Analysis of Silicon Quantum Dots and Serum Proteins Interactions Using Asymmetrical Flow Field-Flow Fractionation.

Semiconductor nanocrystals or quantum dots (QDs) have gained significant attention in biomedical research as versatile probes for imaging, sensing, and therapies. However, the interactions between proteins and QDs, which are crucial for their use in biological applications, are not yet fully understood. Asymmetric flow field-flow fractionation (AF4) is a promising method for analyzing the interactions of proteins with QDs. This technique uses a combination of hydrodynamic and centrifugal forces to separate and fractionate particles based on their size and shape. By coupling AF4 with other techniques, such as fluorescence spectroscopy and multi-angle light scattering, it is possible to determine the binding affinity and stoichiometry of protein-QD interactions. Herein, this approach has been utilized to determine the interaction between fetal bovine serum (FBS) and silicon quantum dots (SiQDs). Unlike metal-containing conventional QDs, SiQDs are highly biocompatible and photostable in nature, making them attractive for a wide range of biomedical applications. In this study, AF4 has provided crucial information on the size and shape of the FBS/SiQD complexes, their elution profile, and their interaction with serum components in real time. The differential scanning microcalorimetric technique has also been employed to monitor the thermodynamic behavior of proteins in the presence of SiQDs. We have investigated their binding mechanisms by incubating them at temperatures below and above the protein denaturation. This study yields various significant characteristics such as their hydrodynamic radius, size distribution, and conformational behavior. The compositions of SiQD and FBS influence the size distribution of their bioconjugates; the size increases by intensifying the concentration of FBS, with their hydrodynamic radii ranging between 150 and 300 nm. The results signify that in the alliance of SiQDs to the system, there is an augmentation of the denaturation point of the proteins and hence their thermal stability, providing a more comprehensive understanding of the interactions between FBS and QDs.

Highly efficient, self-powered UV photodiodes based on leadfree perovskite nanocrystals through interfacial engineering.

Double perovskite crystals are promising alternatives for lead-based perovskites that has potential to address toxicity and instability issues. In this study, Cs2AgBiCl6nanocrystals (NCs) with high absorption coefficients were synthesized by hot-injection method. The bandgap engineering was realized by tuning the halide composition in Cs2AgBiCl6to Cs2AgBiBr6. Both NCs were used as light-absorbing layers in lead-free perovskite photodiodes that exhibit wavelength-selectivity for UV-visible light operatable even at a bias voltage of 0 V. Cs2AgBiBr6-based photodiode exhibits a characteristic detection peak at 340 nm with a responsivity of 3.21 mA W-1, a specific detectivity up to 8.91 × 1010Jones and a fast response speed with a rise/fall time of 30/35 ms. The excellent performance of self-driven photodiodes lights up the prospect of lead-free perovskite NCs in highly efficient optoelectronic devices.

Photosensitizer Encryption with Aggregation Enhanced Singlet Oxygen Production.

Chromophores that generate singlet oxygen (1O2) in water are essential to developing noninvasive disease treatments using photodynamic therapy (PDT). A facile approach for formation of stable colloidal nanoparticles of 1O2 photosensitizers, which exhibit aggregation enhanced 1O2 generation in water toward applications as PDT agents, is reported. Chromophore encryption within a fuchsonarene macrocyclic scaffold insulates the photosensitizer from aggregation induced deactivation pathways, enabling a higher chromophore density than typical 1O2 generating nanoparticles. Aggregation enhanced 1O2 generation in water is observed, and variation in molecular structure allows for regulation of the physical properties of the nanoparticles which ultimately affects the 1O2 generation. In vitro activity and the ability of the particles to pass through the cell membrane into the cytoplasm is demonstrated using confocal fluorescence microscopy with HeLa cells. Photosensitizer encryption in rigid macrocycles, such as fuchsonarenes, offers new prospects for the production of biocompatible nanoarchitectures for applications involving 1O2 generation.

Water-Soluble Silicon Quantum Dots toward Fluorescence-Guided Photothermal Nanotherapy.

