RESUMO
Ageing is characterised by a progressive increase in systemic inflammation and especially neuroinflammation. Neuroinflammation is associated with altered brain states that affect behaviour, such as an increased level of anxiety with a concomitant decline in cognitive abilities. Although multiple factors play a role in the development of neuroinflammation, microglia have emerged as a crucial target. Microglia are the only macrophage population in the CNS parenchyma that plays a crucial role in maintaining homeostasis and in the immune response, which depends on the activation and subsequent deactivation of microglia. Therefore, microglial dysfunction has a major impact on neuroinflammation. The gut microbiota has been shown to significantly influence microglia from birth to adulthood in terms of development, proliferation, and function. Diet is a key modulating factor that influences the composition of the gut microbiota, along with prebiotics that support the growth of beneficial gut bacteria. Although the role of diet in neuroinflammation and behaviour has been well established, its relationship with microglia functionality is less explored. This article establishes a link between diet, animal behaviour and the functionality of microglia. The results of this research stem from experiments on mouse behaviour, i.e., memory, anxiety, and studies on microglia functionality, i.e., cytochemistry (phagocytosis, cellular senescence, and ROS assays), gene expression and protein quantification. In addition, shotgun sequencing was performed to identify specific bacterial families that may play a crucial role in the brain function. The results showed negative effects of long-term consumption of a high fat diet on ageing mice, epitomised by increased body weight, glucose intolerance, anxiety, cognitive impairment and microglia dysfunction compared to ageing mice on a control diet. These effects were a consequence of the changes in gut microbiota modulated by the diet. However, by adding the prebiotics fructo- and galacto-oligosaccharides, we were able to mitigate the deleterious effects of a long-term high-fat diet.
RESUMO
Resistance to the chemotherapeutic agents in the clinical management of cancer remains a significant challenge, and the mechanical environment of cancer cells is one of the major determinants of this. Stiffening of the environment is usually associated with increased chemoresistance of cancer cells, although this process depends on the type of cancer. Breast cancer is the most frequently diagnosed cancer, and more than half a million people die from it each year worldwide. In this study, we used the most frequent (70% of diagnosed cases) breast cancer phenotype, representing the MCF-7 cell line, to investigate the influence of surface stiffness on its sensitivity to one of the most commonly used anticancer drugs-doxorubicin. We showed that the mechanical environment affected MCF-7 proliferation, adhesion, and the expression and activation of mitogen-activated protein kinases (MAPKs). Furthermore, the role of MAPKs in response to doxorubicin was dependent on surface stiffness; nevertheless, surface stiffness did not affect MCF-7 resistance to doxorubicin.
Assuntos
Antineoplásicos , Neoplasias da Mama , Humanos , Feminino , Células MCF-7 , Resistencia a Medicamentos Antineoplásicos , Doxorrubicina/farmacologia , Doxorrubicina/uso terapêutico , Antineoplásicos/farmacologia , Neoplasias da Mama/metabolismo , Linhagem Celular Tumoral , Regulação Neoplásica da Expressão GênicaRESUMO
BACKGROUND AIMS: To facilitate artificial bone construct integration into a patient's body, scaffolds are enriched with different biologically active molecules. Among various scaffold decoration techniques, coating surfaces with cell-derived extracellular matrix (ECM) is a rapidly growing field of research. In this study, for the first time, this technology was applied using primary dental pulp stem cells (DPSCs) and tested for use in artificial bone tissue construction. METHODS: Rat DPSCs were grown on three-dimensional-printed porous polylactic acid scaffolds for 7 days. After the predetermined time, samples were decellularized, and the remaining ECM detailed proteomic analysis was performed. Further, DPSC-secreated ECM impact to mesenchymal stromal cells (MSC) behaviour as well as its role in osteoregeneration induction were analysed. RESULTS: It was identified that DPSC-specific ECM protein network ornamenting surface-enhanced MSC attachment, migration and proliferation and even promoted spontaneous stem cell osteogenesis. This protein network also demonstrated angiogenic properties and did not stimulate MSCs to secrete molecules associated with scaffold rejection. With regard to bone defects, DPSC-derived ECM recruited endogenous stem cells, initiating the bone self-healing process. Thus, the DPSC-secreted ECM network was able to significantly enhance artificial bone construct integration and induce successful tissue regeneration. CONCLUSIONS: DPSC-derived ECM can be a perfect tool for decoration of various biomaterials in the context of bone tissue engineering.
