Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 56
Filtrar
1.
Beilstein J Org Chem ; 19: 1912-1922, 2023.
Artigo em Inglês | MEDLINE | ID: mdl-38116245

RESUMO

2,2'-Bis(4-dimethylaminophenyl)- and 2,2'-dicyclohexyl-1,1',3,3'-tetramethyl-2,2',3,3'-tetrahydro-2,2'-bibenzo[d]imidazole ((N-DMBI)2 and (Cyc-DMBI)2) are quite strong reductants with effective potentials of ca. -2 V vs ferrocenium/ferrocene, yet are relatively stable to air due to the coupling of redox and bond-breaking processes. Here, we examine their use in accomplishing electron transfer-induced bond-cleavage reactions, specifically dehalogenations. The dimers reduce halides that have reduction potentials less cathodic than ca. -2 V vs ferrocenium/ferrocene, especially under UV photoexcitation (using a 365 nm LED). In the case of benzyl halides, the products are bibenzyl derivatives, whereas aryl halides are reduced to the corresponding arenes. The potentials of the halides that can be reduced in this way, quantum-chemical calculations, and steady-state and transient absorption spectroscopy suggest that UV irradiation accelerates the reactions via cleavage of the dimers to the corresponding radical monomers.

2.
J Am Chem Soc ; 143(33): 13034-13043, 2021 08 25.
Artigo em Inglês | MEDLINE | ID: mdl-34378919

RESUMO

Upon photoinitiated electron transfer, charge recombination limits the quantum yield of photoredox reactions for which the rates for the forward reaction and back electron transfer are competitive. Taking inspiration from a proton-coupled electron transfer (PCET) process in Photosystem II, a benzimidazole-phenol (BIP) has been covalently attached to the 2,2'-bipyridyl ligand of [Ir(dF(CF3)ppy)2(bpy)][PF6] (dF(CF3)ppy = 2-(2,4-difluorophenyl)-5-(trifluoromethyl)pyridine; bpy = 2,2'-bipyridyl). Excitation of the [Ir(dF(CF3)ppy)2(BIP-bpy)][PF6] photocatalyst results in intramolecular PCET to form a charge-separated state with oxidized BIP. Subsequent reduction of methyl viologen dication (MV2+), a substrate surrogate, by the reducing moiety of the charge separated species demonstrates that the inclusion of BIP significantly slows the charge recombination rate. The effect of ∼24-fold slower charge recombination in a photocatalytic phthalimide ester reduction resulted in a greater than 2-fold increase in reaction quantum efficiency.

3.
J Am Chem Soc ; 141(47): 18806-18813, 2019 Nov 27.
Artigo em Inglês | MEDLINE | ID: mdl-31613619

RESUMO

A fused donor, thienobenzo[b]indacenodithiophene (TBIDT), was designed and synthesized using a novel acid-promoted cascade ring closure strategy, and then copolymerized with a benzothiadiazole (BT) monomer. The backbone of TBIDT is an expansion of the well-known indacenodithiophene (IDT) unit and was expected to enhance the charge carrier mobility by improving backbone planarity and facilitating short contacts between polymer chains. However, the optimized field-effect transistors demonstrated an average saturation hole mobility of 0.9 cm2 V-1 s-1, lower than the performance of IDT-BT (∼1.5 cm2 V-1 s-1). Mobilities extracted from time-resolved microwave conductivity measurements were consistent with the trend in hole mobilities in organic field-effect transistor devices. Scanning tunneling microscopy measurements and computational modeling illustrated that TBIDT-BT exhibits a less ordered microstructure in comparison to IDT-BT. This reveals that a regular side-chain packing density, independent of conformational isomers, is critical to avoid local free volume due to irregular packing, which can host trapping impurities. DFT calculations indicated that TBIDT-BT, despite containing a larger, planar unit, showed less stabilization of planar backbone geometries in comparison to IDT-BT. This is due to the reduced electrostatic stabilizing interactions between the peripheral thiophene of the fused core and the BT unit, resulting in a reduction of the barrier to rotation around the single bond. These insights provide a greater understanding of the general structure-property relationships required for semiconducting polymer repeat units to ensure optimal backbone planarization, as illustrated with IDT-type units, guiding the design of novel semiconducting polymers with extended fused backbones for high-performance field-effect transistors.

