A three-dimensional engineered tumour for spatial snapshot analysis of cell metabolism and phenotype in hypoxic gradients.

The profound metabolic reprogramming that occurs in cancer cells has been investigated primarily in two-dimensional cell cultures, which fail to recapitulate spatial aspects of cell-to-cell interactions as well as tissue gradients present in three-dimensional tumours. Here, we describe an engineered model to assemble three-dimensional tumours by rolling a scaffold-tumour composite strip. By unrolling the strip, the model can be rapidly disassembled for snapshot analysis, allowing spatial mapping of cell metabolism in concert with cell phenotype. We also show that the establishment of oxygen gradients within samples that are shaped by oxygen-dependent signalling pathways, as well as the consequential variations in cell growth, response to hypoxic gradients extending from normoxia to severe hypoxia, and therapy responsiveness, are consistent with those of tumours in vivo. Moreover, by using liquid chromatography tandem mass spectrometry, we mapped cellular metabolism and identified spatially defined metabolic signatures of cancer cells to reveal both known and novel metabolic responses to hypoxia.

Development of a bioprinting approach for automated manufacturing of multi-cell type biocomposite TRACER strips using contact capillary-wicking.

In many types of solid cancer, interactions between tumour cells and their surrounding microenvironment significantly impact disease progression, and patient prognosis. Tissue engineered models permit investigations of cellular behaviour and interactions in the context of this diseased microenvironment. Previously our group developed the tissue roll for analysis of cellular environment and response (TRACER) platform. To improve the manufacturing robustness of the TRACER platform and to enhance its use for studies involving multiple cell types, we have developed a bioprinting process that deposits cell-laden collagen hydrogel into a thin cellulose scaffolding sheet though a contact-wicking printing process. Printed scaffolds can then be assembled into layered 3D cultures where the location of cells in 3D is dependent on their printed position in the 2D sheet. After a desired culture time 3D TRACERs can be disassembled to easily assess printed cell re-location and phenotype within the heterogeneous microenvironments of the 3D tissue. In our bioprinting manufacturing process, cells are printed into scaffolding sheets, using a modified 3D bioprinter to extrude cells encapsulated in unmodified collagen hydrogel through a polydimethylsiloxane (PDMS) printer extrusion nozzle. This nozzle design reproducibly generated bioink deposition profiles in the scaffold without causing significant cellular damage or compromising scaffold integrity. We assessed print pattern quality and reproducibility and demonstrated printing of co-culture strips containing tumour cells and fibroblasts in separate compartments (i.e. separate TRACER layers). This printing approach will potentially enable adoption of the TRACER platform to the broader community to better understand multi-cell type interactions in 3D tumours and tissues.

The Current Landscape of 3D In Vitro Tumor Models: What Cancer Hallmarks Are Accessible for Drug Discovery?

Cancer prognosis remains a lottery dependent on cancer type, disease stage at diagnosis, and personal genetics. While investment in research is at an all-time high, new drugs are more likely to fail in clinical trials today than in the 1970s. In this review, a summary of current survival statistics in North America is provided, followed by an overview of the modern drug discovery process, classes of models used throughout different stages, and challenges associated with drug development efficiency are highlighted. Then, an overview of the cancer hallmarks that drive clinical progression is provided, and the range of available clinical therapies within the context of these hallmarks is categorized. Specifically, it is found that historically, the development of therapies is limited to a subset of possible targets. This provides evidence for the opportunities offered by novel disease-relevant in vitro models that enable identification of novel targets that facilitate interactions between the tumor cells and their surrounding microenvironment. Next, an overview of the models currently reported in literature is provided, and the cancer biology they have been used to explore is highlighted. Finally, four priority areas are suggested for the field to accelerate adoption of in vitro tumour models for cancer drug discovery.

A three-dimensional engineered heterogeneous tumor model for assessing cellular environment and response.

This protocol describes how to build and implement a three-dimensional (3D) cell culture system, TRACER (tissue roll for analysis of cellular environment and response), that enables analysis of cellular behavior and phenotype in hypoxic gradients. TRACER consists of infiltrating cells encapsulated in a hydrogel extracellular matrix (ECM) within a thin strip of porous cellulose scaffolding that is then rolled around an oxygen-impermeable mandrel for assembly of thick and layered 3D tissue constructs that develop cell-defined oxygen gradients. TRACER differs from other stacked-paper cell culture models because it is assembled from a single-piece scaffold, which facilitates rapid disassembly for analysis of different cell populations and metabolites. The protocol describes how to fabricate TRACER components, cell seeding in the scaffold, and scaffold assembly and disassembly. Furthermore, it provides methods to quantify live, dead, or proliferating cells, as well as gradients of oxygen using the nitroimidazole derivative EF5, in a layer-by-layer analysis with confocal microscopy or by flow cytometry of cells isolated from the TRACER scaffold. Additional methods to isolate live cells from TRACER layers for dose-response analysis with a clonogenic assay, as well as steps to extract RNA or fast-changing metabolites from TRACER layers, are also presented. Finally, we provide alternative steps to establish TRACER co-cultures for assessment of tumor cell invasion and metastasis, in this case in the absence of a hypoxic gradient. Although analysis time varies according to the assay chosen, scaffold fabrication and seeding typically take 2 h, and TRACER assembly takes 20 min on the day following scaffold seeding. The TRACER platform is designed for use by researchers and students who have basic tissue culture experience.

