Azo-Cyanamide Bridged Dinuclear Iron Complexes Exhibiting no Electronic Coupling but Moderate Magnetic Coupling between the two Iron Centers.

To investigate the effect of long-distance organic ligand on electronic coupling between metallic atoms, the mononuclear and dinuclear complexes [Cp(dppe)Fe(apc)] (1), [{Cp(dppe)Fe}2(µ-adpc)] (2), [{CpMe5(dppe)Fe}2(µ-adpc) (3) and their oxidized complexes [Cp(dppe)Fe(apc)][PF6] (1[PF6]), [{Cp(dppe)Fe}2(µ-adpc)][PF6] (2[PF6]2), [{CpMe5(dppe)Fe}2(µ-adpc)][PF6]2 (3[PF6]2) (Cp=1,3-cyclopentadiene, CpMe5=1,2,3,4,5-pentamethylcyclopentadiene, dppe=1,2-bis(diphenylphosphino)ethane), apc-=4-azo(phenylcyanamido)benzene and adpc2-=4,4'-azodi(phenylcyanamido)) were synthesized and characterized by cyclic voltammetry, UV-vis, single-crystal X-ray diffraction and Mössbauer spectra. Electrochemical measurements showed no electronic coupling between the two terminal Fe units, However, the investigation results of the magnetic properties of the two-electron oxidized complexes indicate the presence of moderate antiferromagnetic coupling across 18 Šdistance.

Mo4+-Doped CuS Nanosheet-Assembled Hollow Spheres for CO2 Electroreduction to Ethanol in a Flow Cell.

Electrocatalytic CO2 reduction reaction (CO2RR) to ethanol has been widely researched for potential commercial application. However, it still faces limited selectivity at a large current density. Herein, Mo4+-doped CuS nanosheet-assembled hollow spheres are constructed to address this issue. Mo4+ ion doping modifies the local electronic environments and diversifies the binding sites of CuS, which increases the coverage of linear *COL and produces bridge *COB for subsequent *COL-*COH coupling toward ethanol production. The optimal Mo9.0%-CuS can electrocatalyze CO2 to ethanol with a faradaic efficiency of 67.5% and a partial current density of 186.5 mA cm-2 at -0.6 V in a flow cell. This work clarifies that doping high valence transition metal ions into Cu-based sulfides can regulate the coverage and configuration of related intermediates for ethanol production during the CO2RR in a flow cell.

Two new baccharane triterpenes isolated from Rhus chinensis.

Two new baccharane triterpenes, 17,24-epoxy-23-en-baccharan-3-one (1) and 17,24(S)-epoxy-25-en-21-hydroxy-baccharan-3-one (2) were isolated from Rhus chinensis Mill. The structures were established on the basis of UV, IR, HR-ESI-MS, 1D and 2D NMR spectroscopy and X-ray diffraction analysis.

Subnanoscale Dual-Site Pd-Pt Layers Make PdPtCu Nanocrystals CO-Tolerant Bipolar Effective Electrocatalysts for Alcohol Fuel Cell Devices.

Finding a high-performance low-Pt bipolar electrocatalyst in actual direct alcohol fuel cells (DAFCs) remains challenging and desirable. Here, we developed a crystalline PdPtCu@amorphous subnanometer Pd-Pt "dual site" layer core-shell structure for the oxygen reduction reaction (ORR) and alcohol (methanol, ethylene glycol, glycerol, and their mixtures) oxidation reaction (AOR) in an alkaline electrolyte (denoted D-PdPtCu). The prepared D-PdPtCu/C achieved a direct 4-electron ORR pathway, a full oxidation pathway for AOR, and high CO tolerance. The ORR mass activity (MA) of D-PdPtCu/C delivered a 52.8- or 59.3-fold increase over commercial Pt/C or Pd/C, respectively, and no activity loss after 20000 cycles. The D-PdPtCu/C also exhibited much higher AOR MA and stability than Pt/C or Pd/C. Density functional theory revealed the intrinsic nature of a subnanometer Pd-Pt "dual site" surface for ORR and AOR activity enhancement. The D-PdPtCu/C as an effective bipolar electrocatalyst yielded higher peak power densities than commercial Pt/C in actual DAFCs.

