RESUMO
A broadband, electrically controlled, reconfigurable, circularly polarized reflective metasurface is presented. The chirality of the metasurface structure is changed by switching active elements, which benefits from the tunable current distributions generated by the elaborately designed structure under x-polarized and y-polarized waves. Notably, the proposed metasurface unit cell maintains a good circular-polarization efficiency in a broadband range of 6.82-9.96â GHz (fractional bandwidth of 37%) with a phase difference of π between the two states. As a demonstration, a reconfigurable circularly polarized metasurface containing 8 × 8 elements was simulated and measured. The results verify that the proposed metasurface can flexibly control circularly polarized waves in a broadband, realizing beam splitting, mirror reflection, and other beam manipulations from 7.4â GHz to 9.9â GHz (fractional bandwidth of 28.9%) by simply adjusting the loaded active elements. The proposed reconfigurable metasurface may offer a promising approach to electromagnetic wave manipulation or communication systems.
RESUMO
Perovskite solar cells based on two-dimensional/three-dimensional (2D/3D) hierarchical structure have attracted significant attention in recent years due to their promising photovoltaic performance and stability. However, obtaining a detailed understanding of interfacial mechanism at the 2D/3D heterojunction, for example, the ligand-chemistry-dependent nature of the 2D/3D heterojunction and its influence on charge collection and the final photovoltaic outcome, is not yet fully developed. Here we demonstrate the underlying 3D phase templates growth of quantum wells (QWs) within a 2D capping layer, which is further influenced by the fluorination of spacers and compositional engineering in terms of thickness distribution and orientation. Better QW alignment and faster dynamics of charge transfer at the 2D/3D heterojunction result in higher charge mobility and lower charge recombination loss, largely explaining the significant improvements in charge collection and open-circuit voltage (VOC) in complete solar cells. As a result, 2D/3D solar cells with a power-conversion efficiency of 21.15% were achieved, significantly higher than the 3D counterpart (19.02%). This work provides key missing information on how interfacial engineering influences the desirable electronic properties of the 2D/3D hierarchical films and device performance via ligand chemistry and compositional engineering in the QW layer.
RESUMO
The two-dimensional (2D) perovskites stabilized by alternating cations in the interlayer space (ACI) define a new type of structure with different physical properties than the more common Ruddlesden-Popper counterparts. However, there is a lack of understanding of material crystallization in films and its influence on the morphological/optoelectronic properties and the final photovoltaic devices. Herein, we undertake in situ studies of the solidification process for ACI 2D perovskite (GA)(MA) nPb nI3 n+1 (⟨ n⟩ = 3) from ink to solid-state semiconductor, using solvent mixture of DMSO:DMF (1:10 v/v) as the solvent and link this behavior to solar cell devices. The in situ grazing-incidence X-ray scattering (GIWAXS) analysis reveals a complex journey through disordered sol-gel precursors, intermediate phases, and ultimately to ACI perovskites. The intermediate phases, including a crystalline solvate compound and the 2D GA2PbI4 perovskite, provide a scaffold for the growth of the ACI perovskites during thermal annealing. We identify 2D GA2PbI4 to be the key intermediate phase, which is strongly influenced by the deposition technique and determines the formation of the 1D GAPbI3 byproducts and the distribution of various n phases of ACI perovskites in the final films. We also confirm the presence of internal charge transfer between different n phases through transient absorption spectroscopy. The high quality ACI perovskite films deposited from solvent mixture of DMSO:DMF (1:10 v/v) deliver a record power conversion efficiency of 14.7% in planar solar cells and significantly enhanced long-term stability of devices in contrast to the 3D MAPbI3 counterpart.
RESUMO
A broadband tunable metamaterial graphene absorber is investigated in this paper. The unit cell of the proposed metamaterial graphene absorber is composed of four patch resonators. By tuning the chemical potential of graphene and the geometric size of each patch, the simulated total reflectivity is less than -10 dB from 22.02 to 36.61 THz and with the total thickness of 0.76 um (only 0.09λ at the lowest frequency). The analysis of the surface current, magnetic field and power flow distributions has been performed to better understand the absorption mechanism. Moreover, this proposed absorber achieves its bandwidth tunable characteristics through a voltage biasing of the graphene's Fremi level. This proposed metamaterial graphene absorber (MGA) could be used as smart absorbers, photovoltaic devices and tunable sensors.