Assuntos
Proteômica , Alicerces Teciduais , Animais , Regeneração Óssea , Diferenciação Celular , Polpa Dentária , Matriz Extracelular/metabolismo , Osteogênese , Ratos , Células-Tronco/metabolismoRESUMO
Effective cell number monitoring throughout the three-dimensional (3D) scaffold is a key factor in tissue engineering. There are many methods developed to evaluate cell number in 2D environments; however, they often encounter limitations in 3D. Therefore, there is a demand for reliable methods to measure cell proliferation in 3D surroundings. Here, we report a novel technique for the DNA content-based evaluation of cell proliferation using DNA-binding dye DAPI. We demonstrated the method's compatibility with four different cell cultures: cancer lines MCF-7 and MH-22a, embryonic fibroblast cell line Swiss 3T3, and primary mesenchymal stem cell culture isolated from rat's incisors. The DAPI based method was able to successfully evaluate cell proliferation in 2D, 2.5D, and 3D environments. Even though the proposed method does not discriminate between viable and dead cells, it might give a convenient snapshot of the cell number at a given time point. This should help to more reliably evaluate various processes proceeding in 2.5D and 3D cultures.
Assuntos
DNA/metabolismo , Indóis/metabolismo , Impressão Tridimensional , Alicerces Teciduais/química , Animais , Diferenciação Celular , Linhagem Celular , Proliferação de Células , Células Cultivadas , Corantes Fluorescentes/metabolismo , Humanos , Camundongos , Propriedades de SuperfícieRESUMO
Background and objectives: T-cadherin (T-cad) is one of the adiponectin receptors abundantly expressed in the heart and blood vessels. Experimental studies show that T-cad sequesters adiponectin in cardiovascular tissues and is critical for adiponectin-mediated cardio-protection. However, there are no data connecting cardiac T-cad levels with human chronic heart failure (HF). The aim of this study was to assess whether myocardial T-cad concentration is associated with chronic HF severity and whether the T-cad levels in human heart tissue might predict outcomes in patients with non-ischemic dilated cardiomyopathy (NI-DCM). Materials and Methods: 29 patients with chronic NI-DCM and advanced HF were enrolled. Patients underwent regular laboratory investigations, echocardiography, coronary angiography, and right heart catheterization. TNF-α and IL6 in serum were detected by enzyme-linked immunosorbent assay (ELISA). Additionally, endomyocardial biopsies were obtained, and the levels of T-cad were assessed by ELISA and CD3, CD45Ro, CD68, and CD4- immunohistochemically. Mean pulmonary capillary wedge pressure (PCWP) was used as a marker of HF severity, subdividing patients into two groups: mean PCWP > 19 mmHg vs. mean PCWP < 19 mmHg. Patients were followed-up for 5 years. The study outcome was composite: left ventricular assist device implantation, heart transplantation, or death from cardiovascular causes. Results: T-cad shows an inverse correlation with the mean PCWP (rho = -0.397, p = 0.037). There is a tendency towards a lower T-cad concentration in patients with more severe HF, as indicated by the mean PCWP > 19 mmHg compared to those with mean PCWP ≤ 19 mmHg (p = 0.058). Cardiac T-cad levels correlate negatively with myocardial CD3 cell count (rho = -0.423, p = 0.028). Conclusions: Univariate Cox regression analysis did not prove T-cad to be an outcome predictor (HR = 1, p = 0.349). However, decreased T-cad levels in human myocardium can be an additional indicator of HF severity. T-cad in human myocardium has an anti-inflammatory role. More studies are needed to extend the role of T-cad in the outcome prediction of patients with NI-DCM.
