Cyanide Poisoning Compromises Gene Pathways Modulating Cardiac Injury in Vivo.

Smoke inhalation from a structure fire is a common route of cyanide poisoning in the U.S. Cyanide inhibits cellular respiration, often leading to death. Its rapid distribution throughout the body can result in injuries to multiple organs, and cyanide victims were reported to experience myocardial infarction and other cardiac complications. However, molecular mechanisms of such complications are yet to be elucidated. While FDA-approved CN antidotes such as sodium thiosulfate and hydroxocobalamin are clinically used, they have foreseeable limitations during mass casualty situations because they require intravenous administration. To facilitate the development of better antidotes and therapeutic treatments, a global view of molecular changes induced by cyanide exposure is necessary. As an exploratory pursuit, we performed oligonucleotide microarrays to establish cardiac transcriptomes of an animal model of nose-only inhalation exposure to hydrogen cyanide (HCN), which is relevant to smoke inhalation. We also profiled cardiac transcriptomes after subcutaneous injection of potassium cyanide (KCN). Although the KCN injection model has often been used to evaluate medical countermeasures, this study demonstrated that cardiac transcriptomes are largely different from that of the HCN inhalation model at multiple time points within 24 h after exposure. Pathway analysis identified that HCN-induced transcriptomes were enriched with genes encoding mediators of pathways critical in modulation of cardiac complications and that a large number of such genes were significantly decreased in expression. We utilized the upstream regulatory analysis to propose drugs that can be potentially employed to treat cyanide-induced cardiac complications.

Metabolism of Cyanide by Glutathione To Produce the Novel Cyanide Metabolite 2-Aminothiazoline-4-oxoaminoethanoic Acid.

The direct analysis of cyanide (HCN or CN- inclusively symbolized as CN) to confirm exposure has major limitations due to cyanide's volatility, reactivity, and short half-life in biological fluids. These limitations have led to the exploration of cyanide detoxification products for indirect verification of cyanide exposure. Although cyanide interacts strongly with sulfur-containing molecules, to date, biomarkers resulting from the interaction of cyanide with glutathione (GSH; i.e., a biologically abundant sulfur-donating biomolecule) have yet to be discovered. In this study, we studied the interaction of CN and GSH to produce 2-aminothiazoline-4-oxoaminoethanioc acid (ATOEA). An LC-MS/MS method was developed and validated to analyze ATOEA from plasma, producing a linear range of 0.5-50 µM, a limit of detection of 200 nM, and excellent precision and accuracy. ATOEA concentrations were significantly elevated in the plasma of animals following cyanide exposure. Moreover, the production of ATOEA from cyanide exposure was confirmed by detection of both ATOEA and ATOEA-13C15N in rabbit plasma ( N = 11 animals) following administration of NaCN:K13C15N (1:1), with a similar amount of ATOEA and ATOEA-13C15N formed ( R2 = 0.9924, p < 0.05). The concentration of ATOEA increased with cyanide dose and then decreased rapidly when an antidote was administrated. This study definitively showed that ATOEA is produced from interaction of CN and GSH and can serve as a biomarker of cyanide exposure.

Antidotal efficacies of the cyanide antidote candidate dimethyl trisulfide alone and in combination with cobinamide derivatives.

Formulation optimization and antidotal combination therapy are the two important tools to enhance the antidotal protection of the cyanide (CN) antidote dimethyl trisulfide (DMTS). The focus of this study is to demonstrate how the formulation with polysorbate 80 (Poly80), an excipient used in pharmaceutical technology, and the combinations with other CN antidotes having different mechanisms of action enhance the antidotal efficacy of the unformulated (neat) DMTS. The LD50 for CN was determined by the statistical Dixon up-and-down method on mice. Antidotal efficacy was expressed as antidotal potency ratio (APR). CN was injected subcutaneously one minute prior to the antidotes' injection intramuscularly. The APR values of 1.17 (dose: 25 mg/kg bodyweight) and 1.45 (dose: 50 mg/kg bodyweight) of the neat DMTS were significantly enhanced by the Poly80 formulation at both investigated doses to 2.03 and 2.33, respectively. The combination partners for the Poly80 formulated DMTS (DMTS-Poly80; 25 and 50 mg/kg bodyweight) were 4-nitrocobinamide (4NCbi) (20 mg/kg bodyweight) and aquohydroxocobinamide (AHCbi; 50, 100, and 250 mg/kg bodyweight). When DMTS-Poly80 (25 and 50 mg/kg bodyweight; APR = 2.03 and 2.33, respectively) was combined with 4NCbi (20 mg/kg bodyweight; APR = 1.35), significant increase in the APR values were noted at both DMTS doses (APR = 2.38 and 3.12, respectively). AHCbi enhanced the APR of DMTS-Poly80 (100 mg/kg bodyweight; APR = 3.29) significantly only at the dose of 250 mg/kg bodyweight (APR = 5.86). These studies provided evidence for the importance of the formulation with Poly80 and the combinations with cobinamide derivatives with different mechanisms of action for DMTS as a CN antidote candidate.

