RESUMO
Many unique adsorption properties of metal-organic frameworks (MOFs) have been revealed by diffraction crystallography, visualizing their vacant and guest-loaded crystal structures at the molecular scale. However, it has been challenging to see the spatial distribution of the adsorption behaviors throughout a single MOF particle in a transient equilibrium state. Here, we report three-dimensional (3D) visualization of molecular adsorption behaviors in a single crystalline particle of a MOF by in situ X-ray absorption fine structure spectroscopy combined with computed tomography for the first time. The 3D maps of water-coordinated Co sites in a 100 µm-scale MOF-74-Co crystal were obtained with 1 µm spatial resolution under several water vapor pressures. Through the visualization of the water vapor adsorption process, 3D spectroimaging revealed the mechanism and spatial heterogeneity of guest adsorption inside a single particle of a crystalline MOF.
RESUMO
The demand for powder X-ray diffraction analysis continues to increase in a variety of scientific fields, as the excellent beam quality of high-brightness synchrotron light sources enables the acquisition of high-quality measurement data with high intensity and angular resolution. Synchrotron powder diffraction has enabled the rapid measurement of many samples and various in situ/operando experiments in nonambient sample environments. To meet the demands for even higher throughput measurements using high-energy X-rays at SPring-8, a high-throughput and high-resolution powder diffraction system has been developed. This system is combined with six sets of two-dimensional (2D) CdTe detectors for high-energy X-rays, and various automation systems, including a system for automatic switching among large sample environmental equipment, have been developed in the third experimental hutch of the insertion device beamline BL13XU at SPring-8. In this diffractometer system, high-brilliance and high-energy X-rays ranging from 16 to 72â keV are available. The powder diffraction data measured under ambient and various nonambient conditions can be analysed using Rietveld refinement and the pair distribution function. Using the 2D CdTe detectors with variable sample-to-detector distance, three types of scan modes have been established: standard, single-step and high-resolution. A major feature is the ability to measure a whole powder pattern with millisecond resolution. Equally important, this system can measure powder diffraction data with high Q exceeding 30â Å-1 within several tens of seconds. This capability is expected to contribute significantly to new research avenues using machine learning and artificial intelligence by utilizing the large amount of data obtained from high-throughput measurements.
RESUMO
Ionic plastic crystals (IPCs), characterized by nearly spherical molecular ions, exhibit remarkable solid-state characteristics including high ionic conductivity. However, most IPCs are organic onium salts. Incorporating organometallic half-sandwich complexes into IPCs is challenging owing to their low-symmetry structures. This paper introduces a novel series of IPCs composed of salts derived from half-sandwich organometallic complexes. We synthesized five salts of [Ru(Cp)(tmeda)(CO)]X (tmeda = N,N,N',N'-tetramethyl-1,2-ethanediamine, X = anion) with different anions and examined their phase behavior, crystal structures, and molecular motion in the solid-state. Salts featuring the CPFSA (= 1,1,2,2,3,3-hexafluoropropane-1,3-disulfonimide), B(CN)4-, and FSA- (= (FSO2)2N-) anions underwent phase transitions to an IPC phase with a CsCl-type structure in the temperature range of 327-364 K. Employing smaller anions led to an increase in the transition temperature. In each salt, the coordination number, representing the number of anions surrounding one cation, remained eight in IPC and low-temperature phases. However, salts containing smaller anions (CF3BF3- and PF6-) displayed a rotator phase rather than the IPC phase. In these cases, the coordination numbers were six at low temperatures.
RESUMO
This study affords mechanistic insights into the formation mechanism of carbodiimide ions (NCN2-) from urea during the synthesis of La2O2NCN by employing the "proanion" strategy without using NH3 gas. It is a safer, cost-effective, and environmentally friendly approach. Urea, acting as a proanion, decomposes upon heating, facilitating conversion to NCN2-. This work meticulously examines the phase transitions and identifies intermediate species formed during the reaction using in situ X-ray diffraction, Fourier transform infrared spectroscopy, and thermogravimetric-differential thermal analysis-mass spectrometry. The findings present a detailed mechanism in which urea initially decomposes at 140 °C, releasing HNCO, which reacts with La(OH)3 to immobilize NCO- species on the surface of La(OH)3. As the temperature reaches approximately 400 °C, these NCO- anions transform into NCN2- anions by releasing CO2 gas, resulting in the formation of an amorphous phase rich in NCN2-. Following further heating to 600 °C, La2O2NCN crystallizes, enhancing its crystallinity as the temperature increases. These findings elucidate the formation mechanism of La2O2NCN, introduce the "proanion method" for the alternative synthesis of metal (oxy)carbodiimides, and expand their potential for applications as functional materials.