We report carboxy-terminated silicon quantum dots (SiQDs) that exhibit high solubility in water due to the high molecular coverage of surface monolayers, bright light emission with high photoluminescence quantum yields (PLQYs), long-term stability in the PL property for monitoring cells, less toxicity to the cells, and a high photothermal response. We prepared water-soluble SiQDs by the thermal hydrosilylation of 10-undecenoic acid on their hydrogen-terminated surfaces, provided by the thermal disproportionation of triethoxysilane hydrolyzed at pH 3 and subsequent hydrofluoric etching. The 10-undecanoic acid-functionalized SiQDs (UA:SiQDs) showed long-term stability in hydrophilic solvents including ethanol and water (pH 7). We assess their interaction with live cells by means of cellular uptake, short-term toxicity, and, for the first time, long-term cytotoxicity. Results show that UA:SiQDs are potential candidates for theranostics, with their good optical properties enabling imaging for more than 18 days and a photothermal response having a 25.1% photothermal conversion efficiency together with the direct evidence of cell death by laser irradiation. UA:SiQDs have low cytotoxicity with full viability of up to 400 µg/mL for the short term and a 50% cell viability value after 14 days of incubation at a 50 µg/mL concentration.

Generating Lifetime-Enhanced Microbubbles by Decorating Shells with Silicon Quantum Nano-Dots Using a 3-Series T-Junction Microfluidic Device.

Long-term stability of microbubbles is crucial to their effectiveness. Using a new microfluidic device connecting three T-junction channels of 100 µm in series, stable monodisperse SiQD-loaded bovine serum albumin (BSA) protein microbubbles down to 22.8 ± 1.4 µm in diameter were generated. Fluorescence microscopy confirmed the integration of SiQD on the microbubble surface, which retained the same morphology as those without SiQD. The microbubble diameter and stability in air were manipulated through appropriate selection of T-junction numbers, capillary diameter, liquid flow rate, and BSA and SiQD concentrations. A predictive computational model was developed from the experimental data, and the number of T-junctions was incorporated into this model as one of the variables. It was illustrated that the diameter of the monodisperse microbubbles generated can be tailored by combining up to three T-junctions in series, while the operating parameters were kept constant. Computational modeling of microbubble diameter and stability agreed with experimental data. The lifetime of microbubbles increased with increasing T-junction number and higher concentrations of BSA and SiQD. The present research sheds light on a potential new route employing SiQD and triple T-junctions to form stable, monodisperse, multi-layered, and well-characterized protein and quantum dot-loaded protein microbubbles with enhanced stability for the first time.

Theory-Guided Synthesis of Highly Luminescent Colloidal Cesium Tin Halide Perovskite Nanocrystals.

The synthesis of highly luminescent colloidal CsSnX3 (X = halogen) perovskite nanocrystals (NCs) remains a long-standing challenge due to the lack of a fundamental understanding of how to rationally suppress the formation of structural defects that significantly influence the radiative carrier recombination processes. Here, we develop a theory-guided, general synthetic concept for highly luminescent CsSnX3 NCs. Guided by density functional theory calculations and molecular dynamics simulations, we predict that, although there is an opposing trend in the chemical potential-dependent formation energies of various defects, highly luminescent CsSnI3 NCs with narrow emission could be obtained through decreasing the density of tin vacancies. We then develop a colloidal synthesis strategy that allows for rational fine-tuning of the reactant ratio in a wide range but still leads to the formation of CsSnI3 NCs. By judiciously adopting a tin-rich reaction condition, we obtain narrow-band-emissive CsSnI3 NCs with a record emission quantum yield of 18.4%, which is over 50 times larger than those previously reported. Systematic surface-state characterizations reveal that these NCs possess a Cs/I-lean surface and are capped with a low density of organic ligands, making them an excellent candidate for optoelectronic devices without any postsynthesis ligand management. We showcase the generalizability of our concept by further demonstrating the synthesis of highly luminescent CsSnI2.5Br0.5 and CsSnI2.25Br0.75 NCs. Our findings not only highlight the value of computation in guiding the synthesis of high-quality colloidal perovskite NCs but also could stimulate intense efforts on tin-based perovskite NCs and accelerate their potential applications in a range of high-performance optoelectronic devices.

