Imputation accuracy from low- to medium-density SNP chips for US crossbred dairy cattle.

This study aimed at evaluating the quality of imputation accuracy (IA) by marker (IAm) and by individual (IAi) in US crossbred dairy cattle. Holstein × Jersey crossbreds were used to evaluate IA from a low- (7K) to a medium-density (50K) SNP chip. Crossbred animals, as well as their sires (53), dams (77), and maternal grandsires (63), were all genotyped with a 78K SNP chip. Seven different scenarios of reference populations were tested, in which some scenarios used different family relationships and others added random unrelated purebred and crossbred individuals to those different family relationship scenarios. The same scenarios were tested on Holstein and Jersey purebred animals to compare these outcomes against those attained in crossbred animals. The genotype imputation was performed with findhap (version 4) software (VanRaden, 2015). There were no significant differences in IA results depending on whether the sire of imputed individuals was Holstein and the dam was Jersey, or vice versa. The IA increased significantly with the addition of related individuals in the reference population, from 86.70 ± 0.06% when only sires or dams were included in the reference population to 90.09 ± 0.06% when sire (S), dam (D), and maternal grandsire genomic data were combined in the reference population. In all scenarios including related individuals in the reference population, IAm and IAi were significantly superior in purebred Jersey and Holstein animals than in crossbreds, ranging from 90.75 ± 0.06 to 94.02 ± 0.06%, and from 90.88 ± 0.11 to 94.04 ± 0.10%, respectively. Additionally, a scenario called SPB+DLD(where PB indicates purebread and LD indicates low density), similar to the genomic evaluations performed on US crossbred dairy, was tested. In this scenario, the information from the 5 evaluated breeds (Ayrshire, Brown Swiss, Guernsey, Holstein, and Jersey) genotyped with a 50K SNP chip and genomic information from the dams genotyped with a 7K SNP chip were combined in the reference population, and the IAm and IAi were 80.87 ± 0.06% and 80.85 ± 0.08%, respectively. Adding randomly nonrelated genotyped individuals in the reference population reduced IA for both purebred and crossbred cows, except for scenario SPB+DLD, where adding crossbreds to the reference population increased IA values. Our findings demonstrate that IA for US Holstein × Jersey crossbred ranged from 85 to 90%, and emphasize the significance of designing and defining the reference population for improved IA.

Inbreeding depression for producer-recorded udder, metabolic, and reproductive diseases in US dairy cattle.

This study leveraged a growing dataset of producer-recorded phenotypes for mastitis, reproductive diseases (metritis and retained placenta), and metabolic diseases (ketosis, milk fever, and displaced abomasum) to investigate the potential presence of inbreeding depression for these disease traits. Phenotypic, pedigree, and genomic information were obtained for 354,043 and 68,292 US Holstein and Jersey cows, respectively. Total inbreeding coefficients were calculated using both pedigree and genomic information; the latter included inbreeding estimates obtained using a genomic relationship matrix and runs of homozygosity. We also generated inbreeding coefficients based on the generational inbreeding for recent and old pedigree inbreeding, for different run-of-homozygosity length classes, and for recent and old homozygous-by-descent segment-based inbreeding. Estimates on the liability scale revealed significant evidence of inbreeding depression for reproductive-disease traits, with an increase in total pedigree and genomic inbreeding showing a notable effect for recent inbreeding. However, we found inconsistent evidence for inbreeding depression for mastitis or any metabolic diseases. Notably, in Holsteins, the probability of developing displaced abomasum decreased with inbreeding, particularly for older inbreeding. Estimates of disease probability for cows with low, average, and high inbreeding levels did not significantly differ across any inbreeding coefficient and trait combination, indicating that although inbreeding may affect disease incidence, it likely plays a smaller role compared with management and environmental factors.

Dry matter intake in US Holstein cows: exploring the genomic and phenotypic impact of milk components and body weight composite.

