Anterior Talofibular Ligament Repair in Combination With Anterior Tibiofibular Ligament Distal Fascicle Transfer for The Treatment of Chronic Lateral Ankle Instability: A Finite Element Analysis.

In recent years, anterior tibiofibular ligament-distal fascicle transfers for anterior talofibular ligament augmentation repair have proposed. However, a comprehensive biomechanical study on the anterior tibiofibular ligament-distal fascicle transfer is still lacking. We are established four distinct groups, namely the normal, the anterior talofibular ligament rupture, the anterior talofibular ligament repair, and the anterior talofibular ligament repair + anterior tibiofibular ligament-distal fascicle transfer. We assessed the anterior drawer test and varus stress test of the ankle in each group. Moreover, we employed the model to simulate and compute the total displacement and von-Mises stress of the talus cartilage at varying gait phases, including foot strike, tibia vertical, and toe-off phases. The results of the anterior drawer test and varus stress test revealed that the anterior talofibular ligament repair + anterior tibiofibular ligament-distal fascicle transfer group exhibited greater closeness to the normal group. Regarding von-Mises stress in cartilage, the three gait instants had higher values in the anterior talofibular ligament repair + anterior tibiofibular ligament-distal fascicle transfer group than the other groups. Nevertheless, regarding total displacement, the toe-off phases exhibited higher values in the anterior talofibular ligament repair + anterior tibiofibular ligament-distal fascicle transfer group than the other groups. Using ATiFL-DF transfer to augment ATFL repair is a potential feasible procedure. However, this procedure could potentially compromise the anterior tibiofibular ligament's contribution to the dynamic stability of the ankle. Therefore, we recommend conducting further in-depth research to ensure the suitability and success of this technique in a clinical environment.

A novel classification of lateral malleolus morphological characteristics based on three-dimensional computed tomography reconstruction.

BACKGROUND: The study was to establish a novel classification of the morphological characteristics of fibula anterior-inferior margin (FAIM), which was reported in few studies. METHODS: The 501 images with three-dimensional computed tomography (3D CT) reconstruction were reviewed retrospectively. The width, height, thickness, long axis, short axis, and lateral malleolus angle were measured. RESULTS: The FAIM was divided into Angular, Flat, and Arc. The Flat has no distinct fibular obscure tubercles (FOT). The short axis of Angular and Arc were more significant than the Flat (P < 0. 05). The height of left was larger than the right, but short axis was less than it (P < 0.05). The height and short axis of males were larger than the females (P < 0.05). CONCLUSIONS: A novel classification (the Angular, Flat and Arc) of FAIM was identified based on lateral malleolus morphology, and it suggested that not all have obvious FOT. LEVEL OF EVIDENCE: Level Ⅲ, retrospective study.

Effects of Kinesio Taping on Neck Pain: A Meta-Analysis and Systematic Review of Randomized Controlled Trials.

