Multifunctional ytterbium oxide buffer for perovskite solar cells.

Perovskite solar cells (PSCs) comprise a solid perovskite absorber sandwiched between several layers of different charge-selective materials, ensuring unidirectional current flow and high voltage output of the devices1,2. A 'buffer material' between the electron-selective layer and the metal electrode in p-type/intrinsic/n-type (p-i-n) PSCs (also known as inverted PSCs) enables electrons to flow from the electron-selective layer to the electrode3-5. Furthermore, it acts as a barrier inhibiting the inter-diffusion of harmful species into or degradation products out of the perovskite absorber6-8. Thus far, evaporable organic molecules9,10 and atomic-layer-deposited metal oxides11,12 have been successful, but each has specific imperfections. Here we report a chemically stable and multifunctional buffer material, ytterbium oxide (YbOx), for p-i-n PSCs by scalable thermal evaporation deposition. We used this YbOx buffer in the p-i-n PSCs with a narrow-bandgap perovskite absorber, yielding a certified power conversion efficiency of more than 25%. We also demonstrate the broad applicability of YbOx in enabling highly efficient PSCs from various types of perovskite absorber layer, delivering state-of-the-art efficiencies of 20.1% for the wide-bandgap perovskite absorber and 22.1% for the mid-bandgap perovskite absorber, respectively. Moreover, when subjected to ISOS-L-3 accelerated ageing, encapsulated devices with YbOx exhibit markedly enhanced device stability.

Strain and Shell Thickness Engineering in Pd3 Pb@Pt Bifunctional Electrocatalyst for Ethanol Upgrading Coupled with Hydrogen Production.

The ethanol oxidation reaction (EOR) is an attractive alternative to the sluggish oxygen evolution reaction in electrochemical hydrogen evolution cells. However, the development of high-performance bifunctional electrocatalysts for both EOR and hydrogen evolution reaction (HER) is a major challenge. Herein, the synthesis of Pd3 Pb@Pt core-shell nanocubes with controlled shell thickness by Pt-seeded epitaxial growth on intermetallic Pd3 Pb cores is reported. The lattice mismatch between the Pd3 Pb core and the Pt shell leads to the expansion of the Pt lattice. The synergistic effects between the tensile strain and the core-shell structures result in excellent electrocatalytic performance of Pd3 Pb@Pt catalysts for both EOR and HER. In particular, Pd3 Pb@Pt with three Pt atomic layers shows a mass activity of 8.60 A mg-1 Pd+Pt for ethanol upgrading to acetic acid and close to 100% of Faradic efficiency for HER. An EOR/HER electrolysis system is assembled using Pd3 Pb@Pt for both the anode and cathode, and it is shown that low cell voltage of 0.75 V is required to reach a current density of 10 mA cm-2 . The present work offers a promising strategy for the development of bifunctional catalysts for hybrid electrocatalytic reactions and beyond.

Doping Ability Modulated by Interlayer Coupling in AA' and AB Stacked Bilayer V-WS2 Grown with Chemical Vapor Deposition.

Doping in transition metal dichalcogenide (TMD) has received extensive attention for its prospect in the application of photoelectric devices. Currently researchers focus on the doping ability and doping distribution in monolayer TMD and have obtained a series of achievements. Bilayer TMD has more excellent properties compared with monolayer TMD. Moreover, bilayer TMD with different stacking structures presents varying performance due to the difference in interlayer coupling. Herein, this work focuses on doping ability of dopants in different bilayer stacking structures that has not been studied yet. Results of this work show that the doping ability of V atoms in bilayer AA' and AB stacked WS2 is different, and the doping concentration of V atoms in AB stacked WS2 is higher than in AA' stacked WS2. Moreover, dopants from top and bottom layer can be distinguished by scanning transmission electron microscopy (STEM) image. Density functional theory (DFT) calculation further confirms the doping rule. This study reveals the mechanism of the different doping ability caused by stacking structures in bilayer TMD and lays a foundation for further preparation of controllable-doping bilayer TMD materials.

Concentration Phase Separation of Substitution-Doped Atoms in TMDCs Monolayer.

