RESUMO
Inorganic-organic hybrid materials represent a large share of newly reported structures, owing to their simple synthetic routes and customizable properties1. This proliferation has led to a characterization bottleneck: many hybrid materials are obligate microcrystals with low symmetry and severe radiation sensitivity, interfering with the standard techniques of single-crystal X-ray diffraction2,3 and electron microdiffraction4-11. Here we demonstrate small-molecule serial femtosecond X-ray crystallography (smSFX) for the determination of material crystal structures from microcrystals. We subjected microcrystalline suspensions to X-ray free-electron laser radiation12,13 and obtained thousands of randomly oriented diffraction patterns. We determined unit cells by aggregating spot-finding results into high-resolution powder diffractograms. After indexing the sparse serial patterns by a graph theory approach14, the resulting datasets can be solved and refined using standard tools for single-crystal diffraction data15-17. We describe the ab initio structure solutions of mithrene (AgSePh)18-20, thiorene (AgSPh) and tethrene (AgTePh), of which the latter two were previously unknown structures. In thiorene, we identify a geometric change in the silver-silver bonding network that is linked to its divergent optoelectronic properties20. We demonstrate that smSFX can be applied as a general technique for structure determination of beam-sensitive microcrystalline materials at near-ambient temperature and pressure.
Assuntos
Elétrons , Prata , Cristalografia por Raios X , Lasers , Difração de Raios XRESUMO
Mechanical stimuli can modify the energy landscape of chemical reactions and enable reaction pathways, offering a synthetic strategy that complements conventional chemistry. These mechanochemical mechanisms have been studied extensively in one-dimensional polymers under tensile stress using ring-opening and reorganization, polymer unzipping and disulfide reduction as model reactions. In these systems, the pulling force stretches chemical bonds, initiating the reaction. Additionally, it has been shown that forces orthogonal to the chemical bonds can alter the rate of bond dissociation. However, these bond activation mechanisms have not been possible under isotropic, compressive stress (that is, hydrostatic pressure). Here we show that mechanochemistry through isotropic compression is possible by molecularly engineering structures that can translate macroscopic isotropic stress into molecular-level anisotropic strain. We engineer molecules with mechanically heterogeneous components-a compressible ('soft') mechanophore and incompressible ('hard') ligands. In these 'molecular anvils', isotropic stress leads to relative motions of the rigid ligands, anisotropically deforming the compressible mechanophore and activating bonds. Conversely, rigid ligands in steric contact impede relative motion, blocking reactivity. We combine experiments and computations to demonstrate hydrostatic-pressure-driven redox reactions in metal-organic chalcogenides that incorporate molecular elements that have heterogeneous compressibility, in which bending of bond angles or shearing of adjacent chains activates the metal-chalcogen bonds, leading to the formation of the elemental metal. These results reveal an unexplored reaction mechanism and suggest possible strategies for high-specificity mechanosynthesis.
RESUMO
Controlling inorganic structure and dimensionality through structure-directing agents is a versatile approach for new materials synthesis that has been used extensively for metal-organic frameworks and coordination polymers. However, the lack of 'solid' inorganic cores requires charge transport through single-atom chains and/or organic groups, limiting their electronic properties. Here, we report that strongly interacting diamondoid structure-directing agents guide the growth of hybrid metal-organic chalcogenide nanowires with solid inorganic cores having three-atom cross-sections, representing the smallest possible nanowires. The strong van der Waals attraction between diamondoids overcomes steric repulsion leading to a cis configuration at the active growth front, enabling face-on addition of precursors for nanowire elongation. These nanowires have band-like electronic properties, low effective carrier masses and three orders-of-magnitude conductivity modulation by hole doping. This discovery highlights a previously unexplored regime of structure-directing agents compared with traditional surfactant, block copolymer or metal-organic framework linkers.
Assuntos
Calcogênios/química , Diamante/química , Condutividade Elétrica , Estruturas Metalorgânicas/química , Nanodiamantes/química , Nanotecnologia/métodos , Nanofios/química , Modelos Moleculares , Conformação MolecularRESUMO
Two-dimensional (2D) organic-inorganic perovskites have rapidly become an attractive alternative to traditional three-dimensional (3D) perovskite solar-cell absorbers owing to their improved stability and processability. Despite their advantages, the insulating nature of the organic cations and diminished light absorption limit their overall performance. Herein, it is demonstrated that the incorporation of conjugated diynes in hybrid 2D perovskites, and subsequent thermal treatment results in the formation of 2D perovskites that incorporate polydiacetylenes in their structure. Furthermore, it is shown that oxygen or iodine doping results in the formation of stable radicals within the material alongside a drastic shift of the band gap from 3.0 to 1.4â eV and in-plane conductivity improvements of up to three orders of magnitude, which lead to record conductivities for 2D halide perovskites (n=1).
