RESUMO
Biologically produced materials are an attractive alternative to traditional materials such as metals and plastics and offer improved functionalities such as better biodegradability and biocompatibility. Polysaccharides are an example of biologically produced materials that can have a range of chemical and physical properties including high stiffness to weight ratios and thermal stability. Polysaccharides synthesized by bacteria can come with many advantages such as being non-toxic and are mechanically robust relative to proteins and lipids, which are also secreted by bacteria to generate a biofilm. Biomanufacturing offers benefits compared to traditional manufacturing including low resource investment and equipment requirements, providing an alternative to sourcing fossil fuel byproducts, and relatively low temperatures needed for production. However, many biologically produced materials require complex and lengthy purification processes before use. This paper (1) identifies the material properties of a novel polysaccharide, dubbed promonan, isolated from the extracellular polymeric substances of Sphingomonas sp. LM7; (2) demonstrates that these properties can be manipulated to suit specific applications; and (3) presents two alternative methods of processing to shorten purification time by more than 50% while maintaining comparable material properties.
Assuntos
Sphingomonas , Sphingomonas/metabolismo , Polissacarídeos/química , Polissacarídeos/metabolismo , Polissacarídeos Bacterianos/química , Materiais Biocompatíveis/química , BiofilmesRESUMO
Biomaterials such as spider silk and mussel byssi are fabricated by the dynamic manipulation of intra- and intermolecular biopolymer interactions. Organisms modulate solution parameters, such as pH and ion co-solute concentration, to effect these processes. These biofabrication schemes provide a conceptual framework to develop new dynamic and responsive abiotic soft material systems. Towards these ends, the chemical diversity of readily available ionic compounds offers a broad palette to manipulate the physicochemical properties of polyelectrolytes via ion-specific interactions. In this study, we show for the first time that the ion-specific interactions of biomimetic polyelectrolytes engenders a variety of phase separation behaviors, creating dynamic, thermal and ion responsive soft matter. that exhibits a spectrum of physical properties, spanning viscous fluids, to viscoelastic and viscoplastic solids. These ion dependent characteristics are further rendered general by the merger of lysine and phenylalanine into a single, amphiphilic vinyl monomer. The unprecedented breadth, precision, and dynamicity in the reported ion dependent phase behaviors thus introduce a broad array of opportunities for the future development of responsive soft matter, properties that are poised to drive developments in critical areas such as chemical sensing, soft robotics, and additive manufacturing.
RESUMO
Mechanochemistry can lead to the degradation of the properties of covalent macromolecules. In recent years, numerous functional materials have been developed based on block copolymers (BCPs), however, like homopolymers, their chains could undergo mechanochemical damage during processing, which could have crucial impact on their performance. To investigate the mechanochemical response of BCPs, multiple polymers comprising different ratios of butyl acrylate and methyl methacrylate were prepared with similar degree of polymerization and stressed in solution via ultrasonication. Interestingly, all BCPs, regardless of the amount of the methacrylate monomer, presented a mechanochemistry rate constant similar to that of the methacrylate homopolymer, while a random copolymer reacted like the acrylate homopolymer. Size-exclusion chromatography showed that, in addition to the typical main peak shift towards higher retention times, a different daughter fragment was produced indicating a secondary selective scission site, situated around the covalent connection between the two blocks. Molecular dynamics modeling using acrylate and methacrylate oligomers were carried out and indicated that dynamic phase separation occurs even in a good solvent. Such non-random conformations can explain the faster polymer mechanochemistry. Moreover, the dynamic model for end-to-end chain overstretching supports bond scission which is not necessarily chain-centered.
RESUMO
Dynamic bonds are a powerful approach to tailor the mechanical properties of elastomers and introduce shape-memory, self-healing, and recyclability. Among the library of dynamic crosslinks, electrostatic interactions among oppositely charged ions have been shown to enable tough and resilient elastomers and hydrogels. In this work, we investigate the mechanical properties of ionically crosslinked ethyl acrylate-based elastomers assembled from oppositely charged copolymers. Using both infrared and Raman spectroscopy, we confirm that ionic interactions are established among polymer chains. We find that the glass transition temperature of the complex is in between the two individual copolymers, while the complex demonstrates higher stiffness and more recovery, indicating that ionic bonds can strengthen and enhance recovery of these elastomers. We compare cycles to increasing strain levels at different strain rates, and hypothesize that at fast strain rates ionic bonds dynamically break and reform while entanglements do not have time to slip, and at slow strain rates ionic interactions are disrupted and these entanglements slip significantly. Further, we show that a higher ionic to neutral monomer ratio can increase the stiffness, but its effect on recovery is minimal. Finally, taking advantage of the versatility of acrylates, ethyl acrylate is replaced with the more hydrophilic 2-hydroxyethyl acrylate, and the latter is shown to exhibit better recovery and self-healing at a cost of stiffness and strength. The design principles uncovered for these easy-to-manufacture polyelectrolyte complex-inspired bulk materials can be broadly applied to tailor elastomer stiffness, strength, inelastic recovery, and self-healing for various applications.