4.
J Am Chem Soc ; 140(33): 10488-10496, 2018 08 22.
Artigo em Inglês | MEDLINE | ID: mdl-30040404

RESUMO

Molecular assemblies in metal-organic frameworks (MOFs) are reminiscent of natural light-harvesting (LH) systems and considered as emerging materials for energy conversion. Such applications require understanding the correlation between their excited-state properties and underlying topological net. Two chemically identical but topologically different tetraphenylpyrene (1,3,6,8-tetrakis( p-benzoicacid)pyrene; H4TBAPy)-based ZrIV MOFs, NU-901 ( scu) and NU-1000 ( csq), are chosen to computationally and spectroscopically interrogate the impact of topological difference on their excited-state electronic structures. Time-dependent density functional theory-computed transition density matrices for selected model compounds reveal that the optically relevant S1, S2, and S n states are delocalized over more than four TBAPy linkers with a maximum exciton size of ∼1.7 nm (i.e., two neighboring TBAPy linkers). Computational data further suggests the evolution of polar excitons (hole and electron residing in two different linkers); their oscillator strengths vary with the extent of interchromophoric interaction depending on their topological network. Femtosecond transient absorption (fs-TA) spectroscopic data of NU-901 highlight instantaneous spectral evolution of an intense S1 → S n transition at 750 nm, which diminishes with the emergence of a broad (580-1100 nm) induced absorption originating from a fast excimer formation. Although these ultrafast spectroscopic data reveal the first direct spectral observation of fast excimer formation (τ = 2 ps) in MOFs, the fs-TA features seen in NU-901 are clearly absent in NU-1000 and the free H4TBAPy linker. Furthermore, transient and steady-state fluorescence data collected as a function of solvent dielectrics reveal that the emissive states in both MOF samples are electronically nonpolar; however, low-lying polar excited states may get involved in the excited-state decay processes in polar solvents. The present work shows that the topological arrangement of the linkers critically controls the excited-state electronic structures.

5.
J Am Chem Soc ; 139(12): 4286-4289, 2017 03 29.
Artigo em Inglês | MEDLINE | ID: mdl-28287707

RESUMO

Ultrafast photoinduced electron transfer (PIET) dynamics of a C70-encapsulated bisporphyrin covalent organic polyhedron hybrid (C70@COP-5) is studied in a nonpolar toluene medium with fluorescence and transient absorption spectroscopies. This structurally rigid donor (D)-acceptor (A) molecular hybrid offers a new platform featuring conformationally predetermined cofacial D-A orientation with a fixed edge-to-edge separation, REE (2.8 Å), without the aid of covalent bonds. Sub-picosecond PIET (τET ≤ 0.4 ps) and very slow charge recombination (τCR ≈ 600 ps) dynamics are observed. The origin of these dynamics is discussed in terms of enhanced D-A coupling (V = 675 cm-1) and extremely small reorganization energy (λ ≈ 0.18 eV), induced by the intrinsic structural rigidity of the C70@COP-5 complex.

