Nitrogen reduction by the Fe sites of synthetic [Mo3S4Fe] cubes.

Nitrogen (N2) fixation by nature, which is a crucial process for the supply of bio-available forms of nitrogen, is performed by nitrogenase. This enzyme uses a unique transition-metal-sulfur-carbon cluster as its active-site co-factor ([(R-homocitrate)MoFe7S9C], FeMoco)1,2, and the sulfur-surrounded iron (Fe) atoms have been postulated to capture and reduce N2 (refs. 3-6). Although there are a few examples of synthetic counterparts of the FeMoco, metal-sulfur cluster, which have shown binding of N2 (refs. 7-9), the reduction of N2 by any synthetic metal-sulfur cluster or by the extracted form of FeMoco10 has remained elusive, despite nearly 50 years of research. Here we show that the Fe atoms in our synthetic [Mo3S4Fe] cubes11,12 can capture a N2 molecule and catalyse N2 silylation to form N(SiMe3)3 under treatment with excess sodium and trimethylsilyl chloride. These results exemplify the catalytic silylation of N2 by a synthetic metal-sulfur cluster and demonstrate the N2-reduction capability of Fe atoms in a sulfur-rich environment, which is reminiscent of the ability of FeMoco to bind and activate N2.

Vanadium Alumanyl Complex: Synthesis, Characterization, Reactivity, and Application as a Catalyst for C-H Alumanylation of Alkenes.

A complex containing a V-Al bond is described. This species can be prepared by either transmetalation of a previously disclosed alumanylpotassium with Cp2VCl or photolytic oxidative alumination of Cp2V using the corresponding dialumane. Reaction of the resulting V-Al complex with H2 gave a Cp2V-dihydridoaluminate complex. These complexes were studied with X-ray crystallography, vanadium K-edge XANES spectroscopy, and DFT calculations. Finally, the reactivity of these molecules was studied opening the way to a catalytic C-H alumanylation of alkenes.

Three-Dimensional Visualization of Adsorption Distribution in a Single Crystalline Particle of a Metal-Organic Framework.

Many unique adsorption properties of metal-organic frameworks (MOFs) have been revealed by diffraction crystallography, visualizing their vacant and guest-loaded crystal structures at the molecular scale. However, it has been challenging to see the spatial distribution of the adsorption behaviors throughout a single MOF particle in a transient equilibrium state. Here, we report three-dimensional (3D) visualization of molecular adsorption behaviors in a single crystalline particle of a MOF by in situ X-ray absorption fine structure spectroscopy combined with computed tomography for the first time. The 3D maps of water-coordinated Co sites in a 100 µm-scale MOF-74-Co crystal were obtained with 1 µm spatial resolution under several water vapor pressures. Through the visualization of the water vapor adsorption process, 3D spectroimaging revealed the mechanism and spatial heterogeneity of guest adsorption inside a single particle of a crystalline MOF.

Mechanochemical Synthesis of Non-Solvated Dialkylalumanyl Anion and XPS Characterization of Al(I) and Al(II) Species.

A non-solvated alkyl-substituted Al(I) anion dimer was synthesized by a reduction of haloalumane precursor using a mechanochemical method. The crystallographic and theoretical analysis revealed its structure and electronic properties. Experimental XPS analysis of the Al(I) anions with reference compounds revealed the lower Al 2p binding energy corresponds to the lower oxidation state of Al species. It should be emphasized that the experimentally obtained XPS binding energies were reproduced by delta SCF calculations and were linearly correlated with NPA charges and 2p orbital energies.

Low-temperature redox activity and alcohol ammoxidation performance on Cu- and Ru-incorporated ceria catalysts.

