Mechanical measurements of heterogeneity and length scale effects in PEG-based hydrogels.

Colloidal-probe spherical indentation load-relaxation experiments with a probe radius of 3 µm are conducted on poly(ethylene glycol) (PEG) hydrogel materials to quantify their steady-state mechanical properties and time-dependent transport properties via a single experiment. PEG-based hydrogels are shown to be heterogeneous in both morphology and mechanical stiffness at this scale; a linear-harmonic interpolation of hyperelastic Mooney-Rivlin and Boussinesq flat-punch indentation models was used to describe the steady-state response of the hydrogels and determine upper and lower bounds for indentation moduli. Analysis of the transient load-relaxation response during displacement-controlled hold periods provides a means of extracting two time constants τ1 and τ2, where τ1 and τ2 are assigned to the viscoelastic and poroelastic properties, respectively. Large τ2 values at small indentation depths provide evidence of a non-equilibrium state characterized by a phenomenon that restricts poroelastic fluid flow through the material; for larger indentations, the variability in τ2 values decreases and pore sizes estimated from τ2via indentation approach those measured via macroscopic swelling experiments. The contact probe methodology developed here provides a means of assessing hydrogel heterogeneity, including time-dependent mechanical and transport properties, and has potential implications in hydrogel biomedical and engineering applications.

Dataset on microstructural characteristics and mechanical performance of homogeneous and functionally graded fibrous scaffolds.

Data in this article are supplementary to the corresponding research article [1]. Morphological features of homogeneous and graded nanofibrous electrospun gelatin scaffolds were observed using scanning electron microscopy. Microstructural properties including fiber diameter and pore size were determined via image analysis, using ImageJ. Uniaxial tensile and fracture tests were performed on both homogeneous and graded scaffolds using a universal testing machine. Stress-strain curves of all scaffolds are presented. Computing software, MATLAB, was used to design fibrous networks with thickness-dependent density and alignment gradients (DAG). Finite element analysis software, Abaqus, was used to determine the effect of the number of layers on the fracture properties of DAG multilayer scaffolds.

Characterization of PEG-iron oxide hydrogel nanocomposites for dual hyperthermia and paclitaxel delivery.

Hyperthermia, the heating of tissue from 41 to 45 °C, has been shown to improve the efficacy of cancer therapy when used in conjunction with irradiation and/or chemotherapy. In this work, hydrogel nanocomposites have been developed that can control the delivery of both heat and a chemotherapeutic agent (e.g. paclitaxel). The nanocomposites studied involve a stealth, poly(ethylene glycol) (PEG)-based system comprised of PEG (n = 1000) methyl ether methacrylate and PEG (n = 400) dimethacrylate with iron oxide nanoparticles physically entrapped within the hydrogel matrices. The capability of the hydrogel nanocomposites to be heated in an alternating magnetic field was demonstrated. The heating of the hydrogel systems was dependent on the crosslinking of the hydrogel network where hydrogels with lower swelling ratios were found to heat to a greater extent than those with higher ratios. In addition, paclitaxel was shown to exhibit non-Fickian release from the hydrogel systems, with the amount of drug released dependent on the hydrogel network structure. Three cell lines: M059K (glioblastoma), MDA MB 231 (breast carcinoma), and A549 (lung adenocarcinoma) were exposed to paclitaxel only, hyperthermia only, and both paclitaxel and hyperthermia to determine if a synergistic cytotoxic effect was possible for these cell lines. The efficacy of paclitaxel was greater with hyperthermia for the A549 cells; however, the M059K and MDA MB 231 did not show the same response.