RESUMO
Proton-coupled electron transfer (PCET) is a ubiquitous and fundamental process in biochemistry and electrochemistry performed by transition-metal complexes. Most synthetic efforts have been devoted to selecting the components, that is, metal ions and ligands, to control the proton-electron coupling. Here, we show the first example of controlling the proton-electron coupling using the cis-trans metal-ligand isomerization in a π-planar platinum complex, Pt(itsq)2 (itsq1-: o-iminothiosemiquinonate). Both the isomers, which were obtained separately, were characterized by single-crystal X-ray diffraction, and the cis-to-trans isomerization was achieved by immersing in organic solvents. Theoretical calculations predicted that the proton-electron coupling evaluated from the energetic stabilization of the lowest unoccupied molecular orbital by protonation varies greatly depending on the geometrical configuration compared to the metal substitution.
RESUMO
We present a combined experimental and theoretical study of the nature of the proposed metal-metal bonding in the tetranuclear cluster Ni4(NPtBu3)4, which features four nickel(I) centers engaged in strong ferromagnetic coupling. High-resolution single-crystal synchrotron X-ray diffraction data collected at 25 K provide an accurate geometrical structure and a multipole model electron density description. Topological analysis of the electron density in the Ni4N4 core using the quantum theory of atoms in molecules clearly identifies the bonding as an eight-membered ring of type [Ni-N-]4 without direct Ni-Ni bonding, and this result is generally corroborated by an analysis of the energy density distribution. In contrast, the calculated bond delocalization index of â¼0.6 between neighboring Ni atoms is larger than what has been found for other bridged metal-metal bonds and implies direct Ni-Ni bonding. Similar support for the presence of direct Ni-Ni bonding is found in the interacting quantum atom approach, an energy decomposition scheme, which suggests the presence of stabilizing Ni-Ni bonding interactions with an exchange-correlation energy contribution approximately 50% of that of the Ni-N interactions. Altogether, while the direct interactions between neighboring Ni centers are too weak and sterically constrained to bear the signature of a topological bond critical point, other continuous measures clearly indicate significant Ni-Ni bonding. These metal-metal bonding interactions likely mediate direct ferromagnetic exchange, giving rise to the high-spin ground state of the molecule.
RESUMO
A one-dimensionalâ (1D) halogen-bridged dinuclear-metal complex (MMX-chain) exhibits various electronic states based on a mixed-valence metal-dimer system. This report deals with the synthesis and physical properties of a new MMX-chain with a bulky pendant ligand, Pt2 (mcc-HexCS2 )4 I (mcc-HexCS2 =trans-4-(methoxycarbonyl)cyclohexanedithiocarboxylate). The steric hindrance caused by the bulky substituent induces a strain in its 1D chain, achieving at ambient condition the first pure alternate charge-polarization (ACP) state (-Pt2+ -Pt3+ -I- -Pt3+ -Pt2+ -I- -), a kind of spin-Peierls state, as confirmed by X-ray diffraction and its conducting and magnetic properties. The strain effect is also manifested as a very large linear thermal expansion along the chain direction, which is quite different from conventional MMX-chains without a bulky ligand. The design of low-dimensional materials with ligand variations is expected to lead to the emergence of new electron-lattice coupled electronic states.
