Nanocellulose-Based Hybrid Scaffolds for Skin and Bone Tissue Engineering: A 10-Year Overview.

Cellulose, the most abundant polymer on Earth, has been widely utilized in its nanoform due to its excellent properties, finding applications across various scientific fields. As the demand for nanocellulose continues to rise and its ease of use becomes apparent, there has been a significant increase in research publications centered on this biomaterial. Nanocellulose, in its different forms, has shown tremendous promise as a tissue engineered scaffold for regeneration and repair. Particularly, nanocellulose-based composites and scaffolds have emerged as highly demanding materials for both soft and hard tissue engineering. Medical practitioners have traditionally relied on collagen and its analogue, gelatin, for treating tissue damage. However, the limited mechanical strength of these biopolymers restricts their direct use in various applications. This issue can be overcome by making hybrids of these biopolymers with nanocellulose. This review presents a comprehensive analysis of the recent and most relevant publications focusing on hybrid composites of collagen and gelatin with a specific emphasis on their combination with nanocellulose. While bone and skin tissue engineering represents two areas where a majority of researchers are concentrating their efforts, this review highlights the use of nanocellulose-based hybrids in these contexts.

Recent Advances of carbon Pathways for Sustainable Environment development.

Carbon dots (CDs) are an emerging type of carbon nanomaterial with strong biocompatibility, distinct chemical and physical properties, and low toxicity. CDs may emit fluorescence in the ultraviolet (UV) to near-infrared (NIR) range, which renders them beneficial for biomedical applications. CDs are usually made from carbon precursors and can be synthesized using top-down and bottom-up methods and it can be easily functionalized using different methods. For specific cases of biomedical applications carbon dot functionalization augments the materials' characteristics. Novel functionalization techniques are still being investigated. This review will look at the benefits of functionalization to attain a high yield and various biological applications. Biomedical applications such as photodynamic and photothermal therapy, biosensing, bioimaging, and antiviral and antibacterial properties will be covered in this review. The future applications of green synthesized carbon dots will be determined in part by this review.

High-sensitivity Troponin I Predicts Major Cardiovascular Events after Non-Cardiac Surgery: A Vascular Events in Non-Cardiac Surgery Patients Cohort Evaluation (VISION) Substudy.

BACKGROUND: Myocardial injury after non-cardiac surgery (MINS), based on measurement of troponin T, is associated with perioperative major adverse cardiovascular events (MACE). We therefore determined the high-sensitivity troponin I (hsTnI) thresholds associated with 30 day MACE after non-cardiac surgery. METHODS: We performed a nested biobank cohort study of 4553 patients from the Vascular Events in Non-Cardiac Surgery Patients Cohort Evaluation (VISION) Study. We measured hsTnI (ADVIA Centaur® hsTnI assay) on postoperative days 1 to 3 in patients ≥45 years undergoing non-cardiac surgery. An iterative Cox proportional hazard model determined peak postoperative hsTnI thresholds independently associated with MACE (i.e., death, myocardial infarction occurring on postoperative day 4 or after, non-fatal cardiac arrest, or congestive heart failure) within 30 days after surgery. RESULTS: MACE occurred in 89/4545 (2.0%) patients. Peak hsTnI values of <75 ng/L, 75 ng/L to <1000 ng/L, and ≥1000 ng/L were associated with 1.2% (95% CI, 0.9-1.6), 7.1% (95% CI, 4.8-10.5), and 25.9% (95% CI, 16.3-38.4) MACE, respectively. Compared to peak hsTnI <75 ng/L, values 75 ng/L to <1000 ng/L and ≥1000 ng/L were associated with adjusted hazard ratios (aHR) of 4.53 (95% CI, 2.75-7.48) and 16.17 (95% CI, 8.70-30.07), respectively. MACE was observed in 9% of patients with peak hsTnI ≥75 ng/L vs 1% in patients with peak hsTnI <75 ng/L (aHR 5.76; 95% CI, 3.64-9.11). A peak hsTnI ≥75 ng/L was associated with MACE in the presence (aHR 9.35; 95% CI, 5.28-16.55) or absence (aHR 3.99; 95% CI, 2.19-7.25) of ischemic features of myocardial injury. CONCLUSION: A peak postoperative hsTnI ≥75 ng/L was associated with >5-fold increase in the risk of 30 days MACE compared to levels <75 ng/L. This threshold could be used for MINS diagnosis when the ADVIA Centaur hsTnI assay is used.Clinicaltrials.gov Registration Number: NCT00512109.