6.
Phys Chem Chem Phys ; 18(33): 22937-45, 2016 Aug 17.
Artigo em Inglês | MEDLINE | ID: mdl-27485768

RESUMO

We report on electronically excited-state dynamics of three different trifluoromethyl C60 fullerenes (TMFs, C60(CF3)n: C60/4-1, C60/6-2, and C60/10-1, featuring four, six, and ten trifluoromethyl groups, respectively) using steady-state and time-resolved optical spectroscopy as well as ultrafast pump/probe transient absorption spectroscopy. C60/4-1 and C60/6-2 dissolved in toluene solvent show near-unity S1 → T1 intersystem crossing quantum yield (ΦISC), ca. 1 ns S1-state lifetimes, and microsecond-timescale T1-state lifetimes, which are typical of the fullerene class. On the other hand, C60/10-1 exhibits a dominant sub-nanosecond nonradiative S1 → S0 relaxation mechanism and negligible ΦISC, therefore decreasing the average excited-state lifetime (τavg) by about 5 orders of magnitude compared to that of C60/4-1 and C60/6-2 (τavg ≈ 17 µs and 54 µs for C60/4-1 and C60/6-2, respectively, whereas τavg ≈ 100 ps for C60/10-1). These excited-state characteristics of C60/4-1 and C60/6-2 are preserved in polymer matrix, suggesting that fullerene/polymer interactions do not modulate intrinsic photophysics of trifluoromethyl-substituted fullerenes. The contrasting excited-state study results of C60/4-1 and C60/6-2 to that of C60/10-1 infer that intrinsic optical properties and excited-state dynamics can be affected by the substitution on the fullerene.

7.
J Phys Chem A ; 119(17): 4009-16, 2015 Apr 30.
Artigo em Inglês | MEDLINE | ID: mdl-25793313

RESUMO

A combination of molecular quantum electrodynamics, perturbation theory, and ab initio calculations was used to create a computational methodology capable of estimating the rate of three-body singlet upconversion in organic molecular assemblies. The approach was applied to quantify the conditions under which such relaxation rates, known as energy pooling, become meaningful for two test systems, stilbene-fluorescein and hexabenzocoronene-oligothiophene. Both exhibit low intramolecular conversion, but intermolecular configurations exist in which pooling efficiency is at least 90% when placed in competition with more conventional relaxation pathways. For stilbene-fluorescein, the results are consistent with data generated in an earlier experimental investigation. Exercising these model systems facilitated the development of a set of design rules for the optimization of energy pooling.

8.
Nat Mater ; 12(7): 628-33, 2013 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-23727949

RESUMO

Additives, including nucleating agents, have been used to regulate the solidification process of (semi-)crystalline polymer solids and thus control both their crystallite dimensions and shape. Here, we demonstrate that minute amounts (0.1-1 wt%) of commercially available nucleating agents can be used to efficiently manipulate the solidification kinetics of a wide range of organic semiconductors--including poly(3-alkylthiophene)s, the fullerene derivative [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) and 6,13-bis(triisopropyl-silylethynyl) (TIPS) pentacene--when processed from the melt, solution or solid state, without adversely affecting the semiconductors' electronic properties. Heterogeneous nucleation increases the temperature of and rate of crystallization of poly(3-alkylthiophene)s, permits patterning of crystallites at pre-defined locations in PCBM, and minimizes dewetting of films of TIPS-pentacene formed by inkjet printing. Nucleating agents thus make possible the fabrication of thin-film transistors with uniform electrical characteristics at high yield.

9.
ACS Energy Lett ; 9(3): 896-907, 2024 Mar 08.
Artigo em Inglês | MEDLINE | ID: mdl-38482181

RESUMO

Energy transfer across the donor-acceptor interface in organic photovoltaics is usually beneficial to device performance, as it assists energy transport to the site of free charge generation. Here, we present a case where the opposite is true: dilute donor molecules in an acceptor host matrix exhibit ultrafast excitation energy transfer (EET) to the host, which suppresses the free charge yield. We observe an optimal photochemical driving force for free charge generation, as detected via time-resolved microwave conductivity (TRMC), but with a low yield when the sensitizer is excited. Meanwhile, transient absorption shows that transferred excitons efficiently produce charge-transfer states. This behavior is well described by a competition for the excited state between long-range electron transfer that produces free charge and EET that ultimately produces only localized charge-transfer states. It cannot be explained if the most localized CT states are the intermediate between excitons and the free charge in this system.

