Amplifying the Sensitivity of Polydiacetylene Sensors: The Dummy Molecule Approach.

There is an increasing need for fast and accurate assessment of various health conditions, where polydiacetylenes (PDA), having unique stress-sensitive optical properties, have great potential. When the conjugated backbone of PDA is disturbed by steric repulsion between the receptor-target complexes formed at the PDA surface via specific recognition events, the bandgap of PDA increases and produces color change and fluorescent emission as a dual sensory signal. However, this detection mechanism suggests an intrinsic sensitivity limit of PDA platform because unless adjacent receptors are occupied by target molecules no signal is anticipated. A novel approach to improve the sensitivity and limit of detection of PDA sensors has been developed by preoccupying the surface of PDA liposomes with an optimized amount of artificial target molecules named as dummy molecules. The sensitivity and limit of detection (LOD) showed large improvement by the surface-bound dummy molecules. In addition, the dummy strategy was synergically integrated with another sensitivity enhancing method with a different working mechanism in a PDA sensor for Neomycin detection. When optimized, the LOD of the PDA sensor was improved to 7 nM from 80 nM of the control and the signal intensity increased consistently throughout the entire tested concentration range of the target Neomycin. Finally, the general applicability of the dummy strategy to other target molecules was successfully confirmed by implementing the dummy strategy in a PDA sensor for Surfactin detection.

Growth time-dependent density and surface evolution of silicon nanowires in a vapor-liquid-solid process.

Single crystalline silicon nanowires (SiNWs) were grown on Si(100) substrate using a gold (Au)-catalyzed vapor-liquid-solid (VLS) approach. The dependence of the growth time (i.e., the time of exposure to the Si source) on the density and surface evolution of the grown SiNWs is considered. It was observed that the density of grown SiNWs on Si substrate increased with increasing growth time. The highest density (approximately 1.1 x 10(6) mm(-2)) was reached at 4 hr. Upon further exposure to the Si source, we observed that the density was maintained for up to 9 hr. We suggest that the increased Si chemical potential in Au-Si droplets with increased growth time enhanced the SiNW growth rate at the interfaces between Au-Si droplets and SiNWs, and enhanced the transition of the NWs from the existing Au-Si droplets onto Si substrate. This allows the SiNW density to increase with increased growth time of up to 4 hr. Moreover, we examined the influence of the growth time on surface evolution including Au diffusion, facet and taper formation, and vapor-solid (VS) growth of the SiNWs. To explain the behavior of the grown SiNWs in the VLS process, we propose a combined model using the VLS and VS growth mechanisms.

Novel streptavidin-functionalized silicon nanowire arrays for CD4+ T lymphocyte separation.

Silicon nanowires (SiNWs) offer promising inorganic nanostructures for biomedical application. Here, we report the development of a novel SiNW array designed for isolating primary CD4(+) T lymphocytes from the heterogeneous mixture of cell populations. Our system employed the specific high-affinity binding features of streptavidin (STR)-functionalized SiNW with biotin-labeled CD4(+) T lymphocytes. Fabricated SiNW arrays easily separated the CD4(+) T lymphocytes from the mouse whole splenocytes with over approximately 88% purity and demonstrated tight attachment to CD4(+) T lymphocytes by scanning electron microscopy. Thus, our STR-SiNW arrays provide a potential tool for specific cell separation and further present a possibility to be applied to the other area of biomedical applications.

Polydiacetylene Liposome Microarray toward Facile Measurement of Platelet Activation in Whole Blood.

The necessity of a simple measurement of platelet activation has been increasing in clinical medicine to regulate the proper dose of the antiplatelet drugs for patients having clinical outcomes in acute situations such as angina pectoris, stroke, or peripheral vascular disease or procedures involving angioplasty or coronary thrombolysis. We developed a self-signaling polydiacetylene (PDA) liposome microarray to detect activated platelets from whole blood samples in a single step. A specific antibody, 9F9 antibody, to platelet-bound fibrinogen was selected and conjugated to the PDA liposome microarray to quantify the fibrinogen-bound platelets. The developed PDA liposome-9F9 microarray generated an intense fluorescence signal when activated platelets in whole blood were introduced and also successfully distinguished the reduced platelet activation in the presence of Tirofiban, a model antiplatelet drug. The results of this single-step benchtop assay incorporates simple, sensitive, and rapid attributes that can detect the extent of platelet activation prior to needed clinical procedures.

Inducing angiogenesis with the controlled release of nitric oxide from biodegradable and biocompatible copolymeric nanoparticles.