Multifunctional natural derived carbon quantum dots from Withania somnifera (L.) - Antiviral activities against SARS-CoV-2 pseudoviron.

Natural carbon dots (NCQDs) are expediently significant in the photo-, nano- and biomedical spheres owing to their facile synthesis, optical and physicochemical attributes. In the present study, three NCQDs are prepared and optimized from Withania somnifera (ASH) by one-step hydrothermal (bottom-up) method: HASHP (without dopant), nitrogen doped HASHNH3 (surface passivation using ammonia) and HASHEDA (surface passivation with ethylenediamine). The HR-TEM images reveal that HASHP, HASNH3, HASHEDA are spherically shaped with 2.5 ± 0.5 nm, 4 ± 1 nm and 5 ± 2 nm particle size, respectively, whereas FTIR confirms the aqueous solubility and nitrogen doping. The XRD patterns ensure that the NCQDs are amorphous and graphitic in nature. Comparatively, HASHNH3 (32.5%) and HASHEDA (27.6%) portray better fluorescence quantum yield than HASHP (5.6%). The increase in quantum yield for the doped NCQDs can be attributed to the surface passivation using ammonia and ethylenediamine. Surface passivation plays a crucial role in enhancing the fluorescence properties of quantum dots. The introduction of nitrogen through ammonia and ethylenediamine provides additional electronic states, possibly reducing non-radiative recombination sites and hence boosting the QY. In addition, an antiviral study unveils the striking potential of surface passivated NCQDs to curb Covid-19 crises with around 85% inhibition of SARS-CoV pseudoviron cells, which is better in comparison to the non-doped NCQDs. Hence, to understand the paramount efficacy of these NCQDs, a hypothesis on their possible mechanism of action against Covid-19 is discussed.

Divulging the anti-acetylcholinesterase activity of Colletotrichum lentis strain KU1 extract as sustainable AChE active site inhibitors.

Alzheimer's disease (AD), also called senile dementia is a neurodegenerative disease seen commonly in the elderly and is characterised by the formation of ß-amyloid plaques and neurofibrillary tangles (NFT). Though a complete understanding of the disease is lacking, recent studies showed the role of the enzyme acetylcholinesterase (AChE) in pathogenesis. Finding new lead compounds from natural sources has always been a quest for researchers. Endophytic fungi are a set of microbes that reside within plants without causing any harm. This study focuses on screening endophytes for the production of active acetylcholinesterase inhibitors. Five endophytic fungi were isolated from Catharanthus roseus and screened for AChE inhibitory activity. Three isolates were found to inhibit AChE inhibitory activity and were distinguished based on molecular and microscopic methods. The mycelial extract was taken for the bioassay-guided column chromatography and TLC was performed on the active fraction. The GC-MS and NMR analysis identified the active compounds in the extract as 9-hexadecen-1-ol and erucamide. Molecular docking studies revealed that the compounds are thermodynamically feasible and have significant glide scores. Computational studies revealed that the hydroxyl group of 9-hexadecen-1-ol forms a hydrogen bond with Ser 293 in the active site of AChE, whereas the active site interactions were predominantly hydrophobic in the case of erucamide and are reflected in AChE inhibition assays.

Miscibility, thermal degradation and rheological analysis of epoxy/MABS blends.

The effect of the addition of the methyl methacrylate acrylonitrile butadiene styrene (MABS) copolymer on the miscibility, thermal degradation and rheological properties of epoxy systems is described. Epoxy resin/MABS blends containing 5, 10, 15 and 20 phr MABS were prepared using the solution mixing technique. Homogenous blends obtained using this technique have undergone a polymerization reaction induced phase separation process by the introduction of the curing agent 4,4'-diaminodiphenyl sulfone (DDS). The isothermal rheology at four different temperatures, 150, 160, 170 and 180 °C, was used to examine the effect of MABS on the gelation and vitrification time. The evolution of storage modulus, loss modulus and tan delta was found to be closely related to the evolution of complex phase separation. The increase in the complex viscosity during curing was determined by in situ rheometry and theoretically analysed by fitting with the Williams-Landell-Ferry equation. An exponential increase in complex viscosity was observed, which was induced by cross-linking. The variation of Tg before and after curing was studied using DSC analysis and dynamic kinetic modeling of the curing process was carried out by utilizing dynamic DSC scans. Thermal stability studies of completely cured epoxy/MABS blends using thermogravimetric analysis revealed that all the blends and neat epoxy exhibited single step degradation. Thermal degradation kinetics was calculated using the Coats Redfern equation.