10.
Nano Lett ; 12(3): 1398-403, 2012 Mar 14.
Artigo em Inglês | MEDLINE | ID: mdl-22313425

RESUMO

A detailed knowledge of the manifold of both bright and dark excitons in single-walled carbon nanotubes (SWCNTs) is critical to understanding radiative and nonradiative recombination processes. Exciton-phonon coupling opens up additional absorption and emission channels, some of which may "brighten" the sidebands of optically forbidden (dark) excitonic transitions in optical spectra. In this report, we compare (12)C and (13)C-labeled SWCNTs that are highly enriched in the (6,5) species to identify both absorptive and emissive vibronic transitions. We find two vibronic sidebands near the bright (1)E(11) singlet exciton, one absorptive sideband ~200 meV above, and one emissive sideband ~140 meV below, the bright singlet exciton. Both sidebands demonstrate a ~50 cm(-1) isotope-induced shift, which is commensurate with exciton-phonon coupling involving phonons of A[Formula: see text] symmetry (D band, ω ~ 1330 cm(-1)). Independent analysis of each sideband indicates that both sidebands arise from the same dark exciton level, which lies at an energy approximately 25 meV above the bright singlet exciton. Our observations support the recent prediction of, and mounting experimental evidence for, the dark K-momentum singlet exciton lying ~25 meV (for the (6,5) SWCNT) above the bright Γ-momentum singlet. This study represents the first use of (13)C-labeled SWCNTs highly enriched in a single nanotube species to unequivocally confirm these sidebands as vibronic sidebands of the dark K-momentum singlet exciton.


Assuntos
Modelos Químicos , Modelos Moleculares , Nanotubos de Carbono/química , Nanotubos de Carbono/ultraestrutura , Radioisótopos de Carbono/química , Simulação por Computador , Tamanho da Partícula , Vibração
11.
Adv Mater ; : e2210481, 2023 Mar 27.
Artigo em Inglês | MEDLINE | ID: mdl-36972554

RESUMO

Time-resolved microwave conductivity is used to compare aqueous-soluble organic nanoparticle photocatalysts and bulk thin films composed of the same mixture of semiconducting polymer and non-fullerene acceptor molecule and the relationship between composition, interfacial surface area, charge-carrier dynamics, and photocatalytic activity is examined. The rate of hydrogen evolution reaction by nanoparticles composed of various donor:acceptor blend ratio compositions is quantitatively measured, and it is found that the most active blend ratio displays a hydrogen quantum yield of 0.83% per photon. Moreover, it is found that nanoparticle photocatalytic activity corresponds directly to charge generation, and that nanoparticles have 3× more long-lived accumulated charges relative to bulk samples of the same material composition. These results suggest that, under the current reaction conditions, with ≈3× solar flux, catalytic activity by the nanoparticles is limited by the concentration of electrons and holes in operando and not a finite number of active surface sites or the catalytic rate at the interface. This provides a clear design goal for the next generation of efficient photocatalytic nanoparticles.

12.
ACS Appl Mater Interfaces ; 15(23): 28228-28239, 2023 Jun 14.
Artigo em Inglês | MEDLINE | ID: mdl-37256818

RESUMO

Solar energy conversion requires the working compositions to generate photoinduced charges with high potential and the ability to deliver charges to the catalytic sites and/or external electrode. These two properties are typically at odds with each other and call for new molecular materials with sufficient conjugation to improve charge conductivity but not as much conjugation as to overly compromise the optical band gap. In this work, we developed a semiconducting metal-organic framework (MOF) prepared explicitly through metal-carbodithioate "(-CS2)nM" linkage chemistry, entailing augmented metal-linker electronic communication. The stronger ligand field and higher covalent character of metal-carbodithioate linkages─when combined with spirofluorene-derived organic struts and nickel(II) ion-based nodes─provided a stable, semiconducting 3D-porous MOF, Spiro-CS2Ni. This MOF lacks long-range ordering and is defined by a flexible structure with non-aggregated building units, as suggested by reverse Monte Carlo simulations of the pair distribution function obtained from total scattering experiments. The solvent-removed "closed pore" material recorded a Brunauer-Emmett-Teller area of ∼400 m2/g, where the "open pore" form possesses 90 wt % solvent-accessible porosity. Electrochemical measurements suggest that Spiro-CS2Ni possesses a band gap of 1.57 eV (σ = 10-7 S/cm at -1.3 V bias potential), which can be further improved by manipulating the d-electron configuration through an axial coordination (ligand/substrate), the latter of which indicates usefulness as an electrocatalyst and/or a photoelectrocatalyst (upon substrate binding). Transient-absorption spectroscopy reveals a long-lived photo-generated charge-transfer state (τCR = 6.5 µs) capable of chemical transformation under a biased voltage. Spiro-CS2Ni can endure a compelling range of pH (1-12 for weeks) and hours of electrochemical and photoelectrochemical conditions in the presence of water and organic acids. We believe this work provides crucial design principles for low-density, porous, light-energy-conversion materials.

