Delivery of a hydrophobic phthalocyanine photosensitizer using PEGylated gold nanoparticle conjugates for the in vivo photodynamic therapy of amelanotic melanoma.

Photodynamic therapy (PDT) is a treatment of cancer whereby tumours are destroyed by reactive oxygen species generated upon photoactivation of a photosensitizer drug. Hydrophobic photosensitizers are known to be ideal for PDT; however, their hydrophobicity necessitates that they are typically administered using emulsions. Here, a delivery vehicle for photodynamic therapy based on the co-self-assembly of both a Zn(ii)-phthalocyanine derivative photosensitizer and a polyethylene glycol (PEG) derivative onto gold nanoparticles is reported. The PEG on the particle surface ensured that the conjugates were water soluble and enhanced their retention in the serum, improving the efficiency of PDT in vivo. The pharmacokinetic behaviour of the nanoparticle conjugates following intravenous injection into C57/BL6 mice bearing a subcutaneous transplanted B78H1 amelanotic melanoma showed a significant increase of retention of the nanoparticles in the tumour. PDT tumour destruction was achieved 3 h following injection of the nanoparticle conjugates leading to a remarkable 40% of the treated mice showing no tumour regrowth and complete survival. These results highlight that dual functionalised nanoparticles exhibit significant potential in PDT of cancer especially for difficult to treat cancers such as amelanotic melanoma.

Detection of mSiglec-E, in solution and expressed on the surface of Chinese hamster ovary cells, using sialic acid functionalised gold nanoparticles.

Sialic acids are widespread in biology, fulfilling a wide range of functions. Their cognate lectin receptors - Siglecs - are equally diverse and widely distributed, with different Siglecs found within distinct populations of cells in the haemopoietic, immune and nervous systems. A convenient way to assay ligand recognition of soluble Siglecs would be useful, as would methods for the concomitant assessment of Siglec distribution on cell surfaces. Here we report the use of gold nanoparticles functionalised with a sialic acid ligand diluted with a polyethylene glycol (PEG) ligand for the plasmonic detection of a soluble form of murine Siglec-E (mSiglec-E-Fc fusion protein) and, importantly, for the specific detection of the same Siglec expressed on the surface of mammalian cells. These sialic acid functionalised nanoparticles are shown to overcome problems such as cellular cis interactions and low Siglec-ligand affinity. The gold nanoparticles were functionalised with various ratios of sialic acid : PEG ligands and the optimum ratio for the detection of murine Siglec-E was established based on the plasmonic detection of the soluble pre-complexed recombinant form of murine Siglec-E (mSiglec-E-Fc fusion protein). The optimum ratio for the detection of the fusion protein was found to be sialic acid : PEG ligands in a 50 : 50 ratio (glyconanoparticles 1). The optimised glyconanoparticles 1 were used to recognise and bind to the murine Siglec-E expressed on the surface of transfected Chinese hamster ovary cells as determined by transmission electron microscopy.

Glyconanoparticles for colorimetric bioassays.

Carbohydrate molecules are involved in many of the cellular processes that are important for life. By combining the specific analyte targeting of carbohydrates with the multivalent structure and change of solution colour as a consequence of plasmonic interactions with the aggregation of metal nanoparticles, glyconanoparticles have been used extensively for the development of bioanalytical assays. The noble metals used to create the nanocore, the methodologies used to assemble the carbohydrates on the nanoparticle surface, the carbohydrate chosen for each specific target, the length of the tether that separates the carbohydrate from the nanocore and the density of carbohydrates on the surface all impact on the structural formation of metal based glyconanoparticles. This tutorial review highlights these key components, which directly impact on the selectivity and sensitivity of the developed bioassay, for the colorimetric detection of lectins, toxins and viruses.

Porphyrin-silica microparticle conjugates as an efficient tool for the photosensitised disinfection of water contaminated by bacterial pathogens.

A tetracationic meso-substituted amphiphilic porphyrin (abbreviated as C14) was encapsulated within silica microparticles to yield a conjugate with a mean particle diameter of ca. 0.9 µm. The conjugate displayed a complete stability for at least 3 months when suspended in a neutral aqueous medium. The encapsulated C14 underwent a limited photobleaching when the conjugate was exposed to full spectrum visible light. Illumination of the silica microparticle-bound C14 by visible light resulted in the generation of singlet oxygen and induced a decrease in the survival of 4 log for a 20 min irradiation of the Gram-positive bacterium meticillin-resistant Staphylococcus aureus (MRSA) and a 30 min irradiation of the Gram-negative bacterium Escherichia coli (E. coli). Under identical experimental conditions photoexcited free C14 caused a decrease in viability of 5 log for MRSA and 6 log for E. coli. When the conjugate loaded with 12 µM C14 was added to a water sample contaminated with MRSA (10(8) cells per ml) a tight association of the bacterial cells with the silica microparticle-porphyrin system was achieved. Subsequent illumination of the conjugate with visible light (30 min, 100 mW cm(-2)) caused a 3 log reduction in the population of MRSA cells in the water sample. Importantly, the conjugate was readily recovered by filtration of the aqueous suspension and shown to maintain a high antibacterial photoactivity when introduced into a new MRSA-contaminated medium and irradiated.