Assuntos
Caderinas/análise , Insuficiência Cardíaca/sangue , Adulto , Biomarcadores/análise , Biomarcadores/sangue , Caderinas/sangue , Cardiomiopatia Dilatada/sangue , Cardiomiopatia Dilatada/fisiopatologia , Angiografia Coronária/métodos , Ecocardiografia/métodos , Feminino , Insuficiência Cardíaca/fisiopatologia , Humanos , Estimativa de Kaplan-Meier , Lituânia , Masculino , Pessoa de Meia-Idade , Índice de Gravidade de Doença , Fator de Necrose Tumoral alfa/análise , Fator de Necrose Tumoral alfa/sangueRESUMO
Background and Objectives: The major cause of vitamin D deficiency is inadequate exposure to sunlight. It is difficult to supplement it with food because sufficient concentrations of vitamin D naturally occur only in a handful of food products. Thereby, deficiency of this vitamin is commonly corrected with oral supplements. Different supplement delivery systems for improved vitamin D stability and bioavailability are proposed. In this study, we compared efficiency of three vitamin D delivery systems: microencapsulated, micellized, and oil-based. Materials and Methods: As a model in this medical testing, laboratory rats were used for the evaluation of bioavailability of different vitamin D vehicles. Animals were divided into three groups: the first one was given microencapsulated vitamin D3, the second-oil-based vitamin D3, and the third-micellized vitamin D3. Test substances were given per os to each animal for 7 days, and vitamin D concentration in a form of 25-hydroxyvitamin D (25(OH)D) in the blood was checked both during the vitamin delivery period and later, up to the 24th day. Results: Comparison of all three tested products showed that the microencapsulated and oil-based vitamin D3 vehicles were the most bioavailable in comparison to micellized vitamin D3. Even more, the effect of the microencapsulated form of vitamin D3 remained constant for the longest period (up to 14 days). Conclusions: The results of this study suggest that the oral vitamin D supplement vehicle has an impact on its bioavailability, thus it is important to take into account how much of the suppled vitamin D will be absorbed. To maximize the full exploit of supplement, the best delivery strategy should be employed. In our study, the microencapsulated form of vitamin D was the most bioavailable.
Assuntos
Disponibilidade Biológica , Deficiência de Vitamina D/tratamento farmacológico , Vitamina D/uso terapêutico , Animais , Suplementos Nutricionais/normas , Modelos Animais de Doenças , Ratos , Ratos Wistar/sangue , Vitamina D/análise , Vitamina D/sangue , Deficiência de Vitamina D/sangueRESUMO
Effective root canal disinfection and the subsequent release of natural growth factors from dentin are crucial to the success of regenerative endodontic procedures. This study evaluated the effect of newly introduced calcium silicate-based temporary intracanal medicament Bio-C Temp and calcium hydroxide-based material UltraCal XS on the release of transforming growth factor ß1 (TGF-ß1) from root canal dentin. Twenty-two intact and fully developed human premolars from patients aged 15-18 were shaped and irrigated according to the current clinical recommendations. The teeth were then gently split in half, and the root canal dentin of paired samples was covered with Bio-C Temp or UltraCal XS. After 3 weeks of incubation, the specimens were conditioned with 17% EDTA and the collected solution was subjected to the quantification of the released TGF-ß1 by performing an ELISA. One-way analysis of variance (ANOVA), followed by Tukey's test, was selected to determine the statistically significant differences between the groups at the 0.95 confidence level. The highest mean value of released TGF-ß1 (1993.1 pg/mL) was detected in the control group, where the root canal dentin was conditioned with 17% EDTA alone. Regarding the experimental groups, Bio-C Temp released a statistically significantly higher amount of TGF-ß1 (282.14 pg/mL) compared to UltraCal XS (114.28 pg/mL; p = 0.0158). Bio-C Temp affected the release of growth factors from root canal dentin less than UltraCal XS and may therefore serve as an intracanal medicament for regenerative endodontic procedures.
RESUMO
Pathophysiologic inflammation, e.g., from HSV-1 viral infection, can cause tissue destruction resulting in ulceration, perforation, and ultimately blindness. We developed an injectable Cornea-in-a-Syringe (CIS) sealant-filler to treat damaged corneas. CIS comprises linear carboxylated polymers of inflammation-suppressing 2-methacryloyloxyethyl phosphorylcholine, regeneration-promoting collagen-like peptide, and adhesive collagen-citrate glue. We also incorporated GF19, a modified anti-viral host defense peptide that blocked HSV-1 activity in vitro when released from silica nanoparticles (SiNP-GF19). CIS alone suppressed inflammation when tested in a surgically perforated and HSV-1-infected rabbit corneal model, allowing tissue and nerve regeneration. However, at six months post-operation, only regenerated neocorneas previously treated with CIS with SiNP-GF19 had structural and functional features approaching those of normal healthy corneas and were HSV-1 virus-free. We showed that composite injectable biomaterials can be designed to allow regeneration by modulating inflammation and blocking viral activity in an infected tissue. Future iterations could be optimized for clinical application.