Emerging Atomic Energy Levels in Zero-Dimensional Silicon Quantum Dots.

Driven by the emergence of colloidal semiconductor quantum dots (QDs) of tunable emission wavelengths, characteristic of exciton absorption peaks, outstanding photostability and solution processability in device fabrication have become a key tool in the development of nanomedicine and optoelectronics. Diamond cubic crystalline silicon (Si) QDs, with a diameter larger than 2 nm, terminated with hydrogen atoms are known to exhibit bulk-inherited spin and valley properties. Herein, we demonstrate a newly discovered size region of Si QDs, in which a fast radiative recombination on the order of hundreds of picoseconds is responsible for photoluminescence (PL). Despite retaining a crystallographic structure like the bulk, controlling their diameters in the 1.1-1.7 nm range realizes the strong PL with continuous spectral tunability in the 530-580 nm window, the narrow spectral line widths without emission tails, and the fast relaxation of photogenerated carriers. In contrast, QDs with diameters greater than 1.8 nm display the decay times on the microsecond order as well as the previous Si QDs. In addition to the five-orders-of-magnitude variation in the PL decay time, a systematic study on the temperature dependence of PL properties suggests that the energy structure of the smaller QDs does not retain an indirect band gap character. It is discussed that a 1.7 nm diameter is critical to undergo changes in energy structure from bulky to molecular configurations.

Recent advances on fluorescent biomarkers of near-infrared quantum dots for in vitro and in vivo imaging.

Luminescence probe has been broadly used for bio-imaging applications. Among them, near-infrared (NIR) quantum dots (QDs) are more attractive due to minimal tissue absorbance and larger penetration depth. Above said reasons allowed whole animal imaging without slice scan or dissection. This review describes in vitro and in vivo imaging of NIR QDs in the regions of 650-900 nm (NIR-I) and 1000-1450 nm (NIR-II). Also, we summarize the recent progress in bio-imaging and discuss the future trends of NIR QDs including group II-VI, IV-VI, I-VI, I-III-VI, III-V, and IV semiconductors.

Transition-Metal-Doped NIR-Emitting Silicon Nanocrystals.

Impurity-doping in nanocrystals significantly affects their electronic properties and diversifies their applications. Herein, we report the synthesis of transition metal (Mn, Ni, Co, Cu)-doped oleophilic silicon nanocrystals (SiNCs) through hydrolysis/polymerization of triethoxysilane with acidic aqueous metal salt solutions, followed by thermal disproportionation of the resulting gel into a doped-Si/SiO2 composite that, upon HF etching and hydrosilylation with 1-n-octadecene, produces free-standing octadecyl-capped doped SiNCs (diameter≈3 to 8 nm; dopant <0.2 atom %). Metal-doping triggers a red-shift of the SiNC photoluminescence (PL) of up to 270 nm, while maintaining high PL quantum yield (26 % for Co doping).

Formation and optical properties of fluorescent gold nanoparticles obtained by matrix sputtering method with volatile mercaptan molecules in the vacuum chamber and consideration of their structures.

