Automatic analysis of the continuous edges of stone tools reveals fundamental handaxe variability.

The edges of stone tools have significant technological and functional implications. The nature of these edges-their sharpness, whether they are concave or convex, and their asymmetry-reflect how they were made and how they could be used. Similarly, blunt portions of a tool's perimeter hint at how they could have been grasped or hafted and in which directions force could be applied. However, due to the difficulty in accurately measuring the complex 3D geometry of tool edges with traditional methods, their attributes are often overlooked. When they are analyzed, they have traditionally been assessed with visual qualitative categories or unreliable physical measurements. We introduce new computational 3D methods for automatically and repeatably measuring key attributes of stone tool edges. These methods allow us to automatically identify the 3D perimeter of tools, segment this perimeter according to changes in edge angles, and measure these discrete edge segments with a range of metrics. We test this new computational toolkit on a large sample of 3D models of handaxes from the later Acheulean of the southern Levant. Despite these handaxes being otherwise technologically and morphologically similar, we find marked differences in the amount of knapped outline, edge angle, and the concavity of their edges. We find many handaxes possess blunt portions of perimeter, suitable for grasping, and some handaxes even possess more than one discrete sharp edge. Among our sample, sites with longer occupations and more diverse toolkits possessed handaxes with more diverse edges. Above all, this paper offers new methods for computing the complex 3D geometry of stone tool edges that could be applied to any number of artifact types. These methods are fully automated, allowing the analysis and visualization of entire assemblages.

Can models of evolutionary transition clarify the debates over the Neolithic Revolution?

The 'Neolithic Revolution,' sometimes referred to as the emergence of agriculture at its earliest in the southern Levant, is the most significant shift in human history, shaping the world we live in today. Yet, after 100 years of study, its major cause, tempo (gradual or revolutionary), and impact of human intentionality remain disputed. Here, we examine the research potential of an evolutionary transition in individuality (ETI) to clarify this dramatic shift. Applying an ETI research perspective reveals how different causes and conditions lead to the same result, enabling a holistic view rather than a reduction of 'Neolithic' to 'agriculture,' or to one major climatic condition, inheritance system or standard evolutionary model, thus allowing us to clarify and bypass some of these heated, unresolved disputes. Additionally, unlike current archaeological emphasis on 'where,' 'when,' 'why' and 'how' questions, the ETI perspective offers a productive path for resolving a fundamental preliminary anomaly: why and how could the Neolithic lifeway evolve at all, given the selfish interest of individuals in a hunter-gatherer group? We do not intend to solve the shift to Neolithic lifeways, only to offer a fresh lens for examining it, emphasizing the relevance of tracking within and between group differences. This article is part of the theme issue 'Human socio-cultural evolution in light of evolutionary transitions'.

Butchering knives and hafting at the Late Middle Paleolithic open-air site of Nahal Mahanayeem Outlet (NMO), Israel.

Much of what is known about human behavior and subsistence strategies in the Levantine Middle Paleolithic comes from long sequences from caves and rock shelters. In this context, studies of stone tool function have traditionally focused on determining the use of Levallois points and triangular elements, either as projectiles or, more rarely, multipurpose knives. Little is known about such tool use and hafting in Middle Paleolithic open-air sites in the Levant through the systematic application of micro-wear analysis. Here we report the results of a low and high-power study performed on the lithic assemblage of the Late Middle Paleolithic open-air site of Nahal Mahanayeem Outlet (NMO, Israel). Most pointed items, including Levallois and non-Levallois points, were used as butchering knives, many of them while hafted; to a much lesser extent they were also used for hide, bone, and wood/plant processing activities. Blades and flakes were mostly handheld and used as butchering knives, with hide, bone, antler, and wood/plant-processing tasks being rare. Hafted artifacts include morphologies and activities for which hafting is not required, indicating that NMO inhabitants possessed varied hafting expertise. Wood/plant processing tools, some of which were hafted, attest that manufacture and maintenance tasks were planned well in advance of game procurement at the site. These results attest to early evidence of hafted butchering knives and hafted plant processing tools for a Late Middle Paleolithic open-air site in the Levant, and support previous interpretations of NMO as a short-term task-specific location focused on animal processing activities, mostly butchery.

The limestone spheroids of 'Ubeidiya: intentional imposition of symmetric geometry by early hominins?