Large data sets allow estimating feed required for individual milk components or body maintenance. Phenotypic regressions are useful for nutrition management, but genetic regressions are more useful in breeding programs. Dry matter intake (DMI) records from 8,513 lactations of 6,621 Holstein cows were predicted from phenotypes or genomic evaluations for milk components and body size traits. The mixed models also included days in milk, age-parity subclass, trial date, management group, and body weight change during 28- and 42-d feeding trials in mid-lactation. Phenotypic regressions of DMI on milk (0.014 ± 0.006), fat (3.06 ± 0.01), and protein (4.79 ± 0.25) were much less than corresponding genomic regressions (0.08 ± 0.03, 11.30 ± 0.47, and 9.35 ± 0.87) or sire genomic regressions multiplied by 2 (0.048 ± 0.04, 6.73 ± 0.94, and 4.98 ± 1.75). Thus, marginal feed costs as fractions of marginal milk revenue were higher from genetic than phenotypic regressions. According to the energy-corrected milk formula, fat production requires 69% more DMI than protein production. In the phenotypic regression, it was estimated that protein production requires 56% more DMI than fat. However, the genomic regression for the animal showed a difference of only 21% more DMI for protein compared with fat, while the sire genomic regressions indicated approximately 35% more DMI for fat than protein. Estimates of annual maintenance in kg DMI / kg body weight/lactation were similar from phenotypic regression (5.9 ± 0.14), genomic regression (5.8 ± 0.31), and sire genomic regression multiplied by 2 (5.3 ± 0.55) and are larger than those estimated by NASEM (2021) based on NEL equations. Multiple regressions on genomic evaluations for the 5 type traits in body weight composite (BWC) showed that strength was the type trait most associated with body weight and DMI, agreeing with the current BWC formula, whereas other traits were less useful predictors, especially for DMI. The Net Merit formula used to weight different genetic traits to achieve an economically optimal overall selection response was revised in 2021 to better account for these estimated regressions. To improve profitability, breeding programs should select smaller cows with negative residual feed intake that produce more milk, fat, and protein.

Grid search approach to discriminate between old and recent inbreeding using phenotypic, pedigree and genomic information.

BACKGROUND: Although inbreeding caused by the mating of animals related through a recent common ancestor is expected to have more harmful effects on phenotypes than ancient inbreeding (old inbreeding), estimating these effects requires a clear definition of recent (new) and ancient (old) inbreeding. Several methods have been proposed to classify inbreeding using pedigree and genomic data. Unfortunately, these methods are largely based on heuristic criteria such as the number of generations from a common ancestor or length of runs of homozygosity (ROH) segments. To mitigate these deficiencies, this study aimed to develop a method to classify pedigree and genomic inbreeding into recent and ancient classes based on a grid search algorithm driven by the assumption that new inbreeding tends to have a more pronounced detrimental effect on traits. The proposed method was tested using a cattle population characterized by a deep pedigree. RESULTS: Effects of recent and ancient inbreeding were assessed on four growth traits (birth, weaning and yearling weights and average daily gain). Thresholds to classify inbreeding into recent and ancient classes were trait-specific and varied across traits and sources of information. Using pedigree information, inbreeding generated in the last 10 to 11 generations was considered as recent. When genomic information (ROH) was used, thresholds ranged between four to seven generations, indicating, in part, the ability of ROH segments to characterize the harmful effects of inbreeding in shorter periods of time. Nevertheless, using the proposed classification method, the discrimination between new and old inbreeding was less robust when ROH segments were used compared to pedigree. Using several model comparison criteria, the proposed approach was generally better than existing methods. Recent inbreeding appeared to be more harmful across the growth traits analyzed. However, both new and old inbreeding were found to be associated with decreased yearling weight and average daily gain. CONCLUSIONS: The proposed method provided a more objective quantitative approach for the classification of inbreeding. The proposed method detected a clear divergence in the effects of old and recent inbreeding using pedigree data and it was superior to existing methods for all analyzed traits. Using ROH data, the discrimination between old and recent inbreeding was less clear and the proposed method was superior to existing approaches for two out of the four analyzed traits. Deleterious effects of recent inbreeding were detected sooner (fewer generations) using genomic information than pedigree. Difference in the results using genomic and pedigree information could be due to the dissimilarity in the number of generations to a common ancestor. Additionally, the uncertainty associated with the identification of ROH segments and associated inbreeding could have an effect on the results. Potential biases in the estimation of inbreeding effects may occur when new and old inbreeding are discriminated based on arbitrary thresholds. To minimize the impact of inbreeding, mating designs should take the different inbreeding origins into consideration.