INTRODUCTION: Neck pain constitutes a prevalent and burdensome health issue, substantially impairing patients' quality of life and functional capabilities. Kinesio taping (KT), a commonly employed intervention within physical therapy, holds promise for mitigating such symptoms; however, a comprehensive evaluation of its efficacy and evidence base is lacking. Therefore, this study endeavors to systematically investigate the therapeutic effects of KT on both subjective neck pain intensity and objective measures of physical activity limitations through a rigorous meta-analytic approach. By synthesizing existing literature and scrutinizing methodological nuances, we aim to furnish healthcare practitioners with evidence-informed insights, facilitating more judicious clinical decision-making and optimizing patient outcomes. METHODS: According to the PRISMA guidelines, we conducted searches on PubMed, Cochrane Library, Embase, and Web of Science for randomized controlled trials (RCTs) investigating the efficacy of KT in treating neck pain. Screening was performed based on predefined inclusion and exclusion criteria. Characteristics of the included RCTs were extracted. Trial heterogeneity was assessed using the I2 statistic. Meta-analysis was conducted using Stata 17 software. Risk of bias and methodological quality were evaluated using the Cochrane Risk of Bias 2 tool and the PEDro scale, respectively. RESULTS: In our analysis of 10 RCTs involving 620 patients meeting our inclusion criteria, KT demonstrated significant beneficial effects on neck pain, notably surpassing conventional treatment (weighted mean difference = -0.897, 95% CI -1.30 to -0.49, P < 0.001). Subgroup analysis further revealed that KT exhibited particularly pronounced efficacy in the treatment of nonspecific neck pain and mechanical neck pain, with a more substantial effect observed after 4 weeks of KT intervention compared to 1 week. Moreover, KT demonstrated superior efficacy in alleviating pain symptoms compared to both conventional treatment and sham interventions. CONCLUSION: KT has demonstrated efficacy in reducing neck pain and improving cervical dysfunction among patients. Prolonged KT treatment or its combination with other therapeutic modalities may potentially enhance therapeutic outcomes. SYSTEMATIC REVIEW REGISTRATION: PROSPERO CRD42024524685.

Three-dimensional Mapping Analysis of Talus Fractures and Demonstration of Different Surgical Approaches for Talus Fractures.

OBJECTIVE: The talus is an important component in the ankle, and its treatment after injury is crucial. However, complications and adverse events due to incomplete traditional classifications may still occur, and these classifications fail to analyze the patterns and distribution of fractures from a three-dimensional perspective. Therefore, in this study, we aimed to analyze the location and distribution of fracture lines in different types of talus fractures using three-dimensional (3D) and heat mapping techniques. Additionally, we aimed to determine the surface area of the talus that can be utilized for different approaches of internal fixation, aiding in the planning of surgical procedures. METHODS: We retrospectively analyzed data from CT scans from 126 patients diagnosed with talus fractures at our two hospitals. We extracted the CT data of a healthy adult and created a standard talus model. We performed 3D reconstruction using patients' CT images and superimposed the fracture model onto the standard model for drawing fracture lines. Subsequently, we converted the fracture lines into a heat map for visualization. Additionally, we measured 20 specimens to determine the boundary for various ligaments attached to the talus. We determined the surface area of the talus available for different surgical approaches by integrating the boundary data with previously reported data on area of exposure. RESULTS: Without considering the displacement distance of the fracture, fracture types were classified as follows, by combining Hawkins and Sneppen classifications: talar neck, 41.3%; posterior talar tubercle, 22.2%; body for the talus and comminuted, 17.5%; lateral talar tubercle, 11.9%; and talar head, 7.1%. We established fracture line and heat maps using this classification. Additionally, we demonstrated the available area for anteromedial, anterolateral, posteromedial, posterolateral, and medial malleolus osteotomy and Chaput osteotomy approaches. CONCLUSION: Fracture line and heat map analyses can aid surgeons in planning a single or combined surgical approach for the reduction and internal fixation of talus fractures. Demonstrating the different surgical approaches can help surgeons choose the most effective technique for individual cases.

Chronic lateral ankle instability using anterior tibiofibular ligament distal fascicle transfer augmentation repair: an anatomical, biomechanical, and histological study.