Biomimetic Phthalocyanine-Based Covalent Organic Frameworks with Tunable Pendant Groups for Electrocatalytic CO2 Reduction.

Electrocatalytic carbon dioxide reduction reaction (CO2RR) is an effective way of converting CO2 into value-added products using renewable energy, whose activity and selectivity can be in principle maneuvered by tuning the microenvironment near catalytic sites. Here, we demonstrate a strategy for tuning the microenvironment of CO2RR by learning from the natural chlorophyll and heme. Specifically, the conductive covalent organic frameworks (COFs) linked by piperazine serve as versatile supports for single-atom catalysts (SACs), and the pendant groups modified on the COFs can be readily tailored to offer different push-pull electronic effects for tunable microenvironment. As a result, while all the COFs exhibit high chemical structure stability under harsh conditions and good conductivity, the addition of -CH2NH2 can greatly enhance the activity and selectivity of CO2RR. As proven by experimental characterization and theoretical simulation, the electron-donating group (-CH2NH2) not only reduces the surface work function of COF, but also improves the adsorption energy of the key intermediate *COOH, compared with the COFs with electron-withdrawing groups (-CN, -COOH) near the active sites. This work provides insights into the microenvironment modulation of CO2RR electrocatalysts at the molecular level.

Integration of MnO2 Nanosheets with Pd Nanoparticles for Efficient CO2 Electroreduction to Methanol in Membrane Electrode Assembly Electrolyzers.

It remains a challenge to design a catalyst with high selectivity at a large current density toward CO2 electrocatalytic reduction (CO2ER) to a single C1 liquid product of methanol. Here, we report the design of a catalyst by integrating MnO2 nanosheets with Pd nanoparticles to address this challenge, which can be implemented in membrane electrode assembly (MEA) electrolyzers for the conversion of CO2ER to methanol. Such a strategy modifies the electronic structure of the catalyst and provides additional active sites, favoring the formation of key reaction intermediates and their successive evolution into methanol. The optimal catalyst delivers a Faradaic efficiency of 77.6 ± 1.3% and a partial current density of 250.8 ± 4.3 mA cm-2 for methanol during CO2ER in an MEA electrolyzer by coupling anodic oxygen evolution reaction with a full-cell energy efficiency achieving 29.1 ± 1.2% at 3.2 V. This work opens a new avenue to the control of C1 intermediates for CO2ER to methanol with high selectivity and activity in an MEA electrolyzer.

Coexistence of Three Different Spin States in a Cyanido-Bridged Trinuclear Iron(III) Complex with an Unusual FeIII to Ligand Charge Transfer.

We report a trinuclear iron(III) cyanido-bridged complex trans-[CpMe3 FeIII (dppe)(CN)]2 [FeIII (LN4 )][PF6 ]4 (2[PF6 ]4 ) as the oxidation product of binuclear complex [CpMe3 (dppe)FeII CN-FeIII (LN4 )][PF6 ] (1[PF6 ]) (CpMe3 =1, 2, 4-trimethyl-1,3-cyclo-pentadienyl, dppe=1,2-bis(diphenylphosphino)ethane, LN4 =pentane-2,4-dione-bis(S-methylisothiosemicarbazonato). Complex 1[PF6 ] possesses an intermediate-spin five-coordinated FeIII (S=3/2) which couples antiferromagnetically to the π-radical ligand (L⋅N4 )2- and shows a LMCT (ligand to metal charge transfer) transition from (L⋅N4 )2- to FeIII and the FeII →FeIII MMCT transition. Upon oxidation of 1[PF6 ], (L⋅N4 )2- loses one electron to be the strong electron-attracting ligand (LOx N4 )- and the intermediate-spin five-coordinated FeIII (S=3/2) becomes a low-spin six-coordinated FeIII (S=1/2) in 2[PF6 ]4 . Also interestingly, 2[PF6 ]4 presents the coexistence of three different spin states (one S=3/2 and two S=1/2) and an uncommon FeIII →(LOx N4 )- MLCT transition, confirmed by the experimental results and supported by the TDDFT calculations.