Spheroids are one of the least understood lithic items yet are one of the most enduring, spanning from the Oldowan to the Middle Palaeolithic. Why and how they were made remains highly debated. We seek to address whether spheroids represent unintentional by-products of percussive tasks or if they were intentionally knapped tools with specific manufacturing goals. We apply novel three-dimensional analysis methods, including spherical harmonics and surface curvature, to 150 limestone spheroids from 'Ubeidiya (ca 1.4 Ma), presently the earliest Acheulean occurrence outside of Africa, to bring a new perspective to these enigmatic artefacts. We reconstruct the spheroid reduction sequence based on trends in their scar facets and geometry, finding that the spheroid makers at 'Ubeidiya followed a premeditated reduction strategy. During their manufacture, the spheroids do not become smoother, but they become markedly more spherical. They approach an ideal sphere, a feat that likely required skilful knapping and a preconceived goal. Acheulean bifaces are currently thought to represent the earliest evidence of hominins imposing a premeditated, symmetrical shape on stone. The intentional production of sphere-like objects at 'Ubeidiya similarly shows evidence of Acheulean hominins desiring and achieving intentional geometry and symmetry in stone.

Cultural conservatism and variability in the Acheulian sequence of Gesher Benot Ya'aqov.

The Acheulian Technocomplex exhibits two phenomena: variability and conservatism. Variability is expressed in the composition and frequencies of tool types, particularly in the varying frequencies of bifaces (handaxes and cleavers). Conservatism is expressed in the continuous presence of bifaces along an immense time trajectory. The site of Gesher Benot Ya'aqov (GBY) offers a unique opportunity to study aspects of variability and conservatism as a result of its long cultural-stratigraphic sequence containing superimposed lithic assemblages. This study explores aspects of variability and conservatism within the Acheulian lithic assemblages of GBY, with emphasis placed on the bifacial tools. While variability has been studied through a comparison of typological frequencies in a series of assemblages from the site, evidence for conservatism was examined in the production modes expressed by the reduction sequence of the bifaces. We demonstrate that while pronounced typological variability is observed among the GBY assemblages, they were all manufactured by the same technology. The technology, size, and morphology of the bifaces throughout the entire stratigraphic sequence of GBY reflect the strong conservatism of their makers. We conclude that the biface frequency cannot be considered as a chrono/cultural marker that might otherwise allow us to distinguish between different phases within the Acheulian. The variability observed within the assemblages is explained as a result of different activities, tasks, and functions, which were carried out at specific localities along the shores of the paleo-Hula Lake in the early Middle Pleistocene.

Studying post depositional damage on Acheulian bifaces using 3-D scanning.

In this study, we explore post-depositional damage observed on Acheulian bifacial tools by comparing two assemblages: a collection of archaeological handaxes which shows pronounced damage marks associated with high energy water accumulation system, and an experimental assemblage that was rolled and battered in a controlled simulation experiment. Scanning the two assemblages with a precise 3-D optical scanner and subjecting the measured surfaces to the same mathematical analysis enabled the development of quantitative measures assessing and comparing the degree of damage observed on archaeological and experimental tools. The method presented here enables the definition of morphological patterns typically resulting from battering and different from intentional controlled knapping. The most important kinds of damage included the formation of deep, random 'notch-like' scars on the lateral edges and substantial degrees of damage to the tip of the tools, but minimal damage to the artifact's butt. Quantifying the degree of damage and its location and morphological characters allows us to present a method by which post depositional damage on archaeological tools can be measured.

Early line and hook fishing at the Epipaleolithic site of Jordan River Dureijat (Northern Israel).

Nineteen broken and complete bone fish hooks and six grooved stones recovered from the Epipaleolithic site of Jordan River Dureijat in the Hula Valley of Israel represent the largest collection of fishing technology from the Epipaleolithic and Paleolithic periods. Although Jordan River Dureijat was occupied throughout the Epipaleolithic (~20-10 kya the fish hooks appear only at the later stage of this period (15,000-12,000 cal BP). This paper presents a multidimensional study of the hooks, grooved stones, site context, and the fish assemblage from macro and micro perspectives following technological, use wear, residue and zooarchaeological approaches. The study of the fish hooks reveals significant variability in hook size, shape and feature type and provides the first evidence that several landmark innovations in fishing technology were already in use at this early date. These include inner and outer barbs, a variety of line attachment techniques including knobs, grooves and adhesives and some of the earliest evidence for artificial lures. Wear on the grooved stones is consistent with their use as sinkers while plant fibers recovered from the grooves of one hook shank and one stone suggest the use of fishing line. This together with associations between the grooved stones and hooks in the same archaeological layers, suggests the emergence of a sophisticated line and hook technology. The complexity of this technology is highlighted by the multiple steps required to manufacture each component and combine them into an integrated system. The appearance of such technology in the Levantine Epipaleolithic record reflects a deep knowledge of fish behavior and ecology. This coincides with significant larger-scale patterns in subsistence evolution, namely broad spectrum foraging, which is an important first signal of the beginning of the transition to agriculture in this region.