Transition-metal-incorporated cerium oxides with Cu and a small amount of Ru (Cu0.18Ru0.05CeOz) were prepared, and their low-temperature redox performance (<423 K) and catalytic alcohol ammoxidation performance were investigated. Temperature-programmed reduction/oxidation under H2/O2 and in situ X-ray absorption fine structure revealed the reversible redox behavior of the three metals, Cu, Ru, and Ce, in the low-temperature redox processes. The initially reduced Ru species decreased the reduction temperature of Cu oxides and promoted the activation of Ce species. Cu0.18Ru0.05CeOz selectively catalyzed the production of benzonitrile in the ammoxidation of benzyl alcohol. H2-treated Cu0.18Ru0.05CeOz showed a slightly larger initial conversion of benzyl alcohol than O2-treated Cu0.18Ru0.05CeOz, suggesting that the reduced structure of Cu0.18Ru0.05CeOz was active for the ammoxidation. The integration of both Cu and Ru resulted in the efficient promotion of ammoxidation, in which the Ru species were involved in the conversion of benzyl alcohol and Cu species were required for selective production of benzonitrile.

In situ 3D X-ray imaging of water distribution in each layer of a membrane electrode assembly of a polymer electrolyte fuel cell.

In situ 3D computed tomography imaging with statistical analysis successfully revealed the water accumulation and drainage characteristics in the stacked gas diffusion layers (GDLs) and membrane electrode assembly (MEA) of a polymer electrolyte fuel cell. Efficient water drainage at the interface between the cathode GDL and MEA was confirmed upon supplying oxygen to the cathode.

Coordination-Induced Trigger for Activity: N-Heterocyclic Carbene-Decorated Ceria Catalysts Incorporating Cr and Rh with Activity Induction by Surface Adsorption Site Control.

A coordination-induced trigger for catalytic activity is proposed on an N-heterocyclic carbene (NHC)-decorated ceria catalyst incorporating Cr and Rh (ICy-r-Cr0.19Rh0.06CeOz). ICy-r-Cr0.19Rh0.06CeOz was prepared by grafting 1,3-dicyclohexylimidazol-2-ylidene (ICy) onto H2-reduced Cr0.19Rh0.06CeOz (r-Cr0.19Rh0.06CeOz) surfaces, which went on to exhibit substantial catalytic activity for the 1,4-arylation of cyclohexenone with phenylboronic acid, whereas r-Cr0.19Rh0.06CeOz without ICy was inactive. FT-IR, Rh K-edge XAFS, XPS, and photoluminescence spectroscopy showed that the ICy carbene-coordinated Rh nanoclusters were the key active species. The coordination-induced trigger for catalytic activity on the ICy-bearing Rh nanoclusters could not be attributed to electronic donation from ICy to the Rh nanoclusters. DFT calculations suggested that ICy controlled the adsorption sites of the phenyl group on the Rh nanocluster to promote the C-C bond formation of the phenyl group and cyclohexenone.

Oxidation and phase transfer of individual Cr-doped dendritic FeOx particles visualized by full-field nano-XAFS spectroimaging.

Iron oxides with various compositions and polymorphs have been widely used as compounds that require reversible redox properties, such as catalysts. However, partial decomposition during phase transitions often causes irreversible degradation of the redox properties of iron oxides. Cr doping into the crystalline framework of iron oxide dendrites improves the stability of the structural transformation of iron oxides. We spatially visualized the FeOx-dendrite phase distribution during oxidation in crystalline dendritic FeOx and Cr-FeOx particles by full-field nano-X-ray absorption fine structure spectroimaging. The spectroimaging visualized propagation in the phase transitions in the individual FeOx particles and changes in the phase transition behaviors of the Cr-FeOx particles. The statistical analysis of the spectroimaging data revealed the phase transition trends in parts of the FeOx and Cr-FeOx particles in three Fe density zones (particle thicknesses) and the probability densities of the phase proportions in the dendrites.

Sulfur poisoning of Pt and PtCo anode and cathode catalysts in polymer electrolyte fuel cells studied by operando near ambient pressure hard X-ray photoelectron spectroscopy.