RESUMO
Glass-forming metal-organic frameworks (MOFs) have novel applications, but the origin of their peculiar melting behavior is unclear. Here, we report synchrotron X-ray diffraction electron densities of two zeolitic imidazolate frameworks (ZIFs), the glass-forming Zn-ZIF-zni and the isostructural thermally decomposing Co-ZIF-zni. Electron density analysis shows that the Zn-N bonds are more ionic than the Co-N bonds, which have distinct covalent features. Variable-temperature Raman spectra reveal the onset of significant imidazolate bond weakening in Co-ZIF-zni above 673â K. Melting can be controlled by tuning the metal-ligand and imidazole bonding strength as shown from thermal analysis of nine solid-solution Cox Zn1-x -ZIF-zni (x=0.3 to 0.003) MOFs, and a mere 4 % Co-doping into Zn-ZIF-zni results in thermal decomposition instead of melting. The present findings demonstrate the key role of the metal-ligand bonds and imidazolate bonds in controlling the delicate balance between melting and decomposition processes in this class of ZIF compounds.
RESUMO
The crystal interaction density is generally assumed to be a suitable measure of the polarization of a low-molecular weight ligand inside an enzyme, but this approximation has seldomly been tested and has never been quantified before. In this study, we compare the crystal interaction density and the interaction electrostatic potential for a model compound of loxistatin acid (E64c) with those inside cathepsinâ B, in solution, and in vacuum. We apply QM/MM calculations and experimental quantum crystallography to show that the crystal interaction density is indeed very similar to the enzyme interaction density. Less than 0.1â e are shifted between these two environments in total. However, this difference has non-negligible consequences for derived properties.
Assuntos
Elétrons , Ligantes , Preparações Farmacêuticas , Eletricidade EstáticaRESUMO
Metal string complexes, linearly aligned transition metal arrays coordinated with the multidentate organic ligands, have gained much attention both in unique electronic/structural properties and in potential applications as conductive molecular nanowires. Here we report on a dimerized NiII trinuclear complex, [Ni6Cl2(dpa)8](I5)2·0.25I2 (dpa- = 2,2'-dipyridylamide anion). X-ray structural analysis revealed that two trinuclear moieties are bridged by a Cl anion to form a dimerized string structure. This is the first example of two Ni string complexes that are connected. In the electronic absorption and Raman spectra, characteristic absorption bands and a vibration mode based on the dimer string structure were observed. In the solid state, dimer complexes align in one dimension in an MMMXMMMX (M = metal, X = halogen) manner, leading to the intra- and interdimer antiferromagnetic interactions.
RESUMO
The excited-state energy was tuned successfully by guest molecules in a cyanide-bridged luminescent coordination polymer (CP). Methanol or ethanol vapor reversibly and significantly changed the luminescent color of the CP between green and yellow (Δλem = 32 nm). These vapors did not significantly affect the environment around the luminophore in the ground state of the CP, whereas they modulated the excited states for the resulting bathochromic shift. The time-resolved photoluminescent spectra of the CP systems showed that solvent adsorption enhanced the energetic relaxation in the excited states. Furthermore, time-resolved infrared spectroscopy indicated that cyanide bridging in the CP became more flexible in the excited states than that in the ground state, highlighting the sensitivity of the excited states to external stimuli, such as the guest vapor. Overall, guest-tunable excited states will allow the more straightforward design of sensing materials by characterizing the transient excited states.
RESUMO
Control over the stacking patterns in 2D molecular assemblies is demonstrated using chemical modification. A target system is a hydrogen-bonded cocrystal (2:1) composed of 2-pyrrolidone (Py) and chloranilic acid (CA) (PyCA). X-ray crystallography showed that weak intersheet interactions give rise to a variety of metastable overlapping patterns comprised of the 2D assemblies mainly formed via hydrogen bonds, affording reversible and irreversible structural phase transitions. We prepared cocrystals of Py and anilic acids bearing different halogens, in which 2D assemblies isostructural with those observed in PyCA exhibit various overlapping patterns. The order of stability for each overlapping pattern estimated using calculations of the intermolecular interactions did not completely coincide with those indicated by our experimental results, which can be explained by considering the entropic effect: the molecular motion of Py as detected using nuclear quadrupole resonance spectroscopy.