This paper proposes a novel methodology to synthesize highly fluorescent gold nanoparticles (NPs) with a maximum quantum yield of 16%, in the near-infrared (IR) region. This work discusses the results of using our (previously developed) matrix sputtering method to introduce mercaptan molecules, α-thioglycerol, inside the vacuum sputtering chamber, during the synthesis of metal NPs. The evaporation of α-thioglycerol inside the chamber enables to coordinate to the "nucleation stage" very small gold nanoclusters in the gas phase, thus retaining their photophysical characteristics. As observed through transmission electron microscopy, the size of the Au NPs obtained with the addition of α-thioglycerol varied from approximately 2-3 nm to approximately 5 nm. Plasmon absorption varied with the size of the resultant nanoparticles. Thus, plasmon absorption was observed at 2.4 eV in the larger NPs. However, it was not observed, and instead a new peak was found at approximately 3.4 eV, in the smaller NPs that resulted from the introduction of α-thioglycerol. The Au NPs stabilized by the α-thioglycerol fluoresced at approximately 1.8 eV, and the maximum wavelength shifted toward the red, in accordance with the size of the NPs. A maximum fluorescent quantum yield of 16% was realized under the optimum conditions, and this value is extremely high compared to values previously reported on gold NPs and clusters (generally ∼1%). To our knowledge, however, Au NPs of size >2 nm usually do not show strong fluorescence. By comparison with results reported in previous literature, it was concluded that these highly fluorescent Au NPs consist of gold-mercaptan complexes. The novel method presented in this paper therefore opens a new door for the effective control of size, photophysical characteristics, and structure of metal NPs. It is hoped that this research contributes significantly to the science in this field.

Monolayer formation of luminescent germanium nanoparticles on silica surface in aqueous buffer solution.

The present paper reports monolayer formation of germanium nanoparticles (Ge NPs) on silica substrate. The NPs were prepared by hydride reduction of GeCl4, which is encapsulated with an inverse micelle of dimethyldioctylammonium bromide, with lithium aluminum hydride, and subsequent hydrogermylation of allylamine in the presence of platinum catalyst. The resultant NPs showed the blue photoluminescence property. Due to the terminal amine, the NPs were soluble highly in aqueous buffer solution. To fabricate a monolayer of Ge NPs, the chemical reactivity of the NPs was studied using a multi-functional microarray in which different kinds of siloxane monolayers were periodically aligned on a silica substrate. We observed using fluorescence microscope whether the terminal amines of the NPs recognize the specific monolayers in the microarray. In terms of fluorescence observation, the entire surface of the monolayer-covered microsize-domains emits uniformly the blue light. This suggests a high degree of coverage of the luminescent NPs covering over the monolayer regions in the microarray, and implies the non-occurrence of quenching through energy transfer between adjacent NPs.

Reductant-free colloidal synthesis of near-IR emitting germanium nanocrystals: role of primary amine.

High temperature colloidal synthesis without using hazardous reducing agent is demonstrated here to develop a straight forward pathway for synthesizing near-IR (NIR) light emitting germanium nanocrystals (Ge NCs). The NCs were prepared by heating a mixture of germanium (II) iodide and organoamine. This article presents an important role of the primary amine which serves as a reducing agent as well as an inhibitor against oxidation by comparing with the tertiary amine. Interestingly, the difference in chemical reactivity between each amine causes the difference in major structural phase of the products. An efficient route to produce NIR light emitting Ge NCs is demonstrated.

Colloidal silicon quantum dots: synthesis and luminescence tuning from the near-UV to the near-IR range.

This review describes a series of representative synthesis processes, which have been developed in the last two decades to prepare silicon quantum dots (QDs). The methods include both top-down and bottom-up approaches, and their methodological advantages and disadvantages are presented. Considerable efforts in surface functionalization of QDs have categorized it into (i) a two-step process and (ii) in situ surface derivatization. Photophysical properties of QDs are summarized to highlight the continuous tuning of photoluminescence color from the near-UV through visible to the near-IR range. The emission features strongly depend on the silicon nanostructures including QD surface configurations. Possible mechanisms of photoluminescence have been summarized to ascertain the future challenges toward industrial use of silicon-based light emitters.

Rational ligand design for enhanced carrier mobility in self-powered SWIR photodiodes based on colloidal InSb quantum dots.