RESUMO
In this paper, a circular polarizer comprising dual semicircular split-rings (DSSRs) is presented. By placing it above an elliptical radiator that radiates linearly polarized (LP) waves, dual-layer patch antennas capable of radiating right-hand (RH) or left-hand (LH) circularly polarized (CP) waves are achieved in terms of the different offset direction of the bottom splits of the DSSRs. Because of both the capacitive coupling to the radiator and the degenerate modes existing in the excited DSSRs, the DSSRs collaboratively result in a circularly polarized radiation, successfully converting incident LP waves into CP ones. Simulated results show that the impedance, axial ratio (AR), and gain frequency response of both proposed CP antennas are identical, with a simulated 3-dB AR bandwidth of 72 MHz covering 2.402â»2.474 GHz and a gain enhanced by 3.9 dB. The proposed antennas were fabricated and measured, revealing an operational bandwidth of 65 MHz (2.345â»2.41 GHz) and a peak gain up to 9 dBi. Moreover, a low profile of 0.063λ0 is maintained. The proposed CP antennas could be as a candidate for wireless target detection applications in terms of their identical frequency response property.
RESUMO
We placed active magnetic metamaterials on metallic surface to implement a tunable reflector with excellent agile performance. By incorporating active elements into the unit cells of the magnetic metamaterial, this active magnetic metamaterial can be tuned to switch function of the reflector among a perfect absorber, a perfect reflector and a gain reflector. This brings about DC control lines to electrically tune the active magnetic metamaterial with positive loss, zero loss and even negative loss. The design, analytical and numerical simulation methods, and experimental results of the tunable reflector are presented.
RESUMO
This study examined the longer-term individual- and school-level changes in students seven months after a one-hour delay in school start time (SST). Two cohorts of Grade 11 students (N = 227; 60.8% female, age = 17.0 [0.85]) at a residential high school in Hong Kong completed a questionnaire assessing sleep duration, insomnia symptoms, depression, anxiety, stress, and subjective well-being in 2017 and 2018, respectively. One of the cohorts was reassessed seven months after the implementation of a delay in SST, from 7:30am to 8:30am (n = 83, 65.1% female). School-level data on breakfast consumption, attendance, tardiness, and health clinic visits were collected. Between-group and within-group prospective comparisons suggest that the delay in SST was associated with improved sleep duration, mental health, and life satisfaction. School-level data revealed increased breakfast consumption and decreased unexcused absences, tardiness, and clinic visits.
RESUMO
Lead halide perovskites have been of paramount interest for solution-processable solar cells, reaching power conversion efficiencies larger than 25%. In this spotlight, we will provide a systematic overview of the influence of different solution-based processing routes of lead halide perovskites on their phase transformation and conversion as revealed through in-situ X-ray-scattering experiments. These experiments were performed in conditions closely mimicking thin film processing methods and conditions used for thin film solar cell device fabrication and therefore provide critical information about the mechanism of the phase transformation, its onset, the kinetics, as well as the emergence and disappearance of various (meso)phases along the way. The measurements capture the overall solidification and conversion process of lead halide perovskite inks into solid films via so-called one-step and two-step spin-coating processes as well as blade coating and hot casting. Processing routes are applied to films based on basic components as well as mixtures of different anions and cations, solvents, and antisolvents, all of which deeply affect the thin film microstructure and morphology of the light-absorbing semiconductor and associated solar cell devices.
RESUMO
Mixed-halide organolead perovskites ( MAPbX 3 ) are of great interest for both single-junction and tandem solar cells because of their wide band gap. In this study, we investigate the family of mixed iodide/bromide (I/Br) and bromide/chloride (Br/Cl) perovskites, revealing the strong influence of halide substitution on electronic properties, morphology, film composition, and phase segregation. A qualitative blue shift with the I â Br â Cl series was observed, with the resulting optical absorption ranging from 420 to 800 nm covering nearly the entire visible region. The ionization potential increases from ≈6.0 to ≈7.0 eV as the halide composition changes from I to Br. However, with Cl components, the valence band position shows little variation, while the conduction band minimum shifts to a lower value with increasing Cl concentration. By collecting XPS spectra as a function of the sputtering depth, we observed halide segregation in both I/Br and Br/Cl mixed-halide perovskite films, where the large halide ion (I in the I/Br mix or Br in the Br/Cl mix) is preferentially found on the surface of the film and the smaller halide ion (Br in the I/Br mix or Cl in the Br/Cl mix) accumulates at the bottom of the film. These differences in the band structure, electronic properties, morphology, and film composition impacted the device performance: a decreased short-circuit current density and increased open-circuit voltage were observed with the I â Br â Cl series. This study highlights the role of halides in the band structure and phase segregation in mixed-halide perovskite solar cells and provides a foundational framework for future optoelectronic applications of these materials.