Background: The transfer of the anterior tibiofibular ligament distal fascicle (ATiFL-DF) for the augmentation repair of the anterior talofibular ligament (ATFL) shows potential as a surgical technique. However, evidences on the benefits and disadvantages of this method in relation to ankle joint function are lacking. Purpose: This study aimed to provide comprehensive experimental data to validate the feasibility of ATiFL-DF transfer augmentation repair of the ATFL. Methods: This study included 50 embalmed ankle specimens to measure various morphological features, such as length, width, thickness, and angle, for evaluating similarities between the ATiFL-DF and ATFL. Furthermore, 24 fresh-frozen ankle specimens were examined for biomechanical testing of the ATiFL-DF transfer augmented repair of the ATFL. Finally, 12 pairs of ATiFL-DF and ATFL tissues from fresh-frozen ankle specimens were treated with gold chloride staining to analyze mechanoreceptor densities. Results: Anatomical studies found that the lengths and thicknesses of the ATFL and ATiFL-DF are similar. Biomechanical outcomes showed that performing ATiFL-DF transfer for ATFL repair can improve the stability of the talus and ankle joints. This is evident from the results of the anterior drawer, axial load, and ultimate failure load tests. However, performing ATiFL-DF transfer may compromise the stability of the distal tibiofibular joint, based on the Cotton and axial load tests at an external rotation of 5°. Analysis of the histological findings revealed that mechanoreceptor densities for four types of mechanoreceptors were comparable between the ATiFL-DF and ATFL groups. Conclusion: ATiFL-DF transfer is a viable method for augmenting ATFL repair. This technique helps to improve the stability of the talus and ankle joints while compensating for proprioception loss. Although ATiFL-DF transfer augmented repair of the ATFL may negatively affect the stability of the distal tibiofibular joint, this procedure can enhance the stability of the talus and ankle joints.

Immunomodulation Pathogenesis and Treatment of Bone Nonunion.

Fractures and bone nonunion commonly require surgical intervention. Serious outcomes of non-healing in the late stages of fracture place a significant financial burden on society and families. Bone nonunion occurs when a fracture stops healing, for many reasons, and leads to a variety of bad outcomes. Numerous factors, including biomechanics and immunology, are involved in the complicated mechanisms of bone nonunion. The immune-inflammatory response plays a significant part in the emergence of bone nonunion, and the occurrence, control, and remission of inflammation in the bone healing process have a significant influence on the ultimate success of bone tissue repair. In the bone microenvironment, immune cells and associated cytokines control bone repair, which is significantly influenced by macrophages, T cells, and fibroblast growth factor. To limit acute inflammation and  balance osteogenesis and osteoblastogenesis for tissue repair and regeneration, immune cells and various cytokines in the local microenvironment must be precisely regulated. As a bad complication of late-stage fractures, bone nonunion has a significant effect on patients' quality of life and socioeconomic development. Therefore, in-depth research on its pathogenesis and treatment methods has important clinical value. To provide more precise, focused therapeutic options for the treatment of bone nonunion, we discuss the regulatory roles of the key immune cells engaged in bone healing within the microenvironment during bone healing and their effect on osteogenesis.

In Vitro and In Vivo Evaluation of Lactoferrin-Modified Liposomal Etomidate with Enhanced Brain-Targeting Effect for General Anesthesia.

Etomidate is a general anesthetic that has shown good hemodynamic stability without significant cardiovascular or respiratory depression. Despite several kinds of dosage forms having been reported for this drug, formulation types are very limited in clinical practice, and brain-targeted formulations for this central nervous system (CNS) drug have been rarely reported. Moreover, studies on the biocompatibility, toxicity, and anesthetic effects of the etomidate preparations in vivo were inadequate. The present study was to develop lactoferrin-modified liposomal etomidate (Eto-lip-LF) for enhanced drug distribution in the brain and improved anesthetic effects. Eto-lip-LF had good stability for storage and hemocompatibility for intravenous injection. Compared with the non-lactoferrin-containing liposomes, the lactoferrin-modified liposomes had notably enhanced brain-targeting ability in vivo, which was probably realized by the binding of transferrin with the transferrin and lactoferrin receptors highly distributed in the brain. Eto-lip-LF had a therapeutic index of about 25.3, higher than that of many other general anesthetics. Moreover, compared with the commercial etomidate emulsion, Eto-lip-LF could better achieve rapid onset of general anesthesia and rapid recovery from anesthesia, probably due to the enhanced drug delivery to the brain. The above results demonstrated the potential of this lactoferrin-modified liposomal etomidate to become an alternative preparation for clinical general anesthesia.