photopolymerization strategies are limited by long reaction times, high light intensities, and/or large catalyst loadings. The improvement of efficiency remains elusive without a comprehensive, mechanistic evaluation of photocatalysis to better understand how composition relates to polymerization metrics. With this objective in mind, a series of methine- and aza-bridged boron dipyrromethene (BODIPY) derivatives were synthesized and systematically characterized to elucidate key structure-property relationships that facilitate efficient photopolymerization driven by visible to far-red light. For both BODIPY scaffolds, halogenation was shown as a general method to increase polymerization rate, quantitatively characterized using a custom real-time infrared spectroscopy setup. Furthermore, a combination of steady-state emission quenching experiments, electronic structure calculations, and ultrafast transient absorption revealed that efficient intersystem crossing to the lowest excited triplet state upon halogenation was a key mechanistic step to achieving rapid photopolymerization reactions. Unprecedented polymerization rates were achieved with extremely low light intensities (<1 mW/cm2) and catalyst loadings (<50 µM), exemplified by reaction completion within 60 s of irradiation using green, red, and far-red light-emitting diodes. Halogenated BODIPY photoredox catalysts were additionally employed to produce complex 3D structures using high-resolution visible light 3D printing, demonstrating the broad utility of these catalysts in additive manufacturing.

Benzannulation through Ruthenium(0)-Catalyzed Transfer Hydrogenative Cycloaddition: Precision Synthesis and Photophysical Characterization of Soluble Diindenoperylenes.

The first application of ruthenium(0)-catalyzed 1,2-dione-diyne [2+2+2] cycloaddition to PAH construction is achieved by the precision synthesis of soluble diindenoperylenes (DIPs), the electronic structures of which were investigated using steady-state absorption and emission, transient absorption, cyclic voltammetry and time-dependent density functional theory.

Low temperature radical initiated hydrosilylation of silicon quantum dots.

The photophysics of silicon quantum dots (QDs) is not well understood despite their potential for many optoelectronic applications. One of the barriers to the study and widespread adoption of Si QDs is the difficulty in functionalizing their surface, to make, for example, a solution-processable electronically-active colloid. While thermal hydrosilylation of Si QDs is widely used, the high temperature typically needed may trigger undesirable side-effects, like uncontrolled polymerization of the terminal alkene. In this contribution, we show that this high-temperature method for installing aromatic and aliphatic ligands on non-thermal plasma-synthesized Si QDs can be replaced with a low-temperature, radical-initiated hydrosilylation method. Materials prepared via this low-temperature route perform similarly to those created via high-temperature thermal hydrosilylation when used in triplet fusion photon upconversion systems, suggesting the utility of low-temperature, radical-initiated methods for creating Si QDs with a range of functional behavior.

Topical application of nebulized human IgG, IgA and IgAM in the lungs of rats and non-human primates.

BACKGROUND: Recurrent and persistent infections are known to affect airways of patients with Primary Immunodeficiency despite appropriate replacement immunoglobulin serum levels. Interestingly, patients with Chronic Obstructive Pulmonary Disease or with non-CF bronchiectasis also show similar susceptibility to such infections. This may be due to the limited availability of immunoglobulins from the systemic circulation in the conductive airways, resulting in local immunodeficiency. Topical application of nebulized plasma-derived immunoglobulins may represent a means to address this deficiency. In this study, we assessed the feasibility of nebulizing plasma-derived immunoglobulins and delivering them into the airways of rats and non-human primates. METHODS: Distinct human plasma-derived immunoglobulin isotype preparations were nebulized with an investigational eFlow® nebulizer and analyzed in vitro or deposited into animals. Biochemical and immunohistological analysis of nebulized immunoglobulins were then performed. Lastly, efficacy of topically applied human plasma-derived immunoglobulins was assessed in an acute Streptococcus pneumoniae respiratory infection in mice. RESULTS: Characteristics of the resulting aerosols were comparable between preparations, even when using solutions with elevated viscosity. Neither the structural integrity nor the biological function of nebulized immunoglobulins were compromised by the nebulization process. In animal studies, immunoglobulins levels were assessed in plasma, broncho-alveolar lavages (BAL) and on lung sections of rats and non-human primates in samples collected up to 72 h following application. Nebulized immunoglobulins were detectable over 48 h in the BAL samples and up to 72 h on lung sections. Immunoglobulins recovered from BAL fluid up to 24 h after inhalation remained structurally and functionally intact. Importantly, topical application of human plasma-derived immunoglobulin G into the airways of mice offered significant protection against acute pneumococcal pneumonia. CONCLUSION: Taken together our data demonstrate the feasibility of topically applying plasma-derived immunoglobulins into the lungs using a nebulized liquid formulation. Moreover, topically administered human plasma-derived immunoglobulins prevented acute respiratory infection.