RESUMO
Reticular framework materials thrive on designability, but unexpected reaction outcomes are crucial in exploring new structures and functionalities. By combining "incompatible" building blocks, we employed geometric frustration in reticular materials leading to emergent structural features. The combination of a pseudo-C5-symmetrical organic building unit based on a pyrrole core with a C4-symmetrical copper paddlewheel synthon led to three distinct frameworks by tuning the synthetic conditions. The frameworks show structural features typical for geometric frustration: self-limiting assembly, internally stressed equilibrium structures, and topological defects in the equilibrium structure, which manifested in formation of a hydrogen-bonded framework, distorted and broken secondary building units, and dangling functional groups, respectively. The influence of geometric frustration on the CO2 sorption behavior and the discovery of a new secondary building unit shows geometric frustration can serve as a strategy to obtain highly complex porous frameworks.
RESUMO
Recently, metal-organic frameworks (MOFs) composed of sulfur secondary building units (sulfur-SBUs) have attracted significant attention as unique electronic materials with high conductivities and photo- and electrocatalytic properties. Herein we report the crystal structure of KGF-1, an example of a Pb-MOF composed of three-dimensionally extended sulfur-SBUs that displays molecular sieving behavior, visible-light absorption, and a semiconductor band structure and is a hydrogen-evolution photocatalyst.
RESUMO
Toward the development of high-performance organic semiconductors (OSCs), carrier mobility is the most important requirement for next-generation OSC-based electronics. The strategy is that OSCs consisting of a highly extended π-electron core exhibit two-dimensional (2D) aggregated structures to offer effective charge transport. However, such OSCs, in general, show poor solubility in common organic solvents, resulting in limited solution processability. This is a critical trade-off between the development of OSCs with simultaneous high carrier mobility and suitable solubility. To address this issue, herein, five-membered ring-fused selenium-bridged V-shaped binaphthalene with decyl substituents (C10-DNS-VW) is developed and synthesized by an efficient method. C10-DNS-VW exhibits significantly high solubility for solution processes. Notably, C10-DNS-VW forms a one-dimensional π-stacked packing motif (1D motif) and a 2D herringbone (HB) packing motif (2D motif), depending on the crystal growth condition. On the other hand, the fabrication of thin films by means of both solution process and vacuum deposition techniques forms only the 2D HB motif. External stress tests such as heating and exposure to solvent vapor indicated that 1D and 2D motifs could be synergistically induced by the total balance of intermolecular interactions. Finally, the single-crystalline films of C10-DNS-VW by solution process exhibit carrier mobility up to 11 cm2 V-1 s-1 with suitable transistor stability under ambient conditions for more than two months, indicating that C10-DNS-VW is one of the most promising candidates for breaking the trade-off in the field of solution-processed technologies.
RESUMO
A single-beam optical-trap sample holder for X-ray diffraction measurements with synchrotron radiation has been developed. The sample holder was used to obtain an X-ray diffraction image of a single ZnO particle levitated in air, without mechanical contact, by the optical gradient force exerted by a focused laser beam. The diffraction image showed a Debye ring pattern, which was similar to a powder diffraction pattern of an assemblage of ZnO particles. While the ZnO particle is held by the optical trap in air, it rotates irregularly. Therefore, the Debye ring pattern of the ZnO particle can be clearly obtained even if the ZnO particle is a single grain. Lattice parameters and crystallite size of the single ZnO particle were determined simultaneously. The lattice parameters were determined to be a = 3.2505 ± 0.0005â Å and c = 5.207 ± 0.006â Å, which are consistent with those of the assemblage of ZnO particles. The crystallite size determined by the Scherrer method was 193.4 ± 26.2â nm.
RESUMO
A gas- and vapour-pressure control system synchronized with the continuous data acquisition of millisecond high-resolution powder diffraction measurements was developed to study structural change processes in gas storage and reaction materials such as metal organic framework compounds, zeolite and layered double hydroxide. The apparatus, which can be set up on beamline BL02B2 at SPring-8, mainly comprises a pressure control system of gases and vapour, a gas cell for a capillary sample, and six one-dimensional solid-state (MYTHEN) detectors. The pressure control system can be remotely controlled via developed software connected to a diffraction measurement system and can be operated in the closed gas and vapour line system. By using the temperature-control system on the sample, high-resolution powder diffraction data can be obtained under gas and vapour pressures ranging from 1â Pa to 130â kPa in temperatures ranging from 30 to 1473â K. This system enables one to perform automatic and high-throughput in situ X-ray powder diffraction experiments even at extremely low pressures. Furthermore, this developed system is useful for studying crystal structures during the adsorption/desorption processes, as acquired by millisecond and continuous powder diffraction measurements. The acquisition of diffraction data can be synchronized with the control of the pressure with a high frame rate of up to 100â Hz. In situ and time-resolved powder diffraction measurements are demonstrated for nanoporous Cu coordination polymer in various gas and vapour atmospheres.
