Non-epitaxial single-crystal 2D material growth by geometric confinement.

Two-dimensional (2D) materials and their heterostructures show a promising path for next-generation electronics1-3. Nevertheless, 2D-based electronics have not been commercialized, owing mainly to three critical challenges: i) precise kinetic control of layer-by-layer 2D material growth, ii) maintaining a single domain during the growth, and iii) wafer-scale controllability of layer numbers and crystallinity. Here we introduce a deterministic, confined-growth technique that can tackle these three issues simultaneously, thus obtaining wafer-scale single-domain 2D monolayer arrays and their heterostructures on arbitrary substrates. We geometrically confine the growth of the first set of nuclei by defining a selective growth area via patterning SiO2 masks on two-inch substrates. Owing to substantial reduction of the growth duration at the micrometre-scale SiO2 trenches, we obtain wafer-scale single-domain monolayer WSe2 arrays on the arbitrary substrates by filling the trenches via short growth of the first set of nuclei, before the second set of nuclei is introduced, thus without requiring epitaxial seeding. Further growth of transition metal dichalcogenides with the same principle yields the formation of single-domain MoS2/WSe2 heterostructures. Our achievement will lay a strong foundation for 2D materials to fit into industrial settings.

Vertical full-colour micro-LEDs via 2D materials-based layer transfer.

Micro-LEDs (µLEDs) have been explored for augmented and virtual reality display applications that require extremely high pixels per inch and luminance1,2. However, conventional manufacturing processes based on the lateral assembly of red, green and blue (RGB) µLEDs have limitations in enhancing pixel density3-6. Recent demonstrations of vertical µLED displays have attempted to address this issue by stacking freestanding RGB LED membranes and fabricating top-down7-14, but minimization of the lateral dimensions of stacked µLEDs has been difficult. Here we report full-colour, vertically stacked µLEDs that achieve, to our knowledge, the highest array density (5,100 pixels per inch) and the smallest size (4 µm) reported to date. This is enabled by a two-dimensional materials-based layer transfer technique15-18 that allows the growth of RGB LEDs of near-submicron thickness on two-dimensional material-coated substrates via remote or van der Waals epitaxy, mechanical release and stacking of LEDs, followed by top-down fabrication. The smallest-ever stack height of around 9 µm is the key enabler for record high µLED array density. We also demonstrate vertical integration of blue µLEDs with silicon membrane transistors for active matrix operation. These results establish routes to creating full-colour µLED displays for augmented and virtual reality, while also offering a generalizable platform for broader classes of three-dimensional integrated devices.

Monolithic 3D integration of 2D materials-based electronics towards ultimate edge computing solutions.

Three-dimensional (3D) hetero-integration technology is poised to revolutionize the field of electronics by stacking functional layers vertically, thereby creating novel 3D circuity architectures with high integration density and unparalleled multifunctionality. However, the conventional 3D integration technique involves complex wafer processing and intricate interlayer wiring. Here we demonstrate monolithic 3D integration of two-dimensional, material-based artificial intelligence (AI)-processing hardware with ultimate integrability and multifunctionality. A total of six layers of transistor and memristor arrays were vertically integrated into a 3D nanosystem to perform AI tasks, by peeling and stacking of AI processing layers made from bottom-up synthesized two-dimensional materials. This fully monolithic-3D-integrated AI system substantially reduces processing time, voltage drops, latency and footprint due to its densely packed AI processing layers with dense interlayer connectivity. The successful demonstration of this monolithic-3D-integrated AI system will not only provide a material-level solution for hetero-integration of electronics, but also pave the way for unprecedented multifunctional computing hardware with ultimate parallelism.

Bioresorbable silicon electronic sensors for the brain.