Nanocoatings: Universal antiviral surface solution against COVID-19.

In the current scenario, there is critical global demand for the protection of daily handling surfaces from the viral contamination to limit the spread of COVID-19 infection. The nanotechnologists and material scientists offer sustainable solutions to develop antiviral surface coatings for various substrates including fabrics, plastics, metal, wood, food stuffs etc. to face current pandemic period. They create or propose antiviral surfaces by coating them with nanomaterials which interact with the spike protein of SARS-CoV-2 to inhibit the viral entry to the host cell. Such nanomaterials involve metal/metal oxide nanoparticles, hierarchical metal/metal oxide nanostructures, electrospun polymer nanofibers, graphene nanosheets, chitosan nanoparticles, curcumin nanoparticles, etched nanostructures etc. The antiviral mechanism involves the repletion (depletion) of the spike glycoprotein that anchors to surfaces by the nanocoating and makes the spike glycoprotein and viral nucleotides inactive. The nature of interaction between the nanomaterial and virus depends on the type nanostructure coating over the surface. It was found that functional coating materials can be developed using nanomaterials as their polymer nanocomposites. The various aspects of antiviral nanocoatings including the mechanism of interaction with the Corona Virus, the different type of nanocoatings developed for various substrates, future research areas, new opportunities and challenges are reviewed in this article.

Fluorescence and Nonlinear Optical Response of Graphene Quantum Dots Produced by Pulsed Laser Irradiation in Toluene.

Graphene quantum dots (GQDs), the zero dimensional (0D) single nanostructures, have many exciting technological applications in diversified fields such as sensors, light emitting devices, bio imaging probes, solar cells, etc. They are emerging as a functional tool to modulate light by means of molecular engineering due to its merits, including relatively low extend of loss, large outstretch of spatial confinement and control via doping, size and shape. In this article, we present a one pot, facile and ecofriendly synthesis approach for fabricating GQDs via pulsed laser irradiation of an organic solvent (toluene) without any catalyst. It is a promising synthesis choice to prepare GQDs due to its fast production, lack of byproducts and further purification, as well as the control over the product by accurate tuning of laser parameters. In this work, the second (532 nm) and third harmonic (355 nm) wavelengths of a pulsed nanosecond Nd:YAG laser have been employed for the synthesis. It has been found that the obtained GQDs display fluorescence and is expected to have potential applications in optoelectronics and light-harvesting devices. In addition, nonlinear optical absorption of the prepared GQDs was measured using the open aperture z-scan technique (in the nanosecond regime). These GQDs exhibit excellent optical limiting properties, especially those synthesized at 532 nm wavelength.

A Detailed Review on Synthesis, Functionalization, Application, Challenges, and Current Status of Magnetic Nanoparticles in the Field of Drug Delivery and Gene Delivery System.

For progression of health care system, it has always been a challenge to the researchers for formulation to a type of advanced drug delivery system which will have less toxicity, targeted delivery and will be highly biodegradable. Nano science or nanotechnology has been validated to be a successful method as of targeting the drug to its active site be due to its special physicochemical properties and size thereby reducing the dose of administration, increasing bioavailability, and also reducing toxicity. Magnetic nanoparticles recently in few decades have proved as an effective advanced drug delivery system for its elevated magnetic responsiveness, biocompatibility, elevated targeted drug delivery effectiveness, etc. The drug can be easily targeted to active site by application of external magnetic field. Among the various elements, nanoparticles prepared with magnetically active iron oxide or other iron-based spinel oxide nanoparticles are widely used due to its high electrical resistivity, mechanical hardness, chemical stability, etc. Owing to their easy execution towards drug delivery application, extensive research has been carried out in this area. This review paper has summarized all recent modifications of iron-based magnetically active nanoparticle based drug delivery system along with their synthesis, characterization, and applications.

Extraction and optimization of Penicillium sclerotiorum strain AK-1 pigment for fabric dyeing.

