RESUMO
The wealth of complex polar topologies1-10 recently found in nanoscale ferroelectrics results from a delicate balance between the intrinsic tendency of the materials to develop a homogeneous polarization and the electric and mechanical boundary conditions imposed on them. Ferroelectric-dielectric interfaces are model systems in which polarization curling originates from open circuit-like electric boundary conditions, to avoid the build-up of polarization charges through the formation of flux-closure11-14 domains that evolve into vortex-like structures at the nanoscale15-17 level. Although ferroelectricity is known to couple strongly with strain (both homogeneous18 and inhomogeneous19,20), the effect of mechanical constraints21 on thin-film nanoscale ferroelectrics has been comparatively less explored because of the relative paucity of strain patterns that can be implemented experimentally. Here we show that the stacking of freestanding ferroelectric perovskite layers with controlled twist angles provides an opportunity to tailor these topological nanostructures in a way determined by the lateral strain modulation associated with the twisting. Furthermore, we find that a peculiar pattern of polarization vortices and antivortices emerges from the flexoelectric coupling of polarization to strain gradients. This finding provides opportunities to create two-dimensional high-density vortex crystals that would enable us to explore previously unknown physical effects and functionalities.
RESUMO
The normal-state conductivity and superconducting critical temperature of oxygen-deficient YBa_{2}Cu_{3}O_{7-δ} can be persistently enhanced by illumination. Strongly debated for years, the origin of those effects-termed persistent photoconductivity and photosuperconductivity (PPS)-has remained an unsolved critical problem, whose comprehension may provide key insights to harness the origin of high-temperature superconductivity itself. Here, we make essential steps toward understanding PPS. While the models proposed so far assume that it is caused by a carrier-density increase (photodoping) observed concomitantly, our experiments contradict such conventional belief: we demonstrate that it is instead linked to a photo-induced decrease of the electronic scattering rate. Furthermore, we find that the latter effect and photodoping are completely disconnected and originate from different microscopic mechanisms, since they present different wavelength and oxygen-content dependences as well as strikingly different relaxation dynamics. Besides helping disentangle photodoping, persistent photoconductivity, and PPS, our results provide new evidence for the intimate relation between critical temperature and scattering rate, a key ingredient in modern theories on high-temperature superconductivity.
RESUMO
The Josephson effect results from the coupling of two superconductors across a spacer such as an insulator, a normal metal or a ferromagnet to yield a phase coherent quantum state. However, in junctions with ferromagnetic spacers, very long-range Josephson effects have remained elusive. Here we demonstrate extremely long-range (micrometric) high-temperature (tens of kelvins) Josephson coupling across the half-metallic manganite La0.7Sr0.3MnO3 combined with the superconducting cuprate YBa2Cu3O7. These planar junctions, in addition to large critical currents, display the hallmarks of Josephson physics, such as critical current oscillations driven by magnetic flux quantization and quantum phase locking effects under microwave excitation (Shapiro steps). The latter display an anomalous doubling of the Josephson frequency predicted by several theories. In addition to its fundamental interest, the marriage between high-temperature, dissipationless quantum coherent transport and full spin polarization brings opportunities for the practical realization of superconducting spintronics, and opens new perspectives for quantum computing.
RESUMO
The persistence of ferroelectricity in ultrathin layers relies critically on screening or compensation of polarization charges which otherwise destabilize the ferroelectric state. At surfaces, charged defects play a crucial role in the screening mechanism triggering novel mixed electrochemical-ferroelectric states. At interfaces, however, the coupling between ferroelectric and electrochemical states has remained unexplored. Here, we make use of the dynamic formation of the oxygen vacancy profile in the nanometer-thick barrier of a ferroelectric tunnel junction to demonstrate the interplay between electrochemical and ferroelectric degrees of freedom at an oxide interface. We fabricate ferroelectric tunnel junctions with a La_{0.7}Sr_{0.3}MnO_{3} bottom electrode and BaTiO_{3} ferroelectric barrier. We use poling strategies to promote the generation and transport of oxygen vacancies at the metallic top electrode. Generated oxygen vacancies control the stability of the ferroelectric polarization and modify its coercive fields. The ferroelectric polarization, in turn, controls the ionization of oxygen vacancies well above the limits of thermodynamic equilibrium, triggering the build up of a Schottky barrier at the interface which can be turned on and off with ferroelectric switching. This interplay between electronic and electrochemical degrees of freedom yields very large values of the electroresistance (more than 10^{6}% at low temperatures) and enables a controlled switching between clockwise and counterclockwise switching modes in the same junction (and consequently, a change of the sign of the electroresistance). The strong coupling found between electrochemical and electronic degrees of freedom sheds light on the growing debate between resistive and ferroelectric switching in ferroelectric tunnel junctions, and moreover, can be the source of novel concepts in memory devices and neuromorphic computing.