RESUMO
Leakage and accumulation of highly stable commercial plastics has led to substantial contamination of the environment. Highly isotactic poly(propylene oxide) (iPPO) was investigated as a potential high-strength thermoplastic with greater susceptibility toward degradation under ambient conditions. Various stereoregular forms of iPPO including enantiopure, enantioenriched, racemic, and stereoblock were synthesized with a single catalyst architecture in the presence of chain transfer agents. These materials were found to possess the same approximate ultimate tensile strength (UTS) via uniaxial tensile elongation analysis (â¼75 MPa). A serrated tensile response corresponding to stress oscillations was observed in all forms of iPPO. An investigation on strain rate dependence showed that an increase in strain rate results in the decay and disappearance of the serrated response. Further evaluation of iPPO revealed its dramatic strain hardening afforded an UTS comparable to that of nylon-6,6. Exposing iPPO to UVA light (365 nm) resulted in photolytic degradation. Following 30 days of continuous exposure at 250 µW cm-2, the Mn decreased from 93 kDa to 21 kDa, while samples not exposed to UVA light remained unchanged. Through selective stabilization with antioxidant additives, we believe iPPO could be a suitable replacement for nylon-6,6 in environmentally susceptible applications.
RESUMO
Polymer networks cross-linked by reversible metal-ligand interactions possess versatile mechanical properties achieved simply by varying the metal species and quantity. Although prior experiments have revealed the dependence of the network's viscoelastic behavior on the dynamics of metal-ligand interaction, a theoretical framework with quantitative relations that would enable efficient material design, is still lacking. One major challenge is isolating the effect of metal-ligand interaction from other factors in the polymer matrix. To address this challenge, we designed a linear precursor free from solvents, chain entanglements and polymer-metal phase separation to ensure that relaxation of the network is mainly governed by the dissociation and association of the metal-ligand cross-links. The rheological behavior of the networks was thoroughly characterized regarding the changes in cross-link density, binding stoichiometry and coordination stability, allowing quantitative comparison between experimental results and the sticky Rouse model. Through this process, we noticed that the presence of reversible cross-links increases the network modulus at high frequency compared to the linear polymer, and that the effective metal-ligand dissociation time increases dramatically with increasing the cross-link density. Informed by these findings, we modified the expression of the sticky Rouse model. For the polymer in which the metal center and ligands bond in a paired association, the relaxation follows our enhanced sticky Rouse model. For the polymer in which each reversible cross-link consists of multiple metal centers and ligands, the relaxation timescale is significantly extended due to greater restriction on the polymer chains. This systematic study bridges experiments and theory, providing deeper understanding of the mechanical properties of metallopolymers and facilitating material design.
RESUMO
Mechanochromic functionality realized through force-responsive molecules (i.e., mechanophores) has great potential for spatially localized damage warning in polymers. However, in structural plastics, for which damage warning is most critical, this approach has had minimal success because brittle failure typically precedes detectable color change. Herein, we report on the room-temperature mechanochromic activation of spiropyran in high Tg bisphenol A polycarbonate. The mechanochromic functionality was introduced by polymerization of dihydroxyspiropyran as a comonomer while retaining the excellent thermomechanical properties of the polycarbonate. The mechanochromic behavior is thoroughly evaluated in response to changes in stress, deformation, and time, providing new insights regarding how loading history controls stress accumulation in polymer chains. In addition, a new method to incorporate mechanochromic functionality in structures without dispersing costly mechanophores in the bulk is demonstrated by using a mechanochromic laminate. The room-temperature mechanochromic activation in a structural polymer combined with the new and efficient preparation and processing methods bring us closer to the application of mechanochromic smart materials.
RESUMO
Single chain polymer nanoparticles (SCPNs) are formed from intrachain cross-linking of a single polymer chain, making SCPN distinct from other polymer nanoparticles for which the shape is predefined before polymerization. The degree of cross-linking in large part determines the internal architecture of the SCPNs and therefore their mechanical and thermomechanical properties. Here, we use molecular dynamics (MD) simulations to study thermomechanical behavior of individual SCPNs with different underlying structures by varying the ratio of cross-linking and the degree of polymerization. We characterize the particles in terms of shape, structure, glass transition temperature, mobility, and stress response to compressive loading. The results indicate that the constituent monomers of SCPNs become less mobile as the degree of cross-linking is increased corresponding to lower diffusivity and higher stress at a given temperature.
