Carboxypeptidase M modulates BMSCs osteogenesis-adipogenesis via the MAPK/ERK pathway: An integrated single-cell and bulk transcriptomic study.

The pathogenesis of osteoporosis (OP) is closely associated with the disrupted balance between osteogenesis and adipogenesis in bone marrow-derived mesenchymal stem cells (BMSCs). We analyzed published single-cell RNA sequencing (scRNA-seq) data to dissect the transcriptomic profiles of bone marrow-derived cells in OP, reviewing 56 377 cells across eight scRNA-seq datasets from femoral heads (osteoporosis or osteopenia n = 5, osteoarthritis n = 3). Seventeen genes, including carboxypeptidase M (CPM), were identified as key osteogenesis-adipogenesis regulators through comprehensive gene set enrichment, differential expression, regulon activity, and pseudotime analyses. In vitro, CPM knockdown reduced osteogenesis and promoted adipogenesis in BMSCs, while adenovirus-mediated CPM overexpression had the reverse effects. In vivo, intraosseous injection of CPM-overexpressing BMSCs mitigated bone loss in ovariectomized mice. Integrated scRNA-seq and bulk RNA sequencing analyses provided insight into the MAPK/ERK pathway's role in the CPM-mediated regulation of BMSC osteogenesis and adipogenesis; specifically, CPM overexpression enhanced MAPK/ERK signaling and osteogenesis. In contrast, the ERK1/2 inhibitor binimetinib negated the effects of CPM overexpression. Overall, our findings identify CPM as a pivotal regulator of BMSC differentiation, which provides new clues for the mechanistic study of OP.

HWJMSC-EVs promote cartilage regeneration and repair via the ITGB1/TGF-ß/Smad2/3 axis mediated by microfractures.

The current first-line treatment for repairing cartilage defects in clinical practice is the creation of microfractures (MF) to stimulate the release of mesenchymal stem cells (MSCs); however, this method has many limitations. Recent studies have found that MSC-derived extracellular vesicles (MSC-EVs) play an important role in tissue regeneration. This study aimed to verify whether MSC-EVs promote cartilage damage repair mediated by MFs and to explore the repair mechanisms. In vitro experiments showed that human umbilical cord Wharton's jelly MSC-EVs (hWJMSC-EVs) promoted the vitality of chondrocytes and the proliferation and differentiation ability of bone marrow-derived MSCs. This was mainly because hWJMSC-EVs carry integrin beta-1 (ITGB1), and cartilage and bone marrow-derived MSCs overexpress ITGB1 after absorbing EVs, thereby activating the transforming growth factor-ß/Smad2/3 axis. In a rabbit knee joint model of osteochondral defect repair, the injection of different concentrations of hWJMSC-EVs into the joint cavity showed that a concentration of 50 µg/ml significantly improved the formation of transparent cartilage after MF surgery. Extraction of regenerated cartilage revealed that the changes in ITGB1, transforming growth factor-ß, and Smad2/3 were directly proportional to the repair of regenerated cartilage. In summary, this study showed that hWJMSC-EVs promoted cartilage repair after MF surgery.

NOx removal capacity and compressive strength of photocatalytic cementitious materials with various color properties.

The photocatalytic cementitious materials (PCM) are expected to alleviate air pollution due to the direct utilization of natural solar energy. However, the color properties of cementitious materials have significant effect on the photocatalytic performance of PCM. In the present study, the colorful PCM is prepared using various colorants. The effect of color properties of cementitious materials on the NOx removal capacity of PCM is researched, and the related mechanism is analyzed by optical analysis. Furthermore, the effect of colorants on the compressive strength of PCM is studied. Results showed that the NOx removal capacity of PCM is decreased by the presence of colorants. As the 5% of black, yellow, red, and blue colorants are used, the NOx removal capacity of PCM is reduced by 73%, 48%, 21%, and 19%, respectively. Both the nano-TiO2 and cement in the PCM can absorb UV light. Colorants could enhance the UV light absorption capacity of cement, leading to a decrease in the UV light absorption of nano-TiO2, which is harmful to the generation of electron-hole pairs. Moreover, the Fe-phase in colorants could improve the surface charge separation resistance of nano-TiO2, limiting the efficiently separated electron-hole pairs. Therefore, the photocatalytic performance of PCM is weakened by the presence of colorants. The compressive strength of PCM is decreased by using colorants, but the reduction ratio at 28 d is no more than 10%, with the content of colorants within 5%. This research can guide the color design of PCM in practical applications.