A TRACER 3D Co-Culture tumour model for head and neck cancer.

Cancer-associated fibroblasts (CAFs) are a key component of the tumour microenvironment and have been shown to play an important role in the progression of cancer. To probe these tumour-stroma interactions, we incorporated CAFs derived from head and neck cancer patients and squamous carcinoma cells of the hypopharynx (FaDu) into the Tissue Roll for the Analysis of Cellular Environment and Response (TRACER) platform to establish a co-culture platform that simulates the CAF-tumour microenvironmental interactions in head and neck tumours. TRACER culture involves infiltrating cells into a thin fibrous scaffold and then rolling the resulting biocomposite around a mandrel to generate a 3D and layered structure. Patterning the fibrous scaffold biocomposite during fabrication enables control over the specific location of different cell populations in the rolled configuration. Here, we optimized the seeding densities and configurations of the CAF and FaDu cell tissue sections to enable a robust 3D co-culture system under normoxic conditions. Co-culture of CAFs with FaDu cells produced negligible effects on radiation resistance, but did produce increases in proliferation rate and invasive cell migration at 24 and 48 h of culture. Our study provides the basis for use of our in vitro co-culture TRACER model to investigate the tumour-stroma interactions, and to bridge the translational gap between preclinical and clinical studies.

Development of TRACER: tissue roll for analysis of cellular environment and response.

The tumour microenvironment is heterogeneous and consists of multiple cell types, variable extracellular matrix (ECM) composition, and contains cell-defined gradients of small molecules, oxygen, nutrients and waste. Emerging in vitro cell culture systems that attempt to replicate these features often fail to incorporate design strategies to facilitate efficient data collection and stratification. The tissue roll for analysis of cellular environment and response (TRACER) is a novel strategy to assemble layered, three-dimensional tumours with cell-defined, graded heterogeneous microenvironments that also facilitates cellular separation and stratification of data from different cell populations from specific microenvironments. Here we describe the materials selection and development of TRACER. We find that cellulose fibre scaffolding is an ideal support to generate tissue constructs having homogenous cell seeding and consistent properties. We explore ECM remodeling and long-term cell growth in the scaffold, and characterize the tumour microenvironment in assembled TRACERs using multiple established analysis methods. Finally, we confirm that TRACERs replicate small molecule gradients of glucose and lactate, and explore cell phenotype associated with these gradients using confocal microscopy, flow cytometry, and quantitative PCR analysis. We envision this technology will provide a platform to create complex, yet controlled tumour microenvironments that can be easily disassembled for snapshot analysis of cell phenotype and response to therapy in relation to microenvironment properties.

Patterning cellular compartments within TRACER cultures using sacrificial gelatin printing.

In the past decade, it has been well recognised that the tumour microenvironment contains microenvironmental components such as hypoxia that significantly influence tumour cell behaviours such, invasiveness and therapy resistance, all of which provide new targets for studying cancer biology and developing anticancer therapeutics. In response, a large number of two-dimensional and three-dimensional (3D) in vitro tumour models have been developed to recapitulate different aspects of the tumour microenvironment and enable the study of related biological questions. While more complex models enable new biological insight, such models often involve time-consuming and complex fabrication or analysis processes, which limit their adoption by the broader cancer biology community. To address this, we recently reported the development of a new platform that enables easy assembly and analysis of 3D tumour cultures, the tissue roll for analysis of cellular environment response (TRACER). The TRACER platform enables recapitulation of many spatial aspects of the tumour microenvironment to ask a variety of questions, however its original design contains only one cell type. In contrast tumours in vivo often contain a neoplastic and stromal compartment. To expand the types of questions the TRACER system is useful for asking, here we present a strategy to pattern distinct cell type domains into TRACER layers using a custom-built gelatin-dispensing pen. The pen allows deposition of a temporary gelatin barrier into the TRACER scaffold to define domain boundaries between cell populations. The gelatin can be melted away after cell seeding to allow interaction of cell populations from adjacent domains. Our device offers a simple strategy to generate complex multi-cell type tumour cultures for analysis of fundamental biology and drug development applications.