Parenteral dosage form development and testing of dimethyl trisulfide, as an antidote candidate to combat cyanide intoxication.

This study focused on the solubility enhancement and the in vivo antidotal efficacy testing of a new potential cyanide (CN) countermeasure, dimethyl trisulfide (DMTS). Various FDA approved cyclodextrins (HPßCD, RMßCD, HPγCD), cosolvents (ethanol, polyethylene glycols, propylene glycol), surfactants (cremophor EL, cremophor RH 40, sodium cholate, sodium deoxycholate, polysorbate 80) and their combinations were applied. Based on the solubility enhancing potential of the tested systems, polysorbate 80 was chosen for further in vivo efficacy studies. A composition comprising 15% polysorbate 80 and 50 mg/ml DMTS with the applied DMTS dose of 100 mg/kg provided a therapeutic antidotal protection of 3.4 × LD50. For comparison, the present therapy of sodium thiosulfate (TS) with the dose of 100 mg/kg provided only 1.1 × LD50 protection, and at the dose of 200 mg/kg, the LD50 was enhanced by 1.3 times. No difference in the therapeutic protection by DMTS was detected when the concentration of polysorbate 80 was increased to 20% (3.2 × LD50 protection). These data demonstrate the potential importance of DMTS as a CN countermeasure, and the formulation comprising polysorbate 80 provides the base of an injectable intramuscular dosage form that can later serve as a CN antidotal kit suitable for mass scenario.

Dimethyl trisulfide: A novel cyanide countermeasure.

In the present studies, the in vitro and in vivo efficacies of a novel cyanide countermeasure, dimethyl trisulfide (DMTS), were evaluated. DMTS is a sulfur-based molecule found in garlic, onion, broccoli, and similar plants. DMTS was studied for effectiveness as a sulfur donor-type cyanide countermeasure. The sulfur donor reactivity of DMTS was determined by measuring the rate of the formation of the cyanide metabolite thiocyanate. In experiments carried out in vitro in the presence of the sulfurtransferase rhodanese (Rh) and at the experimental pH of 7.4, DMTS was observed to convert cyanide to thiocyanate with greater than 40 times higher efficacy than does thiosulfate, the sulfur donor component of the US Food and Drug Administration-approved cyanide countermeasure Nithiodote® In the absence of Rh, DMTS was observed to be almost 80 times more efficient than sodium thiosulfate in vitro The fact that DMTS converts cyanide to thiocyanate more efficiently than does thiosulfate both with and without Rh makes it a promising sulfur donor-type cyanide antidote (scavenger) with reduced enzyme dependence in vitro The therapeutic cyanide antidotal efficacies for DMTS versus sodium thiosulfate were measured following intramuscular administration in a mouse model and expressed as antidotal potency ratios (APR = LD50 of cyanide with antidote/LD50 of cyanide without antidote). A dose of 100 mg/kg sodium thiosulfate given intramuscularly showed only slight therapeutic protection (APR = 1.1), whereas the antidotal protection from DMTS given intramuscularly at the same dose was substantial (APR = 3.3). Based on these data, DMTS will be studied further as a promising next-generation countermeasure for cyanide intoxication.

Development of a fluorescence-based sensor for rapid diagnosis of cyanide exposure.