RESUMO
Since the establishment of perovskite solar cells (PSCs), there has been an intense search for alternative materials to replace lead and improve their stability toward moisture and light. As single-metal perovskite structures have yielded unsatisfactory performances, an alternative is the use of double perovskites that incorporate a combination of metals. To this day, only a handful of these compounds have been synthesized, but most of them have indirect bandgaps and/or do not have bandgaps energies well-suited for photovoltaic applications. Here we report the synthesis and characterization of a unique mixed metal ⟨111⟩-oriented layered perovskite, Cs4CuSb2Cl12 (1), that incorporates Cu2+ and Sb3+ into layers that are three octahedra thick (n = 3). In addition to being made of abundant and nontoxic elements, we show that this material behaves as a semiconductor with a direct bandgap of 1.0 eV and its conductivity is 1 order of magnitude greater than that of MAPbI3 (MA = methylammonium). Furthermore, 1 has high photo- and thermal-stability and is tolerant to humidity. We conclude that 1 is a promising material for photovoltaic applications and represents a new type of layered perovskite structure that incorporates metals in 2+ and 3+ oxidation states, thus significantly widening the possible combinations of metals to replace lead in PSCs.
RESUMO
The tools of synthetic chemistry allow us to fine-tune the reactivity of molecules at a level of precision not yet accessible with inorganic solids. We have investigated hybrids that couple molecules to the superior thermal and mechanical properties of solids. Herein we present, to the best of our knowledge, the first demonstration of reactivity between hybrid perovskites and substrates. Reaction with iodine vapor results in a remarkable expansion of these materials (up to 36 % in volume) where new covalent CI bonds are formed with retention of crystallinity. These hybrids also show unusual examples of reversible chemisorption. Here, solid-state interactions extend the lifetime of molecules that cannot be isolated in solution. We have tuned the half-lives of the iodinated structures from 3â h to 3â days. These nonporous hybrids drive substrate capture and controlled release through chemical reactivity. We illustrate the strengths of the hybrid by considering radioactive iodine capture.
RESUMO
The activation of O2 is a key step in selective catalytic aerobic oxidation reactions mediated by transition metals. The bridging trinuclear palladium species, [(LPd(II))3(µ(3)-O)2](2+) (L=2,9-dimethylphenanthroline), was identified during the [LPd(OAc)]2(OTf)2-catalyzed aerobic oxidation of 1,2-propanediol. Independent synthesis, structural characterization, and catalytic studies of the trinuclear compound show that it is a product of oxygen activation by reduced palladium species and is a competent intermediate in the catalytic aerobic oxidation of alcohols. The formation and catalytic activity of the trinuclear Pd3O2 species illuminates a multinuclear pathway for aerobic oxidation reactions catalyzed by Pd complexes.
Assuntos
Paládio/química , Álcoois/química , Catálise , Complexos de Coordenação/química , Cristalografia por Raios X , Mesilatos/química , Conformação Molecular , OxirreduçãoRESUMO
Two-dimensional hybrid perovskites are used as absorbers in solar cells. Our first-generation devices containing (PEA)2(MA)2[Pb3I10] (1; PEA=C6H5(CH2)2NH3(+), MA=CH3NH3(+)) show an open-circuit voltage of 1.18â V and a power conversion efficiency of 4.73%. The layered structure allows for high-quality films to be deposited through spin coating and high-temperature annealing is not required for device fabrication. The 3Dâ perovskite (MA)[PbI3] (2) has recently been identified as a promising absorber for solar cells. However, its instability to moisture requires anhydrous processing and operating conditions. Films of 1 are more moisture resistant than films of 2 and devices containing 1 can be fabricated under ambient humidity levels. The larger bandgap of the 2Dâ structure is also suitable as the higher bandgap absorber in a dual-absorber tandem device. Compared to 2, the layered perovskite structure may offer greater tunability at the molecular level for material optimization.
RESUMO
CsPbBr3 nanocrystals (NCs) are promising optoelectronic and catalytic materials. Manipulating their morphology can improve their properties and stability. In this work, an alkene-derived zwitterionic ligand was used to control the morphology of CsPbBr3 NCs to yield the highly unusual rhombicuboctahedron morphology, showcasing the first example of a surfactant-tail controlled growth.