Many procedures in modern clinical medicine rely on the use of electronic implants in treating conditions that range from acute coronary events to traumatic injury. However, standard permanent electronic hardware acts as a nidus for infection: bacteria form biofilms along percutaneous wires, or seed haematogenously, with the potential to migrate within the body and to provoke immune-mediated pathological tissue reactions. The associated surgical retrieval procedures, meanwhile, subject patients to the distress associated with re-operation and expose them to additional complications. Here, we report materials, device architectures, integration strategies, and in vivo demonstrations in rats of implantable, multifunctional silicon sensors for the brain, for which all of the constituent materials naturally resorb via hydrolysis and/or metabolic action, eliminating the need for extraction. Continuous monitoring of intracranial pressure and temperature illustrates functionality essential to the treatment of traumatic brain injury; the measurement performance of our resorbable devices compares favourably with that of non-resorbable clinical standards. In our experiments, insulated percutaneous wires connect to an externally mounted, miniaturized wireless potentiostat for data transmission. In a separate set-up, we connect a sensor to an implanted (but only partially resorbable) data-communication system, proving the principle that there is no need for any percutaneous wiring. The devices can be adapted to sense fluid flow, motion, pH or thermal characteristics, in formats that are compatible with the body's abdomen and extremities, as well as the deep brain, suggesting that the sensors might meet many needs in clinical medicine.

A zeolite family with expanding structural complexity and embedded isoreticular structures.

The prediction and synthesis of new crystal structures enable the targeted preparation of materials with desired properties. Among porous solids, this has been achieved for metal-organic frameworks, but not for the more widely applicable zeolites, where new materials are usually discovered using exploratory synthesis. Although millions of hypothetical zeolite structures have been proposed, not enough is known about their synthesis mechanism to allow any given structure to be prepared. Here we present an approach that combines structure solution with structure prediction, and inspires the targeted synthesis of new super-complex zeolites. We used electron diffraction to identify a family of related structures and to discover the structural 'coding' within them. This allowed us to determine the complex, and previously unknown, structure of zeolite ZSM-25 (ref. 8), which has the largest unit-cell volume of all known zeolites (91,554 cubic ångströms) and demonstrates selective CO2 adsorption. By extending our method, we were able to predict other members of a family of increasingly complex, but structurally related, zeolites and to synthesize two more-complex zeolites in the family, PST-20 and PST-25, with much larger cell volumes (166,988 and 275,178 cubic ångströms, respectively) and similar selective adsorption properties. Members of this family have the same symmetry, but an expanding unit cell, and are related by hitherto unrecognized structural principles; we call these family members embedded isoreticular zeolite structures.

An Aluminosilicate Zeolite Containing Rings of Tetrahedral Atoms with All Odd Numbers from Five to Eleven.

Herein we report the synthesis, structure solution, and catalytic properties of PST-31, which has an unprecedented framework topology. This high-silica (Si/Al=16) zeolite was synthesized using a pyrazolium-based dication with a tetramethylene linker as an organic structure-directing agent (OSDA) in hydroxide media. The PST-31 structure is built from new building layers containing four-, five-, six-, and seven-membered rings, which are connected by single four-membered rings in the interlayer region to form a two-dimensional pore system. Its channels consist of [4.56 .6.9.11] and [5.6.7.9.10.11] cavities and are thus delimited by nine-, ten-, and eleven-membered rings. The OSDA cations in as-synthesized PST-31 were determined to reside without disorder in the large [42 .514 .64 .72 .94 ] cavities composed of smaller [4.56 .6.9.11] and [5.6.7.9.10.11] ones, leading to a symmetry coincidence between the OSDA and the surrounding zeolite cavity. The proton form of PST-31 was found to be selective for the cracking of n-hexane to light olefins.

Rediscovery of the Importance of Inorganic Synthesis Parameters in the Search for New Zeolites.