The density and spatial distribution of substituted dopants affect the transition metal dichalcogenides (TMDCs) materials properties. Previous studies have demonstrated that the density of dopants in TMDCs increases with the amount of doping, and the phenomenon of doping concentration difference between the nucleation center and the edge is observed, but the spatial distribution law of doping atoms has not been carefully studied. Here, it is demonstrated that the spatial distribution of dopants changes at high doping concentrations. The spontaneous formation of an interface with a steep doping concentration change is named concentration phase separation (CPS). The difference in the spatial distribution of dopants on both sides of the interface can be identified by an optical microscope. This is consistent with the results of spectral analysis and microstructure characterization of scanning transmission electron microscope. According to the calculation results of density functional theory, the chemical potential has two relatively stable energies as the doping concentration increases, which leads to the spontaneous formation of CPS. Understanding the abnormal phenomena is important for the design of TMDCs devices. This work has great significance in the establishment and improvement of the doping theory and the design of the doping process for 2D materials.

Single-Crystal MoS2 Monolayer Wafer Grown on Au (111) Film Substrates.

Monolayer transition metal dichalcogenides (TMDCs) with high crystalline quality are important channel materials for next-generation electronics. Researches on TMDCs have been accelerated by the development of chemical vapor deposition (CVD). However, antiparallel domains and twin grain boundaries (GBs) usually form in CVD synthesis due to the special threefold symmetry of TMDCs lattices. The existence of GBs severely reduces the electrical and photoelectrical properties of TMDCs, thus restricting their practical applications. Herein, the epitaxial growth of single crystal MoS2 (SC-MoS2 ) monolayer is reported on Au (111) film across a two-inch c-plane sapphire wafer by CVD. The MoS2 domains obtained on Au (111) film exhibit unidirectional alignment with zigzag edges parallel to the <110> direction of Au (111). Experimental results indicated that the unidirectional growth of MoS2 domains on Au (111) is a temperature-guided epitaxial growth mode. The high growth temperature provides enough energy for the rotation of the MoS2 seeds to find the most favorable orientation on Au (111) to achieve a unidirectional ratio of over 99%. Moreover, the unidirectional MoS2 domains seamlessly stitched into single crystal monolayer without GBs formation. The progress achieved in this work will promote the practical applications of TMDCs in microelectronics.

Effects of carbon-based impurities on graphene growth.

In this paper, we studied the growth of graphene on an untreated Cu substrate and further studied the effect of carbon-based impurities on the nucleation of graphene in different growth environments. It is found that the impurities on the surface of the Cu substrate easily lead to damage of the graphene, and the impurities do not always promote nucleation as previously reported, but inhibit nucleation in a high etching environment. Finally, based on experimental results, a model of nucleation and growth of graphene around impurities is presented.

Realizing controllable graphene nucleation by regulating the competition of hydrogen and oxygen during chemical vapor deposition heating.

Oxygen can passivate Cu surface active sites when graphene nucleates. Thus, the nucleation density is decreased. The CuO/Cu substrate was chosen for graphene domain synthesis in our study. The results indicate that the CuO/Cu substrate is beneficial for large-scale, single-crystal graphene domain synthesis. Graphene grown on the CuO/Cu substrate exhibits fewer nucleation sites than on Cu foils, suggesting that graphene follows an oxygen-dominating growth. Hydrogen treatment via a heating process could weaken the surface oxygen's role in limiting graphene nucleation under the competition of hydrogen and oxygen and could transfer the synthesis of graphene into a hydrogen-dominating growth. However, the competition only exists during the chemical vapor deposition heating process. For non-hydrogen heated samples, oxygen-dominating growth is experienced even though the samples are annealed in hydrogen for a long time after the heating process. With the temperature increases, the role of hydrogen gradually decreases. The balance of hydrogen and oxygen is adjusted by introducing hydrogen gas at a different heating temperatures. The oxygen concentration on the substrate surface is believed to determine the reactions mechanisms based on the secondary ion mass spectrometry test results. This study provides a new method for the controllable synthesis of graphene nucleation during a heating process.

Alteration of integrin-associated protein (CD47) on experimental porcine eperythrozoonosis.

To evaluate the alteration of CD47 on RBCs of pigs infected with M. suis, we induced the experimental porcine eperythrozoonosis and collected the blood samples at the different time points. The result of analysis by flow cytometry after reaction with mouse-anti-human CD47 and caprine-anti-mouse IgG-FITC reagents indicated that the CD47 quantity on RBCs changed correlatively with the course of PE. The lowest value of M1 (percentage of the positive cells in fluorescence intensity) occurred on day 7 post inoculation at the peak of parasitemia and decreased 82% compared with the control sample. And then, the values of M1 on day 14 and 21 rised slowly but were still significantly different with the controls (p < 0.01). These suggested that the quantity of CD47 on RBCs altered progressively with the phases of the PE disease. The decrease of CD47 on RBCs maybe weaken the inhibitory CD47-SIRPalpha interaction and provide positive signals for phagocytosis of macrophages resulting in the removal of the RBCs from the circulation. In conclusion, CD47, a marker on RBCs, maybe play an important role on the mechanism of hemolysis caused by infection of M. suis.