We have investigated the S adsorption behaviours on Pt (average particle diameter of ∼2.6 nm) and Pt3Co (∼3.0 nm) anode and cathode electrode catalysts in polymer electrolyte fuel cells (PEFCs) under working conditions for the fresh state just after the aging process and also the degraded state after accelerated degradation tests (ADT), by studying near ambient pressure hard X-ray photoelectron spectroscopy (HAXPES). S 1s HAXPES of both the anode and cathode electrodes shows not only the principal S species from the sulfonic acid group (-SO3H) in the Nafion electrolyte but also other characteristic S species such as zero-valent S (S0) adsorbed on the carbon support and anionic S (S2-) adsorbed on the Pt electrode. The S2- species on Pt should be ascribed to S contamination poisoning the Pt catalyst electrode. The S2- species on the cathode can be oxidatively removed by applying a high cathode-anode bias voltage (≥0.8 V) to form SO32-, while at the anode the S2- species cannot be eliminated because of reductive environment in hydrogen gas. The important finding is the difference in S adsorption behaviours between the Pt/C and Pt3Co/C electrodes after ADT. After ADT, the Pt/C anode electrode exhibits much larger S2- adsorption than the Pt3Co/C anode electrode. This indicates that the Pt3Co/C anode is more desirable than the Pt/C one from the viewpoint of S poisoning. The reason for more tolerance of the Pt3Co/C anode catalyst against S poisoning after ADT can be ascribed to the more negative charge of the surface Pt atoms in the Pt3Co/C catalyst than those in the Pt/C one, thus yielding a weaker interaction between the surface Pt and the anionic S species as S2-, SO32-, and SO42-. A similar behaviour was observed also in the cathode catalyst. The present findings will nevertheless provide important information to design novel Pt-based PEFC electrodes with higher performance and longer durability.

Synthesis of Dinuclear Mo-Fe Hydride Complexes and Catalytic Silylation of N2.

Two transition-metal atoms bridged by hydrides may represent a useful structural motif for N2 activation by molecular complexes and the enzyme active site. In this study, dinuclear MoIV -FeII complexes with bridging hydrides, CpR Mo(PMe3 )(H)(µ-H)3 FeCp* (2 a; CpR =Cp*=C5 Me5 , 2 b; CpR =C5 Me4 H), were synthesized via deprotonation of CpR Mo(PMe3 )H5 (1 a; CpR =Cp*, 1 b; CpR =C5 Me4 H) by Cp*FeN(SiMe3 )2 , and they were characterized by spectroscopy and crystallography. These Mo-Fe complexes reveal the shortest Mo-Fe distances ever reported (2.4005(3) Šfor 2 a and 2.3952(3) Šfor 2 b), and the Mo-Fe interactions were analyzed by computational studies. Removal of the terminal Mo-H hydride in 2 a-2 b by [Ph3 C]+ in THF led to the formation of cationic THF adducts [CpR Mo(PMe3 )(THF)(µ-H)3 FeCp*]+ (3 a; CpR =Cp*, 3 b; CpR =C5 Me4 H). Further reaction of 3 a with LiPPh2 gave rise to a phosphido-bridged complex Cp*Mo(PMe3 )(µ-H)(µ-PPh2 )FeCp* (4). A series of Mo-Fe complexes were subjected to catalytic silylation of N2 in the presence of Na and Me3 SiCl, furnishing up to 129±20 equiv of N(SiMe3 )3 per molecule of 2 b. Mechanism of the catalytic cycle was analyzed by DFT calculations.

Feed gas exchange (startup/shutdown) effects on Pt/C cathode electrocatalysis and surface Pt-oxide behavior in polymer electrolyte fuel cells as revealed using in situ real-time XAFS and high-resolution STEM measurements.