RESUMO
The electronic reconstruction occurring at oxide interfaces may be the source of interesting device concepts for future oxide electronics. Among oxide devices, multiferroic tunnel junctions are being actively investigated as they offer the possibility to modulate the junction current by independently controlling the switching of the magnetization of the electrodes and of the ferroelectric polarization of the barrier. In this Letter, we show that the spin reconstruction at the interfaces of a La_{0.7}Sr_{0.3}MnO_{3}/BaTiO_{3}/La_{0.7}Sr_{0.3}MnO_{3} multiferroic tunnel junction is the origin of a spin filtering functionality that can be turned on and off by reversing the ferroelectric polarization. The ferroelectrically controlled interface spin filter enables a giant electrical modulation of the tunneling magnetoresistance between values of 10% and 1000%, which could inspire device concepts in oxides-based low dissipation spintronics.
RESUMO
Boosting large-scale superconductor applications require nanostructured conductors with artificial pinning centres immobilizing quantized vortices at high temperature and magnetic fields. Here we demonstrate a highly effective mechanism of artificial pinning centres in solution-derived high-temperature superconductor nanocomposites through generation of nanostrained regions where Cooper pair formation is suppressed. The nanostrained regions identified from transmission electron microscopy devise a very high concentration of partial dislocations associated with intergrowths generated between the randomly oriented nanodots and the epitaxial YBa(2)Cu(3)O(7) matrix. Consequently, an outstanding vortex-pinning enhancement correlated to the nanostrain is demonstrated for four types of randomly oriented nanodot, and a unique evolution towards an isotropic vortex-pinning behaviour, even in the effective anisotropy, is achieved as the nanostrain turns isotropic. We suggest a new vortex-pinning mechanism based on the bond-contraction pairing model, where pair formation is quenched under tensile strain, forming new and effective core-pinning regions.
RESUMO
The term tunnel electroresistance (TER) denotes a fast, non-volatile, reversible resistance switching triggered by voltage pulses in ferroelectric tunnel junctions. It is explained by subtle mechanisms connected to the voltage-induced reversal of the ferroelectric polarization. Here we demonstrate that effects functionally indistinguishable from the TER can be produced in a simpler junction scheme-a direct contact between a metal and an oxide-through a different mechanism: a reversible redox reaction that modifies the oxide's ground-state. This is shown in junctions based on a cuprate superconductor, whose ground-state is sensitive to the oxygen stoichiometry and can be tracked in operando via changes in the conductance spectra. Furthermore, we find that electrochemistry is the governing mechanism even if a ferroelectric is placed between the metal and the oxide. Finally, we extend the concept of electroresistance to the tunnelling of superconducting quasiparticles, for which the switching effects are much stronger than for normal electrons. Besides providing crucial understanding, our results provide a basis for non-volatile Josephson memory devices.
RESUMO
The shape of the electric-field-current-density (E-J) curve is determined by flux pinning and also by dynamics of vortices. Here, we propose a novel methodology to study the normalized flux creep rate S in YBa2Cu3O7-δ measured from E-J curves obtained by electrical transport measurements that provides a fast and versatile way to foresee the flux magnetic relaxation in films and disentangle angular flux creep contributions by the scaling of the isotropic contribution of S. After a detailed comparison of various pristine and nanocomposite films with differentiated nanostructures, we focus on the roles that intrinsic pinning and stacking faults (YBa2Cu4O8-intergrowths) play when the magnetic field is applied parallel to the superconducting CuO2 planes. This study reveals that the emerging intergrowths provide advanced pinning properties that additionally reduce the thermal activated flux magnetic relaxation. For this purpose, creep analysis becomes a very appropriate tool to elucidate the dominance of the different pinning sites at different regions of the magnetic-field-temperature diagram.
RESUMO
A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.
RESUMO
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC) - ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors.
RESUMO
Since the discovery of high-temperature superconductors (HTSs), most efforts of researchers have been focused on the fabrication of superconducting devices capable of immobilizing vortices, hence of operating at enhanced temperatures and magnetic fields. Recent findings that geometric restrictions may induce self-arresting hypervortices recovering the dissipation-free state at high fields and temperatures made superconducting strips a mainstream of superconductivity studies. Here we report on the geometrical melting of the vortex lattice in a wide YBCO submicron bridge preceded by magnetoresistance (MR) oscillations fingerprinting the underlying regular vortex structure. Combined magnetoresistance measurements and numerical simulations unambiguously relate the resistance oscillations to the penetration of vortex rows with intermediate geometrical pinning and uncover the details of geometrical melting. Our findings offer a reliable and reproducible pathway for controlling vortices in geometrically restricted nanodevices and introduce a novel technique of geometrical spectroscopy, inferring detailed information of the structure of the vortex system through a combined use of MR curves and large-scale simulations.