RESUMO
Biologically produced materials are an attractive alternative to traditional materials such as metals and plastics and offer improved functionalities such as better biodegradability and biocompatibility. Polysaccharides are an example of a biologically produced materials that can have a range of chemical and physical properties including high stiffness to weight ratios and thermal stability. Biomanufactured bacterial polysaccharides can come with many advantages such as being non-toxic and are mechanically robust relative to proteins and lipids, which are also secreted by bacteria to generate a biofilm. One major goal in biomanufacturing is to produce quality material quickly and cost-effectively. Biomanufacturing offers additional benefits compared to traditional manufacturing including low resource investment and equipment requirements, providing an alternative to sourcing fossil fuel byproducts, and relatively low temperatures needed for production. However, many biologically produced materials require complex and lengthy purification processes before use. This paper 1) identifies the material properties of a novel polysaccharide, dubbed promonan, isolated from the extracellular polymeric substances of Sphingomonas sp. LM7; 2) demonstrates that these properties can be manipulated to suit specific applications; and 3) presents two alternative methods of processing to shorten purification time by more than 50% while maintaining comparable material.
RESUMO
A novel mechanophore with acid-releasing capability is designed to produce a simple catalyst for chemical change in materials under mechanical stress. The mechanophore, based on a gem-dichlorocyclopropanated indene, is synthesized and used as a cross-linker in poly(methyl acrylate). Force-dependent rearrangement is demonstrated for cross-linked mechanophore samples loaded in compression, while the control shows no significant response. The availability of the released acid is confirmed by exposing a piece of insoluble compressed polymer to a pH indicator solution. The development of this new mechanophore is the first step toward force-induced remodeling of stressed polymeric materials utilizing acid-catalyzed cross-linking reactions.
RESUMO
Analytical relations for the mechanical response of single polymer chains are valuable for modeling purposes, on both the molecular and the continuum scale. These relations can be obtained using statistical thermodynamics and an idealized single-chain model, such as the freely jointed chain model. To include bond stretching, the rigid links in the freely jointed chain model can be made extensible, but this almost always renders the model analytically intractable. Here, an asymptotically correct statistical thermodynamic theory is used to develop analytic approximations for the single-chain mechanical response of this model. The accuracy of these approximations is demonstrated using several link potential energy functions. This approach can be applied to other single-chain models, and to molecular stretching in general.
RESUMO
Anticipating an increasing demand for hybrid double network (DN) hydrogels in biomedicine and biotechnology, this study evaluated the effects of each network on the mechanical and biological properties. Polyethylene glycol (PEG) (meth)acrylate hydrogels with varied monomer molecular weights and architectures (linear vs. 4-arm) were produced with and without an added ionically bonded alginate network and their mechanical properties were characterized using compression testing. The results showed that while some mechanical properties of PEG single network (SN) hydrogels decreased or changed negligibly with increasing molecular weight, the compressive modulus, strength, strain to failure, and toughness of DN hydrogels all significantly increased with increased PEG monomer molecular weight. At a fixed molecular weight (10 kDa), 4-arm PEG SN hydrogels exhibited better overall mechanical performance; however, this benefit was diminished for the corresponding DN hydrogels with comparable strength and toughness and lower strain to failure for the 4-arm case. Regardless of the PEG monomer structure, the alginate network made a relatively larger contribution to the overall DN mechanical properties when the covalent PEG network was looser with a larger mesh size (e.g., for larger monomer molecular weight and/or linear architecture) which presumably enabled more ionic crosslinking. Considering the biological performance, adipose derived stem cell cultures demonstrated monotonically increasing cell area and Yes-associated protein related mechanosensing with increasing amounts of alginate from 0 to 2 wt.%, demonstrating the possibility for using DN hydrogels in guiding musculoskeletal differentiation. These findings will be useful to design suitable hydrogels with controllable mechanical and biological properties for mechanically demanding applications. STATEMENT OF SIGNIFICANCE: Hydrogels are widely used in commercial applications, and recently developed hybrid double network hydrogels have enhanced strength and toughness that will enable further expansion into more mechanically demanding applications (e.g., medical implants, etc.). The significance of this work is that it uncovers some key principles regarding monomer molecular weight, architecture, and concentration for developing strong and tough hybrid double network hydrogels that would not be predicted from their single network counterparts or a linear combination of the two networks. Additionally, novel insight is given into the biological performance of hybrid double network hydrogels in the presence of adipose derived stem cell cultures which suggests new scope for using double network hydrogels in guiding musculoskeletal differentiation.