Triple Helical Ir(ppy)3 Phenylene Cage Prepared by Diol-Mediated Benzannulation: Synthesis, Resolution, Absolute Stereochemistry and Photophysical Properties.

Cyclometalation of a triple helical N-doped phenylene cage prepared by ruthenium(0)-catalyzed diol-diene benzannulation delivers a chiral, conformationally constrained Ir(ppy)3 analogue. Like the parent complex, fac-Ir(ppy)3 , the iridium-containing PAH-cage is phosphorescent, but displays enhanced resistance to oxygen quenching.

Exciton-Delocalizing Ligands Can Speed Up Energy Migration in Nanocrystal Solids.

Researchers have long sought to use surface ligands to enhance energy migration in nanocrystal solids by decreasing the physical separation between nanocrystals and strengthening their electronic coupling. Exciton-delocalizing ligands, which possess frontier molecular orbitals that strongly mix with nanocrystal band-edge states, are well-suited for this role because they can facilitate carrier-wave function extension beyond the nanocrystal core, reducing barriers for energy transfer. This report details the use of the exciton-delocalizing ligand phenyldithiocarbamate (PDTC) to tune the transport rate and diffusion length of excitons in CdSe nanocrystal solids. A film composed of oleate-terminated CdSe nanocrystals is subjected to a solid-state ligand exchange to replace oleate with PDTC. Exciton migration in the films is subsequently investigated by femtosecond transient absorption. Our experiments indicate that the treatment of nanocrystal films with PDTC leads to rapid (∼400 fs) downhill energy migration (∼80 meV), while no such migration occurs in oleate-capped films. Kinetic Monte Carlo simulations allow us to extract both rates and length scales for exciton diffusion in PDTC-treated films. These simulations reproduce dynamics observed in transient absorption measurements over a range of temperatures and confirm excitons hop via a Miller-Abrahams mechanism. Importantly, our experiments and simulations show PDTC treatment increases the exciton hopping rate to 200 fs, an improvement of 5 orders of magnitude relative to oleate-capped films. This exciton hopping rate stands as one of the fastest determined for CdSe solids. The facile, room-temperature processing and improved transport properties offered by the solid-state exchange of exciton-delocalizing ligands show they offer promise for the construction of strongly coupled nanocrystal arrays.

Helical Rod-like Phenylene Cages via Ruthenium Catalyzed Diol-Diene Benzannulation: A Cord of Three Strands.

p-Bromo-terminated oligo(p-phenylenevinylenes) emanating from a 1,3,5-benzene core are dihydroxylated and subjected to ruthenium catalyzed diol-diene benzannulation to form tripodal oligo(phenylenes). Copper- or nickel-mediated 3-fold reductive biaryl homocoupling delivers a series of triple-stranded phenylene cages of helical rod-like topology bearing 14, 17, and 20 benzene rings.

Singlet Fission Involves an Interplay between Energetic Driving Force and Electronic Coupling in Perylenediimide Films.