Although commonly known as a highly toxic chemical, cyanide is also an essential reagent for many industrial processes in areas such as mining, electroplating, and synthetic fiber production. The "heavy" use of cyanide in these industries, along with its necessary transportation, increases the possibility of human exposure. Because the onset of cyanide toxicity is fast, a rapid, sensitive, and accurate method for the diagnosis of cyanide exposure is necessary. Therefore, a field sensor for the diagnosis of cyanide exposure was developed based on the reaction of naphthalene dialdehyde, taurine, and cyanide, yielding a fluorescent ß-isoindole. An integrated cyanide capture "apparatus", consisting of sample and cyanide capture chambers, allowed rapid separation of cyanide from blood samples. Rabbit whole blood was added to the sample chamber, acidified, and the HCN gas evolved was actively transferred through a stainless steel channel to the capture chamber containing a basic solution of naphthalene dialdehyde (NDA) and taurine. The overall analysis time (including the addition of the sample) was <3 min, the linear range was 3.13-200 µM, and the limit of detection was 0.78 µM. None of the potential interferents investigated (NaHS, NH4OH, NaSCN, and human serum albumin) produced a signal that could be interpreted as a false positive or a false negative for cyanide exposure. Most importantly, the sensor was 100% accurate in diagnosing cyanide poisoning for acutely exposed rabbits.

Chemical and metabolomic screens identify novel biomarkers and antidotes for cyanide exposure.

Exposure to cyanide causes a spectrum of cardiac, neurological, and metabolic dysfunctions that can be fatal. Improved cyanide antidotes are needed, but the ideal biological pathways to target are not known. To understand better the metabolic effects of cyanide and to discover novel cyanide antidotes, we developed a zebrafish model of cyanide exposure and scaled it for high-throughput chemical screening. In a screen of 3120 small molecules, we discovered 4 novel antidotes that block cyanide toxicity. The most potent antidote was riboflavin. Metabolomic profiling of cyanide-treated zebrafish revealed changes in bile acid and purine metabolism, most notably by an increase in inosine levels. Riboflavin normalizes many of the cyanide-induced neurological and metabolic perturbations in zebrafish. The metabolic effects of cyanide observed in zebrafish were conserved in a rabbit model of cyanide toxicity. Further, humans treated with nitroprusside, a drug that releases nitric oxide and cyanide ions, display increased circulating bile acids and inosine. In summary, riboflavin may be a novel treatment for cyanide toxicity and prophylactic measure during nitroprusside treatment, inosine may serve as a biomarker of cyanide exposure, and metabolites in the bile acid and purine metabolism pathways may shed light on the pathways critical to reversing cyanide toxicity.

Simultaneous high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS-MS) analysis of cyanide and thiocyanate from swine plasma.

An analytical procedure for the simultaneous determination of cyanide and thiocyanate in swine plasma was developed and validated. Cyanide and thiocyanate were simultaneously analyzed by high-performance liquid chromatography tandem mass spectrometry in negative ionization mode after rapid and simple sample preparation. Isotopically labeled internal standards, Na(13)C(15)N and NaS(13)C(15)N, were mixed with swine plasma (spiked and nonspiked), proteins were precipitated with acetone, the samples were centrifuged, and the supernatant was removed and dried. The dried samples were reconstituted in 10 mM ammonium formate. Cyanide was reacted with naphthalene-2,3-dicarboxaldehyde and taurine to form N-substituted 1-cyano[f]benzoisoindole, while thiocyanate was chemically modified with monobromobimane to form an SCN-bimane product. The method produced dynamic ranges of 0.1-50 and 0.2-50 µM for cyanide and thiocyanate, respectively, with limits of detection of 10 nM for cyanide and 50 nM for thiocyanate. For quality control standards, the precision, as measured by percent relative standard deviation, was below 8 %, and the accuracy was within ±10 % of the nominal concentration. Following validation, the analytical procedure successfully detected cyanide and thiocyanate simultaneously from the plasma of cyanide-exposed swine.

Comparison of cyanide exposure markers in the biofluids of smokers and non-smokers.

Cyanide is highly toxic and is present in many foods, combustion products (e.g. cigarette smoke), industrial processes, and has been used as a terrorist weapon. In this study, cyanide and its major metabolites, thiocyanate and 2-amino-2-thiazoline-4-carboxylic acid (ATCA), were analyzed from various human biofluids of smokers (low-level chronic cyanide exposure group) and non-smokers to gain insight into the relationship of these biomarkers to cyanide exposure. The concentrations of each biomarker tested were elevated for smokers in each biofluid. Significant differences (p < 0.05) were found for thiocyanate in plasma and urine, and ATCA showed significant differences in plasma and saliva. Additionally, biomarker concentration ratios, correlations between markers of cyanide exposure, and other statistical methods were performed to better understand the relationship between cyanide and its metabolites. Of the markers studied, the results indicate plasma ATCA, in particular, showed excellent promise as a biomarker for chronic low-level cyanide exposure.