Zeolites and related crystalline microporous materials with cavities and channels of molecular dimensions are of major importance for applications ranging from ion-exchange to adsorption and to catalysis. Because their unique shape-selective properties are closely related to the size, shape, and dimensionality of the intracrystalline channels and cavities, much interest has been devoted to the discovery of novel zeolitic materials over the last several decades. As a result, a dramatic expansion in the structural domain of crystalline microporous materials, as well as in their compositional range, has been achieved. This is largely due to the development of innovative synthetic strategies, for example, organic structure-directing agent (OSDA) design, introduction of heteroatoms like Ge in OSDA-mediated zeolite synthesis, topotactic transformation of two-dimensional layered zeolite precursors, assembly-disassembly-organization-reassembly method, etc. However, although many of these methodologies are quite successful in finding unprecedented zeolite structures, the resulting materials tend to be (hydro)thermally unstable and are often commercially impractical from a manufacturing perspective because of the high cost of the OSDA and/or heteroatom employed. Therefore, we focused on inorganic synthesis parameters as the key phase selectivity factor that has received relatively little attention in the search for new industrially relevant zeolites. This Account describes our recent efforts to find previously undiscovered aluminosilicate zeolites by boosting the roles of inorganic structure-directing agents (ISDAs) in the presence of OSDAs. They include the multiple inorganic cation and excess fluoride approaches, which aim to promote a synergistic cooperation between ISDAs and/or OSDAs and thus to hold a rational design concept, although the latter is not friendly to the practical zeolite manufacturing process due to the toxicity of fluoride. Using these two approaches, we were able to synthesize not only the second generation (PST-29) and four higher generations (PST-20 (RHO-G5), PST-25 (RHO-G6), PST-26 (RHO-G7), and PST-28 (RHO-G8)) of the RHO family of embedded isoreticular zeolites but also three other novel zeolite structures (EU-12, PST-21, and PST-22). We also explored the synthesis of a number of heteroatom-containing aluminophosphate (AlPO4) molecular sieves with different framework structures and unusually high framework charge density through the cooperative structure direction of alkali metal and small OSDA cations or under wholly inorganic conditions. Although we need to clarify the nature and extent of interactions between the inorganic cations and framework components in synthesis mixtures, we believe that our synthetic concepts, shedding new light on the importance of inorganic synthesis parameters, will open a door for achieving many other novel zeolite structures and compositions.

Soft, Skin-Interfaced Microfluidic Systems with Wireless, Battery-Free Electronics for Digital, Real-Time Tracking of Sweat Loss and Electrolyte Composition.

Sweat excretion is a dynamic physiological process that varies with body position, activity level, environmental factors, and health status. Conventional means for measuring the properties of sweat yield accurate results but their requirements for sampling and analytics do not allow for use in the field. Emerging wearable devices offer significant advantages over existing approaches, but each has significant drawbacks associated with bulk and weight, inability to quantify volumetric sweat rate and loss, robustness, and/or inadequate accuracy in biochemical analysis. This paper presents a thin, miniaturized, skin-interfaced microfluidic technology that includes a reusable, battery-free electronics module for measuring sweat conductivity and rate in real-time using wireless power from and data communication to electronic devices with capabilities in near field communications (NFC), including most smartphones. The platform exploits ultrathin electrodes integrated within a collection of microchannels as interfaces to circuits that leverage NFC protocols. The resulting capabilities are complementary to those of previously reported colorimetric strategies. Systematic studies of these combined microfluidic/electronic systems, accurate correlations of measurements performed with them to those of laboratory standard instrumentation, and field tests on human subjects exercising and at rest establish the key operational features and their utility in sweat analytics.

A Zeolite Family Nonjointly Built from the 1,3-Stellated Cubic Building Unit.

From a technological point of view, the synthesis of new high-silica zeolites is of prime importance owing to their high potential as industrial catalysts and catalyst supports. Two such materials have been synthesized which are made up of the 1,3-stellated cubic unit (hexahedral ([42 54 ]) bre unit) as a secondary building unit, with the aid of existing imidazolium-based structure-directing agents under "excess fluoride" conditions. One of them, denoted PST-21, is the first aluminosilicate zeolite consisting of 9-ring apertures solely; it displays exceptional activity towards steering the skeletal isomerization of 1-butene to isobutene and bridges the gap between small- and medium-pore structures. A series of hypothetical structures are also described that are nonjointly built from the bre unit; all of these structures are chemically feasible and will thus be helpful in designing the synthesis of novel zeolites containing 9-ring and/or 10-ring channels.