The synchronizing measurements of both cyclic voltammograms (CVs) and real-time quick XAFSs (QXAFSs) for Pt/C cathode electrocatalysts in a membrane electrode assembly (MEA) of polymer electrolyte fuel cells (PEFCs) treated by anode-gas exchange (AGEX) and cathode-gas exchange (CGEX) cycles (startup/shutdown conditions of FC vehicles) were performed for the first time to understand the opposite effects of the AGEX and CGEX treatments on the Pt/C performance and durability and also the contradiction between the electrochemical active surface area (ECSA) decrease and the performance increase by CGEX treatment. While the AGEX treatment decreased both the ECSA and performance of MEA Pt/C due to carbon corrosion, it was found that the CGEX treatment decreased the ECSA but increased the Pt/C performance significantly due to high-index (331) facet formation (high-resolution STEM) and hence the suppression of strongly bound Pt-oxide formation at cathode Pt nanoparticle surfaces. Transient QXAFS time-profile analysis for the MEA Pt/C also revealed a direct relationship between the electrochemical performance or durability and transient kinetics of the Pt/C cathode.

Visualization and understanding of the degradation behaviors of a PEFC Pt/C cathode electrocatalyst using a multi-analysis system combining time-resolved quick XAFS, three-dimensional XAFS-CT, and same-view nano-XAFS/STEM-EDS techniques.

We developed a multi-analysis system that can measure in situ time-resolved quick XAFS (QXAFS) and in situ three-dimensional XAFS-CT spatial imaging in the same area of a cathode electrocatalyst layer in a membrane-electrode assembly (MEA) of a polymer electrolyte fuel cell (PEFC) at the BL36XU beamline of SPring-8. The multi-analysis system also achieves ex situ two-dimensional nano-XAFS/STEM-EDS same-view measurements of a sliced MEA fabricated from a given place in the XAFS-CT imaged area at high spatial resolutions under a water-vapor saturated N2 atmosphere using a same-view SiN membrane cell. In this study, we applied the combination method of time-resolved QXAFS/3D XAFS-CT/2D nano-XAFS/STEM-EDS for the first time for the visualization analysis of the anode-gas exchange (AGEX) (simulation of the start-up/shut-down of PEFC vehicles) degradation process of a PEFC MEA Pt/C cathode. The AGEX cycles bring about serious irreversible degradation of both Pt nanoparticles and carbon support due to a spike-like large voltage increase. We could visualize the three-dimensional distribution and two-dimensional depth map of the amount, oxidation state (valence), Pt2+ elution, detachment, and aggregation of Pt species and the formation of carbon voids, where the change and movement of the Pt species in the cathode catalyst layer during the AGEX cycles did not proceed exceeding the 1 µm region. It is very different from the case of an ADT (an accelerated durability test between 0.6-1.0 VRHE)-degraded MEA. We discuss the spatiotemporal behavior of the AGEX degradation process and the degradation mechanism.

Reversible structural transformation and redox properties of Cr-loaded iron oxide dendrites studied by in situ XANES spectroscopy.

Cr-Loaded iron oxide with a dendritic crystalline structure was synthesized and the reversible crystalline phase transition during redox cycling of the iron oxide was investigated. X-ray diffraction and transmission electron microscopy analyses revealed that Cr was well dispersed and loaded in the iron oxide dendrite crystals, whose lattice constant was dependent on the Cr loading. Temperature-programmed oxidation and reduction experiments revealed the reversible redox properties of the Cr-loaded iron oxide dendrites, whose redox temperature was found to be lower than that of Cr-free iron oxide dendrites. In situ Fe K-edge and Cr K-edge X-ray absorption near-edge structure (XANES) analysis indicated that Cr loading extended the redox reaction window for conversion between Fe3O4 and γ-Fe2O3 owing to compressive lattice strain in the iron oxide spinel structures.

Ambient Pressure Hard X-ray Photoelectron Spectroscopy for Functional Material Systems as Fuel Cells under Working Conditions.