Metal-Metal Charge Transfer Properties of a Series of Trinuclear Fe2 Ru and Corresponding Pentanuclear Fe2 Ru2 Ag Cyanido-Bridged Complexes.

A series of trimetallic cyanidometal-bridged compounds [Men Cp(dppe)FeII -(µ-NC)-RuII (MeOpy)4 -(µ-CN)-FeII (dppe)CpMen ] - [PF6 ]2 (N[PF6 ]2 , n=0, N =1; n=1, N=2; n=3, N=3; Cp=cyclopentadiene, dppe=1,2-bis(diphenylphosphino)ethane, MeOpy=4-methoxypyridine) and their one- and two-electron oxidized compounds N3+ and N4+ were synthesized and characterized. Meanwhile, a series of corresponding linear cyanido-bridged pentanuclear compounds [Men Cp(dppe)FeIII -(µ-NC)-RuII (MeOpy)4 -(µ-NC)-AgI -(µ-CN)-RuII (MeOpy)4 -(µ-CN)-FeIII (dppe)CpMen ][BF4 ]5 (M[BF4 ]5 , n=0, M=4; n=1, M=5; n=3, M=6) were also obtained and well characterized. The investigations suggest that in the trinuclear system there exists remote interaction between the two Fe centers, but no significant interactions exist across the central silver unit between the metals on the two sides of the silver center in the pentanuclear system. In both the trinuclear N4+ and the pentanuclear M5+ complexes, there exists the neighboring RuII →FeIII MM'CT transitions, and the MM'CT energy in the corresponding trinuclear system is higher than those in the pentanuclear system in which no remote metal-metal interaction occurs. Meanwhile, as the substituted methyl groups on the cyclopentadiene increases, the redox potential of the ruthenium in the trinuclear N4+ series increases, but that in the pentanuclear M5+ complexes decreases.

Low-Pt Octahedral PtCuCo Nanoalloys: "One Stone, Four Birds" for Oxygen Reduction and Methanol Oxidation Reactions.

To find a low-Pt electrocatalyst that is functionally integrated and superior to the state-of-the-art single-Pt electrocatalyst is expectedly a challenge. We have in this study found that the reactivity of the oxygen reduction reaction (ORR) and the methanol oxidation reaction (MOR), in both acidic and alkaline electrolytes (viz., four half-cell reactions), can be modified and greatly enhanced by the electronic and/or synergistic effects of a low-Pt octahedral PtCuCo alloy. For the ORR, the mass activity (MA) of Pt0.23Cu0.64Co0.13/C in an acidic or alkaline electrolyte was 14.3 or 10.7 times that of the commercial Pt/C. For the MOR, the MA of Pt0.23Cu0.64Co0.13/C in an acidic or alkaline electrolyte was 7.2 or 3.4 times that of the commercial Pt/C. In addition, Pt0.23Cu0.64Co0.13/C exhibited an increased durability and CO tolerance, as compared with the commercial Pt/C. Density functional theory calculations demonstrated that the PtCuCo(111) surface can effectively optimize the O* binding energy. This work has successfully shown an example of how both acidic and alkaline ORR and MOR activities can be significantly synchronously enhanced.

Electronic Transition and Magnetic Coupling Regulation in Trimetallic Complexes Featuring a New Bridging Ligand Obtained by Oxidative Addition.