An Efficient Synthesis of Naphtho[2,3-b]furan-4,9-diones via Visible-Light-Mediated [3+2] Cycloaddition Reaction.

Naphtho[2,3-b]furan-4,9-dione is an important privileged structural motif which is present in natural products, drugs, and drug candidates. Herein, visible-light-mediated [3+2] cycloaddition reaction for the synthesis of naphtho[2,3-b]furan-4,9-diones and dihydronaphtho[2,3-b]furan-4,9-diones has been developed. Under environmentally friendly conditions, a variety of title compounds were delivered in good yields. This new protocol shows excellent regioselectivity and remarkable functional group tolerance. This approach provides a powerful, green, efficient, and facile means to expand the structural diversity of naphtho[2,3-b]furan-4,9-diones and dihydronaph-tho[2,3-b]furan-4,9-diones as promising scaffolds for novel drug discovery.

Visible-Light-Mediated Catalyst-Free [2+2] Cycloaddition Reaction for Dihydrocyclobuta[b]naphthalene-3,8-diones Synthesis under Mild Conditions.

A facile and efficient visible-light-mediated method for directly converting 1,4-naphthoquinones into dihydrocyclo-buta[b]naphthalene-3,8-diones (DHCBNDOs) under mild and clean conditions without using any photocatalysts is reported. This approach exhibited favorable compatibility with functional groups and afforded a series of DHCBNDOs with excellent regioselectivity and high yields. Moreover, detailed mechanism studies were carried out both experimentally and theoretically. The readily accessible, low-cost and ecofriendly nature of the developed strategy will endow it with attractive applications in organic and medicinal chemistry.

Crustal Density Structure of the Jiuzhaigou Ms7.0 Earthquake Area Revealed by the Barkam-Jiuzhaigou-Wuqi Gravity Profile.

The Barkam-Jiuzhaigou-Wuqi gravity profile extends across the Jiuzhaigou Ms7.0 earthquake (in 2017) zone and passes through several historical big earthquakes' zones. We have obtained Bouguer gravity anomalies along the profile composed of 365 gravity observation stations with Global Positioning System (GPS) coordinates, analyzed the observed data and inverted subsurface density structure. The results show that the Moho depth has a big lateral variation from southwest to northeast, which shallows from 57 km to 43 km with maximum variation up to 14 km within 800 km. The most acute depth change of the Moho is in the boundary region between the Bayan Har block and West Qinling-Qilian block. According to our analysis, it is related to the eastward movement of the Bayan Har block. There are three main pieces of evidence that support it: (1) Density is higher in the east of the Bayan Har block and smaller in the west, which is the same as seismic activity; (2) Two thin low-density layers exist in the upper and middle crust of the Bayan Har block, which may promote inter-layer slip and the Jiuzhaigou Ms7.0 earthquake occurred in the boundary area of the two low-density layers, where the crustal density and Moho surface fluctuate sharply; (3) the GPS velocity field in the southwestern part gravity profile is significantly larger than that of the northeastern part, which is consistent with the density structure. Our studies also suggest that the large undulation of the Moho prevents the movement of the Bayan Har block, and strain is prone to accumulate here. The dynamic background analysis of the crust in this area indicates that the Moho surface uplifts in the West Qinling-Qilian block, which decelerates the eastern migration of material on the Qinghai-Tibet Plateau, and leads to the weak tectonic activity of the north part of the Bayan Har block.

Augmented Microfracture Technique Versus Microfracture in Talar Cartilage Restoration: A Systematic Review and Meta-Analysis.