13.
Mater Horiz ; 9(1): 312-324, 2022 Jan 04.
Artigo em Inglês | MEDLINE | ID: mdl-34787147

RESUMO

Understanding how Frenkel excitons efficiently split to form free-charges in low-dielectric constant organic semiconductors has proven challenging, with many different models proposed in recent years to explain this phenomenon. Here, we present evidence that a simple model invoking a modest amount of charge delocalization, a sum over the available microstates, and the Marcus rate constant for electron transfer can explain many seemingly contradictory phenomena reported in the literature. We use an electron-accepting fullerene host matrix dilutely sensitized with a series of electron donor molecules to test this hypothesis. The donor series enables us to tune the driving force for photoinduced electron transfer over a range of 0.7 eV, mapping out normal, optimal, and inverted regimes for free-charge generation efficiency, as measured by time-resolved microwave conductivity. However, the photoluminescence of the donor is rapidly quenched as the driving force increases, with no evidence for inverted behavior, nor the linear relationship between photoluminescence quenching and charge-generation efficiency one would expect in the absence of additional competing loss pathways. This behavior is self-consistently explained by competitive formation of bound charge-transfer states and long-range or delocalized free-charge states, where both rate constants are described by the Marcus rate equation. Moreover, the model predicts a suppression of the inverted regime for high-concentration blends and efficient ultrafast free-charge generation, providing a mechanistic explanation for why Marcus-inverted-behavior is rarely observed in device studies.

14.
Adv Mater ; 34(22): e2101932, 2022 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-34850459

RESUMO

2D polymers (2DPs) are promising as structurally well-defined, permanently porous, organic semiconductors. However, 2DPs are nearly always isolated as closed shell organic species with limited charge carriers, which leads to low bulk conductivities. Here, the bulk conductivity of two naphthalene diimide (NDI)-containing 2DP semiconductors is enhanced by controllably n-doping the NDI units using cobaltocene (CoCp2 ). Optical and transient microwave spectroscopy reveal that both as-prepared NDI-containing 2DPs are semiconducting with sub-2 eV optical bandgaps and photoexcited charge-carrier lifetimes of tens of nanoseconds. Following reduction with CoCp2 , both 2DPs largely retain their periodic structures and exhibit optical and electron-spin resonance spectroscopic features consistent with the presence of NDI-radical anions. While the native NDI-based 2DPs are electronically insulating, maximum bulk conductivities of >10-4  S cm-1 are achieved by substoichiometric levels of n-doping. Density functional theory calculations show that the strongest electronic couplings in these 2DPs exist in the out-of-plane (π-stacking) crystallographic directions, which indicates that cross-plane electronic transport through NDI stacks is primarily responsible for the observed electronic conductivity. Taken together, the controlled molecular doping is a useful approach to access structurally well-defined, paramagnetic, 2DP n-type semiconductors with measurable bulk electronic conductivities of interest for electronic or spintronic devices.