RESUMO
The Al(III)-based MOF CYCU-3 exhibits a relevant SO2 adsorption performance with a total uptake of 11.03 mmol g-1 at 1 bar and 298 K. CYCU-3 displays high chemical stability towards dry and wet SO2 exposure. DRIFTS experiments and computational calculations demonstrated that hydrogen bonding between SO2 molecules and bridging Al(III)-OH groups are the preferential adsorption sites. In addition, photoluminescence experiments demonstrated the relevance of CYCU-3 for application in SO2 detection with good selectivity for SO2 over CO2 and H2O. The change in fluorescence performance demonstrates a clear turn-on effect after SO2 interaction. Finally, the suppression of ligand-metal energy transfer along with the enhancement of ligand-centered π* â π electronic transition was proposed as a plausible fluorescence mechanism.
RESUMO
SO2 emissions not only affect local air quality but can also contribute to other environmental issues. Developing low-cost and robust adsorbents with high uptake and selectivity is needed to reduce SO2 emissions. Here, we show the SO2 adsorption-desorption capacity of carbon microfibers (CMFs) at 298 K. CMFs showed a reversible SO2 uptake capacity (5 mmol g-1), cyclability over ten adsorption cycles with fast kinetics and good selectivity towards SO2/CO2 at low-pressure values. Additionally, CMFs' photoluminescence response to SO2 and CO2 was evaluated.
RESUMO
The development of adsorbents for air pollutant remediation and effective monitoring is of interest. Then, the effect of the APTES functionalization ratio on the impact of the adsorption and detection of SO2 molecules was evaluated. The higher APTES functionalization material (SBA-15_6.1APTES) shows a high uptake of 1.15 mmol g-1 at 0.001 bar and 298 K. Fluorescence, time-resolved photoluminescence, and quantum yield experiments revealed a turn-on effect specifically for SO2 molecules, indicating high selectivity, suggesting host-to-guest energy transfer. Attractively, XPS measurement provided an understanding of the mechanism, suggesting hydrogen bonding and dipole-dipole interactions as the main interactions between SO2 molecules and SBA-15_6.1APTES. DFT calculations were performed to confirm these interactions. Furthermore, this study highlights the application of SBA-15 materials with different amino modifications for SO2 treatment and provides insight into the interaction mechanism using experimental techniques.
RESUMO
The synthesis and stabilization of alumo- and gallodisilicates [HC{C(Me)N(2,6-iPr2C6H3)}2]M[(µ-O)Si(OH)(OtBu)2]2 [M = Al (1), Ga (2)] containing two silicate subunits have been achieved through reactions between 2 equiv of the silanediol (tBuO)2Si(OH)2 and the aluminum hydride [HC{C(Me)N(2,6-iPr2C6H3)}2]AlH2 or the gallium amide [HC{C(Me)N(2,6-iPr2C6H3)}2]Ga(NHEt)2, respectively. Compounds 1 and 2 exhibit M(O-SiO2-OH)2 moiety and represent the first molecular metallosilicate-based analogues of neighboring silanol groups found in silicate surfaces. The substitution of both SiOH groups led to the formation of bimetallic compounds with 4R topologies, which are regularly found in zeolitic materials. Thus, reactions between group 4 metal amides M'(NEt2)4 (M' = Ti, Zr, Hf) and 1 and 2 resulted in the formation of nine heterometallic silicates (3-11) containing inorganic M(O-Si-O)2M' and [M(O-Si-O)2]2M' cores with 4R and spiro-4R topologies, respectively. The latter have M···M distances of 0.81 nm. NMR studies of the heterometallic derivatives showed a fluxional behavior at room temperature due to a high flexibility of the eight-membered ring.
RESUMO
Two-dimensional (2D) organic-inorganic hybrid perovskites have rapidly become an attractive alternative to three-dimensional (3D) perovskites as solar cell absorbers, owing to their improved stability, versatility, and ease of processing. Despite their advantages, the insulating nature of the organic cations makes these materials have lower absorbing and conducting properties, resulting in lower device efficiencies. A way to circumvent these issues is the integration of functional molecules that help mitigate these limitations. In this study, six new perovskites composed of three distinct diynes are synthesized, all of which can be thermally polymerized to form conjugated polymers within the perovskite layers. The incorporation of conjugated polymers results in drastic changes in these materials' optoelectronic properties and their overall stability. Furthermore, depending on the nature of the diyne and the inorganic layers, the materials show varying polymerization yields, optical bandgaps, and charge carrier densities. These results afford significant insight into the chemical nature of the polymerized species and thus highlight the versatility of this approach to post-synthetically generate conducting polymers within the layers of 2D perovskites, paving the way toward their use in optoelectronic devices.