Simultaneous determination of cyanide and thiocyanate in plasma by chemical ionization gas chromatography mass-spectrometry (CI-GC-MS).

An analytical method utilizing chemical ionization gas chromatography-mass spectrometry was developed for the simultaneous determination of cyanide and thiocyanate in plasma. Sample preparation for this analysis required essentially one-step by combining the reaction of cyanide and thiocyanate with pentafluorobenzyl bromide and simultaneous extraction of the product into ethyl acetate facilitated by a phase-transfer catalyst, tetrabutylammonium sulfate. The limits of detection for cyanide and thiocyanate were 1 µM and 50 nM, respectively. The linear dynamic range was from 10 µM to 20 mM for cyanide and from 500 nM to 200 µM for thiocyanate with correlation coefficients higher than 0.999 for both cyanide and thiocyanate. The precision, as measured by %RSD, was below 9 %, and the accuracy was within 15 % of the nominal concentration for all quality control standards analyzed. The gross recoveries of cyanide and thiocyanate from plasma were over 90 %. Using this method, the toxicokinetic behavior of cyanide and thiocyanate in swine plasma was assessed following cyanide exposure.

Evaluation of aqueous dimethyl trisulfide as an antidote to a highly lethal cyanide poisoning in a large swine model.

BACKGROUND: Cyanide is a rapid acting, lethal, metabolic poison and remains a significant threat. Current FDA-approved antidotes are not amenable or efficient enough for a mass casualty incident. OBJECTIVE: The objective of this study is to evaluate short and long-term efficacy of intramuscular aqueous dimethyl trisulfide (DMTS) on survival and clinical outcomes in a swine model of cyanide exposure. METHODS: Anesthetized swine were instrumented and acclimated until breathing spontaneously. Potassium cyanide infusion was initiated and continued until 5 min after the onset of apnea. Subsequently, animals were treated with intramuscular DMTS (n = 11) or saline control (n = 10). Laboratory values and DMTS blood concentrations were assessed at various time points and physiological parameters were monitored continuously until the end of the experiment unless death occurred. A subset of animals treated with DMTS (n = 5) were survived for 7 days to evaluate muscle integrity by repeat biopsy and neurobehavioral outcomes. RESULTS: Physiological parameters and time to apnea were similar in both groups at baseline and at time of treatment. Survival in the DMTS-treated group was 90% and 30% in saline controls (p = 0.0034). DMTS-treated animals returned to breathing at 12.0 ± 10.4 min (mean ± SD) compared to 22.9 ± 7.0 min (mean ± SD) in the 3 surviving controls. Blood collected prior to euthanasia showed improved blood lactate concentrations in the DMTS treatment group; 5.47 ± 2.65 mmol/L vs. 9.39 ± 4.51 mmol/L (mean ± SD) in controls (p = 0.0310). Low concentrations of DMTS were detected in the blood, gradually increasing over time with no elimination phase observed. There was no mortality, histological evidence of muscle trauma, or observed adverse neurobehavioral outcomes, in DMTS-treated animals survived to 7 days. CONCLUSION: Intramuscular administration of aqueous DMTS improves survival following cyanide poisoning with no observed long-term effects on muscle integrity at the injection site or adverse neurobehavioral outcomes.

Organ-distribution of the metabolite 2-aminothiazoline-4-carboxylic acid in a rat model following cyanide exposure.

The reaction of cyanide (CN(-)) with cystine to produce 2-aminothiazoline-4-carboxylic acid (ATCA) is one of the independent detoxification pathways of cyanide in biological systems. In this report, in vivo production of ATCA and its distributions in plasma and organs were studied after a subcutaneous sublethal dose of 4 mg/kg body weight potassium cyanide (KCN) administration to rats. At this sublethal dose of KCN, ATCA concentration was not significantly increased in the plasma samples, however, it was found significantly increased in liver samples. These results suggested that ATCA might not be a good diagnostic biomarker in plasma for sublethal cyanide exposure; however, liver could serve as the right organ for the detection of ATCA in post-mortem examinations involving cyanide exposure in military, firefighting, industrial and forensic settings.

Can isosorbide dinitrate oral spray serve as an immediate bridging therapy for a mass cyanide poisoning?