A series of trimetallic complexes [FeIII(µ-L)(py)]2MII(py)n (n = 2, MII = MnII, 1; FeII, 2; CoII, 3; ZnII, 4; n = 3, MII = CdII, 5) with a new bridging ligand L4- (deprotonated 1,2-N1,N2-bis(2-mercaptoanil) oxalimidic acid) were synthesized and fully characterized by elemental analysis, single-crystal X-ray crystallography, IR, and Mössbauer spectra. Interestingly, the bridging ligand was obtained by oxidative addition of the (gma•)3- ligand from the mononuclear precursor Fe(gma)py (gma = glyoxal-bis(2-mercaptoanil)). In the obtained complexes, the bridging ligand L4- coordinates to the terminal FeIII ions (intermediate-spin with SFe = 3/2) by the N, S atoms, and coordinate to the central metal MII ion by the four O atoms. The resonance structure of the bridging ligand can be described as the two 4π-electron delocalized systems connected by one single-bond (C1-C2), which is different from the electronic structure of the precursor Fe(gma)py. Remarkably, the magnetic coupling interaction can be regulated through the central metal. The ferromagnetic coupling constant J gradually decreases as MII changes from FeII to CoII and MnII, while the paramagnetic behaviors are presented when MII = ZnII and CdII, confirmed by the magnetic susceptibility measurements and further supported by using the PHI program. Furthermore, the bridging ligand to the terminal FeIII charge transfer (LMCT) transitions emerged in all complexes but the central FeII to terminal FeIII charge transfer (MMCT) only presented in complex 2, strongly supported by the UV/vis-NIR electronic spectra and TDDFT calculations.

Four sesquiterpenes isolated from Taraxacum mongolicum.

One new sesquiterpene, (6S,7R,11S)-13-carboxy-1(10)-en-dihydroartemisinic acid (1), together with three known sesquiterpenes, ainsliaea acid B (2), mongolicumin B (3), and 11ß,13-dihydroxydeacetylmatricarin (4) were isolated from Taraxacum mongolicum Hand.-Mazz. The structures were established on the basis of UV, IR, HR-ESI-MS, 1D and 2D NMR spectroscopy, ECD spectroscopy, and X-ray diffraction analysis. Compound 1 was found to have potential anti-inflammatory activity and could reduce LPS-induced NO levels in murine macrophage, with inhibitory rate of 37%.

Ag+ -Doped InSe Nanosheets for Membrane Electrode Assembly Electrolyzer toward Large-Current Electroreduction of CO2 to Ethanol.

It is an appealing approach to CO2 utilization through CO2 electroreduction (CO2 ER) to ethanol at high current density; however, the commonly used Cu-based catalysts cannot sustain large current during CO2 ER despite their capability for ethanol production. Herein, we report that Ag+ -doped InSe nanosheets with Se vacancies can address this grand challenge in a membrane electrode assembly (MEA) electrolyzer. As revealed by our experimental characterization and theoretical calculation, the Ag+ doping, which can tailor the electronic structure of InSe while diversifying catalytically active sites, enables the formation of key reaction intermediates and their sequential evolution into ethanol. More importantly, such a material can well work for large-current conditions in MEA electrolyzers with In2+ species stabilized via electron transfer from Ag to Se. Remarkably, in an MEA electrolyzer by coupling cathodic CO2 ER with anodic oxygen evolution reaction (OER), the optimal catalyst exhibits an ethanol Faradaic efficiency of 68.7 % and a partial current density of 186.6 mA cm-2 on the cathode with a full-cell ethanol energy efficiency of 26.1 % at 3.0 V. This work opens an avenue for large-current production of ethanol from CO2 with high selectivity and energy efficiency by rationally designing electrocatalysts.

High CO-Tolerant Ru-Based Catalysts by Constructing an Oxide Blocking Layer.

CO poisoning of Pt-group metal catalysts is a long-standing problem, particularly for hydrogen oxidation reaction in proton exchange membrane fuel cells. Here, we report a catalyst of Ru oxide-coated Ru supported on TiO2 (Ru@RuO2/TiO2), which can tolerate 1-3% CO, enhanced by about 2 orders of magnitude over the classic PtRu/C catalyst, for hydrogen electrooxidation in a rotating disk electrode test. This catalyst can work stably in 1% CO/H2 for 50 h. About 20% of active sites can survive even in a pure CO environment. The high CO tolerance is not via a traditional bifunctional mechanism, i.e., oxide promoting CO oxidation, but rather via hydrous metal oxide shell blocking CO adsorption. An ab initio molecular dynamics (AIMD) simulation indicates that water confined in grain boundaries of the Ru oxide layer and Ru surface can suppress the diffusion and adsorption of CO. This oxide blocking layer approach opens a promising avenue for the design of high CO-tolerant electrocatalysts for fuel cells.