Heterogeneous interfaces play important roles in a variety of functional material systems and technologies, such as catalysis, batteries, and devices. A fundamental understanding of efficient functions at interfaces under realistic conditions is crucial for sophisticated designs of useful material systems and novel devices. X-ray photoelectron spectroscopy is one of the most promising and common methods to investigate such material systems. Although X-ray photoelectron spectroscopy is usually conducted under high vacuum because of the requirement of electron detection with the precise measurement of kinetic energies, extensive efforts have been devoted to the measurements in gaseous environments. Very recently, we have succeeded in measuring X-ray photoelectron spectra under real ambient atmosphere (105 Pa), using synchrotron radiation hard X-rays with the photon energy of 8 keV and the windowless electron spectrometer system. In this Account, the novel useful technique of real ambient pressure hard X-ray photoelectron spectroscopy is reviewed. As examples of (near) ambient pressure hard X-ray photoelectron spectroscopy, hydrogen storage of Pd nanoparticles is at first investigated by recording Pd 3d and valence band spectra under hydrogen atmosphere. The Pd 3d and valence band spectra are found to change rather abruptly depending on the hydrogen pressure, demonstrating a behavior like phase transformation. Subsequently, as a main topic in this Account, we describe investigations of the electronic states of platinum nanoparticles on the cathode electrocatalyst in a polymer electrolyte fuel cell (PEFC) under the voltage operating conditions using the near ambient pressure hard X-ray photoelectron spectroscopic system. The Pt 4f and 3d X-ray photoelectron spectra of the cathode Pt/C catalysts clearly show that the oxidized Pt species is at most divalent and the tetravalent Pt species does not exist on the Pt nanoparticles even at the positive cathode-anode voltage of ∼1.4 V. Although the water oxidation reaction may take place at the potential, such a reaction does not lead to a buildup of detectable tetravalent Pt in the PEFC. The voltage-dependent Pt 3d X-ray photoelectron spectra show a clear hysteresis between the voltage increase and decrease processes. The fraction of oxidized Pt species matched the ratio of surface to total Pt atoms in the nanoparticles, which suggests that Pt oxidation occurs as a reaction event at only the first Pt layer of the Pt nanoparticles and the inner Pt atoms do not participate in the reaction practically. The developed technique is a valuable in situ tool for the investigation of the electronic states of PEFCs and other interesting functional material systems and devices under realistic working conditions.

SPring-8 BL36XU: Synchrotron Radiation X-Ray-Based Multi-Analytical Beamline for Polymer Electrolyte Fuel Cells under Operating Conditions.

We designed and constructed a beamline BL36XU at the 8 GeV synchrotron radiation facility SPring-8 to provide information required for the development of next-generation polymer electrolyte fuel cells (PEFCs) by clarifying the dynamic aspects of structures and electronic states of cathode catalysts under PEFC operating conditions and in the deterioration processes by accelerated durability test protcols. To investigate the mechanism and degradation process for the cathode electrocatalysis in practical PEFCs, we developed advanced time- and spatially-resolved in-situ/operando X-ray absorption fine structure measurement systems and complementary analytical systems (X-ray emission spectroscopy (XES), X-ray diffraction (XRD), X-ray computer tomography (CT) and hard X-ray photoelectron spectroscopy (HAXPES)) and combined them to develop multi-analytical systems at BL36XU. Multi-analytical systems are very powerful for observing spatial-temporal features of the transient processes occurring in complex systems such as PEFCs. This account describes the design, performance, and research results of the BL36XU and multi-analytical in-situ/operando systems.

Operando XAFS Imaging of Distribution of Pt Cathode Catalysts in PEFC MEA.

Three-dimensional imaging using X-ray as a probe is state-of-the-art for the characterization of heterogeneous materials. In addition to simple imaging of sample morphology, imaging of elemental distribution and chemical states provides advanced maps of key structural parameters of functional materials. The combination of X-ray absorption fine structure (XAFS) spectroscopy and three-dimensional imaging such as computed tomography (CT) can visualize the three-dimensional distribution of target elements, their valence states, and local structures in a non-destructive manner. In this personal account, our recent results on the three-dimensional XAFS imaging for Pt cathode catalysts in the membrane electrode assembly (MEA) of polymer electrolyte fuel cell (PEFC) are introduced. The distribution and chemical states of Pt cathode catalysts in MEAs remarkably change under PEFC operating conditions, and the 3D XAFS imaging revealed essential events in PEFC MEAs.