The aim of this meta-analysis was to compare the efficacy and safety between the microfracture (MFx) and augmented microfracture (MFx+) techniques for articular cartilage defects of the talus (OLTs). PubMed and EMBASE were searched from January 1950 to October 2020. Only randomized controlled trials, quasi-randomized controlled trials, and observational studies (retrospective and prospective) applying MFx and MFx+ techniques to treat talar cartilage defects were selected. Ten trials with 492 patients were included. There was significant difference in final American Orthopaedic Foot & Ankle Society score (AOFAS) (mean difference [MD] = 7.07; 95% confidence interval [CI], 3.70-10.44; p < .01), AOFAS change (MD = 7.97; 95% CI, 4.27-11.66; p < .01), visual analog scale (VAS) change score (MD = 0.44; 95% CI, 0.29-0.59; p < .01), Magnetic Resonance Observation of Cartilage Repair Tissue (MOCART) score (MD = 12.51; 95% CI, 7.16-17.86; p < .01), complication (RR = 0.33; 95% CI, 0.16-0.69; p < .01), and revision (Relative risk = 0.34; 95% CI, 0.15-0.77; p < .05), between the MFx and MFx+ groups. No significant difference was observed for final VAS pain score (MD = -0.53; 95% CI, -1.2 to 1.05; p = .13) and Tegner scale (MD = 0.31; 95% CI, -1.05 to 1.66; p = .66) in either group. Our results suggest that augmented microfracture is superior to microfracture alone in the treatment of talar OLTs based on the AOFAS, MOCART, VAS score, complication rate, and revision ratio. Therefore, microfracture with augmentation should be considered as a treatment for OLTs of talus. However, more randomized trials are still required to determine the long-term superiority of MFx+.

[Numerical study on the effect of the geometry size of multi-chamber infusion bag on its bursting force].

This study explored the variation of bursting force of multi-chamber infusion bag with different geometry size, providing guidance for its optimal design. Models of single-chamber infusion bag with different size were established. The finite element based on fluid cavity method was adopted to calculate the fluid-solid coupling deformation process of infusion bag to obtain corresponding critical bursting force. As a result, we proposed an empirical formula predicting the critical bursting force of one chamber infusion bag with specified geometry size. Besides, a theoretical analysis, which determines the force condition of three chamber infusion bag when falling from high altitude, was conducted. The proportion of force loaded on different chamber was gained. The results indicated that critical bursting force is positively related to the length and width of the chamber, and negatively related to the height of the chamber. While the infusion bag falling, the impact force loaded on each chamber is proportional to the total liquid within it. To raise the critical bursting force of in fusion bag, a greater length and width corresponding to reduced height are recommended considering the volume of liquid needed to be filled in.

[Finite element method simulating bursting process of multi-chamber flexible package infusion bag].

This study aims to overcome the shortcomings such as low efficiency, high cost and difficult to carry out multi-parameter research, which limited the optimization of infusion bag configuration and manufacture technique by experiment method. We put forward a fluid cavity based finite element method, and it could be used to simulate the stress distribution and deformation process of infusion bag under external load. In this paper, numerical models of infusion bag with different sizes was built, and the fluid-solid coupling deformation process was calculated using the fluid cavity method in software ABAQUS subject to the same boundary conditions with the burst test. The peeling strength which was obtained from the peeling adhesion test was used as failure criterion. The calculated resultant force which makes the computed peeling stress reach the peeling strength was compared with experiment data, and the stress distribution was analyzed compared with the rupture process of burst test. The results showed that considering the errors caused by the difference of weak welding and eccentric load, the flow cavity based finite element method can accurately model the stress distribution and deformation process of infusion bag. It could be useful for the optimization of multi chamber infusion bag configuration and manufacture technique, leading to cost reduction and study efficiency improvement.

Effect of TIPA on mechanical properties and hydration properties of cement-lithium slag system.

Effect of triisopropanolamine (TIPA) on compressive strength and hydration properties of cement-lithium slag (LS, 30%) paste was studied. The results demonstrated that the addition of TIPA is advantageous for compressive strength at 7 d, 28 d and 60 d. The reason was related to the pore complexity and hydration process of cement and LS. TIPA reduced the total porosity, and increased the fractal dimension, making the pore structure more complicated. In addition, TIPA promoted the pozzolanic reaction of LS and the hydration of cement, expediting the formation of C-S(A)-H gel. TIPA accelerated the dissolution of aluminate ions, silicate ions and ferric ions in the pore solution, thereby accelerating the pozzolanic reaction of LS. During the hydration of cement-LS paste, TIPA facilitated the conversion of ettringite to the AFm-like phase and produced more C-A-S-H gel by promoting the dissolution of aluminate ions.

Kartogenin Enhances Collagen Organization and Mechanical Strength of the Repaired Enthesis in a Murine Model of Rotator Cuff Repair.

