Zeolite/Polymer Composites Prepared by Photopolymerization: Effect of Compensation Cations on Opacity and Gas Adsorption Applications.

The fabrication of structured zeolite adsorbents through photopolymerization-based 3D printing which offers a solution to the limitations of conventional shaping techniques has been demonstrated but many parameters still need to be optimized. In this study, we studied the influence of zeolite compensation cations on the photopolymerization and the composite's properties. Modified zeolites (LTA 4 A and FAU 13X exchanged with K+ , Li+ , Sr2+ , Ca2+ or Mg2+ ) were incorporated in PEGDA with BDMK as photoinitiator, and the formulation was cured under mild conditions (LED@405 nm, room temperature, under air). Our results indicate that the nature of zeolite compensation cations affects the colorimetric properties of polymer/zeolite composites: a better translucency parameter results in higher depth of cure. After calcination at 650 °C and complete removal of PEGDA, pure zeolitic monoliths were tested for adsorption of gas molecules of interest (carbon dioxide, dichlorobenzene and water). Structured 4 A and 13X monoliths obtained by 3D printing exhibit comparable adsorption capacity to commercial beads prepared from the same zeolites. This study enhances our understanding of the photopolymerization process involved in the production of polymer/zeolite composites. These composites are used in the fabrication of zeolitic objects through 3D printing, offering potential solutions to various environmental and dental challenges.

Radical photoinitiation with LEDs and applications in the 3D printing of composites.

Radical initiation upon LED light irradiation is discussed herein as well as its application in additive manufacturing. The ability of manufacturing complex structures, freedom of design, low energy consumption, fast prototyping, and excellent spatial resolution are the main benefits of the 3D printing technology by photopolymerization. Therefore, the 3D printing of composites through photopolymerization processes is developing rapidly in the academia and industry, and has been a turning point of additive manufacturing (AM). In the present review, an overview of radical initiation with LEDs (i.e., the photopolymerization LED technology, the photoinitiating systems, and the polymerizable media) and of the main 3D printing methods by photopolymerization, materials, and their applications in different fields has been carried out. As a challenging topic, the issue of light penetration in a filled matrix for the access to composites is discussed, including the light transmittance of the composite, the mismatch of the refractive index between the filler and the monomer, the factors of the filler, and the adverse influence of low light penetration on the 3D printing process. In particular, the popular applications of 3D printing by photopolymerization in biomedical science, electronic industry, materials for adsorption, and 4D printing are discussed. Overall, this review gives an overview of the 3D printing of polymer matrix composites through photopolymerization processes as a benchmark for future research and development.

Comparison of the behavior of metal-organic frameworks and zeolites for hydrocarbon separations.

The objective of this work was to study the adsorption and separation of the most important families of hydrocarbon compounds on metal-organic frameworks (MOFs), in comparison with zeolites. For this purpose, we have selected four probe molecules, each of them representing one of these families, i.e., o- and p-xylene as aromatics, 1-octene as an alkene, and n-octane as an alkane. The separation of these four molecules was studied by binary breakthrough experiments. To represent the large diversity of MOF structures, the experiments were carried out with (i) two MOFs with coordinatively unsaturated metal sites (CUS), i.e., Cu-btc (HKUST-1) and CPO-27-Ni, (ii) a MOF with an anionic framework and extraframework cations, i.e. RHO-ZMOF, and (iii) two rather apolar zeolitic imidazolate framework (ZIF) materials with different pore sizes, i.e. ZIF-8 and ZIF-76. Zeolite NaY and zeolite ß were used as polar and apolar reference adsorbents, respectively. The results can be briefly summarized as follows: ZIFs (not carrying any polar functional groups) behave like apolar adsorbents and exhibit very interesting and unexpected molecular sieving properties. CUS-MOFs behave like polar adsorbents but show the specificity of preferring alkenes over aromatics. This feature is rationalized thanks to DFT+D calculations. MOFs with extraframework cations behave like polar (cationic) zeolites.

Core-shell H-ZSM-5/silicalite-1 composites: Brønsted acidity and catalyst deactivation at the individual particle level.