15.
Nano Lett ; 10(1): 239-42, 2010 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-20000623

RESUMO

We report the fabrication and measurement of solar cells approaching a power conversion efficiency of 3.2% using a low band gap conjugated polymer poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] and CdSe nanoparticles. These devices exhibit an external quantum efficiency (EQE) of >30% in a broad range of 350-800 nm with a maximum EQE of 55% in a range of 630-720 nm. We also present certified device efficiencies of 3.13% under AM 1.5 illumination.

16.
Nano Lett ; 10(11): 4627-33, 2010 Nov 10.
Artigo em Inglês | MEDLINE | ID: mdl-20939586

RESUMO

Single-walled carbon nanotubes (SWNTs) have potential as electron acceptors in organic photovoltaics (OPVs), but the currently low-power conversion efficiencies of devices remain largely unexplained. We demonstrate effective redispersion of isolated, highly enriched semiconducting and metallic SWNTs into poly(3-hexylthiophene) (P3HT). We use these enriched blends to provide the first experimental evidence of the negative impact of metallic nanotubes. Time-resolved microwave conductivity reveals that the long-lived carrier population can be significantly increased by incorporating highly enriched semiconducting SWNTs into semiconducting polymer composites.


Assuntos
Nanotubos de Carbono/química , Nanotubos de Carbono/ultraestrutura , Compostos Organosselênicos/química , Semicondutores , Condutividade Elétrica , Transporte de Elétrons , Desenho de Equipamento , Análise de Falha de Equipamento , Teste de Materiais
17.
J Am Chem Soc ; 132(28): 9672-80, 2010 Jul 21.
Artigo em Inglês | MEDLINE | ID: mdl-20583755

RESUMO

We present a study of the self-assembly, charge-transfer kinetics, and catalytic properties of hybrid complexes of CdTe nanocrystals (nc-CdTe) and Clostridium acetobutylicum [FeFe]-hydrogenase I (H(2)ase). Molecular assembly of nc-CdTe and H(2)ase was mediated by electrostatic interactions and resulted in stable, enzymatically active complexes. The assembly kinetics was monitored by nc-CdTe photoluminescence (PL) spectroscopy and exhibited first-order Langmuir adsorption behavior. PL was also used to monitor the transfer of photogenerated electrons from nc-CdTe to H(2)ase. The extent to which the intramolecular electron transfer (ET) contributed to the relaxation of photoexcited nc-CdTe relative to the intrinsic radiative and nonradiative (heat dissipation and surface trapping) recombination pathways was shown by steady-state PL spectroscopy to be a function of the nc-CdTe/H(2)ase molar ratio. When the H(2)ase concentration was lower than the nc-CdTe concentration during assembly, the resulting contribution of ET to PL bleaching was enhanced, which resulted in maximal rates of H(2) photoproduction. Photoproduction of H(2) was also a function of the nc-CdTe PL quantum efficiency (PLQE), with higher-PLQE nanocrystals producing higher levels of H(2), suggesting that photogenerated electrons are transferred to H(2)ase directly from core nanocrystal states rather than from surface-trap states. The duration of H(2) photoproduction was limited by the stability of nc-CdTe under the reactions conditions. A first approach to optimization with ascorbic acid present as a sacrificial donor resulted in photon-to-H(2) efficiencies of 9% under monochromatic light and 1.8% under AM 1.5 white light. In summary, nc-CdTe and H(2)ase spontaneously assemble into complexes that upon illumination transfer photogenerated electrons from core nc-CdTe states to H(2)ase, with low H(2)ase coverages promoting optimal orientations for intramolecular ET and solar H(2) production.