RESUMO
Modulated self-assembly protocols are used to develop facile, HF-free syntheses of the archetypal flexible PCP, MIL-53(Cr), and novel isoreticular analogues MIL-53(Cr)-Br and MIL-53(Cr)-NO2. All three PCPs show good SO2 uptake (298 K, 1 bar) and high chemical stabilities against dry and wet SO2. Solid-state photoluminescence spectroscopy indicates all three PCPs exhibit turn-off sensing of SO2, in particular MIL-53(Cr)-Br, which shows a 2.7-fold decrease in emission on exposure to SO2 at room temperature, indicating potential sensing applications.
RESUMO
The MOF-type Ni2(dobpdc) shows a high chemical stability towards SO2, high capacity for SO2 capture at low pressure (4.3 mmol g-1 at 298 K and up to 0.05 bar), and exceptional cycling performance. Fluorescence experiments demonstrated the SO2 detection properties of Ni2(dobpdc) with a remarkable SO2 detection selectivity. Finally, time-resolved photoluminescence experiments provided a plausible mechanism of SO2 detection by this Ni(II)-based MOF material.
RESUMO
A non-porous version of SU-101 (herein n-SU-101) was evaluated for the CO2 cycloaddition reaction. The findings revealed that open metal sites (Bi3+) are necessary for the reaction. n-SU-101 displays a high styrene oxide conversion of 96.6% under mild conditions (3 bar and 80 °C). The catalytic activity of n-SU-101 demonstrated its potential application for the cycloaddition of CO2 using styrene oxide.
RESUMO
The SO2 adsorption-desorption capacity at room temperature and 1 bar of the metal-organic polyhedron MOP-CDC was investigated. In addition, the qualitative solid-state absorption-emission properties of this material (before and after SO2 exposure) were measured and tested, and it demonstrated remarkable capability for SO2 detection. Our results represent the first example of fluorimetric SO2 detection in a MOP.
Assuntos
Metais , AdsorçãoRESUMO
Crystallization of Na(2)VOP(2)O(7) from its aqueous solution results in formation of a one-dimensional inorganic polymer {Na(2)VO(H(2)O)P(2)O(7)·7H(2)O}(n) (1). When this polymer is dehydrated at elevated temperatures this polymer undergoes a phase transition to form the two-dimensional framework ß-Na(2)VOP(2)O(7), which although previously reported had been difficult to access. Exchanging lithium for sodium via ion-exchange chromatography results in formation of a discrete, cyclic, tetramer species, Li(8)[VOP(2)O(7)(H(2)O)·4H(2)O](4) (2). Isolation of crystalline ß-Li(2)VOP(2)O(7) using a dehydration procedure analogous to the one employed for the sodium derivative was unsuccessful. In contrast, we show that ß-K(2)VOP(2)O(7) can be obtained from the amorphous phase K(2)VOP(2)O(7)·nH(2)O (n = 0-7) upon thermal dehydration.
Assuntos
Técnicas de Química Sintética/métodos , Difosfatos/química , Compostos Organometálicos/química , Compostos Organometálicos/síntese química , Vanádio/química , Modelos Moleculares , Conformação Molecular , TemperaturaRESUMO
Reaction between the silanediol (HO)(2)Si(OtBu)(2) and gallium amides, LGaCl(NHtBu) and LGa(NHEt)(2) (L = [HC{C(Me)N(Ar)}(2)](-), Ar = 2,6-iPr(2)C(6)H(3)), respectively, resulted in the facile isolation of molecular gallosilicates LGaCl(µ-O)Si(OH)(OtBu)(2) (1) and LGa(NHEt)(µ-O)Si(OH)(OtBu)(2) (2). Compound 2 easily reacts with 1 equiv of water to form the unique gallosilicate-hydroxide LGa(OH·THF)(µ-O)Si(OH)(OtBu)(2) (3). Compounds 1-3 contain the simple Ga-O-SiO(3) framework and are the first structurally authenticated molecular gallosilicates. These compounds may be used not only as models for gallosilicate-based materials but also as further reagents because of the presence of reactive functional groups attached to both gallium and silicon atoms. Accordingly, seven molecular heterometallic compounds were obtained from the reactions between compound 3 and group 4 amides M(NMe(2))(4) (M = Ti, Zr) or M(NEt(2))(4) (M = Ti, Zr, Hf). Hence, by tuning the reactions conditions and stoichiometries, it was possible to isolate and structurally characterize the complete 1:1 and 2:1 series (4-10). Completely inorganic cores of types M-O-Ga-O-Si-O and spiro M[O-Ga-O-Si-O](2) were obtained and characterized by common spectroscopic techniques.