RESUMO
Severe HSV-1 infection can cause blindness due to tissue damage from severe inflammation. Due to the high risk of graft failure in HSV-1-infected individuals, cornea transplantation to restore vision is often contraindicated. We tested the capacity for cell-free biosynthetic implants made from recombinant human collagen type III and 2-methacryloyloxyethyl phosphorylcholine (RHCIII-MPC) to suppress inflammation and promote tissue regeneration in the damaged corneas. To block viral reactivation, we incorporated silica dioxide nanoparticles releasing KR12, the small bioactive core fragment of LL37, an innate cationic host defense peptide produced by corneal cells. KR12 is more reactive and smaller than LL37, so more KR12 molecules can be incorporated into nanoparticles for delivery. Unlike LL37, which was cytotoxic, KR12 was cell-friendly and showed little cytotoxicity at doses that blocked HSV-1 activity in vitro, instead enabling rapid wound closure in cultures of human epithelial cells. Composite implants released KR12 for up to 3 weeks in vitro. The implant was also tested in vivo on HSV-1-infected rabbit corneas where it was grafted by anterior lamellar keratoplasty. Adding KR12 to RHCIII-MPC did not reduce HSV-1 viral loads or the inflammation resulting in neovascularization. Nevertheless, the composite implants reduced viral spread sufficiently to allow stable corneal epithelium, stroma, and nerve regeneration over a 6-month observation period.
RESUMO
Myocarditis (MC) is an inflammatory disease of the myocardium that can cause sudden death in the acute phase, and dilated cardiomyopathy (DCM) with chronic heart failure as its major long-term outcome. However, the molecular mechanisms beyond the acute MC phase remain poorly understood. The ankyrin repeat domain 1 (ANKRD1) is a functionally pleiotropic stress/stretch-inducible protein, which can modulate cardiac stress response during various forms of pathological stimuli; however, its involvement in post-MC cardiac remodeling leading to DCM is not known. To address this, we induced experimental autoimmune myocarditis (EAM) in ANKRD1-deficient mice, and evaluated post-MC consequences at the DCM stage mice hearts. We demonstrated that ANKRD1 does not significantly modulate heart failure; nevertheless, the genetic ablation of Ankrd1 blunted the cardiac damage/remodeling and preserved heart function during post-MC DCM.
Assuntos
Doenças Autoimunes , Cardiomiopatia Dilatada , Insuficiência Cardíaca , Miocardite , Camundongos , Animais , Miocardite/genética , Coração , Miocárdio/metabolismo , Cardiomiopatia Dilatada/genética , Insuficiência Cardíaca/patologiaRESUMO
UV photofunctionalization of Zirconia-based materials for abutment fabrication is a promising approach that might influence the formation of a sound peri-implant seal, thus promoting long-term soft and hard tissue implant integration. This study aimed to evaluate the effect of UV treatment of test specimens made by two different ZnO2-based ceramic materials on the hydrophilicity, cell cytotoxicity, and proliferation of human gingival fibroblasts (HGFs). Two Zirconia-based materials, high-translucent and ultra-translucent multi-layered Zirconia (Katana, Kuraray Noritake, Japan), were used to prepare a total of 40 specimens distributed in two equally sized groups based on the material (n = 20). The same surface finishing protocol was applied for all specimens, as suggested by the manufacturer. Half the specimens from each group were treated with UV-C light for 48 h. Water contact angle (WCA), fibroblast cytotoxicity, and proliferation were investigated. The WCA values for the high-translucent Zirconia ranged from 69.9° ± 6.4° to 73.7° ± 13.9° for the treated/non-treated specimens and from 79.5° ± 12.8° to 83.4° ± 11.4° for the ultra-translucent multi-layered Zirconia, respectively. However, the difference was insignificant (F(16) = 3.50, p = 0.292). No significant difference was observed for the fibroblast cytotoxicity test. The results for proliferation revealed a significant difference, which was material-dependent (F(8) = 9.58, p = 0.005). We found that UV surface photofunctionalization of ZrO2-based materials alters the human gingival fibroblast cell viability, which might produce favourable results for cell proliferation.