Increasing accuracy of genomic selection in presence of high density marker panels through the prioritization of relevant polymorphisms.

BACKGROUND: It becomes clear that the increase in the density of marker panels and even the use of sequence data didn't result in any meaningful increase in the accuracy of genomic selection (GS) using either regression (RM) or variance component (VC) approaches. This is in part due to the limitations of current methods. Association model are well over-parameterized and suffer from severe co-linearity and lack of statistical power. Even when the variant effects are not directly estimated using VC based approaches, the genomic relationships didn't improve after the marker density exceeded a certain threshold. SNP prioritization-based fixation index (FST) scores were used to track the majority of significant QTL and to reduce the dimensionality of the association model. RESULTS: Two populations with average LD between adjacent markers of 0.3 (P1) and 0.7 (P2) were simulated. In both populations, the genomic data consisted of 400 K SNP markers distributed on 10 chromosomes. The density of simulated genomic data mimics roughly 1.2 million SNP markers in the bovine genome. The genomic relationship matrix (G) was calculated for each set of selected SNPs based on their FST score and similar numbers of SNPs were selected randomly for comparison. Using all 400 K SNPs, 46% of the off-diagonal elements (OD) were between - 0.01 and 0.01. The same portion was 31, 23 and 16% when 80 K, 40 K and 20 K SNPs were selected based on FST scores. For randomly selected 20 K SNP subsets, around 33% of the OD fell within the same range. Genomic similarity computed using SNPs selected based on FST scores was always higher than using the same number of SNPs selected randomly. Maximum accuracies of 0.741 and 0.828 were achieved when 20 and 10 K SNPs were selected based on FST scores in P1 and P2, respectively. CONCLUSIONS: Genomic similarity could be maximized by the decrease in the number of selected SNPs, but it also leads to a decrease in the percentage of genetic variation explained by the selected markers. Finding the balance between these two parameters could optimize the accuracy of GS in the presence of high density marker panels.

High density marker panels, SNPs prioritizing and accuracy of genomic selection.

BACKGROUND: The availability of high-density (HD) marker panels, genome wide variants and sequence data creates an unprecedented opportunity to dissect the genetic basis of complex traits, enhance genomic selection (GS) and identify causal variants of disease. The disproportional increase in the number of parameters in the genetic association model compared to the number of phenotypes has led to further deterioration in statistical power and an increase in co-linearity and false positive rates. At best, HD panels do not significantly improve GS accuracy and, at worst, reduce accuracy. This is true for both regression and variance component approaches. To remedy this situation, some form of single nucleotide polymorphisms (SNP) filtering or external information is needed. Current methods for prioritizing SNP markers (i.e. BayesB, BayesCπ) are sensitive to the increased co-linearity in HD panels which could limit their performance. RESULTS: In this study, the usefulness of FST, a measure of allele frequency variation among populations, as an external source of information in GS was evaluated. A simulation was carried out for a trait with heritability of 0.4. Data was divided into three subpopulations based on phenotype distribution (bottom 5%, middle 90%, top 5%). Marker data were simulated to mimic a 770 K and 1.5 million SNP marker panel. A ten-chromosome genome with 200 K and 400 K SNPs was simulated. Several scenarios with varying distributions for the quantitative trait loci (QTL) effects were simulated. Using all 200 K markers and no filtering, the accuracy of genomic prediction was 0.77. When marker effects were simulated from a gamma distribution, SNPs pre-selected based on the 99.5, 99.0 and 97.5% quantile of the FST score distribution resulted in an accuracy of 0.725, 0.797, and 0.853, respectively. Similar results were observed under other simulation scenarios. Clearly, the accuracy obtained using all SNPs can be easily achieved using only 0.5 to 1% of all markers. CONCLUSIONS: These results indicate that SNP filtering using already available external information could increase the accuracy of GS. This is especially important as next-generation sequencing technology becomes more affordable and accessible to human, animal and plant applications.