Monumental megalithic burial and rock art tell a new story about the Levant Intermediate Bronze "Dark Ages".

The Intermediate Bronze Age (IB) in the Southern Levant (ca. 2350-2000 BCE) is known as the "Dark Ages," following the collapse of Early Bronze urban society and predating the establishment of the Middle Bronze cities. The absence of significant settlements and monumental building has led to the reconstruction of IB social organization as that of nomadic, tribal society inhabiting rural villages with no central governmental system. Excavation in the Shamir Dolmen Field (comprising over 400 dolmens) on the western foothills of the Golan Heights was carried out following the discovery of rock art engravings on the ceiling of the central chamber inside one of the largest dolmens ever recorded in the Levant. Excavation of this multi-chambered dolmen, covered by a basalt capstone weighing some 50 tons, revealed a secondary multi-burial (of both adults and children) rarely described in a dolmen context in the Golan. Engraved into the rock ceiling above the multi-burial is a panel of 14 forms composed of a vertical line and downturned arc motif. 3D-scanning by structured-light technology was used to sharpen the forms and revealed the technique employed to create them. Building of the Shamir dolmens required a tremendous amount of labor, architectural mastery, and complex socio-economic organization well beyond the capacity of small, rural nomadic groups. The monumental megalithic burial of the Shamir dolmens indicates a hierarchical, complex, non-urban governmental system. This new evidence supports a growing body of recent criticism stemming from new discoveries and approaches that calls for rethinking our views of the Levantine IB "Dark Ages."

A new type of anvil in the Acheulian of Gesher Benot Ya'aqov, Israel.

We report here on the identification and characterization of thin basalt anvils, a newly discovered component of the Acheulian lithic inventory of Gesher Benot Ya'aqov (GBY). These tools are an addition to the array of percussive tools (percussors, pitted stones and anvils) made of basalt, flint and limestone. The thin anvils were selected from particularly compact, horizontally fissured zones of basalt flows. This type of fissuring produces a natural geometry of thick and thin slabs. Hominins at GBY had multiple acquisition strategies, including the selection of thick slabs for the production of giant cores and cobbles for percussors. The selection of thin slabs was carried out according to yet another independent and targeted plan. The thinness of the anvils dictated a particular range of functions. The use of the anvils is well documented on their surfaces and edges. Two main types of damage are identified: those resulting from activities carried out on the surfaces of the anvils and those resulting from unintentional forceful blows (accidents de travaille). Percussive activities that may have been associated with the thin anvils include nut cracking and the processing of meat and bones, as well as plants.

Spatial organization of hominin activities at Gesher Benot Ya'aqov, Israel.

The spatial designation of discrete areas for different activities reflects formalized conceptualization of a living space. The results of spatial analyses of a Middle Pleistocene Acheulian archaeological horizon (about 750,000 years ago) at Gesher Benot Ya'aqov, Israel, indicate that hominins differentiated their activities (stone knapping, tool use, floral and faunal processing and consumption) across space. These were organized in two main areas, including multiple activities around a hearth. The diversity of human activities and the distinctive patterning with which they are organized implies advanced organizational skills of the Gesher Benot Ya'aqov hominins.

Nuts, nut cracking, and pitted stones at Gesher Benot Ya'aqov, Israel.

The Acheulian site of Gesher Benot Ya'aqov (Israel) has revealed a unique association of edible nuts with pitted hammers and anvils. Located in the Dead Sea rift, on the boundary between the Arabian and African plates, the site dates to the Early-Middle Pleistocene, oxygen isotope stage 19. In a series of strata, seven species of nuts, most of which can be cracked open only by a hard hammer, were uncovered. Five of the species are extant terrestrial nuts, and two are aquatic nuts now extinct in the Levant. In addition, the site yielded an assemblage of pitted hammers and anvils similar in pit morphology to those used by chimpanzees and contemporary hunter-gatherers. This is the first time, to our knowledge, that a site has offered both paleobotanical and lithic evidence of plant foods eaten by early hominins and technologies used for processing these foods. The evidence also sheds light on the structure of the community: ethnographic analogies suggest that mixedgender groups may have been active on the shores of paleoLake Hula.