Recently, the demand for fungal pigments has increased due to their several benefits over synthetic dyes. Many species of fungi are known to produce pigments and a large number of fungal strains for pigment production are yet to be extensively investigated. The natural pigment from sustainable natural sources has good economic and industrial value. Many synthetic colorants used in textile and various industries have many harmful effects on the human population and environment. Pigments and coloring agents may be extracted from a wide range of fungal species. These compounds are among the natural compounds having the most significant promise for medicinal, culinary, cosmetics, and textile applications. This study attempts to isolate and optimize the fermentation conditions of Penicillium sclerotiorum strain AK-1 for pigment production. A dark yellow-colored pigment was isolated from the strain with significant extractive value and antioxidant capacity. This study also identifies that the pigment does not have any cytotoxic effect and is multicomponent. The pigment production was optimized for the parameters such as pH, temperature, carbon and nitrogen source. Fabric dyeing experiments showed significant dyeing capacity of the pigment on cotton fabrics. Accordingly, the natural dye isolated from P. sclerotiorum strain AK-1 has a high potential for industrial-scale dyeing of cotton materials.

Osteoarthritis: Prognosis and emerging therapeutic approach for disease management.

Osteoarthritis (OA), a disorder of joints, is prevalent in older age. The contemporary cure for OA is aimed to confer symptomatic relief, consisting of temporary pain and swelling relief. In this paper, we discuss various modalities responsible for the onset of OA and associated with its severity. Inhibition of chondrocytes receptors such as DDR2, SDF-1, Asporin, and CXCR4 by specific pharmacological inhibitors attenuates OA, a critical step for finding potential disease modifying drugs. We critically analyzed recent OA studies with an emphasis on intermediate target molecules for OA intervention. We also explored some novel and safe treatments for OA by considering disease prognosis crosstalk with cellular signaling pathways.

Impacts of COVID-19 pandemic on the global energy system and the shift progress to renewable energy: Opportunities, challenges, and policy implications.

Being declared a global emergency, the COVID-19 pandemic has taken many lives, threatened livelihoods and businesses around the world. The energy industry, in particular, has experienced tremendous pressure resulting from the pandemic. In response to such a challenge, the development of sustainable resources and renewable energy infrastructure has demonstrated its potential as a promising and effective strategy. To sufficiently address the effect of COVID-19 on renewable energy development strategies, short-term policy priorities should be identified, while mid-term and long-term action plans should be formulated in achieving the well-defined renewable energy targets and progress towards a more sustainable energy future. In this review, opportunities, challenges, and significant impacts of the COVID-19 pandemic on current and future sustainable energy strategies were analyzed in detail; while drawing from experiences in identifying reasonable behaviors, orientating appropriate actions, and policy implications on the sustainable energy trajectory were also mentioned. Indeed, the question is that whether the COVID-19 pandemic will kill us or provide us with a precious lesson on future sustainable energy development.

The urgent need for integrated science to fight COVID-19 pandemic and beyond.

The COVID-19 pandemic has become the leading societal concern. The pandemic has shown that the public health concern is not only a medical problem, but also affects society as a whole; so, it has also become the leading scientific concern. We discuss in this treatise the importance of bringing the world's scientists together to find effective solutions for controlling the pandemic. By applying novel research frameworks, interdisciplinary collaboration promises to manage the pandemic's consequences and prevent recurrences of similar pandemics.

Genetic and virulence characterisation of Vibrio parahaemolyticus isolated from Indian coast.

BACKGROUND: V. parahaemolyticus is autochthonous to the marine environment and causes seafood-borne gastroenteritis in humans. Generally, V. parahaemolyticus recovered from the environment and/or seafood is thought to be non-pathogenic and the relationship between environmental isolates and acute diarrhoeal disease is poorly understood. In this study, we explored the virulence potential of environmental V. parahaemolyticus isolated from water, plankton and assorted seafood samples collected from the Indian coast. RESULTS: Twenty-two V. parahaemolyticus isolates from seafood harboured virulence associated genes encoding the thermostable-direct haemolysin (TDH), TDH-related haemolysin (TRH), and Type 3 secretion systems (T3SS) and 95.5% of the toxigenic isolates had pandemic strain attributes (toxRS/new+). Nine serovars, with pandemic strain traits were newly identified and an O4:K36 tdh-trh+V. parahaemolyticus bearing pandemic marker gene was recognised for the first time. Results obtained by reverse transcription PCR showed trh, T3SS1 and T3SS2ß to be functional in the seafood isolates. Moreover, the environmental strains were cytotoxic and could invade Caco-2 cells upon infection as well as induce changes to the tight junction protein, ZO-1 and the actin cytoskeleton. CONCLUSION: Our study provides evidence that environmental isolates of V. parahaemolyticus are potentially invasive and capable of eliciting pathogenic characteristics typical of clinical strains and present a potential health risk. We also demonstrate that virulence of this pathogen is highly complex and hence draws attention for the need to investigate more reliable virulence markers in order to distinguish the environmental and clinical isolates, which will be crucial for the pathogenomics and control of this pathogen.