Correction to: High density marker panels, SNPs prioritizing and accuracy of genomic selection.

CORRECTION TO: BMC GENETICS (2018) 19:4 DOI: 10.1186/S12863-017-0595-2: The original version of this article [1], published on 5 January 2018, contained 3 formatting errors. In this Correction the affected parts of the article are shown. The original article has been updated.

Implementation of Feed Efficiency in Iranian Holstein Breeding Program.

This study aimed to evaluate the economic impact of improving feed efficiency on breeding objectives for Iranian Holsteins. Production and economic data from seven dairy herds were used to estimate the economic values of different traits, and a meta-analysis was conducted to analyze the genetic relationships between feed efficiency and other traits. Economic weights were calculated for various traits, with mean values per cow and per year across herds estimated at USD 0.34/kg for milk yield, USD 6.93/kg for fat yield, USD 5.53/kg for protein yield, USD -1.68/kg for dry matter intake, USD -1.70/kg for residual feed intake, USD 0.47/month for productive life, and USD -2.71/day for days open. The Iranian selection index was revised to improve feed efficiency, and the feed efficiency sub-index (FE$) introduced by the Holstein Association of the United States of America was adopted to reflect Iran's economic and production systems. However, there were discrepancies between Iranian and US genetic coefficients in the sub-index, which could be attributed to differences in genetic and phenotypic parameters, as well as the economic value of each trait. More accurate estimates of economic values for each trait in FE$ could be obtained by collecting dry matter intake from Iranian herds and conducting genetic evaluations for residual feed intake.

Genetic analysis of retained placenta and its association with reproductive disorder, production, and fertility traits of Iranian Holstein dairy cows.

To facilitate breeding for improved resistance to the reproductive disorder of retained placenta (RP), genetic parameters were estimated for RP and its genetic correlation with other reproductive disorders as well as with production and fertility traits of Iranian Holstein dairy cows. Data were 154,048 lactation records collected between 2011 and 2018 from 59,610 Holstein dairy cows in 9 Iranian herds. Other reproductive disorders included dystocia, stillbirth, and twinning. Fertility records were available for days from calving to first service (DFS), days open (DO), number of inseminations per conception (NIC), and success of first insemination (SFI). Genetic parameters for RP were estimated using univariate linear and logistic animal models with ASREML software. The univariate linear animal model was used to implement bivariate analysis to investigate potential genetic correlations of RP with other reproductive disorders and with production and fertility traits. Heritability estimates for RP were low from both linear (0.031) and logistic (0.092) animal models. Estimated genetic correlations with RP were -0.04 for twinning, 0.32 for stillbirth, and 0.34 for dystocia, which indicates that selection against RP could indirectly select against dystocia and stillbirth. Estimated genetic correlations between RP and production traits (milk, fat, and protein yields) at 100, 200, and 305 d in milk ranged from -0.12 to -0.29; the greatest correlation (-0.29) was for the first 100 d in milk. A moderate positive genetic correlation (0.25) was found for RP and DO, DFS, and NIC, whereas a low negative genetic correlation (-0.09) was found between RP and SFI. The pedigree-based genetic analysis of RP showed that this trait has a low heritability, is linked to other reproductive disorders, and generally has an unfavorable relationship with production and fertility traits. Selection against RP can reduce the incidence of reproductive disorders and improve fertility and production traits.

Genetic architecture of a composite beef cattle population.

