Advances in rapid point-of-care virus testing.

Outbreaks of viral diseases seriously jeopardize people's health and cause huge economic losses. At the same time, virology provides a new perspective for biology, molecular biology and cancer research, and it is important to study the discovered viruses with potential applications. Therefore, the development of immediate and rapid viral detection methods for the prevention and treatment of viral diseases as well as the study of viruses has attracted extensive attention from scientists. With the continuous progress of science and technology, especially in the field of bioanalysis, a series of new detection techniques have been applied to the on-site rapid detection of viruses, which has become a powerful approach for human beings to fight against viruses. In this paper, the latest research progress of rapid point-of-care detection of viral nucleic acids, antigens and antibodies is presented. In addition, the advantages and disadvantages of these technologies are discussed from the perspective of practical application requirements. Finally, the problems and challenges faced by rapid viral detection methods and their development prospects are discussed.

Detection methods for antibiotics in wastewater: a review.

Antibiotics are widely used as fungicides because of their antibacterial and bactericidal effects. However, it is necessary to control their dosage. If the amount of antbiotics is too much, it cannot be completely metabolized and absorbed, will pollute the environment, and have a great impact on human health. Many antibiotics usually left in factory or aquaculture wastewater pollute the environment, so it is vital to detect the content of antibiotics in wastewater. This article summarizes several common methods of antibiotic detection and pretreatment steps. The detection methods of antibiotics in wastewater mainly include immunoassay, instrumental analysis method, and sensor. Studies have shown that immunoassay can detect deficient concentrations of antibiotics, but it is affected by external factors leading to errors. The detection speed of the instrumental analysis method is fast, but the repeatability is poor, the price is high, and the operation is complicated. The sensor is a method that is currently increasingly studied, including electrochemical sensors, optical sensors, biosensors, photoelectrochemical sensors, and surface plasmon resonance sensors. It has the advantages of fast detection speed, high accuracy, and strong sensitivity. However, the reproducibility and stability of the sensor are poor. At present, there is no method that can comprehensively integrate the advantages. This paper aims to review the enrichment and detection methods of antibiotics in wastewater from 2020 to the present. It also aims to provide some ideas for future research directions in this field.

[Study on the Analysis of the Proportion of Mixed Samples with Near Infrared Spectroscopy and Non-Negative Coefficients Regression].

In the process of practical production, it is important to accurately analyze the proportion of mixed samples with high speed, which plays a great role for quality control and formulation design in food and agricultural processing. Traditional solution is to build statistical model with a large number of representative samples, which is both labor-intensive and time-consuming. In this paper, the proportion of alcohol and acids mixed samples, and their dilute solution mixed samples(used carbon tetrachloride (CCl4) which has no near-infrared absorption characteristics as the solvent medium)，as well as sheet tobacco leaf mixed samples are respectively analyzed by using near infrared spectroscopy, SG smooth and non-negative coefficients regression, which verifies the feasibility of analyzing the proportion of the mixed samples. The results show that, the analytic proportion of transmission spectra of alcohol and acids according to non-negative coefficients regression is closer to actual molar proportion with result error less than 4%. The result of the dilute solution is much better with error less than 4%. The analytic proportion of diffuse reflectance spectra of sheet tobacco leaf according to non-negative coefficients regression is highly accurate with error less than 10%. In the meantime, it has a highly consistency between actual spectra and analytic spectra of mixed samples; and the result of F-test and T-test shows that there is no significant difference between them and the confidence level is 0.01. It has the reliability of analytical proportion in theory. With the spectral data of several pure samples, the proportion of mixed samples can be thus analyzed, which has a good application prospect for quality control and formulation design in food and agricultural processing.

[Quality anlysis of the before redrying raw tobacco & after redrying sheet tobacco by using online near infrared spectroscopy].

In this paper, the 7 different origin before redrying raw tobacco & after redrying sheet tobacco's online near infrared spectroscopy were collected from sorting & redrying production line specifically for "ZHONGHUA" brand. By using the projection model bulit by different origin tobacco's online spectroscopy and the method of variance and correlation analysis, we studied the uniformity and similarity quality characteristics change before and after the redrying of tobacco, which can provide support for understanding the quality of the tobacco material and cigarette product formulations. This study show that selecting about 10,000 by equally spaced sampling time from a huge number of online near infrared spectroscopy, for modeling are feasible, and representative. After manual sorting, threshing, and redrying, the uiformity of each origin tobacco near-infrared spectroscopy can be increased by 10%~35%, homogeneity of the tobacco leaf has been significantly improved. After redrying, the similar relationship embodied in the origin also have significant changes, overall it reduce significantly, that shows the quality differences embodied by origin significantly improve, which can provide greater space for formulations, it shows the need for high-quality Chinese cigarette production requires large amounts of financial and human resources to implement cured tobacco processing. The traditional means of chemical analysis, it takes a lot of time and effort, it is difficult to control the entire processing chain, Near Infrared Spectroscopy with its rapid, non-destructive advantage, not only can achieve real-time detection and quality control, but also can take full advantage of near-infrared spectroscopy information created in the production process, which is a very promising online analytical detection technology in many industries especially in the agricultural and food processing industries.