Solution-processed colloidal III-V semiconductor quantum dot photodiodes (QPDs) have potential applications in short-wavelength infrared (SWIR) imaging due to their tunable spectral response range, possible multiple-exciton generation, operation at 0-V bias voltage and low-cost fabrication and are also expected to replace lead- and mercury-based counterparts that are hampered by reliance on restricted elements (RoHS). However, the use of III-V CQDs as photoactive layers in SWIR optoelectronic applications is still a challenge because of underdeveloped ligand engineering for improving the in-plane conductivity of the QD assembled films. Here, we report on ligand engineering of InSb CQDs to enhance the optical response performance of self-powered SWIR QPDs. Specifically, by replacing the conventional ligand (i.e., oleylamine) with sulfide, the interparticle distance between the CQDs was shortened from 5.0 ± 0.5 nm to 1.5 ± 0.5 nm, leading to improved carrier mobility for high photoresponse speed to SWIR light. Furthermore, the use of sulfide ligands resulted in a low dark current density (∼nA cm-2) with an improved EQE of 18.5%, suggesting their potential use in toxic-based infrared image sensors.

Rational design of adjuvants boosts cancer vaccines.

Cancer vaccines are expected to be next breakthrough in cancer immunotherapy. In cancer vaccines, adjuvants play an important role by enhancing and reshaping tumor antigen-specific immune responses. Failures in previous cancer vaccine clinical trials can be attributed to inappropriate selection and design of tumor antigens and adjuvants. Using basic theories of tumor immunology, the development of sequencing technology and nanotechnology enables the creation of cancer vaccines through appropriate selection of tumor antigens and adjuvants and their nanoscale assembly based on the specific characteristics of each tumor. In this chapter, we begin by discussing the various types of cancer vaccines and categories of tumor antigens. Then, we summarize the classification of adjuvants for cancer vaccines, including immunostimulatory molecules and delivery systems, and clarify the various factors that influence the properties of adjuvants, such as chemical composition, structure, and surface modification. Finally, we provide perspectives and insights on rational design of adjuvants in cancer vaccines to enhance their efficacy.

Synergistic Effects of Metal-Organic Nanoplatform and Guanine Quadruplex-Based CpG Oligodeoxynucleotides in Therapeutic Cancer Vaccines with Different Tumor Antigens.

Oligodeoxynucleotides (ODNs) containing unmethylated cytosine-phosphate-guanosine (CpG) motifs are readily recognized by Toll-like receptor 9 on immune cells, trigger an immunomodulatory cascade, induce a Th1 -biased immune milieu, and have great potential as an adjuvant in cancer vaccines. In this study, a green one-step synthesis process was adopted to prepare an amino-rich metal-organic nanoplatform (FN). The synthesized FN nanoplatform can simultaneously and effectively load model tumor antigens (OVA)/autologous tumor antigens (dLLC) and immunostimulatory CpG ODNs with an unmodified PD backbone and a guanine quadruplex structure to obtain various cancer vaccines. The FN nanoplatform and immunostimulatory CpG ODNs generate synergistic effects to enhance the immunogenicity of different antigens and inhibit the growth of established and distant tumors in both the murine E.G7-OVA lymphoma model and the murine Lewis lung carcinoma model. In the E.G7-OVA lymphoma model, vaccination efficiently increases the CD4+, CD8+, and tetramer+CD8+ T cell populations in the spleens. In the Lewis lung carcinoma model, vaccination efficiently increases the CD3+CD4+ and CD3+CD8+ T cell populations in the spleens and CD3+CD8+, CD3-CD8+, and CD11b+CD80+ cell populations in the tumors, suggesting the alteration of tumor microenvironments from cold to hot tumors.

Surface charge-dependent cytokine production using near-infrared emitting silicon quantum dots.

Toll-like receptor 9 (TLR-9) is a protein that helps our immune system identify specific DNA types. Upon detection, CpG oligodeoxynucleotides signal the immune system to generate cytokines, essential proteins that contribute to the body's defence against infectious diseases. Native phosphodiester type B CpG ODNs induce only Interleukin-6 with no effect on interferon-α. We prepared silicon quantum dots containing different surface charges, such as positive, negative, and neutral, using amine, acrylate-modified Plouronic F-127, and Plouronic F-127. Then, class B CpG ODNs are loaded on the surface of the prepared SiQDs. The uptake of ODNs varies based on the surface charge; positively charged SiQDs demonstrate higher adsorption compared to SiQDs with negative and neutral surface charges. The level of cytokine production in peripheral blood mononuclear cells was found to be associated with the surface charge of SiQDs prior to the binding of the CpG ODNs. Significantly higher levels of IL-6 and IFN-α induction were observed compared to neutral and negatively charged SiQDs loaded with CpG ODNs. This observation strongly supports the notion that the surface charge of SiQDs effectively regulates cytokine induction.