Composite breeds are widely used in the beef industry. Composites allow producers to combine desirable traits from the progenitor breeds and simplify herd management, without repeated crossbreeding and maintenance of purebreds. In this study, genomic information was used to evaluate the genetic composition and characteristics of a three-breed beef cattle composite. This composite population referred to as Composite Gene Combination (CGC) consisted of 50% Red Angus, 25% Charolais, and 25% Tarentaise. A total of 248 animals were used in this study: CGC (n = 79), Red Angus (n = 61), Charolais (n = 79), and Tarentaise (n = 29). All animals were genotyped with 777k HD panel. Principal component and ADMIXTURE analyses were carried out to evaluate the genetic structure of CGC animals. The ADMIXTURE revealed the proportion of Tarentaise increased to approximately 57%, whereas Charolais decreased to approximately 5% and Red Angus decreased to 38% across generations. To evaluate these changes in the genomic composition across different breeds and in CGC across generations, runs of homozygosity (ROH) were conducted. This analysis showed Red Angus to have the highest total length of ROH segments per animal with a mean of 349.92 Mb and lowest in CGC with a mean of 141.10 Mb. Furthermore, it showed the formation of new haplotypes in CGC around the sixth generation. Selection signatures were evaluated through Fst and HapFlk analyses. Several selection sweeps in CGC were identified especially in chromosomes 5 and 14 which have previously been reported to be associated with coat color and growth traits. The study supports our previous findings that progenitor combinations are not stable over generations and that either direct or natural selection plays a role in modifying the progenitor proportions. Furthermore, the results showed that Tarentaise contributed useful attributes to the composite in a cool semi-arid environment and suggests a re-exploration of this breed's role may be warranted.

Composite breeds are commonly used in the U.S. beef industry since they provide producers with benefits such as breed complementarity and retained heterosis. However, cattle composite genomes are not well characterized. Therefore, in this study, genomic information was used to evaluate the genetic composition and characteristics of a three-breed composite (50% Red Angus, 25% Charolais, and 25% Tarentaise). The analysis showed an increase in the proportion of Tarentaise to approximately 57%, whereas Charolais decreased to approximately 5% and Red Angus decreased to 38%. Furthermore, new genome segments formed around the sixth generation. These changes show that progenitor breed proportions are not stable over generations and that either direct or natural selection plays a role in modifying the proportions. The increase in Tarentaise proportion suggests useful attributes to the composite in a cool semi-arid environment.

Runs of homozygosity and analysis of inbreeding depression.

Pedigree information was traditionally used to assess inbreeding. The availability of high-density marker panels provides an alternative to assess inbreeding, particularly in the presence of incomplete and error-prone pedigrees. Assessment of autozygosity across chromosomal segments using runs of homozygosity (ROH) has emerged as a valuable tool to estimate inbreeding due to its general flexibility and ability to quantify the chromosomal contribution to genome-wide inbreeding. Unfortunately, the identification of ROH segments is sensitive to the parameters used during the search process. These parameters are heuristically set, leading to significant variation in the results. The minimum length required to identify an ROH segment has major effects on the estimation of inbreeding and inbreeding depression, yet it is arbitrarily set. To overcome this limitation, a search algorithm to approximate mutation enrichment was developed to determine the minimum length of ROH segments. It consists of finding genome segments with significant effect differences in trait means between animals with high and low burdens of autozygous intervals with a specific length. The minimum length could be determined heuristically as the smallest interval at which a significant signal is detected. The proposed method was tested in an inbred Hereford cattle population genotyped for 30,220 SNPs. Phenotypes recorded for six traits were used for the approximation of mutation loads. The estimated minimum length was around 1 Mb for yearling weight (YW) and average daily gain (ADG) and 4 Mb for birth weight and weaning weight. These trait-specific thresholds estimated using the proposed method could be attributed to a trait-dependent effect of homozygosity. The detection of significant inbreeding effects was well aligned with the estimated thresholds, especially for YW and ADG. Although highly deleterious alleles are expected to be more frequent in recent inbreeding (long ROH), short ROH segments (<5 Mb) could contain a large number of less deleterious mutations with substantial joint effects on some traits (YW and ADG). Our results highlight the importance of accurate estimation of the ROH-based inbreeding and the necessity to consider a trait-specific minimum length threshold for the identification of ROH segments in inbreeding depression analyses. These thresholds could be determined using the proposed method provided the availability of phenotypic information.