Two Aluminophosphate Molecular Sieves Built from Pairs of Enantiomeric Structural Building Units.

Herein we report the synthesis and structures of two new small-pore aluminophosphate molecular sieves PST-13 and PST-14 with mutually connected 8-ring channels. The structure of PST-13, synthesized using diethylamine as an organic structure-directing agent, contains penta-coordinated framework Al atoms bridged by hydroxy groups and thus edge-sharing 3- and 5-rings. Upon calcination, PST-13 undergoes a transformation to PST-14 with loss of bridging hydroxy groups and occluded organic species. The structures of both materials consist "nonjointly" of pairs of previously undiscovered 1,5- and 1,6-open double 4-rings (d4rs) which are mirror images of each other. We also present a series of novel chemically feasible hypothetical structures built from 1-open d4r (sti) or 1,3-open d4r (nsc) units, as well as from these two enantiomeric structural building units.

Embedded Isoreticular Zeolites: Concept and Beyond.

The structure solution, prediction, and targeted synthesis of a family of embedded isoreticular zeolites (EIZs) with expanding structural complexity, denoted the RHO family, were reported recently. Here, the naming and building rules of body-centered cubic EIZs with the lta cage as the lattice point are presented. The rearrangement of a pair of pau and d8r cages between two lta cages and its repetitive insertion, combined with the strong reflections and fragment methods, allows the creation of three other new zeolite families, designated the HPO, RHO(b), and KFI families. Among them, the KFI family is found to be the only EIZ family, on the basis of the similarity of structure factor amplitudes and phases of strong reflections, that is, structural coding, within its family members. The structural credibility of this family is confirmed by both local interatomic distances and T-T-T angle analyses. The existence of tetragonal EIZ families is also demonstrated. The overall results provide useful insights into the prediction of unprecedented EIZ families.

Modeling short-range substitution order and disorder in crystals: Application to the Ga/Si distribution in a natrolite zeolite.

Atomic substitutions are a central feature of the physicochemical properties of an increasing number of solid-state materials. The complexity that this chemical disorder locally generates in otherwise crystalline solids poses a major challenge to the understanding of the relationships between the structure and properties of materials at the atomic and molecular level. Strategies designed to efficiently explore the ensemble of local chemical environments present in disordered crystals and predict their signatures in local spectroscopies such as solid-state nuclear magnetic resonance (NMR) are therefore essential. Focusing on the Ga/Si disorder in the framework of rubidium-exchanged gallosilicate natrolite zeolite (Rb-PST-1) with a high Ga content (SiGa=1.28), we show how the structure-generation approach implemented in the new program supercell (Okhotnikov et al. [26]) provides an excellent basis for the understanding of complex experimental spectroscopic data. Furthermore, we describe how exhaustive explorations of atomic configurations can be performed to seek local structural ordering and/or disordering factors. In the case of Rb-PST-1, we more specifically explore the possibility to form and to detect the presence of thermodynamically unfavorable Ga-O-Ga connectivities. While particularly adapted to the description of dense materials, we demonstrate that this approach may successfully be used to reproduce and interpret the distributions of local structural distortions (i.e., the geometrical disorder) resulting from the chemical disorder in systems as complex as microporous zeolites.

Impact of control of blood glucose level during treatment of sudden deafness in diabetics: relationship with prognosis.