Assuntos
Cerâmica , Fibroblastos , Proliferação de Células , Cerâmica/toxicidade , Fibroblastos/metabolismo , Humanos , Teste de Materiais , Propriedades de Superfície , ZircônioRESUMO
OBJECTIVES: Millions of people worldwide are affected by diseases or injuries which lead to bone/tooth loss and defects. While such clinical situations are daily practice in most of the hospitals, the widely used treatment methods still have disadvantages. Therefore, this field of medicine is actively searching new tissue regeneration techniques, one of which could be stem cell secretome. Thus, the purpose of this research study was to perform the detail proteomic analysis of periosteum-derived mesenchymal stem cells secretome in order to evaluate if it is capable to induce osteo-regenerative process. MATERIAL AND METHODS: Periosteum-derived mesenchymal stem cells (PMSCs) were extracted from adult male New Zealand White rabbits. Cells were characterised by evaluating their differentiation potential. After characterisation PMSCs secretomes were collected and their proteomic analysis was performed. RESULTS: PMSCs were extracted from adult male New Zealand White rabbits. In order to characterise the extracted PMSCs, they were differentiated in the directions which mainly describes MSC multipotency - osteogenic, myogenic and adipogenic. A total of 146 proteins were detected. After characterisation PMSCs secretomes were collected and their proteomic analysis was performed. The resulting protein composition indicates the ability to promote bone regeneration to fully mature bone. CONCLUSIONS: Bioactive molecules detected in periosteum-derived mesenchymal stem cells secretome initiates the processes required for the formation of a fully functional bone.
RESUMO
BACKGROUND: Curcumin, a natural polyphenolic substance, has been known for more than two millennia as having strong anti-inflammatory activity towards multiple ailments, including arthritis. The main drawback of curcumin is its poor solubility in water, which leads to low intestinal absorption and minimal bioavailability. In this study, we aimed to compare the anti-arthritic in vivo effect of different curcumin preparations - basic curcumin extract, micellar curcumin, curcumin mixture with piperine, and microencapsulated curcumin. METHODS: Arthritis was induced in Wistar rats by complete Freund's adjuvant, and the severity of arthritis was evaluated daily using the arthritis score system. Curcumin preparations were given to animals per os daily for 20 consecutive days, starting at 6th day after arthritis induction. To determine the inflammatory background, pro-inflammatory cytokines were determined using the ELISA test. In addition, hematologic test, weight change, and limb swelling were tracked. RESULTS: Our results indicate that curcumin had a rather weak effect on arthritis progression in the Wistar rat model, microencapsulated curcumin effectively prevented the progression of arthritis - the disease stabilized after 10 days of supplementation. It also reduced the levels of immune cells (neutrophils and leukocytes), as well as pro-inflammatory cytokines - TNFα, IL-1, and IL-6, which levels were close to arthritis-free control. Other formulations of curcumin had lower or no effect on arthritis progression. CONCLUSION: Our study shows that the same concentrations of curcumin had a distinctly expressed positive anti-inflammatory effect depending on the form of its delivery. Specifically, we found that microencapsulated curcumin had the most promising effect for treatment.
Assuntos
Anti-Inflamatórios/administração & dosagem , Anti-Inflamatórios/química , Artrite Experimental/tratamento farmacológico , Curcumina/administração & dosagem , Curcumina/química , Composição de Medicamentos/métodos , Animais , Artrite Experimental/induzido quimicamente , Artrite Experimental/genética , Artrite Experimental/imunologia , Citocinas/imunologia , Feminino , Adjuvante de Freund/efeitos adversos , Humanos , Interleucina-1beta/genética , Interleucina-1beta/imunologia , Interleucina-6/genética , Interleucina-6/imunologia , Masculino , Ratos , Ratos WistarRESUMO
Parvovirus B19 (B19V) is a widespread human pathogen possessing a high tropism for erythroid precursor cells. However, the persistence or active replication of B19V in endothelial cells (EC) has been detected in diverse human pathologies. The VP1 unique region (VP1u) of the viral capsid has been reported to act as a major determinant of viral tropism for erythroid precursor cells. Nevertheless, the interaction of VP1u with EC has not been studied. We demonstrate that recombinant VP1u is efficiently internalized by rats' pulmonary trunk blood vessel-derived EC in vitro compared to the human umbilical vein EC line. The exposure to VP1u was not acutely cytotoxic to either human- or rat-derived ECs, but led to the upregulation of cellular stress signaling-related pathways. Our data suggest that high levels of circulating B19V during acute infection can cause endothelial damage, even without active replication or direct internalization into the cells.