RESUMO
Neuromorphic computing has the potential to address the inherent limitations of conventional integrated circuit technology, ranging from perception, pattern recognition, to memory and decision-making ( Acc. Chem. Res. 2019, 52 (4), 964-974) ( Nature 2004, 431 (7010), 796-803) ( Nat. Nanotechnol. 2013, 8 (1), 13-24). Despite their low power consumption ( Nano Lett. 2016, 16 (11), 6724-6732), traditional two-terminal memristors can perform only a single function while lacking heterosynaptic plasticity ( Nanotechnology 2013, 24 (38), 382001). Inspired by the unconditioned reflex, multiterminal memristive transistors (memtransistor) were developed to realize complex functions, such as multiterminal modulation and heterosynaptic plasticity ( Nature 2018, 554, (7693), 500-504). Here we combine a hybrid metal halide perovskite with an organic conjugated polymer to form heterojunction transistors that are responsive to both electrical and optical stimuli. We show that the synergistic effects of photoinduced ion migration in the perovskite and electronic transport in the polymer layers can be exploited to realize memristive functions. The device combines reversible, nonvolatile conductance modulation with large switching current ratios, high endurance, and long retention times. Using in situ scanning Kelvin probe microscopy and variable-temperature charge transport measurement, we correlate the collective effects of bias-induced and photoinduced ion migration with the heterosynaptic behavior observed in this hybrid memtransistor. The hybrid heterojunction channel concept is expected to be applicable to other material combinations making it a promising platform for deployment in innovative neuromorphic devices of the future.
RESUMO
Controlling the morphology of metal halide perovskite layers during processing is critical for the manufacturing of optoelectronics. Here, a strategy to control the microstructure of solution-processed layered Ruddlesden-Popper-phase perovskite films based on phenethylammonium lead bromide ((PEA)2 PbBr4 ) is reported. The method relies on the addition of the organic semiconductor 2,7-dioctyl[1]benzothieno[3,2-b]benzothiophene (C8 -BTBT) into the perovskite formulation, where it facilitates the formation of large, near-single-crystalline-quality platelet-like (PEA)2 PbBr4 domains overlaid by a ≈5-nm-thin C8 -BTBT layer. Transistors with (PEA)2 PbBr4 /C8 -BTBT channels exhibit an unexpectedly large hysteresis window between forward and return bias sweeps. Material and device analysis combined with theoretical calculations suggest that the C8 -BTBT-rich phase acts as the hole-transporting channel, while the quantum wells in (PEA)2 PbBr4 act as the charge storage element where carriers from the channel are injected, stored, or extracted via tunneling. When tested as a non-volatile memory, the devices exhibit a record memory window (>180 V), a high erase/write channel current ratio (104 ), good data retention, and high endurance (>104 cycles). The results here highlight a new memory device concept for application in large-area electronics, while the growth technique can potentially be exploited for the development of other optoelectronic devices including solar cells, photodetectors, and light-emitting diodes.
RESUMO
Eco-friendly printing is important for mass manufacturing of thin-film photovoltaic (PV) devices to preserve human safety and the environment and to reduce energy consumption and capital expense. However, it is challenging for perovskite PVs due to the lack of eco-friendly solvents for ambient fast printing. In this study, we demonstrate for the first time an eco-friendly printing concept for high-performance perovskite solar cells. Both the perovskite and charge transport layers were fabricated from eco-friendly solvents via scalable fast blade coating under ambient conditions. The perovskite dynamic crystallization during blade coating investigated using in situ grazing incidence wide-angle X-ray scattering (GIWAXS) reveals a long sol-gel window prior to phase transformation and a strong interaction between the precursors and the eco-friendly solvents. The insights enable the achievement of high quality coatings for both the perovskite and charge transport layers by controlling film formation during scalable coating. The excellent optoelectronic properties of these coatings translate to a power conversion efficiency of 18.26% for eco-friendly printed solar cells, which is on par with the conventional devices fabricated via spin coating from toxic solvents under inert atmosphere. The eco-friendly printing paradigm presented in this work paves the way for future green and high-throughput fabrication on an industrial scale for perovskite PVs.