The objective of this study is to investigate the impact of control of blood glucose level during treatment of sudden deafness. A retrospective study was performed involving 197 patients from January, 2011 to September, 2015. All patients were administrated prednisolone (Pharmaprednisolone tab®, 5 mg/T; KoreaPharma) p.o under the following regimen: 60 mg/day for 4 days, 40 mg/day for 2 days, 30 mg/day for 1 day, 20 mg/day for 1 day, and 10 mg/day for 2 days. During treatment, pure tone audiometry and blood glucose level were investigated for each patient and the results were statistically analyzed. Mean hearing improvement was 19.2 dB for the non-diabetes group and 24.8 dB for the diabetes group. The greater improvement for diabetics was not statistically significant (p = 0.146). Hearing improvement was 25.1 dB for subjects with mean blood glucose <200 mg/dl and 24.6 dB for subjects with mean blood glucose >200 mg/dl; the difference was not statistically significant (p = 0.267). Mean blood glucose level was 200.8 mg/dl for subjects with hearing improvement >20 dB and 181.8 mg/dl for subjects with hearing improvement <20 dB; the difference was not statistically significant (p = 0.286). Control of blood glucose level during treatment of sudden deafness does not have a direct effect on prognosis.

Biodegradable elastomers and silicon nanomembranes/nanoribbons for stretchable, transient electronics, and biosensors.

Transient electronics represents an emerging class of technology that exploits materials and/or device constructs that are capable of physically disappearing or disintegrating in a controlled manner at programmed rates or times. Inorganic semiconductor nanomaterials such as silicon nanomembranes/nanoribbons provide attractive choices for active elements in transistors, diodes and other essential components of overall systems that dissolve completely by hydrolysis in biofluids or groundwater. We describe here materials, mechanics, and design layouts to achieve this type of technology in stretchable configurations with biodegradable elastomers for substrate/encapsulation layers. Experimental and theoretical results illuminate the mechanical properties under large strain deformation. Circuit characterization of complementary metal-oxide-semiconductor inverters and individual transistors under various levels of applied loads validates the design strategies. Examples of biosensors demonstrate possibilities for stretchable, transient devices in biomedical applications.

Targeted Synthesis of Two Super-Complex Zeolites with Embedded Isoreticular Structures.

A novel structural coding approach combining structure solution, prediction, and the targeted synthesis of new zeolites with expanding complexity and embedded isoreticular structures was recently proposed. Using this approach, the structures of two new zeolites in the RHO family, PST-20 and PST-25, were predicted and synthesized. Herein, by extending this approach, the next two higher generation members of this family, PST-26 and PST-28, have been predicted and synthesized. These two zeolites have much larger unit cell volumes (422,655 Å(3) and 614,912 Å(3), respectively) than those of the lower generations. Their crystallization was confirmed by a combination of both powder X-ray and electron diffraction techniques. Aluminate and water concentrations in the synthetic mixture were found to be the two most critical factors influencing the structural expansion of embedded isoreticular zeolites under the synthetic conditions studied herein.

A family of molecular sieves containing framework-bound organic structure-directing agents.

Organic structure-directing agents (OSDAs), such as quaternary ammonium cations and amines, used in the synthesis of zeolites and related crystalline microporous oxides usually end up entrapped inside the void spaces of the crystallized inorganic host lattice. But none of them is known to form direct chemical bonds to the framework of these industrially important catalysts and adsorbents. We demonstrate that ECR-40, currently regarded as a typical silicoaluminophosphate molecular sieve, constitutes instead a new family of inorganic-organic hybrid networks in which the OSDAs are covalently bonded to the inorganic framework. ECR-40 crystallization begins with the formation of an Al-OSDA complex in the liquid phase in which the Al is octahedrally coordinated. This unit is incorporated in the crystallizing ECR-40. Subsequent removal of framework-bound OSDAs generates Al-O-Al linkages in a fully tetrahedrally coordinated framework.

Intraframework migration of tetrahedral atoms in a zeolite.

