RESUMO
A method for spectral reflectance factor reconstruction based on wideband multi-illuminant imaging was proposed, using a programmable LED lighting system and modified Bare Bones Particle Swarm Optimization algorithms. From a set of 16 LEDs with different spectral power distributions, nine light sources with correlated color temperatures in the range of 1924 K - 15746 K, most of them daylight simulators, were generated. Samples from three color charts (X-Rite ColorChecker Digital SG, SCOCIE ScoColor paint chart, and SCOCIE ScoColor textile chart), were captured by a color industrial camera under the nine light sources, and used in sequence as training and/or testing colors. The spectral reconstruction models achieved under multi-illuminant imaging were trained and tested using the canonical Bare Bones Particle Swarm Optimization and its proposed modifications, along with six additional and commonly used algorithms. The impacts of different illuminants, illuminant combinations, algorithms, and training colors on reconstruction accuracy were studied comprehensively. The results indicated that training colors covering larger regions of color space give more accurate reconstructions of spectral reflectance factors, and combinations of two illuminants with a large difference of correlated color temperature achieve more than twice the accuracy of that under a single illuminant. Specifically, the average reconstruction error by the method proposed in this paper for patches from two color charts under A + D90 light sources was 0.94 and 1.08 CIEDE2000 color difference units. The results of the experiment also confirmed that some reconstruction algorithms are unsuitable for predicting spectral reflectance factors from multi-illuminant images due to the complexity of optimization problems and insufficient accuracy. The proposed reconstruction method has many advantages, such as being simple in operation, with no requirement of prior knowledge, and easy to implement in non-contact color measurement and color reproduction devices.
RESUMO
A psychophysical experiment using 3D printed samples was conducted to investigate the change of perceived color differences caused by two different illuminations and two 3D sample shapes. 150 pairs of 3D printed samples around five CIE color centers [Color Res. Appl. 20, 399-403, 1995], consisting of 75 pairs of spherical samples and 75 pairs of flat samples, with a wide range of color differences covering from small to large magnitude, were printed by an Mcor Iris paper-based 3D color printer. Each pair was assessed twice by a panel of 10 observers using a gray-scale psychophysical method in a spectral tunable LED viewing cabinet with two types of light sources: diffuse lighting with and without an additional overhead spotlight. The experimental results confirmed that the lighting conditions had more effect on the perceived color difference between complex 3D shapes than between 2D objects. The results for 3D and 2D objects were more similar under only diffuse lighting. Current 3D results had good correlations with previous ones [Color Res. Appl. 24, 356-368, 1999; J. Opt. Soc. Am. A 36, 789-799, 2019] using 2D samples with large color differences, meaning that color-difference magnitude had more effect on perceived color differences than sample shape and lighting. Considering ten modern color-difference formulas, the best predictions of the current experimental data were found for CAM02-LCD formula [Color Res. Appl. 31, 320-330, 2006]. For current results, it was also found that predictions of current color-difference formulas were below average inter-observer variability, and remarkable improvements were found by adding power corrections [Opt. Express 23, 597-610, 2015].