Effects of cis/trans-Configuration and Ligand Substitution of the Cyanidometal Bridge on Metal to Metal Charge Transfer Properties in Mixed Valence Complexes.

To investigate the effects of cis/trans-configuration of the cyanidometal bridge and the electron donating ability of the auxiliary ligand on the cyanidometal bridge on metal to metal charge transfer (MMCT) in cyanidometal-bridged mixed valence compounds, two groups of trinuclear cyanidometal-bridged compounds cis/trans-[Cp(dppe)Fe(µ-NC)Ru(4,4'-dmbpy)2 (µ-CN)Fe(dppe)Cp][PF6 ]n (n=2 (cis/trans-1[PF6 ]2 ), 3 (cis/trans-1[PF6 ]3 ), 4 (cis/trans-1[PF6 ]4 )) and cis/trans-[Cp(dppe)Fe(µ-NC)Ru(bpy)2 (µ-CN)Fe(dppe)Cp][PF6 ]3 (cis/trans-2[PF6 ]3 ) were synthesized and fully characterized. The experimental results indicate that for these one- and two-electron oxidation mixed valence compounds, the trans-configuration compounds are more beneficial for MMCT than the cis-configuration compounds, and increasing the electron donating ability of the auxiliary ligand on the cyanidometal bridge is also conductive to MMCT. Moreover, compounds cis/trans-1[PF6 ]n (n=3, 4) and cis/trans-2[PF6 ]3 belong to localized compounds by analyzing the experimental characterization results, supported by the TDDFT calculations.

Electrocatalysis CO2 to Tunable Syngas upon Fe Clusters Catalyst Dispersed on Bamboo-like NCTs.

Herein, we report a catalyst of Fe@NBCT with a high performance in electrocatalytic CO2 to syngas with tunable H2/CO ratio. Both in situ synchrotron radiation Fourier transform infrared spectra (SR-FTIR) and density functional theory (DFT) calculation proved that the differing N-doping carbon matrix and Fe nanoclusters (NCs) play dramatic roles in tuning the ratio of syngas during the electrocatalytic carbon dioxide reduction reaction (EC-CO2RR) process.

Influence of the CN Orientation on the Degree of Electron Delocalization of Ru-Ru-Ru Mixed-Valent Complexes.

Investigations on mixed-valent complexes in the Class II/Class III frontier have been a particularly interesting issue due to their special electron delocalization. In this work, a pair of cyanidometal-/isocyanidometal-bridged Ru-Ru-Ru compounds, cis-[Cp(dppe)Ru-B-Ru(dppe)Cp]2+ (B = NCRu(bpy)2CN, 12+; B = CNRu(bpy)2NC, 22+; Cp = 1,3-cyclopentadienyl, dppe = 1,2-bis(diphenlyphosphine)ethane, bpy = 2,2'-bipyridine), and one-electron oxidized 13+ and 23+ were synthesized and well characterized. For the two-electron oxidized 14+ and 24+, their Fourier transform infrared (FTIR) and UV-vis-NIR spectra were investigated by employing spectroelectrochemical methods. The time-dependent density-functional theory (TDDFT) calculations and the experimental results indicate that the one-/two-electron oxidized mixed-valent compounds belong to Class II-III systems.

Insights into reaction mechanisms of ethanol electrooxidation at the Pt/Au(111) interfaces using density functional theory.