OBJECTIVE: In this proof-of-concept study, the aim was to evaluate the short-term clinical effectiveness of isosorbide dinitrate (ISDN) oral spray in non-anaesthetized cyanide-poisoned swine. METHODS: A comparative study was conducted using domestic swine. Animals were intravenously poisoned with potassium cyanide (KCN), either 2 mg/kg or 4 mg/kg dose. Two control groups (one for each cyanide dose) were not further treated. Two other groups (one for each cyanide dose) were treated within 1 min after poisoning with ISDN oral spray: 3 spray actuations (averaging a total of 3.75 mg) after the lower cyanide dose and 4 spray actuations (averaging a total of 5.0 mg) after the higher dose. The study outcomes were clinical score, time to death, and blood tests including pH, lactate, and methemoglobin levels. RESULTS: All the animals started to convulse within 20 to 30 sec after KCN poisoning, then became unresponsive and hemodynamically depressed after another 20 to 30 sec. After the KCN 2 mg/kg dose, 3 of 4 control animals survived, while all treated animals survived. Compared with control animals, ISDN-treated animals displayed significantly better clinical scores starting 5 min after KCN poisoning. Acidosis was significantly more pronounced in the untreated animals. After the KCN 4 mg/kg dose, similar survival rates were observed for control and ISDN-treated groups (1/4), but treated animals had longer time to death and better pH and lactate levels. CONCLUSION: ISDN oral spray administration following KCN poisoning in this porcine model did not result in statistically significant increased survival. However, based on clinical scores and clinical laboratory values, ISDN may benefit as a bridging countermeasure until currently-available specific cyanide antidotes can be administered. Further research is warranted to better characterize this potential role of ISDN in cyanide poisoning.

Analysis of the Soil Fumigant, Dimethyl Disulfide, in Swine Blood by Dynamic Headspace Gas Chromatography-Mass Spectroscopy.

Plant parasites and soilborne pathogens directly reduce the overall yield of crops, vegetables, and fruits, negatively impacting the market demand for these products and their net profitability. While preplant soil fumigation helps maintain the consistent production quality of high-value cash crops, most soil fumigants are toxic to off-target species, including humans. Dimethyl disulfide (DMDS) has recently been introduced as a relatively low toxicity soil fumigant. Although DMDS exhibits low toxicity compared to other soil fumigants, it is volatile and exposure can cause eye, nasal, and upper respiratory tract irritation, skin irritation, nausea, dizziness, headache, and fatigue. While there is one analysis method available for DMDS from biological matrices, it has significant disadvantages. Hence, in this study, a dynamic headspace gas chromatography-mass spectroscopy (DHS-GC-MS) method was developed for the analysis of DMDS in swine whole blood. This method is highly sensitive and requires only three steps: 1) acid denaturation, 2) addition of internal standard, and 3) DHS-GC-MS analysis. The method produced a wide linear range from 0.1 - 200 µM with an excellent limit of detection of 30 nM. Intra- and interassay accuracy (100±14% and 100±11%, respectively) and precision (<5% and <6% relative standard deviation, respectively) were also excellent. The method worked well to quantify the DMDS levels in the blood of dimethyl trisulfide (DMTS)-treated swine (i.e., DMDS is a byproduct of DMTS treatment) with no interfering substances at or around the retention time of DMDS (i.e., 2.7 min). This simple, rapid, and extremely sensitive method can be used for the quantification of DMDS levels in blood to verify exposure to DMDS or to monitor levels of DMDS following DMTS treatment (e.g., for cyanide poisoning).

Diagnosis of cyanide poisoning using an automated, field-portable sensor for rapid analysis of blood cyanide concentrations.