Synthesis of [Mo3S4] Clusters from Half-Sandwich Molybdenum(V) Chlorides and Their Application as Platforms for [Mo3S4Fe] Cubes.

Triangular [Mo3S4] clusters are known to serve as platforms to accommodate a metal atom M, furnishing cubic [Mo3S4M] clusters. In this study, three [Mo3S4] clusters supported by η5-cyclopentadienyl (CpR) ligands, [CpR3Mo3S4]+ (CpR = C5Me4SiMe3, C5Me4SiEt3, and C5Me4H), were synthesized via half-sandwich molybdenum chlorides CpRMoCl4. In the cyclic voltammogram of the [Mo3S4] cluster having C5Me4H ligands, a weak feature appeared in addition to the [CpR3Mo3S4]0/- redox process, indicating the interaction between [CpR3Mo3S4]- and the [NnBu4] cation of the electrolyte, while such a feature was less significant for the C5Me4SiR3 variants. The [Mo3S4] clusters with bulky C5Me4SiR3 ligands were successfully applied as platforms to accommodate an Fe atom to furnish cubic [Mo3S4Fe] clusters. On the other hand, the corresponding reactions of the less bulky C5Me4H analogue gave complex mixtures.

Reversible low-temperature redox activity and selective oxidation catalysis derived from the concerted activation of multiple metal species on Cr and Rh-incorporated ceria catalysts.

The ceria-based catalyst incorporated with Cr and a trace amount of Rh (Cr0.19Rh0.06CeOz) was prepared and the reversible redox performances and oxidation catalysis of CO and alcohol derivatives with O2 at low temperatures (<373 K) were investigated. In situ X-ray absorption fine structure (XAFS), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), high angle annular dark-field scanning transmission electron microscopy (HAADF-STEM)-EDS/EELS and temperature-programmed reduction/oxidation (TPR/TPO) revealed the structures and redox mechanisms of three metals in Cr0.19Rh0.06CeOz: dispersed Rh3+δ species (<1 nm) and Cr6-γO3-x nanoparticles (∼1 nm) supported on CeO2 in Cr0.19Rh0.06CeOz were transformed to Rh nanoclusters, Cr(OH)3 species and CeO2-x with two Ce3+-oxide layers at the surface in a concerted activation manner of the three metal species with H2.

Synthesis of A Pincer-IrV Complex with A Base-Free Alumanyl Ligand and Its Application toward the Dehydrogenation of Alkanes.

A pincer-iridium complex bearing a Lewis-base-free X-type alumanyl ligand has been synthesized. X-ray diffraction, NMR and IR spectroscopy, as well as XANES analysis confirmed its tetrahydrido-IrV structure and Lewis acidity at the Al center as supported by DFT calculations. The resulting complex was applied as a catalyst for the transfer dehydrogenation of cyclooctane.

N-Heterocyclic Carbene-Modified Au-Pd Alloy Nanoparticles and Their Application as Biomimetic and Heterogeneous Catalysts.

The preparation of water-soluble, N-heterocyclic-carbene-stabilized Au-Pd alloy nanoparticles by a straightforward ligand exchange process is presented. Extensive analysis revealed excellent size retention and stability over years in water. The alloy nanoparticles were applied as biomimetic catalysts for aerobic oxidation of d-glucose, for which monometallic Au and Pd nanoparticles showed no or negligible activity. The alloy nanoparticles were further applied as titania-supported heterogeneous catalysts for the mild hydrogenation of nitroarenes and the semihydrogenation of 1,2-diphenylacetylene with a solvent-dependent selectivity switch between E- and Z-stilbene.