Assuntos
Células Endoteliais da Veia Umbilical Humana/efeitos dos fármacos , Parvovirus B19 Humano/química , Proteínas Virais de Fusão/farmacologia , Animais , Sobrevivência Celular , Células Cultivadas , Células Endoteliais da Veia Umbilical Humana/metabolismo , Humanos , Sistema de Sinalização das MAP Quinases , Artéria Pulmonar/citologia , Ratos , Ratos Wistar , Proteínas Recombinantes/química , Proteínas Recombinantes/farmacologia , Proteínas Virais de Fusão/químicaRESUMO
Mesenchymal stem cells (MSCs) are widely used in the fields of cell therapy and tissue engineering, due to their wide spectrum of differentiation potential, immunomodulation function and ongoing oxidative stress (OS) reduction. Nevertheless, OS impact is often overlooked in these research fields. It is not only responsible for the induction and development of many ailments, e.g., diabetes, lung fibrosis, and cancer, moreover, OS causes stem cell death and senescence during cell therapy and tissue engineering practices. As MSCs are used to treat various tissues, they interact with different tissue-specific mechanical environments, thus it is important to understand how the mechanical environment impacts MSC sensitivity to OS. In this work, for the first time, as known to the authors, it was shown that gingival MSCs (GMSCs) sensitivity to OS depends on the stiffness of the surface, on which the cells are grown. Furthermore, the activity and expression of mitogen activated protein kinases ERK, JNK, and p38 were surface stiffness dependent. GMSCs isolated from intermediate/stiff gingiva tissue (~20 kPa) have shown the best proliferative and survival properties, then grown on the stiffest tissues mimicking polyacrylamide hydrogels (40 kPa). Therefore, MSC source might determine their sensitivity to OS in different stiffness environments and should be accounted when developing a treatment strategy.
Assuntos
Células-Tronco Mesenquimais , Diferenciação Celular , Células Cultivadas , Gengiva , Estresse OxidativoRESUMO
The mesenchymal stem cell (MSC) secretome has been considered an innovative therapeutic biological approach, able to modulate cellular crosstalk and functionality for enhanced tissue repair and regeneration. This study aims to evaluate the functionality of the secretome isolated from periosteum-derived MSCs, from either basal or osteogenic-induced conditions, in the healing of a critical size calvarial bone defect in the rabbit model. A bioceramic xenograft was used as the vehicle for secretome delivery, and the biological response to the established biocomposite system was assessed by clinical, histological, histomorphometric, and microtomographic analysis. A comparative analysis revealed that the osteogenic-induced secretome presented an increased diversity of proteins, with emphasis on those related to osteogenesis. Microtomographic and histological morphometric analysis revealed that bioceramic xenografts implanted with secretomes enhanced the new bone formation process, with the osteogenic-induced secretome inducing the highest bone tissue formation. The application of the MSC secretome, particularly from osteogenic-induced populations, may be regarded as an effective therapeutic approach to enhance bone tissue healing and regeneration.
RESUMO
3D printing of polylactic acid (PLA) and hydroxyapatite (HA) or bioglass (BG) bioceramics composites is the most promising technique for artificial bone construction. However, HA and BG have different chemical composition as well as different bone regeneration inducing mechanisms. Thus, it is important to compare differentiation processes induced by 3D printed PLA + HA and PLA + BG scaffolds in order to evaluate the strongest osteoconductive and osteoinductive properties possessing bioceramics. In this study, we analysed porous PLA + HA (10%) and PLA + BG (10%) composites' effect on rat's dental pulp stem cells fate in vitro. Obtained results indicated, that PLA + BG scaffolds lead to weaker cell adhesion and proliferation than PLA + HA. Nevertheless, osteoinductive and other biofriendly properties were more pronounced by PLA + BG composites. Overall, the results showed a strong advantage of bioceramic BG against HA, thus, 3D printed PLA + BG composite scaffolds could be a perspective component for patient-specific, cheaper and faster artificial bone tissue production.