Size-dependent color tuning of efficiently luminescent germanium nanoparticles.

It is revealed that rigorous control of the size and surface of germanium nanoparticles allows fine color tuning of efficient fluorescence emission in the visible region. The spectral line widths of each emission were very narrow (<500 meV). Furthermore, the absolute fluorescence quantum yields of each emission were estimated to be 4-15%, which are high enough to be used as fluorescent labeling tags. In this study, a violet-light-emitting nanoparticle is demonstrated to be a new family of luminescent Ge. Such superior properties of fluorescence were observed from the fractions separated from one mother Ge nanoparticle sample by the fluorescent color using our developed combinatorial column technique. It is commonly believed that a broad spectral line width frequently observed from Ge nanoparticle appears because of an indirect band gap nature inherited even in nanostructures, but the present study argues that such a broad luminescence spectrum is expressed as an ensemble of different spectral lines and can be separated into the fractions emitting light in each wavelength region by the appropriate postsynthesis process.

Impact of coherent core/shell architecture on fast response in InP-based quantum dot photodiodes.

Solution-processed, cadmium-free quantum dot (QD) photodiodes are compatible with printable optoelectronics and are regarded as a potential candidate for wavelength-selective optical sensing. However, a slow response time resulting from low carrier mobility and a poor dissociation of charge carriers in the optically active layer has hampered the development of the QD photodiodes with nontoxic device constituents. Herein, we report the first InP-based photodiode with a multilayer device architecture, working in photovoltaic mode in photodiode circuits. The photodiode showed the fastest response speed with rising and falling times of τ r = 4 ms and τ f = 9 ms at a voltage bias of 0 V at room temperature in ambient air among the Cd-free photodiodes. The single-digit millisecond photo responses were realized by efficient transportation of the photogenerated carriers in the optically active layer resulting from coherent InP/ZnS core/shell QD structure, fast separation of electron and hole pairs at the interface between QD and Al-doped ZnO layers, and optimized conditions for uniform deposition of each thin film. The results suggested the versatility of coherent core/shell QDs as a photosensitive layer, whose structures allow various semiconductor combinations without lattice mismatch considerations, towards fast response, high on/off ratios, and spectrally tunable optical sensing.

A facile approach to preparing personalized cancer vaccines using iron-based metal organic framework.

Background: Considering the diversity of tumors, it is of great significance to develop a simple, effective, and low-cost method to prepare personalized cancer vaccines. Methods: In this study, a facile one-pot synthetic route was developed to prepare cancer vaccines using model antigen or autologous tumor antigens based on the coordination interaction between Fe3+ ions and endogenous fumarate ligands. Results: Herein, Fe-based metal organic framework can effectively encapsulate tumor antigens with high loading efficiency more than 80%, and act as both delivery system and adjuvants for tumor antigens. By adjusting the synthesis parameters, the obtained cancer vaccines are easily tailored from microscale rod-like morphology with lengths of about 0.8 µm (OVA-ML) to nanoscale morphology with sizes of about 50~80 nm (OVA-MS). When cocultured with antigen-presenting cells, nanoscale cancer vaccines more effectively enhance antigen uptake and Th1 cytokine secretion than microscale ones. Nanoscale cancer vaccines (OVA-MS, dLLC-MS) more effectively enhance lymph node targeting and cross-presentation of tumor antigens, mount antitumor immunity, and inhibit the growth of established tumor in tumor-bearing mice, compared with microscale cancer vaccines (OVA-ML, dLLC-ML) and free tumor antigens. Conclusions: Our work paves the ways for a facile, rapid, and low-cost preparation approach for personalized cancer vaccines.