The transformation from a disordered into an ordered version of the zeolite natrolite occurs on prolonged heating of this material in the crystallizing medium, but not if the mother liquor is replaced by water or an alkaline solution. This process occurs for both aluminosilicate and gallosilicate analogues of natrolite. In cross experiments, the disordered Al-containing (or Ga-containing) analogue is heated while in contact with the mother liquor of the opposite analogue, that is, the Ga-containing (or Al-containing) liquor. Therefore, strong evidence for the mechanism of the ordering process was obtained, which was thus proposed to proceed by intraframework migration of tetrahedral atoms without diffusion along the pores. Migration is first triggered, then fuelled by surface rearrangement through reactions with the mother liquor, and stops when an almost fully ordered state is attained. Classical dissolution-recrystallization and Ostwald ripening processes do not appear to be relevant for this phase transformation.

Position error-free control of magnetic domain-wall devices via spin-orbit torque modulation.

Magnetic domain-wall devices such as racetrack memory and domain-wall shift registers facilitate massive data storage as hard disk drives with low power portability as flash memory devices. The key issue to be addressed is how perfectly the domain-wall motion can be controlled without deformation, as it can replace the mechanical motion of hard disk drives. However, such domain-wall motion in real media is subject to the stochasticity of thermal agitation with quenched disorders, resulting in severe deformations with pinning and tilting. To sort out the problem, we propose and demonstrate a new concept of domain-wall control with a position error-free scheme. The primary idea involves spatial modulation of the spin-orbit torque along nanotrack devices, where the boundary of modulation possesses broken inversion symmetry. In this work, by showing the unidirectional motion of domain wall with position-error free manner, we provide an important missing piece in magnetic domain-wall device development.

Cortical neuroanatomical changes related to specific language impairments in primary progressive aphasia.

Objective: Language function test-specific neural substrates in Korean patients with primary progressive aphasia (PPA) might differ from those in other causes of dementia and English-speaking PPA patients. We investigated the correlation between language performance tests and cortical thickness to determine neural substrates in Korean patients with PPA. Materials and methods: Ninety-six patients with PPA were recruited from the memory clinic. To acquire neural substrates, we performed linear regression using the scores of each language test as a predictor, cortical thickness as an outcome and age, sex, years of education, and intracranial volume as confounders. Results: Poor performance in each language function test was associated with lower cortical thickness in specific cortical regions: (1) object naming and the bilateral anterior to mid-portion of the lateral temporal and basal temporal regions; (2) semantic generative naming and the bilateral anterior to mid-portion of the lateral temporal and basal temporal regions; (3) phonemic generative naming and the left prefrontal and inferior parietal regions; and (4) comprehension and the left posterior portion of the superior and middle temporal regions. In particular, the neural substrates of the semantic generative naming test in PPA patients, left anterior to mid-portion of the lateral and basal temporal regions, quite differed from those in patients with other causes of dementia. Conclusion: Our findings provide a better understanding of the different pathomechanisms for language impairments among PPA patients from those with other causes of dementia.

Graphene nanopattern as a universal epitaxy platform for single-crystal membrane production and defect reduction.

Heterogeneous integration of single-crystal materials offers great opportunities for advanced device platforms and functional systems1. Although substantial efforts have been made to co-integrate active device layers by heteroepitaxy, the mismatch in lattice polarity and lattice constants has been limiting the quality of the grown materials2. Layer transfer methods as an alternative approach, on the other hand, suffer from the limited availability of transferrable materials and transfer-process-related obstacles3. Here, we introduce graphene nanopatterns as an advanced heterointegration platform that allows the creation of a broad spectrum of freestanding single-crystalline membranes with substantially reduced defects, ranging from non-polar materials to polar materials and from low-bandgap to high-bandgap semiconductors. Additionally, we unveil unique mechanisms to substantially reduce crystallographic defects such as misfit dislocations, threading dislocations and antiphase boundaries in lattice- and polarity-mismatched heteroepitaxial systems, owing to the flexibility and chemical inertness of graphene nanopatterns. More importantly, we develop a comprehensive mechanics theory to precisely guide cracks through the graphene layer, and demonstrate the successful exfoliation of any epitaxial overlayers grown on the graphene nanopatterns. Thus, this approach has the potential to revolutionize the heterogeneous integration of dissimilar materials by widening the choice of materials and offering flexibility in designing heterointegrated systems.