Growth promotion of vertical graphene on SiO2/Si by Ar plasma process in plasma-enhanced chemical vapor deposition.

This study investigates the growth promotion of vertically oriented graphene in plasma-enhanced chemical vapor deposition through Ar plasma treatment. Combined with various substrate treatments, including hydrofluoric acid etching and oxidation after Ar plasma treatment, Ar plasma pretreatment promotes vertical growth through the microcavity on the rough substrate surface and the active growth sites. The microcavity affects the strain distribution and defects of as-deposited planar films, which benefit the transition of 2D deposition to 3D vertical growth. A growth model on the effect of Ar plasma pretreatment is proposed.

Edge morphology evolution of graphene domains during chemical vapor deposition cooling revealed through hydrogen etching.

During cooling, considerable changes such as wrinkle formation and edge passivation occur in graphene synthesized on the Cu substrate. Wrinkle formation is caused by the difference in the thermal expansion coefficients of graphene and its substrate. This work emphasizes the cooling-induced edge passivation. The graphene-edge passivation can limit the regrowth of graphene at the domain edge. Our work shows that silicon-containing particles tend to accumulate at the graphene edge, and the formation of these particles is related to cooling. Furthermore, a clear curvature can be observed at the graphene edge on the Cu substrate, indicating the sinking of the graphene edge into the Cu substrate. Both the sinking of the graphene edge and the accumulation of silicon-containing particles are responsible for edge passivation. In addition, two kinds of graphene edge morphologies are observed after etching, which were explained by different etching mechanisms that illustrate the changes of the graphene edge during cooling.

[Serum levels of macrophage colony stimulating factor in the patients with Alzheimer's disease].

OBJECTIVE: To investigate the availability of serum level of macrophage clony stimulating factor (M-CSF) as a marker for early diagnosis of Alzheimer's disease (AD). METHODS: The serum levels of M-CSF in 70 patients with AD, 52 healthy controls, 22 patients with VAD (vascular dementia) were measured and the serum levels of IL-1 beta, IL-6, TNF-alpha in 32 patients with AD and 20 controls were measured as well. RESULTS: Serum levels of M-CSF were significantly elevated in patients with AD when compared with healthy controls (P < 0.01) and VAD controls (P < 0.05) respectively. At the early stage of mild dementia and middle dementia, serum levels of M-CSF were significantly elevated, but at the later stage of severe dementia, they returned to normal level. Serum levels of IL-1 beta were significantly elevated in AD patients compared with controls (P < 0.05), and serum levels of TNF-alpha and IL-6 were within the normal range in patients with AD. CONCLUSIONS: The results suggest that serum M-CSF level may provide a convenient and sensitive means for the early diagnosis of Alzheimer's disease.

Generation and evaluation of the trivalent inactivated reassortant vaccine using human, avian, and swine influenza A viruses.

Reassortant technology was used to obtain three interspecific reassortant influenza viruses using three influenza viruses of A/Puerto Rico/8/34(H1N1), A/swine/Hebei/1/2005(H3N2) and A/chicken/Guangdong/126/2002(H9N2). The high-growth reassortant strains were H9/PR8, H3/H9N2 and H1/H9N2 that contained hemagglutinin (HA) and neuraminidase (NA) genes from the inactivated parental viruses and the other 6 internal genes from the live parental viruses. The trivalent formalin-inactivated vaccine, containing H1, H3 and H9 subtype antigens from human, swine and avian influenza viruses respectively, was prepared using these reassortant viruses. Animal studies showed that the vaccine was safe and immunogenic. Two-dosing regimen of the influenza vaccine induced high titers of hemagglutination inhibiting (HI) antibodies and influenza-specific IgG antibodies without antigenic cross-interference. It protected 100% chickens from challenge of A/chicken/Guangdong/126/2002 virus and protected 100% mice against challenges with different combinations of the three infective parental viruses. These results indicated that the trivalent vaccine could offer multi-protection against multi-influenza viruses synchronously. This kind of multivalent inactivated reassortant influenza vaccine maybe enlightens the pandemic influenza preparedness as the emergency measure.