Epidemiological and pathogenic characteristics of Haitian variant V. cholerae circulating in India over a decade (2000-2018).

Vibrio cholerae, causative agent of the water-borne disease cholera still threatens a large proportion of world's population. The major biotypes of the pathogen are classical and El Tor. There have been recent reports of variant V. cholerae strains circulating around the world. In the present study, the epidemiological status of V. cholerae strains circulating in the country over a decade was assessed. Also, a comprehensive analysis of the difference in pathogenicity between the different biotypes of V. cholerae strains was evaluated both in-vitro and in-vivo. The amount of CT produced by different biotypes of V. cholerae strains were analyzed by GM1 ELISA and the probable reasons for the difference in toxin production was discussed. MLST analysis grouped the isolates into a single Sequence Type (ST 69) whereas PFGE analysis clustered the isolates into ten different pulsotypes revealing molecular diversity. The circulating strains were identified to produce cholera toxin and CT mRNA intermediate to the classical and prototype El Tor strains. Also, the circulating strains were identified to possess four ToxR binding sequences. In-vivo pathogenicity analysis by rabbit ileal loop fluid accumulation assay revealed the Haitian variant strains to be more hyperemic than the prototype strains.

An overview of viscoelastic phase separation in epoxy based blends.

The viscoelastic effects during reaction induced phase separation play an important role in toughening epoxy-based blends. The large difference in molecular weight/glass transition temperature between the blend components before the curing reaction results in dynamic asymmetry, causing viscoelastic effects during phase separation accompanying the curing reaction. This review will focus on the key factors responsible for viscoelastic phase separation in epoxy-based blends and hybrid nanocomposites. Time-resolved characterization techniques such as rheometry, small angle laser light scattering, optical microscopy etc., are mainly used for monitoring the viscoelastic effects during phase separation. Incorporation of nanofillers in epoxy thermoplastic blends enhances the viscoelastic phase separation due to the increase in dynamic asymmetry. Different theoretical models are identified for the determination of processing parameters such as temperature, viscosity, phase domain size, and other parameters during the viscoelastic phase separation process. The effect of viscoelastic phase separation has a very strong influence on the domain parameters of the blends and thereby on the ultimate properties and applications.

Green Synthesis of Sodium Alginate Capped -CuInS2 Quantum Dots with Improved Fluorescence Properties.

CuInS2 (CIS) quantum dots (QDs) are known to be ideal fluorophores based on their low toxicity and tunable emission. However, due to low quantum yield (QY) and photostability, the surface is usually passivated by a higher bandgap shell (e.g. ZnS). This always resulted in a blue-shifted emission position which is not usually favourable for biological imaging. To address this problem, we herein report the passivation of green synthesized near infra-red emitting glutathione (GSH) capped CuInS2 QDs using different concentration of sodium alginate (SA) at different temperatures. The as-synthesized QDs are small (~ 3.2 nm), highly crystalline and emitted in the near infra-red region. The optical results showed a 36% increase in photostability and a 2-fold increase in quantum yield at ratio 1:8 (SA: CIS) which is suitable for prolonged biological imaging applications. Transmission electron microscope and X-ray diffraction (XRD) analyses showed that the materials are highly crystalline without any change in shape and size after passivation with the biopolymer. Graphical Abstract.

Positron annihilation spectroscopic characterization of free-volume defects and their correlations with the mechanical and transport properties of SBR-PMMA interpenetrating polymer networks.