A Weighted Genomic Relationship Matrix Based on Fixation Index (FST) Prioritized SNPs for Genomic Selection.

A dramatic increase in the density of marker panels has been expected to increase the accuracy of genomic selection (GS), unfortunately, little to no improvement has been observed. By including all variants in the association model, the dimensionality of the problem should be dramatically increased, and it could undoubtedly reduce the statistical power. Using all Single nucleotide polymorphisms (SNPs) to compute the genomic relationship matrix (G) does not necessarily increase accuracy as the additive relationships can be accurately estimated using a much smaller number of markers. Due to these limitations, variant prioritization has become a necessity to improve accuracy. The fixation index (FST) as a measure of population differentiation has been used to identify genome segments and variants under selection pressure. Using prioritized variants has increased the accuracy of GS. Additionally, FST can be used to weight the relative contribution of prioritized SNPs in computing G. In this study, relative weights based on FST scores were developed and incorporated into the calculation of G and their impact on the estimation of variance components and accuracy was assessed. The results showed that prioritizing SNPs based on their FST scores resulted in an increase in the genetic similarity between training and validation animals and improved the accuracy of GS by more than 5%.

Inbreeding depression in line 1 Hereford cattle population using pedigree and genomic information.

This study aimed at assessing inbreeding and its effect on growth and fertility traits using the longtime closed line 1 Hereford cattle population. Inbreeding was estimated based on pedigree (FPED) and genomic information. For the latter, three estimates were derived based on the diagonal elements of the genomic relationship matrix using estimated (FGRM) or fixed (FGRM0.5) minor allele frequencies or runs of homozygosity (ROH) (FROH). A pedigree containing 10,186 animals was used to calculate FPED. Genomic inbreeding was evaluated using 785 animals genotyped for 30,810 SNP. Traits analyzed were birth weight (BWT), weaning weight (WWT), yearling weight (YWT), ADG, and age at first calving (AFC). The number of ROH per animal ranged between 6 and 119 segments with an average of 83. The shortest and longest segments were 1.36 and 64.86 Mb long, respectively, reflecting both ancient and recent inbreeding occurring in the last 30 to 40 generations. The average inbreeding was 29.2%, 16.1%, 30.2%, and 22.9% for FPED, FGRM, FGRM0.5, and FROH, respectively. FROH provided the highest correlations with FPED (r = 0.66). Across paternal half-sib families, with minimal variation in FPED, there were substantial variations in their genomic inbreeding. Inbreeding depression analyses showed that a 1% increase in an animal's FPED resulted in a decrease of 1.20 kg, 2.03 kg, and 0.004 kg/d in WWT, YWT, and ADG, respectively. Maternal inbreeding showed significantly negative effects on progeny growth performance. AFC increased by 1.4 and 0.8 d for each 1% increase in FPED of the cow and her dam, respectively. Using genomic inbreeding, similar impact on growth traits was observed although the magnitude of the effect varied between methods. Across all genomic measures, WWT, YWT, and ADG decreased by 0.21 to 0.53 kg, 0.46 to 1.13 kg, and 0.002 to 0.006 kg/d for each 1% increase in genomic inbreeding, respectively. Four chromosomes (9, 12, 17, and 27) were identified to have a significant association between their homozygosity (FROH-CHR) and growth traits. Variability in genomic inbreeding could be useful when deciding between full and half-sib selection candidates. Despite the high level of inbreeding in this study, its negative impact on growth performance was not as severe as expected, which may be attributed to the purging of the deleterious alleles due to natural or artificial selection over time.