Understanding ethanol electrooxidation reaction kinetics is fundamental to the development of direct ethanol fuel cells. The utilization of binary PtAu catalysts has been reported recently as an effective strategy to enhance ethanol electrocatalytic oxidation; however, the catalytic reaction mechanisms are still unclear. In this work, we systematically studied the ethanol electrooxidation reaction mechanisms on Pt/Au(111) model surfaces at an atomic level through high level density functional theory (DFT) calculations; particularly the flat (111) terrace and the stepped (111) × (110) and (111) × (100) interfaces with diverse surface atomic arrangements were considered, respectively. It was found that for ethanol dissociation, the flat (111) terrace is more active than the stepped (111) × (110) and (111) × (100) interfaces. The stepped interfaces, however, could activate water from the aqueous electrolyte solution to form adsorbed OH* at the electrode potential below 0.53 V vs. SHE (standard hydrogen electrode), which is of great importance in coupling with the CH3CO* intermediate formed from ethanol dissociation to produce acetic acid as the final product of the ethanol electrooxidation reaction without releasing CO2. The C-C bond splitting process for ethanol oxidation to form C1 products was very limited. The terrace sites can facilitate both ethanol decomposition and acetic acid formation at the electrode potential above 0.53 V vs. SHE. Our results clearly identify the fact that for ethanol electrooxidation reactions, with an increase in electrode potential, the active sites on Pt/Au(111) surfaces change from those at the stepped interfaces to the flat terrace sites.

High activity of step sites on Pd nanocatalysts in electrocatalytic dechlorination.

The role of step sites on nanocatalysts in the electrocatalytic dechlorination reaction (ECDR) was studied using 3 Pd nanocatalysts with different densities of step sites, which decreased in the order of: tetrahexahedral Pd{310} nanocrystals (THH Pd{310} NCs) > commercial Pd nanoparticles (Pd black) > cubic Pd{100} NCs. The two well-defined Pd NCs served as model catalysts and were prepared through the electrochemical square-wave potential (SWP) method. The toxic herbicide alachlor was first employed in this study as an objective probe to determine the dechlorination performance, which was quantified by the alachlor removal (Rala), the current efficiency (CEala), and the dechlorination selectivity (Sdes). The experimental results demonstrated that the THH Pd{310} NCs with abundant step sites exhibited much higher electrocatalytic performance compared to the cubic Pd{100} NCs with terrace sites. The combination of cyclic voltammetry studies, electrochemical in situ FTIR analysis, and density functional theory (DFT) calculations revealed that the adsorbed CO bond and generated on the step sites could lower the C-Cl bond splitting barrier, leading to a high ECDR efficiency. Other chlorinated organics with an activated carbon atom were also investigated, which revealed that the superiority of the step sites toward Cl-C bond breaking was particular to the compounds with CO bonds. This study provides a deep understanding of high actvitiy of step sites on Pd NCs in EHDC and a strategy to improve this important environmental electrocatalysis process.

Two new sesquiterpene dimers isolated from the roots of Saussurea lappa (Yunmuxiang).

Two new sesquiterpene dimers, lappadimers A and B, were isolated from the roots of Saussurea lappa (Yunmuxiang). Their structures were established on the basis of spectroscopic methods. They were found to have potential anti-inflammatory activity at 10 µM and could reduce LPS-induced NO levels in murine macrophage, with inhibitory rates of 67% and 47%, respectively.

Over 70 % Faradaic Efficiency for CO2 Electroreduction to Ethanol Enabled by Potassium Dopant-Tuned Interaction between Copper Sites and Intermediates.

It is highly desired yet challenging to steer the CO2 electroreduction reaction (CO2 ER) toward ethanol with high selectivity, for which the evolution of reaction intermediates on catalytically active sites holds the key. Herein, we report that K doping in Cu2 Se nanosheets array on Cu foam serves as a versatile way to tune the interaction between Cu sites and reaction intermediates in CO2 ER, enabling highly selective production of ethanol. As revealed by characterization and simulation, the electron transfer from K to Se can stabilize CuI species which facilitate the adsorption of linear *COL and bridge *COB intermediates to promote C-C coupling during CO2 ER. As a result, the optimized K11.2% -Cu2 Se nanosheets array can catalyze CO2 ER to ethanol as a single liquid product with high selectivity in a potential area from -0.6 to -1.2 V. Notably, it offers a Faradaic efficiency of 70.3 % for ethanol production at -0.8 V with as is stable for 130 h.