A series of interpenetrating polymer networks (IPNs) and semi-interpenetrating polymer networks (s-IPNs) of styrene butadiene rubber (SBR) and poly(methyl methacrylate) (PMMA) have been synthesized by adopting the sequential interpenetration and in situ polymerization method. The size and the concentration of free volume defects in these systems are monitored and their variations accurately traced using positron annihilation lifetime (PALS) and coincidence Doppler broadening spectroscopic (CDBS) measurements. The morphologies of the IPNs were analyzed with transmission electron microscopy (TEM), scanning electron microscopy (SEM) and atomic force microscopy (AFM). Confocal Raman mapping had been employed to elucidate the mechanism of PMMA interpenetration in the SBR matrix with reference to the blend ratio. The results of free volume analysis lead to the conclusion that the increase of PMMA content in IPN was accompanied by enhancement of interpenetration in the system. Also the morphology changes from dispersed island pattern to a co-continuous one. Besides, the transport parameters and mechanical behavior of IPNs were studied in detail. The results of PALS and CDBS measurements have found to exhibit striking correlations with the sorption, mechanical properties and morphology of the polymer networks. The specific physics involved in the characterization protocol is effectively utilized to explore the chemistry of IPN formation. This new modality of characterization versus composition uplifts and widens the application prospects of elastomer-thermoplastic IPNs.

Deciphering the Cold Adaptive Mechanisms in Pseudomonas psychrophila MTCC12324 Isolated from the Arctic at 79° N.

Psychrophiles, host of cold environments, have been successfully undergoing the process of evolution by which they have acquired innate adaptations to withstand the unfavorable effects of low temperature. Psychrophiles renders immense opportunity to explore the underlying mechanisms of cold adaptation. The present study focused to explore the cold adaptive mechanisms of Pseudomonas psychrophila MTCC12324, a facultative psychrophilic bacterium isolated from the Ny-Alesund, an island in the Svalbard Archipelago (79°55' N, 11°56' E) in the Arctic. Whole genome sequencing of P. psychrophila MTCC12324 and its analysis revealed the redundant nature of genome and identified several cold acclimation genes including cold shock proteins, and chaperones involved in the adaptive mechanism to thrive in the cold environment. Comparative proteome analysis of P. psychrophila MTCC12324 at 4 °C and 25 °C has thrown lights on the metabolic pathways and cellular processes adopted to withstand the cold environment. Basic survival pathways and factors involved in energy metabolism were found to be unaltered whereas stress response factors, enzymes involved in fatty acid elongation and cold-adapted chaperones were found to be enhanced towards cold stress. The present study facilitates recognition of crucial factors including polyunsaturated fatty acid biosynthesis, mRNA chaperones, and other cold-inducible proteins which favors the bacteria in conferring cold adaptation.

Grape seed extract-soluplus dispersion and its antioxidant activity.

OBJECTIVE: The main objective of this work was to formulate a nanodispersion containing grape seed extract and analyzed its release profile, antioxidant potential of the prepared formulations. METHODS: The grape seed extract (GSE) containing proanthocyanidins (PC's) has been dispersed in polymer matrix soluplus (SOLU) by the freeze-drying method. The morphological analysis was carried out using atomic force microscopy (AFM), scanning electron microscopy (SEM) and Transmission electron microscopy (TEM). The in-vitro release of the nanodispersion formulations was evaluated by simulated intestinal fluid (SIF). The antioxidant activity of GSE and the formulation were evaluated by employing various in-vitro assays such as 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS), 2, 2-diphenyl-1- picrylhydrazyl (DPPH), Ferric reducing antioxidant power (FRAP) and peroxidation inhibiting activity. RESULTS: The formulation FIII (1:5) resulted in a stable formulation with a higher loading efficiency of 95.36%, a particle size of 69.90 nm, a polydispersity index of 0.154 and a zeta potential value of -82.10 mV. The antioxidant efficiency of GSE-SOLU evaluated by DPPH was found to be 96.7%. The ABTS and FRAP model exhibited a dose-dependent scavenging activity. Linoleic model of FIII formulation and GSE exhibited a 66.14 and 86.58% inhibition respectively at 200 µg/l. CONCLUSIONS: The main reason for excellent scavenging activity of the formulations can be attributed to the presence of monomeric, dimeric, oligomeric procyanidins and the phenolic group. The present work denotes that GSE constitutes a good source of PC's and will be useful in the prevention and treatment of free radical related diseases.