PURPOSE: To investigate the use of kartogenin (KGN) in augmenting healing of the repaired enthesis after rotator cuff repair in a murine model. METHODS: Seventy-two C57BL/6 wild-type mice underwent unilateral detachment and transosseous repair of the supraspinatus tendon augmented with either fibrin sealant (control group; n = 36) or fibrin sealant containing 100 µmol/L of KGN (experimental group; n = 36) applied at the repair site. Postoperatively, mice were allowed free cage activity without immobilization. Mice were humanely killed at 2 and 4 weeks postoperatively. Repair site integrity was evaluated histologically through fibrocartilage formation and collagen fiber organization and biomechanically through load-to-failure testing of the supraspinatus tendon-bone construct. RESULTS: At 2 weeks, no differences were noted in percent area of fibrocartilage, collagen organization, or ultimate strength between groups. At 4 weeks, superior collagen fiber organization (based on collagen birefringence [17.3 ± 2.0 vs 7.0 ± 6.5 integrated density/µm2; P < .01]) and higher ultimate failure loads (3.5 ± 0.6 N vs 2.3 ± 1.1 N; P = .04) were seen in the KGN group. The percent area of fibrocartilage (13.2 ± 8.4% vs 4.4 ± 5.4%; P = .04) was higher in the control group compared with the KGN group. CONCLUSIONS: Rotator cuff repair augmentation with KGN improved the collagen fiber organization and biomechanical strength of the tendon-bone interface at 4 weeks in a murine model. CLINICAL RELEVANCE: These findings have implications for improving the structural integrity of the repaired enthesis and potentially reducing the retear rate after rotator cuff repair, which can ultimately lead to improvements in clinical outcomes.

Silencing of Long Non-Coding RNA NONHSAT009968 Ameliorates the Staphylococcal Protein A-Inhibited Osteogenic Differentiation in Human Bone Mesenchymal Stem Cells.

BACKGROUND/AIMS: Osteomyelitis is defined as an inflammation of the bones and bone marrow. The inflammatory microenvironment attenuates the osteogenic differentiation capacity of stem cells and inhibits osteoblast-mediated bone formation, leading to net bone loss. However, the whole expression profile, function and side effect of long non-coding RNAs (lncRNAs) on osteogenic differentiation of stem cells in an inflammatory microenvironment of osteomyelitis are not known. METHODS: In the present study, human bone mesenchymal stem cells (hBMSCs) were treated with different concentrations of Staphylococcal protein A (SpA) to trigger an inflammatory microenvironment in vitro to partly duplicate the inflammatory microenvironment of osteomyelitis, which was confirmed using ELISA for detecting the inflammatory cytokines. The complete expression profiles of lncRNAs and mRNA during osteogenic differentiation of hBMSCs in an inflammatory microenvironment triggered by SpA were analyzed using a lncRNA microarray. LncRNA expression levels were verified by quantitative reverse transcription PCR analysis (qRT-PCR). The expression of NONHSAT009968 in hB-MSCs was silenced by infection with lentivirus expressing NONHSAT009968-shRNA. The expression of Runx2, OCN, OPN, COL1A1, and alkaline phosphatase (ALP) activity was detected by western blot. Alizarin red staining and ALP activity detection were carried out. RESULTS: The results of ELISA showed that SpA treatment induced secretion of inflammatory cytokines IL-1A, IL-6, and TNFA. The results of alizarin red staining and ALP detection showed that SpA treatment suppressed the osteogenic differentiation of hBMSCs. A total of 2033 lncRNAs were found with aberrant expression in SpA-treated hBMSCs compared to controls. Among these lncRNAs, 641 were down-regulated and 1392 were up-regulated. Based on the results of qRT-PCR, lncRNA NONHSAT009968 was chosen for further investigation. The results of alizarin red staining, ALP activity detection, and western blot detection of Runx2, OCN, OPN, COL1A1, and ALP indicated that NONHSAT009968 silencing ameliorates SpA-inhibited osteogenic differentiation in hBMSCs. CONCLUSION: Our present study provides a basis for future analyses of the role of lncRNAs in osteoblastic differentiation in an inflammatory environment triggered by SpA, and lncRNA NONHSAT009968 might be a new target for promoting osteoblast formation.

MiR-145 suppresses cell proliferation and motility by inhibiting ROCK1 in hepatocellular carcinoma.