Assuntos
Compostos de Cádmio/metabolismo , Hidrogênio/metabolismo , Hidrogenase/metabolismo , Proteínas Ferro-Enxofre/metabolismo , Nanopartículas , Energia Solar , Telúrio/metabolismo , Adsorção , Clostridium acetobutylicum/enzimologia , Modelos Moleculares
18.
J Phys Chem B ; 124(49): 11236-11249, 2020 12 10.
Artigo em Inglês | MEDLINE | ID: mdl-33231450

RESUMO

The development of non-natural photoenzymatic systems has reinvigorated the study of photoinduced electron transfer (ET) within protein active sites, providing new and unique platforms for understanding how biological environments affect photochemical processes. In this work, we use ultrafast spectroscopy to compare the photoinduced electron transfer in known photoenzymes. 12-Oxophytodienoate reductase 1 (OPR1) is compared to Old Yellow Enzyme 1 (OYE1) and morphinone reductase (MR). The latter enzymes are structurally homologous to OPR1. We find that slight differences in the amino acid composition of the active sites of these proteins determine their distinct electron-transfer dynamics. Our work suggests that the inside of a protein active site is a complex/heterogeneous dielectric network where genetically programmed heterogeneity near the site of biological ET can significantly affect the presence and lifetime of various intermediate states. Our work motivates additional tunability of Old Yellow Enzyme active-site reorganization energy and electron-transfer energetics that could be leveraged for photoenzymatic redox approaches.


Assuntos
NADPH Desidrogenase , Domínio Catalítico , Transporte de Elétrons , Oxirredução
19.
Nat Commun ; 11(1): 5234, 2020 Oct 16.
Artigo em Inglês | MEDLINE | ID: mdl-33067460

RESUMO

Metal halide perovskites feature crystalline-like electronic band structures and liquid-like physical properties. The crystal-liquid duality enables optoelectronic devices with unprecedented performance and a unique opportunity to chemically manipulate the structure with low energy input. In this work, we leverage the low formation energy of metal halide perovskites to demonstrate multicolor reversible chromism. We synthesized layered Ruddlesden-Popper FAn+1PbnX3n+1 (FA = formamidinium, X = I, Br; n = number of layers = 1, 2, 3 … ∞) and reversibly tune the dimensionality (n) by modulating the strength and number of H-bonds in the system. H-bonding was controlled by exposure to solvent vapor (solvatochromism) or temperature change (thermochromism), which shuttles FAX salt pairs between the FAn+1PbnX3n+1 domains and adjacent FAX "reservoir" domains. Unlike traditional chromic materials that only offer a single-color transition, FAn+1PbnX3n+1 films reversibly switch between multiple colors including yellow, orange, red, brown, and white/colorless. Each colored phase exhibits distinct optoelectronic properties characteristic of 2D superlattice materials with tunable quantum well thickness.

20.
J Phys Chem Lett ; 11(1): 99-107, 2020 Jan 02.
Artigo em Inglês | MEDLINE | ID: mdl-31790587

RESUMO

Photoinduced generation of mobile charge carriers is the fundamental process underlying many applications, such as solar energy harvesting, solar fuel production, and efficient photodetectors. Monolayer transition-metal dichalcogenides (TMDCs) are an attractive model system for studying photoinduced carrier generation mechanisms in low-dimensional materials because they possess strong direct band gap absorption, large exciton binding energies, and are only a few atoms thick. While a number of studies have observed charge generation in neat TMDCs for photoexcitation at, above, or even below the optical band gap, the role of nonlinear processes (resulting from high photon fluences), defect states, excess charges, and layer interactions remains unclear. In this study, we introduce steady-state microwave conductivity (SSMC) spectroscopy for measuring charge generation action spectra in a model WS2 mono- to few-layer TMDC system at fluences that coincide with the terrestrial solar flux. Despite utilizing photon fluences well below those used in previous pump-probe measurements, the SSMC technique is sensitive enough to easily resolve the photoconductivity spectrum arising in mono- to few-layer WS2. By correlating SSMC with other spectroscopy and microscopy experiments, we find that photoconductivity is observed predominantly for excitation wavelengths resonant with the excitonic transition of the multilayer portions of the sample, the density of which can be controlled by the synthesis conditions. These results highlight the potential of layer engineering as a route toward achieving high yields of photoinduced charge carriers in neat TMDCs, with implications for a broad range of optoelectronic applications.

SELEÇÃO DE REFERÊNCIAS
Detalhe da pesquisa