PURPOSE: Nitric oxide (NO) can be clinically applied at low concentrations to regulate angiogenesis. However, studies using small molecule NO donors (N-diazeniumdiolate, S-nitrosothiol, etc) have yet to meet clinical requirements due to the short half-life and initial burst-release profile of NO donors. In this study, we report the feasibility of methoxy poly(ethylene glycol)-b-poly(lactic-co-glycolic acid) (mPEG-PLGA) nanoparticles (NPs) as NO-releasing polymers (NO-NPs) for inducing angiogenesis. MATERIALS AND METHODS: The mPEG-PLGA copolymers were synthesized by typical ring-opening polymerization of lactide, glycolide and mPEG as macroinitiators. Double emulsion methods were used to prepare mPEG-PLGA NPs incorporating hydrophilic NONOate (dieth-ylenetriamine NONOate). RESULTS: This liposomal NP encapsulates hydrophilic diethylenetriamine NONOate (70%±4%) more effectively than other previously reported materials. The application of NO-NPs at different ratios resulted in varying NO-release profiles with no significant cytotoxicity in various cell types: normal cells (fibroblasts, human umbilical vein endothelial cells and epithelial cells) and cancer cells (C6, A549 and MCF-7). The angiogenic potential of NO-NPs was confirmed in vitro by tube formation and ex vivo through an aorta ring assay. Tubular formation increased 189.8% in NO-NP-treated groups compared with that in the control group. Rat aorta exhibited robust sprouting angiogenesis in response to NO-NPs, indicating that NO was produced by polymeric NPs in a sustained manner. CONCLUSION: These findings provide initial results for an angiogenesis-related drug development platform by a straightforward method with biocompatible polymers.

A Novel Mechanism for Chemical Sensing Based on Solvent-Fluorophore-Substrate Interaction: Highly Selective Alcohol and Water Sensor with Large Fluorescence Signal Contrast.

Differentiation of solvents having similar physicochemical properties, such as ethanol and methanol, is an important issue of interest. However, without performing chemical analyses, discrimination between methanol and ethanol is highly challenging due to their similarity in chemical structure as well as properties. Here, we present a novel type of alcohol and water sensor based on the subtle differences in interaction among solvent analytes, fluorescent organic molecules, and a mesoporous silica gel substrate. A gradual change in the chemical structure of the fluorescent diketopyrrolopyrrole (DPP) derivatives alters their interaction with the substrate and solvent analyte, which creates a distinct intermolecular aggregation of the DPP derivatives on the silica gel substrate depending on the solvent environment and produces a change in the fluorescence color and intensity as a sensory signal. The devised sensor device, which is fabricated with simple drop-casting of the DPP derivative solutions onto a silica gel substrate, exhibited a completely reversible fluorescence signal change with large fluorescence signal contrast, which allows selective solvent detection by simple optical observation with the naked eye under UV light. Superior selectivity of the alcohol and water sensor system, which can clearly distinguish among ethanol, methanol, ethylene glycol, and water, is demonstrated.

Label-free bacterial detection using polydiacetylene liposomes.

Polydiacetylene (PDA) liposomes were prepared to selectively capture target released from bacteria. Specific interplay between released-surfactin and PDA resulted in a conformal change in the structure of PDA, highlighting the potential of indirect interactions between bacteria and PDA in the construction of new label-free bacterial sensors.

Stimuli-Responsive Matrix-Assisted Colorimetric Water Indicator of Polydiacetylene Nanofibers.

An alternative signal transduction mechanism of polydiacetylene (PDA) sensors is devised by combining stimuli-responsive polymer hydrogel as a matrix and PDA sensory materials as a signal-generating component. We hypothesized that volumetric expansion of the polymer hydrogel matrix by means of external stimuli can impose stress on the imbedded PDA materials, generating a sensory signal. PDA assembly as a sensory component was ionically linked with the alginate hydrogel in order to transfer the volumetric expansion force of alginate hydrogel efficiently to the sensory PDA molecules. Under the same swelling ratio of alginate hydrogel, alginate gel having embedded 1-dimensional thin PDA nanofibers (∼20 nm diameter) presented a sharp color change while 0-dimensional PDA liposome did not give any sensory signal when it was integrated in alginate gel. The results implied that dimensionality is an important design factor to realize stimuli-responsive matrix-driven colorimetric PDA sensory systems; more effective contact points between 1-dimensional PDA nanofibers and the alginate matrix much more effectively transfer the external stress exerted by the volumetric expansion force, and thin PDA nanofibers respond more sensitively to the stress.

Highly sensitive turn-on biosensors by regulating fluorescent dye assembly on liposome surfaces.

We developed a new self-signaling sensory system built on phospholipid liposomes having H-aggregated R6G dyes on their surface. Selective molecular recognition of a target by the phospholipid displaces R6G from the liposome surface to turn on fluorescence signal. Selective and sensitive detection of neomycin down to 2.3 nM is demonstrated.