RESUMO
The ability to control or prevent phase segregation in perovskites is crucial to realizing stable and tunable mixed-halide optoelectronic devices. In this work, we systematically examine the impact of alkali-metal-cation (Cs+ and K+) concentration on the band structure, chemical composition, phase segregation, and polycrystalline microstructure on formamidinium-dominated mixed-halide mixed-cation perovskite films. It was found that the incorporation of Cs+ and K+ cations decreases the work function and the core levels of all components shift toward higher binding energy consistent with n-doping the perovskite film, which facilitates electron transfer to the electron transport layer TiO2. A concentration-dependent film structure was observed by X-ray photoemission spectroscopy and grazing incidence wide-angle X-ray scattering where the halides and cations are distributed evenly across perovskite films at low metallic cation concentration (5%). A high metal-cation ratio (20%) leads to halide segregation within the perovskite film and the surface becomes bromide-poor, whereas the bromide and metal cations diffuse more deeply within the film. These differences in electronic properties, element distribution, and film morphology were reflected in the device performance where the power conversion efficiency of low-metallic-cation concentration (5% of Cs+ and K+) perovskite solar cells is ≈5% higher than the high-concentration ones (20%). This study provides valuable chemical and physical insight into the underlying trade-offs in the careful tuning of electrical properties and film structure to optimize multication and mixed-halide hybrid perovskites.
RESUMO
The morphology of conjugated polymer thin films, determined by the kinetics of film drying, is closely correlated with their electrical properties. Herein, we focused on dramatic changes in the thin-film morphology of blade-coated poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} caused by the effect of solvent and coating temperature. Through in situ measurements, the evolution of polymer aggregates and crystallites, which plays a decisive role in the formation of the charge-transport pathway, was observed in real time. By combining in situ ultraviolet-visible spectroscopy and in situ grazing-incidence wide-angle X-ray scattering analysis, we could identify five distinct stages during the blade-coating process; these stages were observed irrespective of the solvent and coating temperature used. The five stages are described in detail with a proposed model of film formation. This insight is an important step in understanding the relationship between the morphology of thin polymer films and their charge-transport properties as well as in optimizing the structural evolution of thin films.
RESUMO
Understanding and manipulation of surface impedance in graphene hybrid structure is a significant issue for applications of graphene-based optoelectronics devices. In order to achieve this purpose in the terahertz region, analytical expressions for the impedances of metasurface were derived, which allows us to easily understand the relationship between physical dimensions and impedance. Simulation results show an excellent agreement with the analytical predictions. In addition, we focus on the synthetic impedance when square patch and graphene sheet joined together, discuss the influence of the size of metasurface as well as chemical potentiality as for graphene on the synthetic impedance. Based on these results, a number of absorbers as well as optical devices can be designed that utilize impedance metasurfaces.
RESUMO
Perovskite solar cells increasingly feature mixed-halide mixed-cation compounds (FA1- x - y MAx Csy PbI3- z Brz ) as photovoltaic absorbers, as they enable easier processing and improved stability. Here, the underlying reasons for ease of processing are revealed. It is found that halide and cation engineering leads to a systematic widening of the anti-solvent processing window for the fabrication of high-quality films and efficient solar cells. This window widens from seconds, in the case of single cation/halide systems (e.g., MAPbI3 , FAPbI3 , and FAPbBr3 ), to several minutes for mixed systems. In situ X-ray diffraction studies reveal that the processing window is closely related to the crystallization of the disordered sol-gel and to the number of crystalline byproducts; the processing window therefore depends directly on the precise cation/halide composition. Moreover, anti-solvent dripping is shown to promote the desired perovskite phase with careful formulation. The processing window of perovskite solar cells, as defined by the latest time the anti-solvent drip yields efficient solar cells, broadened with the increasing complexity of cation/halide content. This behavior is ascribed to kinetic stabilization of sol-gel state through cation/halide engineering. This provides guidelines for designing new formulations, aimed at formation of the perovskite phase, ultimately resulting in high-efficiency perovskite solar cells produced with ease and with high reproducibility.