Assuntos
Durapatita , Alicerces Teciduais , Animais , Regeneração Óssea , Proliferação de Células , Cerâmica , Humanos , Poliésteres , Impressão Tridimensional , RatosRESUMO
INTRODUCTION: In complex clinical conditions when physiological bone regeneration is insufficient, there is a need to develop synthetic material-based scaffolds. The morphologic properties of porous scaffolds are of crucial importance. The dimensional accuracy of 3D printed scaffolds can be affected by a variety of factors. MATERIALS AND METHODS: Three groups of 3D printed scaffolds were investigated: PLA1 (pure polylactic acid) printed with an FDM Ultimaker Original printer, PLA2 and composite PLA/hydroxyapatite (PLA/HAp) scaffolds printed with a Pharaoh XD 20. PLA/HAp filament was created with hot-melt extrusion (HME) equipment. The morphology of the prepared scaffolds was investigated with SEM, micro-CT and superimposition techniques, gravimetric and liquid displacement methods. RESULTS: Layer heights of PLA1 scaffolds varied the most. PLA1 scaffold volume statistically significantly differed from PLA2 (p < 0.001) and PLA/HAp (p < 0.01) groups. Filament composition had no effect on the volumes of the scaffolds printed with the Pharaoh XD 20 printer (p > 0.05). The total porosity of printed PLA/HAp scaffolds deviated the least from the original STL model. CONCLUSIONS: This study showed that PLA/10% HAp filament fabricated with HME and printed with FFF 3D printer produced equal or even better accuracy of printed scaffolds than scaffolds printed with pure PLA filament. Further research is needed to analyze the effect of HAp on 3D scaffold morphology, accuracy, mechanical and biologic properties.
Assuntos
Durapatita , Alicerces Teciduais , Poliésteres , Porosidade , Impressão Tridimensional , Engenharia TecidualRESUMO
Topography of the scaffold is one of the most important factors defining the quality of artificial bone. However, the production of precise micro- and nano-structured scaffolds, which is known to enhance osteogenic differentiation, is expensive and time-consuming. Meanwhile, little is known about macro-patterns (larger than cell diameter) effect on cell fate, while this kind of structures would significantly facilitate the manufacturing of artificial skeleton. Therefore, this research is focused on polylactic acid scaffold's macro-pattern impact on rat's dental pulp stem cells (DPSCs) morphology, proliferation, and osteogenic differentiation. For this study, two types of scaffolds were 3D printed: wavy and porous. Wavy scaffolds consisted of 188 µm wide joined threads, meaning that cells might have been curved on the filament as well as compressed in the groove. Porous scaffolds were designed to avoid groove formation and consisted of 500 µm threads, arranged in the woodpile manner, forming 300 µm diameter pores. We found that both macro-surfaces influenced DPSC morphology compared to control. As a consequence, enhanced DPSC proliferation and increased osteogenic differentiation potential was registered in cells grown on these scaffolds. Finally, our results showed that the construction of an artificial bone did not necessarily require the precise structuring of the scaffold, because both types of macro-topographic PLA scaffolds were sufficient enough to induce spontaneous DPSC osteogenic differentiation. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 174-186, 2019.
Assuntos
Diferenciação Celular , Osteogênese , Poliésteres/química , Células-Tronco/metabolismo , Alicerces Teciduais/química , Animais , Tamanho Celular , Polpa Dentária , Porosidade , Ratos , Células-Tronco/citologiaRESUMO
Hybrid organometallic polymers are a class of functional materials which can be used to produce structures with sub-micron features via laser two-photon polymerisation. Previous studies demonstrated the relative biocompatibility of Al and Zr containing hybrid organometallic polymers in vitro. However, a deeper understanding of their effects on intracellular processes is needed if a tissue engineering strategy based on these materials is to be envisioned. Herein, primary rat myogenic cells were cultured on spin-coated Al and Zr containing polymer surfaces to investigate how each material affects the viability, adhesion strength, adhesion-associated protein expression, rate of cellular metabolism and collagen secretion. We found that the investigated surfaces supported cellular growth to full confluency. A subsequent MTT assay showed that glass and Zr surfaces led to higher rates of metabolism than did the Al surfaces. A viability assay revealed that all surfaces supported comparable levels of cell viability. Cellular adhesion strength assessment showed an insignificantly stronger relative adhesion after 4 h of culture than after 24 h. The largest amount of collagen was secreted by cells grown on the Al-containing surface. In conclusion, the materials were found to be biocompatible in vitro and have potential for bioengineering applications.