Colorimetric detection of Ricinus communis Agglutinin 120 using optimally presented carbohydrate-stabilised gold nanoparticles.

Ricin is a toxic lectin which presents a potential security threat. Its rapid detection is highly desirable. Here we present a colorimetric bioassay based on the aggregation of carbohydrate-stabilised gold nanoparticles which has been used to detect Ricinus communis Agglutinin 120 (RCA(120)) - a ricin surrogate. To achieve a stable and robust sensing system the anchor chain length and the density of the assembled carbohydrates on the gold particle surface has been examined to determine the optimal coverage for maximal aggregation with both RCA(120) and Concanavalin A (Con A) lectins. Gold nanoparticles were stabilised with either a thiolated galactose derivative (9-mercapto-3,6-diaoxaoctyl-beta-d-galactoside) or a thiolated mannose derivative (9-merapto-3,6-dioxaoctyl-alpha-d-mannoside), for RCA(120) and Con A respectively, diluted in each instance with varying ratios of a thiolated triethylene glycol derivative. Aggregation was induced with the respective cognate lectin with the reaction monitored by UV-visible spectrophotometry. The results obtained show that a particle surface with at least 7.5% galactose is required for aggregation with RCA(120) and 6% mannose coverage is required for aggregation with Con A. For each lectin the sensitivity of the assay could be controlled by adjustment of the carbohydrate density on the gold nanoparticles, but with differing results. Maximal aggregation with Con A was achieved with a monolayer consisting of 100% mannose, whereas for RCA(120) maximal aggregation occurred with 70% coverage of galactose. The limit of detection for RCA(120) using the optimally presented galactose-stabilised nanoparticles was 9 nM.

Glyconanoparticles for the colorimetric detection of cholera toxin.

Cholera continues to represent a major threat to human health, particularly in developing countries. Death can be readily avoided when medical treatment is rapidly administered. In order to provide a means of detecting the bacterially secreted toxin, we have developed a simple, yet rapid, bioassay for the cholera toxin. The colorimetric bioassay is based on a specifically synthesized lactose derivative that is self-assembled onto gold nanoparticles of 16 nm diameter. In solution the lactose-stabilized nanoparticles are red in color due to the intense surface plasmon absorption band centered at 524 nm. Cholera toxin (added as the B-subunit) (CTB) binds to the lactose derivative and induces aggregation of the nanoparticles. Upon aggregation, the surface plasmon absorption band broadens and red shifts such that the nanoparticle solution appears a deep purple color. The selectivity of the bioassay stems from the thiolated lactose derivative that mimics the GM(1) ganglioside--the receptor to which cholera toxin binds in the small intestine. Consequently, added metal ions, anions, and a protein, at relevant concentrations, do not induce nonspecific aggregation of the nanoparticles. The simple color change of the bioassay provides a selective means to detect and quantify the cholera toxin within 10 min. The theoretical limit of detection of the bioassay was determined to be 54 nM (3 microg/mL) for CTB. The stability of the lactose-stabilized nanoparticles was established by freeze-drying and then resuspending the particles in water and subsequently measuring CTB in biologically relevant electrolyte solutions. This colorimetric bioassay provides a new tool for the direct measurement of cholera toxin.

Silver and gold glyconanoparticles for colorimetric bioassays.

The color changes associated with the aggregation of metal nanoparticles has led to the development of colorimetric-based assays for a variety of target species. We have examined both silver- and gold-based nanoparticles in order to establish whether either metal exhibits optimal characteristics for bioassay development. These silver and gold nanoparticles have been stabilized with a self-assembled monolayer of a mannose derivative (2-mercaptoethyl alpha-d-mannopyranoside) with the aim of inducing aggregation by exploiting the well-known interaction between mannose and the lectin Concanavalin A (Con A). Both metal glyconanoparticles were determined to be ca. 16 nm in diameter (using TEM measurements). Aggregation was observed on addition of Con A to both silver and gold nanoparticles resulting in a shift in the surface plasmon absorption band and a consequent color change of the solution, which was monitored using UV-visible spectrophotometry. Mannose-stabilized silver nanoparticles at a concentration of 3 nM provide an assay for Con A with the largest linear range (between 0.08 and 0.26 microM). Additionally, the kinetic rate of aggregation of the silver-nanoparticle-based bioassay was significantly greater than that of the gold-nanoparticle system. However, in terms of sensitivity, the mannose-stabilized gold-nanoparticle-based assay was optimum with a limit of detection of 0.04 microM Con A, as compared with a value of 0.1 microM obtained for the mannose-stabilized silver nanoparticles. Additionally, a lactose derivative (11-mercapto-3,6,9-trioxaundecyl beta-D-lactoside) was used to stabilize gold nanoparticles to induce aggregation upon addition of the galactose specific lectin Ricinus communis agglutinin (RCA(120)). To examine the specificity of the bioassay, lactose-stabilized gold nanoparticles were mixed with a solution of mannose-stabilized silver nanoparticles to give an aggregation assay capable of detecting two different lectins. When either Con A or RCA(120) was added to the mixed glyconanoparticles, selective recognition of the respective natural ligand was shown by aggregation of a single metal nanoparticle. Centrifugation and removal of the aggregated species enabled further bioassay measurements using the second glyconanoparticle system.