RESUMO
The insertion of "sandwiched spins" between magnetic layers could efficiently affect the interlayer magnetic correlations, but doing so increases the complexity in the interlayer spin alignment because of competition between the inserted spin-layer interaction JNNI and the interlayer through-space interaction JNNNI if the magnitude of JNNI is of the same order as JNNNI with reciprocal signs of the respective interactions. Herein, systematic tuning of the magnetic phase variations by JNNI and JNNNI in two kinds of metal-variable isostructural series of supramolecular pillared layer magnets [MCp*2 ][{Ru2 II,II (2,3,5,6-F4 CO2 )4 }2 (TCNQ)]â 2 DCE (M=Co, Fe, Cr; 2,3,5,6-F4 PhCO2 - =2,3,5,6-tetrafluorobenzoate; TCNQ=7,7,8,8-tetracyano-p-quinodimethane; DCE=1,2-dichloroethane) and their DCE-free series, in which [MCp*2 ]+ (Cp*=η5 -C5 Me5 ) species with S=0, 1/2, and 3/2 for M=Co, Fe, Cr, respectively, are sandwiched between ferrimagnetic layers of [{Ru2 }2 (TCNQ)]- , is demonstrated. The results showed that the flexible magnetic natures of these magnets are changeable in dependence on JNNI and JNNNI , as well as on interlayer inserted spins M.
RESUMO
Derivatives of 1,2-dithienylethene (DTE) have superb photochromic properties due to an efficient reversible photocyclization reaction of their hexatriene structure and, thus, have application potential in materials for optoelectronics and (multi-responsive) molecular switches. Transition-metal complexes bearing switchable DTE motifs commonly incorporate their coordination site rather distant from the hexatriene system. In this work the redox active ligand 1,2-bis(2,5-dimethylthiophen-3-yl)ethane-1,2-dione is described, which reacts with [V(TMEDA)2 Cl2 ] to give a rare non-oxido vanadium(IV) species 3(M,M/P,P). This blue complex has two bidentate en-diolato ligands which chelate the VIV center and give rise to two five-membered metallacycles with the adjacent hexatriene DTE backbone bearing axial chirality. Upon irradiation with UVA light or prolonged heating in solution, the blue compound 3(M,M/P,P) converts into the purple atropisomer 4(para,M/para,P). Both complexes were isolated and structurally characterized by single-crystal X-ray diffraction analysis (using lab source and synchrotron radiation). The antiparallel configuration (M or P helicity) present in both 3(M,M/P,P) and 4(para,M/para,P) is a prerequisite for (reversible) 6π cyclization reactions. A CW EPR spectroscopic study reveals the metalloradical character for 3(M,M/P,P) and 4(para,M/para,P) and indicates dynamic reversible cyclization of the DTE backbone in complex 3(M,M/P,P) at ambient temperature in solution.
RESUMO
CO2 -responsive spin-state conversion between high-spin (HS) and low-spin (LS) states at room temperature was achieved in a monomeric cobalt(II) complex. A neutral cobalt(II) complex, [CoII (COO-terpy)2 ]â 4 H2 O (1â 4 H2 O), stably formed cavities generated via π-π stacking motifs and hydrogen bond networks, resulting in the accommodation of four water molecules. Crystalline 1â 4 H2 O transformed to solvent-free 1 without loss of porosity by heating to 420â K. Compound 1 exhibited a selective CO2 adsorption via a gate-open type of the structural modification. Furthermore, the HS/LS transition temperature (T1/2 ) was able to be tuned by the CO2 pressure over a wide temperature range. Unlike 1 exhibits the HS state at 290â K, the CO2 -accomodated form 1âCO2 (P CO 2 =110â kPa) was stabilized in the LS state at 290â K, probably caused by a chemical pressure effect by CO2 accommodation, which provides reversible spin-state conversion by introducing/evacuating CO2 gas into/from 1.