A combination of in situ UV-Vis and confocal fluorescence micro-spectroscopy is applied to investigate the influence of an external silicalite-1 shell on the Brønsted acidity and coke formation process of individual H-ZSM-5 zeolite crystals. Three probe reactions were used: oligomerization of styrene, methanol-to-olefin (MTO) conversion and aromatization of light naphtha (LNA) derivatives. Oligomerization of styrene leads to the formation of optically active carbocationic oligomers. Different styrene substitutions indicate the conversion ability of the catalyst acid core, a preferred alignment of the oligomers within the straight zeolite channels and a Brønsted acidity gradient throughout the zeolite crystal. Both the MTO conversion and the LNA process lead to limited carbonaceous deposition within the external silicalite-1 layer. This outer shell furthermore prevents the growth of extended coke species at the zeolite external surface. During MTO, the formation of carbonaceous compounds initiates at the center of the H-ZSM-5 zeolite core and expands towards the zeolite exterior. This coke build-up starts with a 420 nm UV-Vis absorption band, assigned to methyl-substituted aromatic carbocations, and a second band around 550 nm, which is indicative of their growth towards larger conjugated systems. Aromatization of linear and branched C5 paraffins causes negligible darkening of the zeolite crystals though it forms fluorescent coke deposits and their precursors within the H-ZSM-5 catalyst. Olefin homologues on the contrary cause pronounced darkening of the zeolite composite. Methyl-branching of these reactants slows down the coke formation rate and produces carbonaceous species that are more restricted in their molecular size.

Adsorption of CO(2), CH(4), and N(2) on zeolitic imidazolate frameworks: experiments and simulations.

Experimental measurements and molecular simulations were conducted for two zeolitic imidazolate frameworks, ZIF-8 and ZIF-76. The transferability of the force field was tested by comparing molecular simulation results of gas adsorption with experimental data available in the literature for other ZIF materials (ZIF-69). Owing to the good agreement observed between simulation and experimental data, the simulation results can be used to identify preferential adsorption sites, which are located close to the organic linkers. Topological mapping of the potential-energy surfaces makes it possible to relate the preferential adsorption sites, Henry constant, and isosteric heats of adsorption at zero coverage to the nature of the host-guest interactions and the chemical nature of the organic linker. The role played by the topology of the solid and the organic linkers, instead of the metal sites, upon gas adsorption on zeolite-like metal-organic frameworks is discussed.

New functionalized MIL-53(In) solids: syntheses, characterization, sorption, and structural flexibility.

The syntheses and characterization of a series of functionalized MIL-53(In) solids have been reported. Chemical groups with variations in steric hindrance and chemical nature (-(OH)2, -Br or -NO2 groups) were introduced through the terephthalate linker to modify the pore surface. Single crystal X-ray diffraction data, N2 adsorption-desorption isotherms, and infrared spectra were systematically investigated to explore the impact of the functional groups grafted onto the organic linker on the dynamic behaviour of these highly flexible hybrid porous frameworks. Owing to the distinctive steric hindrance and chemical nature, the different substituents can influence the interactions between the framework and the trapped molecules, further influencing the flexibility of the materials. Dihydroxyl modified MIL-53(In) exhibits no nitrogen accessible porosity. Notably, functionalization by -Br and -NO2 groups leads to the different capabilities of the corresponding solids to accommodate N2 molecules.

Bio-sourced phosphoprotein-based synthesis of silver-doped macroporous zinc phosphates and their antibacterial properties.

The usual sources of phosphorus for metal phosphates are obtained from phosphate rocks, of which resources are depleted. As a substitute for these mineral sources, an original method of synthesis has been developed to prepare macroporous zinc phosphates using casein phosphoprotein. This bio-sourced reactant plays during the synthesis the roles of both a phosphorus source and a reducing agent for silver nanoparticles. Thus, zinc phosphates loaded with different Ag contents (up to 6.4 wt%) are prepared via hydrothermal treatment at 100 °C. Silver nanoparticles co-crystallized with hopeite, Zn3(PO4)2 and/or Zn2P2O7. In addition, casein induces porosity within the zinc phosphate framework and provides macropores (diameter of >50 nm) during calcination. The antibacterial properties against Escherichia coli K12 bacteria of Ag-containing and Ag-free porous zinc phosphates (calcined at 750 °C) were also tested for the first time.