Due to its ability to offset thermalization losses in photoharvesting systems, singlet fission has become a topic of research interest. During singlet fission, a high energy spin-singlet state in an organic semiconductor divides its energy to form two lower energy spin-triplet excitations on neighboring chromophores. While key insights into mechanisms leading to singlet fission have been gained recently, developing photostable compounds that undergo quantitative singlet fission remains a key challenge. In this report, we explore triplet exciton production via singlet fission in films of perylenediimides, a class of compounds with a long history of use as industrial dyes and pigments due to their photostability. As singlet fission necessitates electron transfer between neighboring molecules, its rate and yield depend sensitively on their local arrangement. By adding different functional groups at their imide positions, we control how perylenediimides pack in the solid state. We find inducing a long axis displacement of ∼3 Šbetween neighboring perylenediimides gives a maximal triplet production yield of 178% with a fission rate of ∼245 ps despite the presence of an activation barrier of ∼190 meV. These findings disagree with Marcus theory predictions for the optimal perylenediimide geometry for singlet fission, but do agree with Redfield theory calculations that allow singlet fission to occur via a charge transfer-mediated superexchange mechanism. Unfortunately, triplets produced by singlet fission are found to decay over tens of nanoseconds. Our results highlight that singlet fission materials must be designed to not only produce triplet excitons but to also facilitate their extraction.

Surface States Mediate Triplet Energy Transfer in Nanocrystal-Acene Composite Systems.

Hybrid organic:inorganic materials composed of semiconductor nanocrystals functionalized with acene ligands have recently emerged as a promising platform for photon upconversion. Infrared light absorbed by a nanocrystal excites charge carriers that can pass to surface-bound acenes, forming triplet excitons capable of fusing to produce visible radiation. To fully realize this scheme, energy transfer between nanocrystals and acenes must occur with high efficiency, yet the mechanism of this process remains poorly understood. To improve our knowledge of the fundamental steps involved in nanoparticle:acene energy transfer, we used ultrafast transient absorption to investigate excited electronic dynamics of PbS nanocrystals chemically functionalized with 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene) ligands. We find photoexcitation of PbS does not lead to direct triplet energy transfer to surface-bound TIPS-pentacene molecules but rather to the formation of an intermediate state within 40 ps. This intermediate persists for ∼100 ns before evolving to produce TIPS-pentacene triplet excitons. Analysis of transient absorption lineshapes suggests this intermediate corresponds to charge carriers localized at the PbS nanocrystal surface. This hypothesis is supported by constrained DFT calculations that find a large number of spin-triplet states at PbS NC surfaces. Though some of these states can facilitate triplet transfer, others serve as traps that hinder it. Our results highlight that nanocrystal surfaces play an active role in mediating energy transfer to bound acene ligands and must be considered when optimizing composite NC-based materials for photon upconversion, photocatalysis, and other optoelectronic applications.

Climate, vocal folds, and tonal languages: Connecting the physiological and geographic dots.

We summarize a number of findings in laryngology demonstrating that perturbations of phonation, including increased jitter and shimmer, are associated with desiccated ambient air. We predict that, given the relative imprecision of vocal fold vibration in desiccated versus humid contexts, arid and cold ecologies should be less amenable, when contrasted to warm and humid ecologies, to the development of languages with phonemic tone, especially complex tone. This prediction is supported by data from two large independently coded databases representing 3,700+ languages. Languages with complex tonality have generally not developed in very cold or otherwise desiccated climates, in accordance with the physiologically based predictions. The predicted global geographic-linguistic association is shown to operate within continents, within major language families, and across language isolates. Our results offer evidence that human sound systems are influenced by environmental factors.

Prevention of Influenza Virus-Induced Immunopathology by TGF-ß Produced during Allergic Asthma.

Asthma is believed to be a risk factor for influenza infection, however little experimental evidence exists to directly demonstrate the impact of asthma on susceptibility to influenza infection. Using a mouse model, we now report that asthmatic mice are actually significantly more resistant to a lethal influenza virus challenge. Notably, the observed increased resistance was not attributable to enhanced viral clearance, but instead, was due to reduced lung inflammation. Asthmatic mice exhibited a significantly reduced cytokine storm, as well as reduced total protein levels and cytotoxicity in the airways, indicators of decreased tissue injury. Further, asthmatic mice had significantly increased levels of TGF-ß1 and the heightened resistance of asthmatic mice was abrogated in the absence of TGF-ß receptor II. We conclude that a transient increase in TGF-ß expression following acute asthma can induce protection against influenza-induced immunopathology.