Cyanide (both HCN and CN- are represented by CN) has multiple industrial applications, is commonly found in some foods, and is a component of fire smoke. Upon exposure, CN blocks production of adenosine triphosphate, causing cellular hypoxia and cytotoxic anoxia, which can eventually result in death. Considering CN's quick onset of action and the long analysis times associated with current techniques, the objective of this study was to develop and validate a rapid and field-portable sensor to detect blood CN concentrations focusing on both concentration and diagnostic accuracy. The sensor takes advantage of the chemical properties of CN by converting it exclusively to HCN via acidification of whole blood. High-speed headspace transfer is used to deliver HCN to a capture solution where it is reacted with naphthalene dialdehyde and taurine to produce a fluorescent ß-isoindole product. Simple spectrofluorometric analysis of the product provides quantitative analysis of CN from whole blood in 60 s and requires only 25 µL of blood (obtainable via fingerstick). A limit of detection of 5 µM, a linear range of 10-200 µM (with ≥15 µM considered CN exposed), and excellent accuracy (100 ± 15%) and precision (≤15.2% relative standard deviation) were obtained. To evaluate the diagnostic accuracy of the sensor, rabbit blood samples (N = 190, including 24 blinded samples) were analyzed by both the sensor and a lab-based spectrophotometric method. An excellent positive correlation was obtained between the sensor and the lab-based method (R2 ˃ 0.995) confirming the concentration accuracy of the CN sensor. Moreover, the sensor produced no false positives or negatives when diagnosing CN poisoning.

Evaluation of the Long-Term Storage Stability of the Cyanide Antidote: Dimethyl Trisulfide and Degradation Product Identification.

This study reports the long-term storage stability of a formulation of the cyanide (CN) antidote dimethyl trisulfide (DMTS). The F3-formulated DMTS was stored in glass ampules at 4, 22, and 37 °C. Over a period of one year, nine ampules (n = 3 at each temperature) were analyzed by high-performance liquid chromatography (HPLC)-UV/vis at daily time intervals in the first week, weekly time intervals in the first month, and monthly thereafter for a period of one year to determine the DMTS content. No measurable loss of DMTS was found at 4 and 22 °C, and good stability was noted up to five months for samples stored at 37 °C. At 37 °C, a 10% (M/M) decrease of DMTS was discovered at the sixth month and only 30% (M/M) of DMTS remained by the end of the study; discoloration of the formulation and the growth of new peaks in the HPLC chromatogram were also observed. To identify the unknown peaks at 37 °C, controlled oxidation studies were performed on DMTS using two strong oxidizing agents: meta-chloroperoxybenzoic acid (mCPBA) and hydrogen peroxide (H2O2). Dimethyl tetrasulfide and dimethyl pentasulfide were observed as products using both of the oxidizing agents. Dimethyl disulfide was also observed as a product of degradation, which was further oxidized to S-methyl methanethiosulfonate only when mCPBA was used. HPLC-UV/vis and gas chromatography-mass spectrometry/solid phase microextraction analysis revealed good agreement between the degradation products of the stability study at 37 °C and those of disproportionation reactions. Furthermore, at 4 and 22 °C, chromatograms were remarkably stable over the one-year study period, indicating that the F3-formulated DMTS shows excellent long-term storage stability at T ≤ 22 °C.

The analysis of 2-amino-2-thiazoline-4-carboxylic acid in the plasma of smokers and non-smokers.

ATCA (2-amino-2-thiazoline-4-carboxylic acid) is a promising marker to assess cyanide exposure because of several advantages of ATCA analysis over direct determination of cyanide and alternative cyanide biomarkers (i.e. stability in biological matrices, consistent recovery, and relatively small endogenous concentrations). Concentrations of ATCA in the plasma of smoking and non-smoking human volunteers were analyzed using gas-chromatography mass-spectrometry to establish the feasibility of using ATCA as a marker for cyanide exposure. The levels of ATCA in plasma of smoking volunteers, 17.2 ng/ml, were found to be significantly (p < 0.001) higher than that of non-smoking volunteers, 11.8 ng/ml. Comparison of ATCA concentrations of smokers relative to non-smokers in both urine and plasma yielded relatively similar results. The concentration ratio of ATCA for smokers versus non-smokers in plasma and urine was compared to similar literature studies of cyanide and thiocyanate, and correlations are discussed. This study supports previous evidence that ATCA can be used to determine past cyanide exposure and indicates that further studies should be pursued to validate the use of ATCA as a marker of cyanide exposure.

Determination of free cyano-cobinamide in swine and rabbit plasma by liquid chromatography tandem mass spectrometry.