Assuntos
Materiais Biocompatíveis , Hidrogéis , Alginatos , Polietilenoglicóis , Próteses e ImplantesRESUMO
Chemical and physical strategies allow polymer chains in hydrogels to extend or slip.
RESUMO
A fundamental theory is presented for the mechanical response of polymer networks undergoing large deformation which seamlessly integrates statistical mechanical principles with macroscopic thermodynamic constitutive theory. Our formulation permits the consideration of arbitrary polymer chain behaviors when interactions among chains may be neglected. This careful treatment highlights the naturally occurring correspondence between single-chain mechanical behavior and the equilibrium distribution of chains in the network, as well as the correspondences between different single-chain thermodynamic ensembles. We demonstrate these important distinctions with the extensible freely jointed chain model. This statistical mechanical theory is then extended to the continuum scale, where we utilize traditional macroscopic constitutive theory to ultimately retrieve the Cauchy stress in terms of the deformation and polymer network statistics. Once again using the extensible freely jointed chain model, we illustrate the importance of the naturally occurring statistical correspondences through their effects on the stress-stretch response of the network. We additionally show that these differences vanish when the number of links in the chain becomes sufficiently large enough, and discuss why certain methods perform better than others before this limit is reached.
RESUMO
The ability to change polymer properties has in the past largely been a factor of modulating the molecular weight, molecular weight distribution breadth, crosslinking, or branching. The use of controlled MWD shape has recently emerged as a promising avenue towards modifying polymer properties. Taking advantage of molecular weight distribution shape, we report a simple and efficient approach for tuning material properties in polystyrene-block-polyisoprene-block-polystyrene (SIS) thermoplastic elastomers (TPEs). We find that the skew of the MWD function governs tensile properties and can be used as a handle to predictably vary polymer toughness while reducing energy dissipation.
RESUMO
Minicollagens from cnidarian nematocysts are attractive potential building blocks for the creation of strong, lightweight and tough polymeric materials with the potential for dynamic and reconfigurable crosslinking to modulate functionality. In this study, the Hydra magnipapillata minicollagen-1 isoform was recombinantly expressed in bacteria, and a high throughput purification protocol was developed to generate milligram levels of pure protein without column chromatography. The resulting minicollagen-1 preparation demonstrated spectral properties similar to those observed with collagen and polyproline sequences as well as the ability to self-assemble into oriented fibers and bundles. Photo-crosslinking with Ru(II) ( bpy ) 3 2 + was used to create robust hydrogels that were analyzed by mechanical testing. Interestingly, the minicollagen-1 hydrogels could be dissolved with reducing agents, indicating that ruthenium-mediated photo-crosslinking was able to induce disulfide metathesis to create the hydrogels. Together, this work is an important first step in creating minicollagen-based materials whose properties can be manipulated through static and reconfigurable post-translational modifications.
RESUMO
We introduce the use of buckled foam for soft pneumatic actuators. A moderate amount of residual compressive strain within elastomer foam increases the applied force â¼1.4 × or stroke â¼2 × compared with actuators without residual strain. The origin of these improved characteristics is explained analytically. These actuators are applied in a direct cardiac compression (DCC) device design, a type of implanted mechanical circulatory support that avoids direct blood contact, mitigating risks of clot formation and stroke. This article describes a first step toward a pneumatically powered, patient-specific DCC design by employing elastomer foam as the mechanism for cardiac compression. To form the device, a mold of a patient's heart was obtained by 3D printing a digitized X-ray computed tomography or magnetic resonance imaging scan into a solid model. From this model, a soft, robotic foam DCC device was molded. The DCC device is compliant and uses compressed air to inflate foam chambers that in turn apply compression to the exterior of a heart. The device is demonstrated on a porcine heart and is capable of assisting heart pumping at physiologically relevant durations (â¼200 ms for systole and â¼400 ms for diastole) and stroke volumes (â¼70 mL). Although further development is necessary to produce a fully implantable device, the material and processing insights presented here are essential to the implementation of a foam-based, patient-specific DCC design.
Assuntos
Coração Auxiliar , Robótica , Desenho de Equipamento , Humanos , Volume SistólicoRESUMO
Poly(ethylene glycol) hydrogels with disulfide linkages are functionalized through applied force. Compression or tension induces bond rupture at the relatively weak disulfide linkages, which will subsequently react through Michael-type addition with an acceptor molecule within the gel. We demonstrate the utility of this approach by patterning cell adhesion proteins through compression of a lithographically structured stamp, where cells predominately adhere to the compressed regions.
RESUMO
A metal-elastomer-foam composite that varies in stiffness, that can change shape and store shape memory, that self-heals, and that welds into monolithic structures from smaller components is presented.