MicroRNAs (miRNAs) play key roles in cancer development and progression. In the present study, we investigated the role of miR-145 in the progression of hepatocellular carcinoma (HCC). Ten HCC cell lines and samples from 96 patients with HCC were analyzed for the expression of miR-145 by quantitative real-time polymerase chain reaction (qRT-PCR). Overexpression of miR-145 was established by transfecting mimics into HepG2 and QGY-7703 cells. Cell proliferation and cell migration were assessed by cell viability assay and transwell assay. Western blot was to verify ROCK1 as a novel target gene of miR-145. Our results showed that miR-145 was frequently downregulated in HCC tumors and cell lines. Overexpression of miR-145 in HCC cell lines significantly inhibited cell proliferation, migration, and invasion in vitro. ROCK1 was identified as a target of miR-145, and ectopic expression of miR-145 downregulated ROCK1. Together, these findings indicate that miR-145 acts as a tumor suppressor and its downregulation in tumor tissues may contribute to the progression and metastasis of HCC through a mechanism involving ROCK1, suggesting miR-145 as a potential new diagnostic and therapeutic target for the treatment of HCC.

Dynamic Perfusion Culture of Human Outgrowth Endothelial Progenitor Cells on Demineralized Bone Matrix In Vitro.

BACKGROUND The aim of this study was to investigate the proliferation, differentiation, and tube formation of human outgrowth endothelial progenitor cells (OECs) cultured with porous demineralized bone matrix (DBM) under a dynamic perfusion system in vitro. MATERIAL AND METHODS OECs were isolated, expanded, characterized, eGFP-transfected and seeded on DBM scaffold and cultured under static or dynamic perfusion conditions, and continuously observed under fluorescence microscope. DBM scaffolds were harvested on day six for RT-PCR and western blot assay to analyze the mRNA and protein expression level of CD34, VE-cadherin, and VEGF. Scanning electron microscope (SEM) was used to observe the tube formation of OECs seeded on DBM scaffolds. RESULTS The results showed the cell density of OECs on DBM was higher when exposed to shear stress generated by a dynamic perfusion system. Shear stress also markedly increased the expression level of VE-cadherin and VEGF and decreased the expression of CD34, at both mRNA and protein levels. SEM showed that the shear-stressed OECs formed tube-like structures inside the pores of DBM scaffolds. CONCLUSIONS A dynamic perfusion system can be used as an innovative method for the rapid vascularization in tissue engineering, which can accelerate the proliferation and differentiation of OECs and the vascularization of implanted scaffolds.

Efficacy and safety of the Latarjet procedure for the treatment of athletes with glenoid bone defects ≥ 20%: a single-arm meta-analysis.

BACKGROUND: The shoulder joint is the most commonly dislocated joint in the human body, and the recurrence rate exceeds 50% after nonsurgical treatment. Although surgical treatment reduces the recurrence rate, there is controversy regarding the optimal surgical approach. Previous studies suggest that the Latarjet procedure yields favourable outcomes for specific populations at risk of recurrence, such as competitive athletes with significant glenoid defects. However, most of the existing related research consists of nonrandomized controlled trials with small sample sizes, and there is a lack of strong evidence regarding the efficacy and safety of the Latarjet procedure. METHODS: The PubMed, Embase, Cochrane Library, and Web of Science databases were systematically searched. Athletes with ≥ 20% glenoid defects were selected for inclusion. The following data were extracted: general patient information, instability rates, return to sports (RTS) rates, imaging features (graft positioning rate and graft healing rate), functional assessments [Rowe score, Athletic Shoulder Outcome Scoring System(ASOSS), visual analogue scale (VAS), forward flexion function, and external rotation function], and complications. RESULTS: After excluding suspected duplicate cases, a total of 5 studies were included in this meta-analysis. The studies involved a total of 255 patients, including 237 males (93%) and 18 females (7%). The average age at the time of surgery was 25.4 ± 8.5 years. All the studies had a minimum follow-up period of 2 years, with an average follow-up time of 48.7 ± 18.9 months. The pooled rate of return to sport (RTS) was 94.3% (95% CI: 87.3%, 98.8%), and 86.1% (95% CI: 78.2%, 92.5%) of patients returned to their preoperative level of activity. The pooled redislocation rate was 1.1% (95% CI: 0%, 3.8%). Regarding the imaging results, the combined graft retention rate was 92.1% (95% CI: 88.1%, 95.5%), and the graft healing rate was 92.1% (95% CI: 88%, 95.4%). Postoperative functional evaluation revealed that the combined Rowe score, ASOSS score, and VAS score were 93.7 ± 6.5 points, 88.5 ± 4.4 points, and 1.1 ± 10 points, respectively. The forward flexion and external rotation angles were 170.9 ± 6.9 degrees and 65.6 ± 4.5 degrees, respectively. After excluding one study with unclear complications, the combined complication rate was 9.4% (95% CI: 1.0%, 23.6%). CONCLUSION: For athletes with shoulder instability and a total of ≥ 20% glenoid bone defects, the Latarjet procedure can achieve excellent functional outcomes, with the majority of patients returning to preoperative levels of sports activity. This procedure also leads to a low recurrence rate. Therefore, the Latarjet procedure has been proven to be a safe and effective treatment.