In recent years, Cobinamide (Cbi) has shown promise as a therapeutic for cyanide poisoning. There are several forms of Cbi based on the identity of the ligands bound to the cobalt in Cbi and these different forms of Cbi have divergent behavior (e.g., the aquo and hydroxo forms of Cbi readily bind to proteins, limiting their distribution significantly, whereas [Cbi(CN)2] does not). While current analysis techniques only measure total Cbi, methods to elucidate the behavior of 'available' Cbi versus cyanide-complexed Cbi would be valuable for biomedical and pharmacokinetic studies. Therefore, a method was developed for the analysis of cyanide-complexed Cbi in plasma via liquid chromatography tandem mass spectrometry (LC-MS-MS). Plasma samples were prepared by denaturing proteins with 10% ammonium hydroxide in acetonitrile. The resulting mixture was centrifuged, and the supernatant was removed, dried, and reconstituted. Cyanide-complexed Cbi was then analyzed via LC-MS-MS. The limit of detection was 0.2 µM, and the linear dynamic range was between 1 and 200 µM. The accuracy was 100 ±â€¯17% and the precision, measured by relative standard deviation (%RSD), was ≤18.5%. Carryover, a severe problem when analyzing Cbi via liquid chromatography was eliminated using a polymeric-based stationary phase (PLRP-S) and a controlled washing protocol. The method allowed evaluation of the cyanide-bound and 'available' Cbi from treated animals and, when paired with a method for total Cbi analysis, allows for estimation of Cbi utilization when treating cyanide poisoning.

Behavioural and physiological assessments of dimethyl trisulfide treatment for acute oral sodium cyanide poisoning.

Sodium cyanide (NaCN) is a commonly and widely used industrial and laboratory chemical that is highly toxic. Its availability and rapid harmful/lethal effects combine to make cyanide a potential foodborne/waterborne intentional-poisoning hazard. Effective antidotes to cyanide poisoning are currently approved only for intravenous administration. Therefore, an effective cyanide antidote that can be administered intramuscularly in pre-hospital and/or mass-casualty settings is needed. Dimethyl trisulfide (DMTS) is a naturally occurring substance used as a flavour enhancer in foods. DMTS has shown antidotal efficacy in cyanide poisoning and is thought to act as both a sulphur donor and partial methaemoglobin inducer. In this study, an intramuscular injection of DMTS (6.25-200 mg/kg) was given to rats 1 minute after an oral dose of NaCN (98.2 mg/kg; twice the median lethal dose) to test the antidotal efficacy and safety of DMTS treatment. Toxic signs and survival were examined along with behavioural function (up to 30 hour after ingestion) using a previously established operant behavioural model. A large range of DMTS doses (6.25-100 mg/kg) increased survival after oral cyanide poisoning, and the lower DMTS doses (6.25-25 mg/kg) also proved to be behaviourally and physiologically safe. Larger DMTS doses (50-200 mg/kg) produced side effects (ie, inflammation and limping) that were more severe and protracted than those observed at lower DMTS doses. The 25 mg/kg DMTS proved to be the most efficacious (increasing survival from 20% to 75%) and also produced minimal side effects (eg, inflammation) that resolved within 24-72 hour. Thus, DMTS shows promise as an intramuscularly administered cyanide antidote useful for prompt pre-hospital or mass-casualty emergency medical treatment.

Analysis of potential cyanide antidote, dimethyl trisulfide, in whole blood by dynamic headspace gas chromatography-mass spectroscopy.

Cyanide is a rapidly acting and highly toxic chemical. It inhibits cytochrome c oxidase in the mitochondrial electron transport chain, resulting in cellular hypoxia, cytotoxic anoxia and potentially death. In order to overcome challenges associated with current cyanide antidotes, dimethyl trisulfide (DMTS), which converts cyanide to less toxic thiocyanate in vivo, has gained much attention recently as a promising next-generation cyanide antidote. While there are three analysis methods available for DMTS, they each have significant disadvantages. Hence, in this study, a dynamic headspace (DHS) gas chromatography-mass spectroscopy method was developed for the analysis of DMTS from rabbit whole blood. The method is extremely simple, involving only acidification of a blood sample, addition of an internal standard (DMTS-d6) and DHS-GC-MS analysis. The method produced a limit of detection of 0.04 µM for DMTS with dynamic range from 0.2 to 50 µM. Inter- and intraassay accuracy (100 ± 15% and 100 ± 9%, respectively), and precision (<10% and <9% relative standard deviation, respectively) were good. The validated method performed well during pharmacokinetic analysis of DMTS from the blood of rats treated with DMTS, producing excellent pharmacokinetic parameters for the treatment of cyanide exposure. The method produced significant advantages over current methods for analysis of DMTS and should be considered as a "gold standard" method for further development of DMTS as a potential next-generation cyanide countermeasure.