[Analysis of tobacco site features using near-infrared spectroscopy and projection model].

In this paper, total of 5170 flue-cured tobacco samples collected from 2003 to 2012 in the domestic and foreign origin by Shanghai Tobacco Group Technical Center were tested by near infrared spectroscopy, including the typical upper leaves 1394, central 2550, the lower part of 1226. Using projection model of based on principal component and Fisher criterion (PPF), follow the projected results to get no statistically significant differences at adjacent principal components, and the number of principal components as little as possible, in this paper, four main components to build projection analysis model, the model results show that: the near-infrared spectral characteristics of the upper and lower leaves have a significant difference that can be achieved almost entirely distinguished; while the middle leaves with upper and lower have a certain degree of overlap, which is consistent to the actual situation of the continuity of tobacco leaf. At the same time, Euclidean distance between the predicted sample projection values and the mean projection values of each class in the model, a description is given for the prediction samples to quantify the extent of the site features, and its first and second close categories. Using the dispersion of projected values in model and the given threshold value, prediction results can be refined into typically upper, upper to central, central to upper, typical central, central to the lower, the lower to central, typically the lower, or super-model range. The model was validated by 34 tobacco samples obtained from the re-drying process in 2012 with different origins and parts. This kind of analysis methods, not only can achieve discriminant analysis, and get richer feature attribute information, can provide guidance on the raw tobacco processing and formulations.

[Analysis of tobacco style features using near-infrared spectroscopy and projection model].

In the present paper, a total of 4,733 flue-cured tobacco samples collected from 2003 to 2012 in 17 provincial origins and 5 ecological areas were tested by near infrared spectroscopy, including the NONG(Luzhou) flavor 1,580 cartons, QING (Fen) flavor 2004 cartons and Intermediate flavor 1 149 cartons. Using projection model based on principal component and Fisher criterion (PPF), Projection analysis models of tobacco ecological regions and style characteristics were established. Reasonableness of style flavor division is illustrated by the model results of tobacco ecological areas. With the Euclidean distance between the predicted sample projection values and the mean projection values of each class in style characteristics model, a description is given for the prediction samples to quantify the extent of the style features, and their first and second close categories. Using the dispersion of projected values in model and the given threshold value, prediction results can be refined into typical NONG, NONG to Intermediate, Intermediate to NONG, typical Intermediate, Intermediate to QING, QING to Intermediate, typical QING, QING to NONG, NONG to QING, or super-model range. The model was validated by 35 tobacco samples obtained from the re-dryingprocess in 2012 with different origins and parts. This kind of analysis methods not only can achieve discriminant analysis, but also can get richer feature attribute information and provide guidance to raw tobacco processing and formulations.

An aptamerelectrochemical sensor based on functional carbon nanofibers for tetracycline determination.

Fe-Co@CNF was synthesized by electrospinning technology, and AuNPs was loaded onto Fe-Co@CNF by in-situ reduction to obtain Fe-Co@CNF@AuNPs composite material, which was used as the working electrode based on Au-S bond cooperation. The tetracycline electrochemical sensing interface Fe-Co@CNF@AuNPs@Apt was constructed by connecting mercaptoylated tetracycline (TC) aptamers on Fe-Co@CNF@AuNPs surface. The morphology and composition of Fe-Co@CNF@AuNPs composites were characterized by SEM, TEM, EDS, XRD and XPS, and the electrochemical properties of tetracycline were evaluated by CV and DPV. The results showed that the addition of Fe and Co did not destroy the structure of the original carbon nanofibers, and their synergistic effect enhanced the electrocatalytic performance, effective electrode area and electron transfer ability of carbon nanofibers. AuNPs are evenly distributed over the fibers, which effectively improves the electrical conductivity of the material. Under the optimal conditions, the theoretical detection limit of tetracycline was 0.213 nM, and the linear detection range was 5.12-10 mM, which could successfully detect tetracycline in milk.