Reconstruction of medial meniscus posterior portion deficiency in pigs with an autologous patellar tendon graft: an experimental study.

OBJECTIVE: This study was performed to investigate the effectiveness of two surgical procedures, autologous patellar tendon graft reconstruction and trans-tibial plateau pull-out repair, using a pig model. The primary focus was to assess the repair capability of medial meniscus posterior portion (MMPP) deficiency, the overall structural integrity of the meniscus, and protection of the femoral and tibial cartilage between the two surgical groups. The overall aim was to provide experimental guidelines for clinical research using these findings. METHODS: Twelve pigs were selected to establish a model of injury to the MMPP 10 mm from the insertion point of the tibial plateau. They were randomly divided into three groups of four animals each: reconstruction (autologous tendon graft reconstruction of the MMPP), pull-out repair (suture repair of the MMPP via a trans-tibial plateau bone tunnel), and control (use of a normal medial meniscus as the negative control). The animals were euthanized 12 weeks postoperatively for evaluation of the meniscus, assessment of tendon bone healing, and gross observation of knee joint cartilage. The tibial and femoral cartilage injuries were evaluated using the International Society for Cartilage Repair (ICRS) grade and Mankin score. Histological and immunohistochemical staining was conducted on the meniscus-tendon junction area, primary meniscus, and tendons. The Ishida score was used to evaluate the regenerated meniscus in the reconstruction group. Magnetic resonance imaging (MRI) was used to evaluate meniscal healing. RESULTS: All 12 pigs recovered well after surgery; all incisions healed without infection, and no obvious complications occurred. Gross observation revealed superior results in the reconstruction and pull-out repair groups compared with the control group. In the tibial cartilage, the reconstruction group had ICRS grade I injury whereas the pull-out repair and control groups had ICRS grade II and III injury, respectively. The Mankin score was significantly different between the reconstruction and control groups; histological staining showed that the structure of the regenerated meniscus in the reconstruction group was similar to that of the original meniscus. Immunohistochemical staining showed that the degree of type I and II collagen staining was similar between the regenerated meniscus and the original meniscus in the reconstruction group. The Ishida score was not significantly different between the regenerated meniscus and the normal primary meniscus in the reconstruction group. MRI showed that the MMPP in the reconstruction and pull-out repair groups had fully healed, whereas that in the control group had not healed. CONCLUSION: Autologous patellar tendon graft reconstruction of the MMPP can generate a fibrocartilage-like regenerative meniscus. Both reconstruction and pull-out repair can preserve the structural integrity of the meniscus, promote healing of the MMPP, delay meniscal degeneration, and protect the knee cartilage.

Intra-articular injection of ascorbic acid enhances microfracture-mediated cartilage repair.

Previous studies have confirmed that ascorbic acid (AA) can promote cartilage repair and improve cartilage differentiation in bone marrow mesenchymal stem cells. However, the use of microfracture (MFX) combined with AA to repair cartilage damage has not been studied. This study established a rabbit animal model and treated cartilage injury with different concentrations of AA combined with MFX. Macroscopic observations, histological analysis, immunohistochemical analysis and reverse transcription quantitative polymerase chain reaction analysis of TGF-ß, AKT/Nrf2, and VEGF mRNA expression were performed. The results showed that intra-articular injection of AA had a positive effect on cartilage repair mediated by microfractures. Moreover, 10 mg/ml AA was the most effective at promoting cartilage repair mediated by microfractures. Intra-articular injection of AA promoted the synthesis of type II collagen and the formation of glycosaminoglycans by downregulating the mRNA expression of TGF-ß and VEGF. In summary, this study confirmed that AA could promote cartilage repair after MFX surgery.

Tandem Vinylogous Aldol and Intramolecular [2 + 2] Cycloaddition toward Benzocyclobutenes by UV Light Photocatalysis.