Adsorption of 1,2-dichlorobenzene and 1,2,4-trichlorobenzene in nano- and microsized crystals of MIL-101(Cr): static and dynamic gravimetric studies.

This work aims to highlight the promising adsorption capacity and kinetic of (poly)chlorobenzene pollutants in the hybrid MIL-101(Cr) type material for technological uses in industrial waste exhaust decontamination. The influence of the MIL-101(Cr) crystal size (nano- and microcrystals) on the adsorption behavior was studied in static and dynamic modes. For this purpose, crystals of MIL-101(Cr) in nano- and micrometric sizes were synthesized and fully characterized. Their sorption properties regarding 1,2-dichlorobenzene were examined using gravimetric method in dynamic (p/p° = 0.5) and static (p/p° = 1) modes at room temperature. 1,2,4-trichlorobenzene adsorption was only performed under static mode because of its too low vapor pressure. 1,2-dichlorobenzene and 1,2,4-trichlorobenzene were used to mimic 2,3-dichlorodibenzo-p-dioxin and 1,2,3,4-tetrachlorodibenzo-p-dioxin, respectively, and more largely dioxin compounds. Adsorptions of these probes were successfully carried out in nano- and microcrystals of MIL-101(Cr). Indeed, in static mode (p/p° = 1) and at room temperature, nanocrystals adsorb 2266 molecules of 1,2-dichlorobenzene and 2093 molecules of 1,2,4-trichlorobenzene per unit cell, whereas microcrystals adsorb 1871 molecules of 1,2-dichlorobenzene and 1631 molecules of 1,2,4-trichlorobenzene per unit cell. In dynamic mode, the 1,2-dichlorobenzene adsorbed amounts are substantially similar to those obtained in static mode. However, the adsorption kinetics are different because of a different scheme of diffusivity of the adsorbate between the two modes. To the best of our knowledge, these adsorption capacities of MIL-101(Cr) as adsorbent for polychlorobenzenes trapping have never been referenced. MIL-101(Cr) appears as a promising material for technological uses in industrial waste exhaust decontamination.

IM-19: a new flexible microporous gallium based-MOF framework with pressure- and temperature-dependent openings.

Five metal-organic frameworks (MOFs) based on the same three-dimensional gallium terephthalate network (IM-19) are described, and an incommensurate structure (for the as-synthesized form) as well as two remarkable guest-free polymorphs (open and closed) are highlighted.

Hydrothermal synthesis and characterization of the new layered fluorogallophosphate mu-23.

Mu-23, [(C(6)H(15)N(2))(C(6)H(16)N(2))Ga(5)F(6)(H(2)O)(2)(PO(4))(4)] x 4 H(2)O, the first layered fluorinated gallophosphate with a Ga/P molar ratio of 5:4, was obtained in the presence of fluoride ions with 1,4-dimethylpiperazine as an organic template. It crystallizes in the triclinic space group P1 (no. 2) with unit cell parameters a=8.735(11), b=8.864(5), c=12.636(10) A, alpha=98.36(5), beta=100.18(8), gamma=115.84(7) degrees. The layers consist of GaO(2)F(3)(H(2)O), GaO(4)F(2) octahedra, and GaO(4) and PO(4) tetrahedra; these moieties share their oxygen and some of their fluorine atoms. The connectivity scheme of these different polyhedra leads to the formation of eight-membered rings.

Synthesis and crystal structure of IM-6, a new open framework cobalt-gallium phosphate with ten- and twelve-membered pore openings.

A new three-dimensional microporous cobalt-gallium phosphate, named IM-6, has been synthesized under solvothermal conditions with an N-substituted piperazine as organic template. The structure was solved by single-crystal X-ray diffraction (triclinic, P(-)1, a=9.848(20), b=12.470(32), c=12.603(28)A, alpha=63.47(16) degrees, beta=74.56(16) degrees, gamma=76.03(17) degrees). IM-6 exhibits a new framework topology. The inorganic framework is built up of MO(4) (M=Co, Ga) and PO(4) tetrahedra. It displays a two-dimensional interconnected channel system running along the [0(-)11] and [100] directions and delimited by ten- and twelve-membered ring openings, respectively.