A facile and efficient radical tandem vinylogous aldol and intramolecular [2 + 2] cycloaddition reaction for direct synthesis of cyclobutane-containing benzocyclobutenes (BCBs) under extremely mild conditions without using any photocatalysts is reported. This approach exhibited definite compatibility with functional groups and afforded new BCBs with excellent regioselectivity and high yields. Moreover, detailed mechanism studies were carried out both experimentally and theoretically. The readily accessible, low-cost, and ecofriendly nature of the developed strategy will endow it with attractive applications in organic and medicinal chemistry.

Dual-tissue transplantation versus osteochondral autograft transplantation in the treatment of osteochondral defects: a porcine model study.

BACKGROUND: Osteochondral injury is a common sports injury, and hyaline cartilage does not regenerate spontaneously when injured. However, there is currently no gold standard for treating osteochondral defects. Osteochondral autograft transplantation (OAT) is widely used in clinical practice and is best used to treat small osteochondral lesions in the knee that are < 2 cm2 in size. Autologous dual-tissue transplantation (ADTT) is a promising method with wider indications for osteochondral injuries; however, ADTT has not been evaluated in many studies. This study aimed to compare the radiographic and histological results of ADTT and OAT for treating osteochondral defects in a porcine model. METHODS: Osteochondral defects were made in the bilateral medial condyles of the knees of 12 Dian-nan small-ear pigs. The 24 knees were divided into the ADTT group (n = 8), OAT group (n = 8), and empty control group (n = 8). At 2 and 4 months postoperatively, the knees underwent gross evaluation based on the International Cartilage Repair Society (ICRS) score, radiographic assessment based on CT findings and the magnetic resonance observation of cartilage repair tissue (MOCART) score, and histological evaluation based on the O'Driscoll histological score of the repair tissue. RESULTS: At 2 months postoperatively, the ICRS score, CT evaluation, MOCART score, and O'Driscoll histological score were significantly better in the OAT group than the ADTT group (all P < 0.05). At 4 months postoperatively, the ICRS score, CT evaluation, MOCART score, and O'Driscoll histological score tended to be better in the OAT group than the ADTT group, but these differences did not reach statistical significance (all P > 0.05). CONCLUSIONS: In a porcine model, ADTT and OAT are both effective treatments for osteochondral defects in weight bearing areas. ADTT may be useful as an alternative procedure to OAT for treating osteochondral defects.

Experimental study of a 3D-printing technique combined with biphasic calcium phosphates to treat osteonecrosis of the femoral head in a canine model.

OBJECTIVE: This study was aimed to use a digital design of 3D-printing technology to create a surgical navigation template. At the same time, biphasic calcium phosphate (BCP) was applied to treat osteonecrosis of the femoral head (ONFH) in animal models, based on accurate positioning of necrotic lesions in the navigation templates and observation of its therapeutic effect. METHODS: Fifteen healthy adult male and female beagle dogs weighing 20 + 2 kg were randomly divided into three groups (n = 5) after establishing a model of ONFH using the liquid nitrogen freezing method. Each model underwent necrotic lesion creation and BPC implantations on one side of the femoral head and only necrotic lesion creation on the other side of the femoral head. Each group underwent CT examination, gross observation, histological examination and immunohistochemical staining at 6 weeks, 12 weeks and 18 weeks postoperatively. RESULTS: At weeks 6, 12, and 18, CT and gross examination showed that the necrotic area in the experimental group was basically intact and had been completely raised by BCP material. In the control group, there were signs of bone repair in the femoral head, but there were still large bone defects and cavities. At week 18, extensive collapse of the cartilage surface was observed. Through histological examination, in the experimental group at 12 and 18 weeks, a large number of new and reconstructed bone trabeculae containing a large amount of collagen fibres were observed (P < 0.05), while in the control group, there was extensive necrosis of the bone trabeculae without cellular structural areas. Immunohistochemical examination observation: A large number of CD31-positive cells were observed in the experimental group at 6 weeks, gradually decreasing at 12 and 18 weeks (P < 0.05), while a small number of CD31-positive cells were observed in the control group at 18 weeks. CONCLUSION: The 3D-printed navigation template can accurately locate ONFH lesions. Implantation of BCP material can effectively play a supporting role, prevent the collapse of the loading surface, and induce bone formation and angiogenesis to some extent.